[U-Boot] [GIT PULL] Please pull u-boot-mmc master

[Tom Rini]

On Mon, Jan 15, 2018 at 11:35:05AM +0900, Jaehoon Chung wrote:

> Dear Tom,
> 
> Could you pull these patches to u-boot/master?
> Main topic is the support for HS200/UHS mode. 
> If there are any problem, let me know. After applying to u-boot/master, will apply the other patches.
> 
> The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
> 
>   Prepare v2018.01 (2018-01-08 20:25:29 -0500)
> 
> are available in the Git repository at:
> 
>   git://git.denx.de/u-boot-mmc.git master
> 
> for you to fetch changes up to db359efd5907edbeaea2e3eb3504729f60208cd8:
> 
>   mmc: fsl_esdhc: Fix eMMC 1.8v setting issue (2018-01-13 00:08:44 +0900)
> 

Applied to u-boot/master, thanks!

But please note the following issues from checkpatch that need to be
looked into and possibly followed up on:
CHECK: Macro argument reuse 'mwt' - possible side-effects?
#180: FILE: drivers/mmc/mmc.c:1245:
+#define for_each_sd_mode_by_pref(caps, mwt) \
+	for (mwt = sd_modes_by_pref;\
+	     mwt < sd_modes_by_pref + ARRAY_SIZE(sd_modes_by_pref);\
+	     mwt++) \
+		if (caps & MMC_CAP(mwt->mode))

total: 0 errors, 0 warnings, 1 checks, 265 lines checked
CHECK: Macro argument reuse 'mwt' - possible side-effects?
#159: FILE: drivers/mmc/mmc.c:1382:
+#define for_each_mmc_mode_by_pref(caps, mwt) \
+	for (mwt = mmc_modes_by_pref;\
+	    mwt < mmc_modes_by_pref + ARRAY_SIZE(mmc_modes_by_pref);\
+	    mwt++) \
+		if (caps & MMC_CAP(mwt->mode))

CHECK: Macro argument reuse 'ecbv' - possible side-effects?
#177: FILE: drivers/mmc/mmc.c:1400:
+#define for_each_supported_width(caps, ddr, ecbv) \
+	for (ecbv = ext_csd_bus_width;\
+	    ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
+	    ecbv++) \
+		if ((ddr == ecbv->is_ddr) && (caps & ecbv->cap))

CHECK: Alignment should match open parenthesis
#253: FILE: drivers/mmc/mmc.c:1437:
+			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
+				    EXT_CSD_BUS_WIDTH,

WARNING: 'occured' may be misspelled - perhaps 'occurred'?
#292: FILE: drivers/mmc/mmc.c:1469:
+			/* if an error occured, revert to a safer bus mode */

total: 0 errors, 1 warnings, 3 checks, 320 lines checked
WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#7: 
function ignore this. Modify mmc_set_ios() and the callers of mmc_set_ios() to

total: 0 errors, 1 warnings, 0 checks, 46 lines checked
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
#30: FILE: drivers/mmc/mmc-uclass.c:100:
+		return -ENOSYS;

total: 0 errors, 1 warnings, 0 checks, 60 lines checked
WARNING: 'capabilites' may be misspelled - perhaps 'capabilities'?
#6: 
Add UHS modes to the list of supported modes, get the UHS capabilites of

total: 0 errors, 5 warnings, 0 checks, 381 lines checked
WARNING: line over 80 characters
#59: FILE: drivers/mmc/mmc.c:2217:
+		debug("Unable to do a full power cycle. Disabling the UHS modes for safety\n");

total: 0 errors, 1 warnings, 0 checks, 50 lines checked
WARNING: 'optionnal' may be misspelled - perhaps 'optional'?
#13: 
To make it clear that those are optionnal workarounds, a new Kconfig

total: 0 errors, 1 warnings, 0 checks, 102 lines checked
WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#6: 
The SDcard initialization procedure does a few more things than it did earlier:

total: 0 errors, 1 warnings, 0 checks, 13 lines checked
WARNING: please write a paragraph that describes the config symbol fully
#50: FILE: common/spl/Kconfig:419:
+config SPL_MMC_WRITE

WARNING: please write a paragraph that describes the config symbol fully
#69: FILE: drivers/mmc/Kconfig:13:
+config MMC_WRITE

total: 0 errors, 2 warnings, 0 checks, 82 lines checked
CHECK: Unbalanced braces around else statement
#85: FILE: drivers/mmc/mmc.c:2089:
+	else {

total: 0 errors, 0 warnings, 1 checks, 116 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#35: 
new file mode 100644

total: 0 errors, 1 warnings, 0 checks, 403 lines checked
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#27: 
new file mode 100644

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180115/1958f295/attachment.sig>