[U-Boot] [PATCH V3 00/31] imx: add i.MX8M support and i.MX8MQ EVK
Peng Fan
van.freenix at gmail.com
Wed Jan 10 00:55:15 UTC 2018
Hi Diego,
On Tue, Jan 09, 2018 at 03:42:29PM -0200, Diego Dorta wrote:
>Hi peng,
>
>2018-01-09 10:11 GMT-02:00 Peng Fan <peng.fan at nxp.com>:
>> This patchset is to add i.MX8M and i.MX8MQ-EVK support
>>
>> V3:
>> This patchset based on https://patchwork.ozlabs.org/patch/855027/
>> "arm: imx: Rework i.MX specific commands to be excluded from SPL" from
>> Tom to avoid this patchset fail apply after Tom's patch merged.
>>
>> Previously "power: pmic/regulator allow dm be omited by SPL" broke other
>> boards, in V3 patchset, only touch pfuze100 related options.
>>
>> Sharing code about get mac from fuse between mx7/mx8m
>> Sharing code about bootaux between mx6/7/mx8m
>> Sharing code about cpu speed grade between mx7/mx8m
>> Sharing code about get boot device between mx7/mx8m
>> Sharding code about mmc env between mx7/mx8m
>>
>> Introduce wait_mask_set/clr_timeout to avoid deadloop in clock pll configuration
>>
>> Correct authorship of fix building warning on fec arm64, patch 27/31.
>>
>> Switch to use structure for DDR Controller. For DDR PHY registers,
>> there are about more than 10 thousands registers, I could not convert
>> them with detailed register name, and the script is generated from IC team,
>> So I use regs[0xxxxx] arrays here fo easily converting between IC team
>> released script and uboot ddr phy cod.
>>
>> Improve REAMME file to include where to download firmware and imx-mkimage
>> and how to build
>>
>> Add review tags on the V2 patchset.
>>
>> Hope this patchset could catch up next release :)
>>
>> V2:
>>
>> patch 02/23: convert to structure, drop is_boot_from_usb and
>> disconnect_from_usb
>> patch 04/23: conver to use structure for the clock driver, removed the
>> CCM_xxx macros. Add static for local functons.
>> Add init_usdhc_clk, init_uart_clk and etc to not enable
>> them all at default.
>> patch 05/23: Add more commit msg for the sip part.
>> patch 08/23: Merge the spl boot device with i.MX7
>> patch 12/23: Typo fix and return error fix from Heiko for the SoC related part
>> patch 22/23: Use a weak function ddr_init. If patch 23/23 could not be
>> accepted at current stage, to make others still be could be
>> compiled.
>>
>> The patchset depends on
>> https://patchwork.ozlabs.org/patch/841934/
>> https://patchwork.ozlabs.org/patch/841958/
>> to be tested on real hardware.
>>
>> V1:
>>
>> patch: "power: pmic.h: include dm/ofnode.h" and
>> "power: pmic/regulator allow dm be omited by SPL" is previously reviewed
>> in mailist to not merged. If no issue, you may pick it up.
>>
>> The board support is a large patch because of the ddr related code.
>> If it is not good, please first review/pick-up other patches if they
>> are ok.
>>
>> Peng Fan (30):
>> imx: add i.MX8M into Kconfig
>> imx: mx8m: add register definition header file
>> imx: mx8m: add pin header file
>> time: add wait_mask_set/clr_timeout helper functions
>> imx: mx8m: add clock driver
>> imx: add sip function
>> imx: boot_mode: add USB_BOOT entry
>> imx: cpu: update cpu file to support i.MX8M
>> imx: spl: implement spl_boot_device for i.MX8M
>> imx: add i.MX8MQ SoC Revision and is_mx8m helper
>> imx: add pad settings bit definition for i.MX8M
>> imx: cpu: move speed/temp to common cpu
>> imx: cpu: add cpu speed/grade for i.MX8M
>> imx: refactor imx_get_mac_from_fuse
>> imx: cleanup bootaux
>> imx: bootaux: support i.MX8M
>> imx: mx7: move get_boot_device to cpu.c
>> imx: cpu: support get_boot_device for i.MX8M
>> imx: mx7: move mmc env code to mmc_env.c
>> imx: mx8m: add soc related settings and files
>> imx: makefile: compile files for i.MX8M
>> misc: ocotp: add i.MX8M support
>> mmc: fsl_esdhc: support i.MX8M
>> imx: lcdif: include i.MX8M
>> gpio: mxc: add i.MX8M support
>> net: fec: do not access reserved register for i.MX8M
>> imx: imx8mq: add dtsi file
>> power: pmic/regulator allow dm be omitted by SPL
>> imx: mx8m: add ddr controller memory map
>> imx: add i.MX8MQ EVK support
>
>I've tried to apply your patches on v2018.01 and I got this error:
>
>u-boot$ git am imx-add-i.MX8M-support-and-i.MX8MQ-EVK.patch
>Applying: imx: add i.MX8M into Kconfig
>Applying: imx: mx8m: add register definition header file
>Applying: imx: mx8m: add pin header file
>Applying: time: add wait_mask_set/clr_timeout helper functions
>Applying: imx: mx8m: add clock driver
>Applying: imx: add sip function
>Applying: imx: boot_mode: add USB_BOOT entry
>Applying: imx: cpu: update cpu file to support i.MX8M
>Applying: imx: spl: implement spl_boot_device for i.MX8M
>Applying: imx: add i.MX8MQ SoC Revision and is_mx8m helper
>Applying: imx: add pad settings bit definition for i.MX8M
>Applying: imx: cpu: move speed/temp to common cpu
>Applying: imx: cpu: add cpu speed/grade for i.MX8M
>Applying: imx: refactor imx_get_mac_from_fuse
>error: patch failed: arch/arm/mach-imx/Makefile:25
>error: arch/arm/mach-imx/Makefile: patch does not apply
>Patch failed at 0014 imx: refactor imx_get_mac_from_fuse
>The copy of the patch that failed is found in: .git/rebase-apply/patch
>When you have resolved this problem, run "git am --continue".
>If you prefer to skip this patch, run "git am --skip" instead.
>To restore the original branch and stop patching, run "git am --abort".
>
>I also tried to apply manually and I got this:
>
>u-boot$ patch -p1 < imx-add-i.MX8M-support-and-i.MX8MQ-EVK.patch
>patching file arch/arm/Kconfig
>patching file arch/arm/Makefile
>patching file arch/arm/mach-imx/mx8m/Kconfig
>patching file arch/arm/include/asm/arch-mx8m/imx-regs.h
>patching file arch/arm/include/asm/arch-mx8m/mx8mq_pins.h
>patching file include/linux/delay.h
>patching file lib/time.c
>patching file arch/arm/include/asm/arch-mx8m/clock.h
>patching file arch/arm/mach-imx/mx8m/Makefile
>patching file arch/arm/mach-imx/mx8m/clock.c
>patching file arch/arm/mach-imx/mx8m/clock_slice.c
>patching file arch/arm/include/asm/mach-imx/sys_proto.h
>patching file arch/arm/mach-imx/Makefile
>Hunk #1 succeeded at 122 (offset -2 lines).
>patching file arch/arm/mach-imx/sip.c
>patching file include/imx_sip.h
>patching file arch/arm/include/asm/mach-imx/boot_mode.h
>patching file arch/arm/mach-imx/cpu.c
>patching file arch/arm/mach-imx/spl.c
>patching file arch/arm/include/asm/arch-imx/cpu.h
>patching file arch/arm/include/asm/mach-imx/sys_proto.h
>patching file arch/arm/include/asm/mach-imx/iomux-v3.h
>patching file arch/arm/mach-imx/cpu.c
>patching file arch/arm/mach-imx/mx7/soc.c
>patching file arch/arm/mach-imx/cpu.c
>patching file arch/arm/mach-imx/Makefile
>Hunk #1 FAILED at 25.
>1 out of 1 hunk FAILED -- saving rejects to file arch/arm/mach-imx/Makefile.rej
>patching file arch/arm/mach-imx/mac.c
>patching file arch/arm/mach-imx/mx6/soc.c
>patching file arch/arm/mach-imx/mx7/soc.c
>patching file arch/arm/include/asm/arch-mx6/imx-regs.h
>patching file arch/arm/include/asm/arch-mx7/imx-regs.h
>patching file arch/arm/mach-imx/imx_bootaux.c
>Hunk #1 FAILED at 5.
>1 out of 1 hunk FAILED -- saving rejects to file
>arch/arm/mach-imx/imx_bootaux.c.rej
>patching file arch/arm/mach-imx/mx6/soc.c
>patching file arch/arm/mach-imx/mx7/soc.c
>patching file arch/arm/mach-imx/imx_bootaux.c
>Hunk #1 FAILED at 6.
>Hunk #2 FAILED at 24.
>Hunk #3 FAILED at 40.
>3 out of 3 hunks FAILED -- saving rejects to file
>arch/arm/mach-imx/imx_bootaux.c.rej
>patching file arch/arm/include/asm/arch-mx7/imx-regs.h
>patching file arch/arm/include/asm/mach-imx/boot_mode.h
>patching file arch/arm/mach-imx/cpu.c
>patching file arch/arm/mach-imx/mx7/soc.c
>patching file arch/arm/mach-imx/cpu.c
>patching file arch/arm/mach-imx/Makefile
>patching file arch/arm/mach-imx/mmc_env.c
>patching file arch/arm/mach-imx/mx7/soc.c
>patching file arch/arm/include/asm/arch-mx8m/crm_regs.h
>patching file arch/arm/include/asm/arch-mx8m/gpio.h
>patching file arch/arm/include/asm/arch-mx8m/sys_proto.h
>patching file arch/arm/mach-imx/Makefile
>Hunk #1 succeeded at 129 (offset -3 lines).
>patching file arch/arm/mach-imx/mx8m/Makefile
>patching file arch/arm/mach-imx/mx8m/lowlevel_init.S
>patching file arch/arm/mach-imx/mx8m/soc.c
>patching file arch/arm/mach-imx/Makefile
>patching file drivers/misc/mxc_ocotp.c
>patching file drivers/mmc/fsl_esdhc.c
>patching file arch/arm/include/asm/mach-imx/regs-lcdif.h
>patching file drivers/gpio/mxc_gpio.c
>patching file drivers/net/fec_mxc.c
>patching file drivers/net/fec_mxc.c
>patching file arch/arm/dts/fsl-imx8-ca53.dtsi
>patching file arch/arm/dts/fsl-imx8mq.dtsi
>patching file include/dt-bindings/clock/imx8mq-clock.h
>patching file include/dt-bindings/pinctrl/pins-imx8mq.h
>patching file drivers/power/pmic/Makefile
>patching file drivers/power/regulator/Makefile
>patching file arch/arm/include/asm/arch-mx8m/ddr.h
>patching file arch/arm/dts/Makefile
>patching file arch/arm/dts/fsl-imx8mq-evk.dts
>patching file arch/arm/include/asm/arch-mx8m/ddr.h
>patching file arch/arm/mach-imx/mx8m/Kconfig
>patching file board/freescale/mx8mq_evk/Kconfig
>patching file board/freescale/mx8mq_evk/Makefile
>patching file board/freescale/mx8mq_evk/README
>patching file board/freescale/mx8mq_evk/ddr/ddr_init.c
>patching file board/freescale/mx8mq_evk/ddr/ddrphy_train.c
>patching file board/freescale/mx8mq_evk/ddr/helper.c
>patching file board/freescale/mx8mq_evk/mx8mq_evk.c
>patching file board/freescale/mx8mq_evk/spl.c
>patching file configs/mx8mq_evk_defconfig
>patching file include/configs/mx8mq_evk.h
>
>Is this right? How can I avoid this error?
As noted in cover-letter,
This patchset based on https://patchwork.ozlabs.org/patch/855027/
"arm: imx: Rework i.MX specific commands to be excluded from SPL" from
Tom to avoid this patchset fail apply after Tom's patch merged.
I use imx/master branch of Stefano's tree. Because of recent GPT_TIMER
entry in arch/arm/mach-imx/Makefile, applying Tom's patch needs a small
modification. After that, you could apply the whole patchset.
Thanks,
Peng.
>>
>
>Thanks,
>Diego
>_______________________________________________
>U-Boot mailing list
>U-Boot at lists.denx.de
>https://lists.denx.de/listinfo/u-boot
--
More information about the U-Boot
mailing list