[U-Boot] How to debug u-boot on arm board if nothing printed via uart?

[Lukasz Majewski]

Hi,

> Hello all,
> As the topic, im a newbie for the u-boot debugging.
> Now, it can't booting on my TI boards, there were
> nothing printed via uart.

Were your boards working previously?

What has happen that they aren't printing anything anymore?

> I want to know, for this 
> condition, how to debug it?

The most popular approach is to use a JTAG dongle.

Do you have JTAG pins on your board? You may want to look at OpenOCD.

> Thanks.
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180128/f229d14b/attachment.sig>