[U-Boot] [PATCH 02/05] arm: mach-snapdragon: refactor clock driver
Jorge Ramirez-Ortiz
jorge.ramirez-ortiz at linaro.org
Fri Jan 5 10:29:11 UTC 2018
In preparation to add support for the Dragonboard820c (APQ8096),
refactor the current Snapdragon clock driver.
No new functionality has been added.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
---
arch/arm/mach-snapdragon/Makefile | 6 +-
arch/arm/mach-snapdragon/clock-apq8016.c | 181 ++-------------------
arch/arm/mach-snapdragon/clock-snapdragon.c | 134 +++++++++++++++
arch/arm/mach-snapdragon/clock-snapdragon.h | 40 +++++
.../mach-snapdragon/include/mach/sysmap-apq8016.h | 29 +++-
5 files changed, 217 insertions(+), 173 deletions(-)
create mode 100644 arch/arm/mach-snapdragon/clock-snapdragon.c
create mode 100644 arch/arm/mach-snapdragon/clock-snapdragon.h
diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile
index d82a04d..74f90dc 100644
--- a/arch/arm/mach-snapdragon/Makefile
+++ b/arch/arm/mach-snapdragon/Makefile
@@ -4,5 +4,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y += clock-apq8016.o
-obj-y += sysmap-apq8016.o
+obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o
+obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o
+obj-y += clock-snapdragon.o
diff --git a/arch/arm/mach-snapdragon/clock-apq8016.c b/arch/arm/mach-snapdragon/clock-apq8016.c
index da05015..a242417 100644
--- a/arch/arm/mach-snapdragon/clock-apq8016.c
+++ b/arch/arm/mach-snapdragon/clock-apq8016.c
@@ -14,146 +14,12 @@
#include <errno.h>
#include <asm/io.h>
#include <linux/bitops.h>
+#include "clock-snapdragon.h"
/* GPLL0 clock control registers */
-#define GPLL0_STATUS 0x2101C
#define GPLL0_STATUS_ACTIVE BIT(17)
-
-#define APCS_GPLL_ENA_VOTE 0x45000
#define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
-/* vote reg for blsp1 clock */
-#define APCS_CLOCK_BRANCH_ENA_VOTE 0x45004
-#define APCS_CLOCK_BRANCH_ENA_VOTE_BLSP1 BIT(10)
-
-/* SDC(n) clock control registers; n=1,2 */
-
-/* block control register */
-#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
-/* cmd */
-#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
-/* cfg */
-#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008)
-/* m */
-#define SDCC_M(n) ((n * 0x1000) + 0x4100C)
-/* n */
-#define SDCC_N(n) ((n * 0x1000) + 0x41010)
-/* d */
-#define SDCC_D(n) ((n * 0x1000) + 0x41014)
-/* branch control */
-#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018)
-#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
-
-/* BLSP1 AHB clock (root clock for BLSP) */
-#define BLSP1_AHB_CBCR 0x1008
-
-/* Uart clock control registers */
-#define BLSP1_UART2_BCR 0x3028
-#define BLSP1_UART2_APPS_CBCR 0x302C
-#define BLSP1_UART2_APPS_CMD_RCGR 0x3034
-#define BLSP1_UART2_APPS_CFG_RCGR 0x3038
-#define BLSP1_UART2_APPS_M 0x303C
-#define BLSP1_UART2_APPS_N 0x3040
-#define BLSP1_UART2_APPS_D 0x3044
-
-/* CBCR register fields */
-#define CBCR_BRANCH_ENABLE_BIT BIT(0)
-#define CBCR_BRANCH_OFF_BIT BIT(31)
-
-struct msm_clk_priv {
- phys_addr_t base;
-};
-
-/* Enable clock controlled by CBC soft macro */
-static void clk_enable_cbc(phys_addr_t cbcr)
-{
- setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
-
- while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
- ;
-}
-
-/* clock has 800MHz */
-static void clk_enable_gpll0(phys_addr_t base)
-{
- if (readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE)
- return; /* clock already enabled */
-
- setbits_le32(base + APCS_GPLL_ENA_VOTE, APCS_GPLL_ENA_VOTE_GPLL0);
-
- while ((readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) == 0)
- ;
-}
-
-#define APPS_CMD_RGCR_UPDATE BIT(0)
-
-/* Update clock command via CMD_RGCR */
-static void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
-{
- setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
-
- /* Wait for frequency to be updated. */
- while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
- ;
-}
-
-struct bcr_regs {
- uintptr_t cfg_rcgr;
- uintptr_t cmd_rcgr;
- uintptr_t M;
- uintptr_t N;
- uintptr_t D;
-};
-
-/* RCGR_CFG register fields */
-#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
-
-/* sources */
-#define CFG_CLK_SRC_CXO (0 << 8)
-#define CFG_CLK_SRC_GPLL0 (1 << 8)
-#define CFG_CLK_SRC_MASK (7 << 8)
-
-/* Mask for supported fields */
-#define CFG_MASK 0x3FFF
-
-#define CFG_DIVIDER_MASK 0x1F
-
-/* root set rate for clocks with half integer and MND divider */
-static void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
- int div, int m, int n, int source)
-{
- uint32_t cfg;
- /* M value for MND divider. */
- uint32_t m_val = m;
- /* NOT(N-M) value for MND divider. */
- uint32_t n_val = ~((n)-(m)) * !!(n);
- /* NOT 2D value for MND divider. */
- uint32_t d_val = ~(n);
-
- /* Program MND values */
- writel(m_val, base + regs->M);
- writel(n_val, base + regs->N);
- writel(d_val, base + regs->D);
-
- /* setup src select and divider */
- cfg = readl(base + regs->cfg_rcgr);
- cfg &= ~CFG_MASK;
- cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
-
- /* Set the divider; HW permits fraction dividers (+0.5), but
- for simplicity, we will support integers only */
- if (div)
- cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
-
- if (n_val)
- cfg |= CFG_MODE_DUAL_EDGE;
-
- writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
-
- /* Inform h/w to start using the new config. */
- clk_bcr_update(base + regs->cmd_rcgr);
-}
-
static const struct bcr_regs sdc_regs[] = {
{
.cfg_rcgr = SDCC_CFG_RCGR(1),
@@ -171,7 +37,14 @@ static const struct bcr_regs sdc_regs[] = {
}
};
-/* Init clock for SDHCI controller */
+static struct gpll0_ctrl gpll0_ctrl = {
+ .status = GPLL0_STATUS,
+ .status_bit = GPLL0_STATUS_ACTIVE,
+ .ena_vote = APCS_GPLL_ENA_VOTE,
+ .vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+};
+
+/* SDHCI */
static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
{
int div = 8; /* 100MHz default */
@@ -183,7 +56,7 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
/* 800Mhz/div, gpll0 */
clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
CFG_CLK_SRC_GPLL0);
- clk_enable_gpll0(priv->base);
+ clk_enable_gpll0(priv->base, &gpll0_ctrl);
clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
return rate;
@@ -197,7 +70,7 @@ static const struct bcr_regs uart2_regs = {
.D = BLSP1_UART2_APPS_D,
};
-/* Init UART clock, 115200 */
+/* UART: 115200 */
static int clk_init_uart(struct msm_clk_priv *priv)
{
/* Enable iface clk */
@@ -205,7 +78,7 @@ static int clk_init_uart(struct msm_clk_priv *priv)
/* 7372800 uart block clock @ GPLL0 */
clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
CFG_CLK_SRC_GPLL0);
- clk_enable_gpll0(priv->base);
+ clk_enable_gpll0(priv->base, &gpll0_ctrl);
/* Enable core clk */
clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
@@ -230,33 +103,3 @@ ulong msm_set_rate(struct clk *clk, ulong rate)
return 0;
}
}
-
-static int msm_clk_probe(struct udevice *dev)
-{
- struct msm_clk_priv *priv = dev_get_priv(dev);
-
- priv->base = devfdt_get_addr(dev);
- if (priv->base == FDT_ADDR_T_NONE)
- return -EINVAL;
-
- return 0;
-}
-
-static struct clk_ops msm_clk_ops = {
- .set_rate = msm_set_rate,
-};
-
-static const struct udevice_id msm_clk_ids[] = {
- { .compatible = "qcom,gcc-msm8916" },
- { .compatible = "qcom,gcc-apq8016" },
- { }
-};
-
-U_BOOT_DRIVER(clk_msm) = {
- .name = "clk_msm",
- .id = UCLASS_CLK,
- .of_match = msm_clk_ids,
- .ops = &msm_clk_ops,
- .priv_auto_alloc_size = sizeof(struct msm_clk_priv),
- .probe = msm_clk_probe,
-};
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c
new file mode 100644
index 0000000..da44544
--- /dev/null
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.c
@@ -0,0 +1,134 @@
+/*
+ * Clock drivers for Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski at gmail.com>
+ *
+ * Based on Little Kernel driver, simplified
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+/* CBCR register fields */
+#define CBCR_BRANCH_ENABLE_BIT BIT(0)
+#define CBCR_BRANCH_OFF_BIT BIT(31)
+
+extern ulong msm_set_rate(struct clk *clk, ulong rate);
+
+/* Enable clock controlled by CBC soft macro */
+void clk_enable_cbc(phys_addr_t cbcr)
+{
+ setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
+
+ while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
+ ;
+}
+
+void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0)
+{
+ if (readl(base + gpll0->status) & gpll0->status_bit)
+ return; /* clock already enabled */
+
+ setbits_le32(base + gpll0->ena_vote, gpll0->vote_bit);
+
+ while ((readl(base + gpll0->status) & gpll0->status_bit) == 0)
+ ;
+}
+
+#define APPS_CMD_RGCR_UPDATE BIT(0)
+
+/* Update clock command via CMD_RGCR */
+void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
+{
+ setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
