[U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK

[Diego Dorta]

Hi Peng,

2018-01-10 3:20 GMT-02:00 Peng Fan <peng.fan at nxp.com>:
> This patchset is to add i.MX8M and i.MX8MQ-EVK support
>
> V5:
>  Drop wait_mask_set/clr_timeout and switch to use readl_poll_timeout in
>  the patchset.
>
> V4:
>  Regenerate patchset based on Tom's master tree.
>  In this patchset, https://patchwork.ozlabs.org/patch/855027/
>  "arm: imx: Rework i.MX specific commands to be excluded from SPL" from
>  Tom is included to avoid merge conflicts because the i.mx8m change
>  also has some modification to bootaux and arch/arm/mach-imx/Makefile.
>  Because CONFIG_GPT_TIMER change, I did a small modification to apply
>  Tom's patch, no function change.
>
>  Include ATF link in README.
>
> V3:
>  This patchset based on https://patchwork.ozlabs.org/patch/855027/
>  "arm: imx: Rework i.MX specific commands to be excluded from SPL" from
>  Tom to avoid this patchset fail apply after Tom's patch merged.
>
>  Previously "power: pmic/regulator allow dm be omited by SPL" broke other
>  boards, in V3 patchset, only touch pfuze100 related options.
>
>  Sharing code about get mac from fuse between mx7/mx8m
>  Sharing code about bootaux between mx6/7/mx8m
>  Sharing code about cpu speed grade between mx7/mx8m
>  Sharing code about get boot device between mx7/mx8m
>  Sharding code about mmc env between mx7/mx8m
>
>  Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll configuration
>
>  Correct authorship of fix building warning on fec arm64, patch 27/31.
>
>  Switch to use structure for DDR Controller. For DDR PHY registers,
>  there are about more than 10 thousands registers, I could not convert
>  them with detailed register name, and the script is generated from IC team,
>  So I use regs[0xxxxx] arrays here fo easily converting between IC team
>  released script and uboot ddr phy cod.
>
>  Improve REAMME file to include where to download firmware and imx-mkimage
>  and how to build
>
>  Add review tags on the V2 patchset.
>
>  Hope this patchset could catch up next release :)
>
> V2:
>
>  patch 02/23: convert to structure, drop is_boot_from_usb and
>               disconnect_from_usb
>  patch 04/23: conver to use structure for the clock driver, removed the
>               CCM_xxx macros. Add static for local functons.
>               Add init_usdhc_clk, init_uart_clk and etc to not enable
>               them all at default.
>  patch 05/23: Add more commit msg for the sip part.
>  patch 08/23: Merge the spl boot device with i.MX7
>  patch 12/23: Typo fix and return error fix from Heiko for the SoC related part
>  patch 22/23: Use a weak function ddr_init. If patch 23/23 could not be
>               accepted at current stage, to make others still be could be
>               compiled.
>
> The patchset depends on
> https://patchwork.ozlabs.org/patch/841934/
> https://patchwork.ozlabs.org/patch/841958/
> to be tested on real hardware.
>
> V1:
>
> patch: "power: pmic.h: include dm/ofnode.h" and
> "power: pmic/regulator allow dm be omited by SPL" is previously reviewed
> in mailist to not merged. If no issue, you may pick it up.
>
> The board support is a large patch because of the ddr related code.
> If it is not good, please first review/pick-up other patches if they
> are ok.
>
>
>
> Peng Fan (29):
>   imx: add i.MX8M into Kconfig
>   imx: mx8m: add register definition header file
>   imx: mx8m: add pin header file
>   imx: mx8m: add clock driver
>   imx: add sip function
>   imx: boot_mode: add USB_BOOT entry
>   imx: cpu: update cpu file to support i.MX8M
>   imx: spl: implement spl_boot_device for i.MX8M
>   imx: add i.MX8MQ SoC Revision and is_mx8m helper
>   imx: add pad settings bit definition for i.MX8M
>   imx: cpu: move speed/temp to common cpu
>   imx: cpu: add cpu speed/grade for i.MX8M
>   imx: refactor imx_get_mac_from_fuse
>   imx: cleanup bootaux
>   imx: bootaux: support i.MX8M
>   imx: mx7: move get_boot_device to cpu.c
>   imx: cpu: support get_boot_device for i.MX8M
>   imx: mx7: move mmc env code to mmc_env.c
>   imx: mx8m: add soc related settings and files
>   imx: makefile: compile files for i.MX8M
>   misc: ocotp: add i.MX8M support
>   mmc: fsl_esdhc: support i.MX8M
>   imx: lcdif: include i.MX8M
>   gpio: mxc: add i.MX8M support
>   net: fec: do not access reserved register for i.MX8M
>   imx: imx8mq: add dtsi file
>   power: pmic/regulator allow dm be omitted by SPL
>   imx: mx8m: add ddr controller memory map
>   imx: add i.MX8MQ EVK support
>
> Tom Rini (1):
>   arm: imx: Rework i.MX specific commands to be excluded from SPL
>
> Ye Li (1):
>   net: fec: fix build warnings for 64bits support
>

I was able to run your patchset on my board.

For the whole series:

Tested-by: Diego Dorta <diego.dorta at nxp.com>

Thanks,
Diego