[U-Boot] [PATCH v2 0/7] Add support of SD3.0 UHS modes for ZynqMP

[Siva Durga Prasad Paladugu]

This patch series is meant to add SD3.0 support for ZynqMP
platform.
The first five patches in the series mostly setting up
things in sdhci layer to support SD3.0 , the sixth patch
is to add SD3.0 support for ZynqMP platform and the last
patch is to enable this support for ZynqMP zcu102 rev1.0
eval board.

Repo: u-boot-mmc.git
Branch: hs200-working

Siva Durga Prasad Paladugu (7):
  mmc: sdhci: Add support for disabling clock
  mmc: sdhci: Handle execute tuning command in sdhci_send_command
  sdhci: Add new sdhci ops for platform specific tuning and delays
  mmc: sdhci: Invoke platform specific tuning and delay routines
  mmc : sdhci: Read capabilities register1 and update host caps
  mmc: zynq_sdhci: Add support for SD3.0
  zynqmp: zcu102: Enable UHS support for ZCU102 Rev1.0 board

 board/xilinx/zynqmp/Makefile                  |   2 +
 board/xilinx/zynqmp/tap_delays.c              | 230 ++++++++++++++++++++++++++
 configs/xilinx_zynqmp_zcu102_rev1_0_defconfig |   2 +
 drivers/mmc/sdhci.c                           |  67 +++++++-
 drivers/mmc/zynq_sdhci.c                      | 230 +++++++++++++++++++++++++-
 include/sdhci.h                               |   9 +
 include/zynqmp_tap_delay.h                    |  20 +++
 7 files changed, 550 insertions(+), 10 deletions(-)
 create mode 100644 board/xilinx/zynqmp/tap_delays.c
 create mode 100644 include/zynqmp_tap_delay.h

-- 
2.7.4