[U-Boot] mmc1 not working on Samsung snow chromebook

[Guillaume Gardet]

Hi,


Le 17/11/2017 à 10:48, Jaehoon Chung a écrit :
> Hi,
>
> On 2017년 11월 16일 21:29, Guillaume Gardet wrote:
>> I found a workaround. If I disable MMC_MODE_HS_52MHz, then it is working fine.
>>
>> I guess there is a better way to implement the following patch ?
>>
>> **********************************************************************
>> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
>> index 23f642980b..a6a0934eef 100644
>> --- a/drivers/mmc/dw_mmc.c
>> +++ b/drivers/mmc/dw_mmc.c
>> @@ -508,7 +508,8 @@ void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
>>                  cfg->host_caps |= MMC_MODE_4BIT;
>>                  cfg->host_caps &= ~MMC_MODE_8BIT;
>>          }
>> -       cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
>> +       /* MMC_MODE_HS_52MHz is broken (at least) on Samsung Snow, so disbale it for now */
>> +       cfg->host_caps |= MMC_MODE_HS;
> It means that card is running the lower clock frequency..it's not solution.
> Timing issue and some problems should be fixed with lowest frequency.
>
> Now, i can't test and check more detail. After back to my office or home, i will check what main cause.

Any progress on this topic ?

Guillaume

>
> Best Regards,
> Jaehoon Chung
>
>>          cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
>>   }
>> **********************************************************************
>>
>>
>> Guillaume
>>
>>
>>
>> Le 15/11/2017 à 11:27, Guillaume Gardet a écrit :
>>>
>>> Le 15/11/2017 à 11:22, Guillaume Gardet a écrit :
>>>> Forgot to Cc ML. Done now.
>>>>
>>>>
>>>> Le 15/11/2017 à 11:14, Guillaume Gardet a écrit :
>>>>> Hello,
>>>>>
>>>>> I tested U-Boot v2017.09 on a Samsung Snow (Chromebook ARM) and while mmc0 (internal eMMC) is working fine, mmc1 (external SD slot) does not work.
>>>>> I get the following error for 'mmc dev 1' command:
>>>>>      mmc_init: -110, time 30
>>> Please also note that on boot (or on 1st 'mmc dev 1' cmd if I stop auto-boot), I firstly get:
>>>      mmc_init: -5, time 39
>>>
>>> Then, all next attempts retruns:
>>>      mmc_init: -110, time 30
>>>
>>>
>>> Guillaume
>>>
>>>
>>>>> Any idea what could be wrong?
>>>>>
>>>>> Guillaume
>>>>>
>>>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://lists.denx.de/listinfo/u-boot