[U-Boot] [PATCH v3 20/20] clk: rockchip: clk_rk3368: Implement "assign-clock-parent"

David Wu david.wu at rock-chips.com
Sat Jan 13 06:07:04 UTC 2018


Implement the setting parent for gmac clock, and add internal
pll div set for mac clk.

Signed-off-by: David Wu <david.wu at rock-chips.com>
---

Changes in v3:
- New patch

Changes in v2: None

 arch/arm/include/asm/arch-rockchip/cru_rk3368.h |  7 ++
 drivers/clk/rockchip/clk_rk3368.c               | 91 +++++++++++++++++++++++--
 2 files changed, 91 insertions(+), 7 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
index 5f6a5fb..6a6fe47 100644
--- a/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
+++ b/arch/arm/include/asm/arch-rockchip/cru_rk3368.h
@@ -95,6 +95,13 @@ enum {
 	CLK_SARADC_DIV_CON_WIDTH	= 8,
 
 	/* CLKSEL43_CON */
+	GMAC_DIV_CON_SHIFT		= 0x0,
+	GMAC_DIV_CON_MASK		= GENMASK(4, 0),
+	GMAC_PLL_SHIFT			= 6,
+	GMAC_PLL_MASK			= GENMASK(7, 6),
+	GMAC_PLL_SELECT_NEW		= (0x0 << GMAC_PLL_SHIFT),
+	GMAC_PLL_SELECT_CODEC		= (0x1 << GMAC_PLL_SHIFT),
+	GMAC_PLL_SELECT_GENERAL		= (0x2 << GMAC_PLL_SHIFT),
 	GMAC_MUX_SEL_EXTCLK             = BIT(8),
 
 	/* CLKSEL51_CON */
diff --git a/drivers/clk/rockchip/clk_rk3368.c b/drivers/clk/rockchip/clk_rk3368.c
index a831991..3364e6a 100644
--- a/drivers/clk/rockchip/clk_rk3368.c
+++ b/drivers/clk/rockchip/clk_rk3368.c
@@ -311,15 +311,43 @@ static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate)
 #endif
 
 #if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
-static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru,
-				 ulong clk_id, ulong set_rate)
+static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru, ulong set_rate)
 {
+	ulong ret;
+
 	/*
-	 * This models the 'assigned-clock-parents = <&ext_gmac>' from
-	 * the DTS and switches to the 'ext_gmac' clock parent.
+	 * The gmac clock can be derived either from an external clock
+	 * or can be generated from internally by a divider from SCLK_MAC.
 	 */
-	rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
-	return set_rate;
+	if (readl(&cru->clksel_con[43]) & GMAC_MUX_SEL_EXTCLK) {
+		/* An external clock will always generate the right rate... */
+		ret = set_rate;
+	} else {
+		u32 con = readl(&cru->clksel_con[43]);
+		ulong pll_rate;
+		u8 div;
+
+		if (((con >> GMAC_PLL_SHIFT) & GMAC_PLL_MASK) ==
+		    GMAC_PLL_SELECT_GENERAL)
+			pll_rate = GPLL_HZ;
+		else if (((con >> GMAC_PLL_SHIFT) & GMAC_PLL_MASK) ==
+			 GMAC_PLL_SELECT_CODEC)
+			pll_rate = CPLL_HZ;
+		else
+			/* CPLL is not set */
+			return -EPERM;
+
+		div = DIV_ROUND_UP(pll_rate, set_rate) - 1;
+		if (div <= 0x1f)
+			rk_clrsetreg(&cru->clksel_con[43], GMAC_DIV_CON_MASK,
+				     div << GMAC_DIV_CON_SHIFT);
+		else
+			debug("Unsupported div for gmac:%d\n", div);
+
+		return DIV_TO_RATE(pll_rate, div);
+	}
+
+	return ret;
 }
 #endif
 
@@ -479,7 +507,7 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
 #if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
 	case SCLK_MAC:
 		/* select the external clock */
-		ret = rk3368_gmac_set_clk(priv->cru, clk->id, rate);
+		ret = rk3368_gmac_set_clk(priv->cru, rate);
 		break;
 #endif
 	case SCLK_SARADC:
@@ -492,9 +520,58 @@ static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
 	return ret;
 }
 
+static int rk3368_gmac_set_parent(struct clk *clk, struct clk *parent)
+{
+	struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
+	struct rk3368_cru *cru = priv->cru;
+	const char *clock_output_name;
+	int ret;
+
+	/*
+	 * If the requested parent is in the same clock-controller and
+	 * the id is SCLK_MAC ("sclk_mac"), switch to the internal
+	 * clock.
+	 */
+	if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC)) {
+		debug("%s: switching GAMC to SCLK_MAC\n", __func__);
+		rk_clrreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
+		return 0;
+	}
+
+	/*
+	 * Otherwise, we need to check the clock-output-names of the
+	 * requested parent to see if the requested id is "ext_gmac".
+	 */
+	ret = dev_read_string_index(parent->dev, "clock-output-names",
+				    parent->id, &clock_output_name);
+	if (ret < 0)
+		return -ENODATA;
+
+	/* If this is "ext_gmac", switch to the external clock input */
+	if (!strcmp(clock_output_name, "ext_gmac")) {
+		debug("%s: switching GMAC to external clock\n", __func__);
+		rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int rk3368_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	switch (clk->id) {
+	case SCLK_MAC:
+		return rk3368_gmac_set_parent(clk, parent);
+	}
+
+	debug("%s: unsupported clk %ld\n", __func__, clk->id);
+	return -ENOENT;
+}
+
 static struct clk_ops rk3368_clk_ops = {
 	.get_rate = rk3368_clk_get_rate,
 	.set_rate = rk3368_clk_set_rate,
+	.set_parent = rk3368_clk_set_parent,
 };
 
 static int rk3368_clk_probe(struct udevice *dev)
-- 
2.7.4




More information about the U-Boot mailing list