[U-Boot] [PATCH] ARC: AXS10x: DTS: remove unused interrupts properties

[Eugeniy Paltsev]

Some device tree nodes (like ethernet, ohci, ehci) in axs10x_mb.dtsi
were copied from linux device tree, so they have interrupts properties.
As we don't use interrupts in uboot we don't have interrupt controller
node in AXS10x device tree. In result we get warnings when we compile
such device tree.
So remove unused interrupts properties to get rid of this warnings.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
---
 arch/arc/dts/axs10x_mb.dtsi | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/arc/dts/axs10x_mb.dtsi b/arch/arc/dts/axs10x_mb.dtsi
index b74d3c8..17ef656 100644
--- a/arch/arc/dts/axs10x_mb.dtsi
+++ b/arch/arc/dts/axs10x_mb.dtsi
@@ -31,11 +31,8 @@
 		};
 
 		ethernet at 18000 {
-			#interrupt-cells = <1>;
 			compatible = "altr,socfpga-stmmac";
 			reg = < 0x18000 0x2000 >;
-			interrupts = < 25 >;
-			interrupt-names = "macirq";
 			phy-mode = "gmii";
 			snps,pbl = < 32 >;
 			clocks = <&apbclk>;
@@ -46,13 +43,11 @@
 		ehci at 0x40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
-			interrupts = < 8 >;
 		};
 
 		ohci at 0x60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
-			interrupts = < 8 >;
 		};
 
 		uart0: serial0 at 22000 {
-- 
2.9.3