[U-Boot] [PATCH] mx6sabresd: Add fastboot support

[Michael Nazzareno Trimarchi]

Hi

On Mon, Jan 29, 2018 at 4:23 PM, Shawn Guo <shawn.guo at linaro.org> wrote:
> On Mon, Jan 29, 2018 at 11:11:57AM -0200, Fabio Estevam wrote:
>> From: Fabio Estevam <fabio.estevam at nxp.com>
>>
>> fastboot tool is a convenient way to flash the eMMC, so
>> add support for it.
>>
>> Examples of usages:
>>
>> On the mx6sabresd:
>>
>> => fastboot 0
>>
>> On the Linux PC connected via USB:
>>
>> $ sudo fastboot getvar bootloader-version -i 0x0525
>> bootloader-version: U-Boot 2018.01-00550-g7517cfe
>> finished. total time: 0.000s
>>
>> $ sudo fastboot reboot -i 0x0525
>>
>> (this causes the mx6sabresd to reboot)
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
>
> Tested-by: Shawn Guo <shawn.guo at linaro.org>
>

are partition already defined? in sabre config. It's not used to know
the u-boot version ;)
Can you just update the commit message in how you perform the update?

Michael

_______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |