[U-Boot] [PATCH v3 11/15] pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig
Alexander Graf
agraf at suse.de
Thu Jan 25 11:05:52 UTC 2018
We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.
This round goes to pl01x.
Signed-off-by: Alexander Graf <agraf at suse.de>
---
arch/arm/Kconfig | 11 +++++++++++
drivers/serial/Kconfig | 6 ++++++
include/configs/hikey.h | 3 ---
include/configs/integrator-common.h | 2 --
include/configs/poplar.h | 3 ---
include/configs/qemu-arm.h | 3 ---
include/configs/rpi.h | 1 -
include/configs/stv0991.h | 3 ---
include/configs/thunderx_88xx.h | 1 -
include/configs/vexpress_aemv8a.h | 1 -
scripts/config_whitelist.txt | 1 -
11 files changed, 17 insertions(+), 18 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1557e7cfdf..b2345eaa26 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config TARGET_STV0991
select DM_SPI
select DM_SPI_FLASH
select SPI_FLASH
+ select PL01X_SERIAL
config TARGET_X600
bool "Support x600"
@@ -548,6 +549,7 @@ config ARCH_BCM283X
select DM_SERIAL
select DM_GPIO
select OF_CONTROL
+ select PL01X_SERIAL
imply FAT_WRITE
config TARGET_VEXPRESS_CA15_TC2
@@ -630,6 +632,7 @@ config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select DM
select DM_SERIAL
+ select PL01X_SERIAL
config ARCH_KEYSTONE
bool "TI Keystone"
@@ -697,6 +700,7 @@ config ARCH_QEMU
select DM
select DM_SERIAL
select OF_CONTROL
+ select PL01X_SERIAL
config ARCH_RMOBILE
bool "Renesas ARM SoCs"
@@ -835,15 +839,18 @@ config TEGRA
config TARGET_VEXPRESS64_AEMV8A
bool "Support vexpress_aemv8a"
select ARM64
+ select PL01X_SERIAL
config TARGET_VEXPRESS64_BASE_FVP
bool "Support Versatile Express ARMv8a FVP BASE model"
select ARM64
select SEMIHOSTING
+ select PL01X_SERIAL
config TARGET_VEXPRESS64_BASE_FVP_DRAM
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
select ARM64
+ select PL01X_SERIAL
help
This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
the default config to allow the user to load the images directly into
@@ -853,6 +860,7 @@ config TARGET_VEXPRESS64_BASE_FVP_DRAM
config TARGET_VEXPRESS64_JUNO
bool "Support Versatile Express Juno Development Platform"
select ARM64
+ select PL01X_SERIAL
config TARGET_LS2080A_EMU
bool "Support ls2080a_emu"
@@ -945,6 +953,7 @@ config TARGET_HIKEY
select DM_GPIO
select DM_SERIAL
select OF_CONTROL
+ select PL01X_SERIAL
help
Support for HiKey 96boards platform. It features a HI6220
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -956,6 +965,7 @@ config TARGET_POPLAR
select OF_CONTROL
select DM_SERIAL
select DM_USB
+ select PL01X_SERIAL
help
Support for Poplar 96boards EE platform. It features a HI3798cv200
SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -1211,6 +1221,7 @@ config TARGET_THUNDERX_88XX
select ARM64
select OF_CONTROL
select SYS_CACHE_SHIFT_7
+ select PL01X_SERIAL
config ARCH_ASPEED
bool "Support Aspeed SoCs"
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 99aa817e63..4167683885 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,6 +459,12 @@ config PL011_SERIAL
help
Select this to enable a UART for platforms using PL011.
+config PL01X_SERIAL
+ bool "ARM PL010 and PL011 driver"
+ depends on DM_SERIAL
+ help
+ Select this to enable a UART for platforms using PL010 or PL011.
+
config ROCKCHIP_SERIAL
bool "Rockchip on-chip UART support"
depends on DM_SERIAL && SPL_OF_PLATDATA
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 7eaa6e4667..aaddf4c1f1 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -50,9 +50,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
-
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
/*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index edc798b117..f66d954748 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -15,8 +15,6 @@
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/poplar.h b/include/configs/poplar.h
index 8a12b526a8..9641b27b1b 100644
--- a/include/configs/poplar.h
+++ b/include/configs/poplar.h
@@ -26,9 +26,6 @@
/* ATF bl33.bin load address (must match) */
#define CONFIG_SYS_TEXT_BASE 0x37000000
-/* PL010/PL011 */
-#define CONFIG_PL01X_SERIAL
-
/* USB configuration */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index c8852cef34..c8ba78d8aa 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -20,9 +20,6 @@
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
#define CONFIG_SYS_MALLOC_LEN SZ_16M
-/* QEMU's PL011 serial port is detected via FDT using the device model */
-#define CONFIG_PL01X_SERIAL
-
/* QEMU implements a 62.5MHz architected timer */
/* FIXME: can we rely on CNTFREQ instead of hardcoding this fact here? */
#define CONFIG_SYS_ARCH_TIMER
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 2c84cf9a49..5ffe98015f 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -77,7 +77,6 @@
/* Console UART, can be configured dynamically in config.txt */
#define CONFIG_BCM283X_MU_SERIAL
-#define CONFIG_PL01X_SERIAL
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index c99fb676cb..3e0b8a157f 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -25,9 +25,6 @@
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
-/* serial port (PL011) configuration */
-#define CONFIG_PL01X_SERIAL
-
/* user interface */
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 209a7c3417..34940efb41 100644
--- a/include/configs/thunderx_88xx.h
+++ b/include/configs/thunderx_88xx.h
@@ -35,7 +35,6 @@
/* PL011 Serial Configuration */
-#define CONFIG_PL01X_SERIAL
#define CONFIG_PL011_CLOCK 24000000
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index f18e2ee068..07cc92ce17 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -110,7 +110,6 @@
/* PL011 Serial Configuration */
#define CONFIG_CONS_INDEX 0
-#define CONFIG_PL01X_SERIAL
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define CONFIG_PL011_CLOCK 7273800
#else
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index a4159ebb36..6e4e322986 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1628,7 +1628,6 @@ CONFIG_PIXIS_BRDCFG1_TDM
CONFIG_PIXIS_SGMII_CMD
CONFIG_PL011_CLOCK
CONFIG_PL011_SERIAL_RLCR
-CONFIG_PL01X_SERIAL
CONFIG_PL01x_PORTS
CONFIG_PLATFORM_ENV_SETTINGS
CONFIG_PLATINUM_BOARD
--
2.12.3
More information about the U-Boot
mailing list