+
+ /* Wait for frequency to be updated. */
+ while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
+ ;
+}
+
+#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
+
+#define CFG_MASK 0x3FFF
+
+#define CFG_DIVIDER_MASK 0x1F
+
+/* root set rate for clocks with half integer and MND divider */
+void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+ int div, int m, int n, int source)
+{
+ uint32_t cfg;
+ /* M value for MND divider. */
+ uint32_t m_val = m;
+ /* NOT(N-M) value for MND divider. */
+ uint32_t n_val = ~((n)-(m)) * !!(n);
+ /* NOT 2D value for MND divider. */
+ uint32_t d_val = ~(n);
+
+ /* Program MND values */
+ writel(m_val, base + regs->M);
+ writel(n_val, base + regs->N);
+ writel(d_val, base + regs->D);
+
+ /* setup src select and divider */
+ cfg = readl(base + regs->cfg_rcgr);
+ cfg &= ~CFG_MASK;
+ cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
+
+ /* Set the divider; HW permits fraction dividers (+0.5), but
+ for simplicity, we will support integers only */
+ if (div)
+ cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
+
+ if (n_val)
+ cfg |= CFG_MODE_DUAL_EDGE;
+
+ writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
+
+ /* Inform h/w to start using the new config. */
+ clk_bcr_update(base + regs->cmd_rcgr);
+}
+
+static int msm_clk_probe(struct udevice *dev)
+{
+ struct msm_clk_priv *priv = dev_get_priv(dev);
+
+ priv->base = devfdt_get_addr(dev);
+ if (priv->base == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ return 0;
+}
+
+static ulong msm_clk_set_rate(struct clk *clk, ulong rate)
+{
+ return msm_set_rate(clk, rate);
+}
+
+static struct clk_ops msm_clk_ops = {
+ .set_rate = msm_clk_set_rate,
+};
+
+static const struct udevice_id msm_clk_ids[] = {
+ { .compatible = "qcom,gcc-msm8916" },
+ { .compatible = "qcom,gcc-apq8016" },
+ { .compatible = "qcom,gcc-msm8996" },
+ { .compatible = "qcom,gcc-apq8096" },
+ { }
+};
+
+U_BOOT_DRIVER(clk_msm) = {
+ .name = "clk_msm",
+ .id = UCLASS_CLK,
+ .of_match = msm_clk_ids,
+ .ops = &msm_clk_ops,
+ .priv_auto_alloc_size = sizeof(struct msm_clk_priv),
+ .probe = msm_clk_probe,
+};
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.h b/arch/arm/mach-snapdragon/clock-snapdragon.h
new file mode 100644
index 0000000..c087eb9
--- /dev/null
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.h
@@ -0,0 +1,40 @@
+/*
+ * Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz at linaro.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _CLOCK_SNAPDRAGON_H
+#define _CLOCK_SNAPDRAGON_H
+
+#define CFG_CLK_SRC_CXO (0 << 8)
+#define CFG_CLK_SRC_GPLL0 (1 << 8)
+#define CFG_CLK_SRC_MASK (7 << 8)
+
+struct gpll0_ctrl {
+ uintptr_t status;
+ int status_bit;
+ uintptr_t ena_vote;
+ int vote_bit;
+};
+
+struct bcr_regs {
+ uintptr_t cfg_rcgr;
+ uintptr_t cmd_rcgr;
+ uintptr_t M;
+ uintptr_t N;
+ uintptr_t D;
+};
+
+struct msm_clk_priv {
+ phys_addr_t base;
+};
+
+void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *pll0);
+void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
+void clk_enable_cbc(phys_addr_t cbcr);
+void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+ int div, int m, int n, int source);
+
+#endif
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
index cdbfad0..1094b14 100644
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
+++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
@@ -8,7 +8,32 @@
#ifndef _MACH_SYSMAP_APQ8016_H
#define _MACH_SYSMAP_APQ8016_H
-#define GICD_BASE 0x0b000000
-#define GICC_BASE 0x0a20c000
+#define GICD_BASE (0x0b000000)
+#define GICC_BASE (0x0a20c000)
+
+/* Clocks: (from CLK_CTL_BASE) */
+#define GPLL0_STATUS (0x2101C)
+#define APCS_GPLL_ENA_VOTE (0x45000)
+
+#define SDCC_BCR(n) ((n * 0x1000) + 0x41000)
+#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004)
+#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008)
+#define SDCC_M(n) ((n * 0x1000) + 0x4100C)
+#define SDCC_N(n) ((n * 0x1000) + 0x41010)
+#define SDCC_D(n) ((n * 0x1000) + 0x41014)
+#define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018)
+#define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C)
+
+/* BLSP1 AHB clock (root clock for BLSP) */
+#define BLSP1_AHB_CBCR 0x1008
+
+/* Uart clock control registers */
+#define BLSP1_UART2_BCR (0x3028)
+#define BLSP1_UART2_APPS_CBCR (0x302C)
+#define BLSP1_UART2_APPS_CMD_RCGR (0x3034)
+#define BLSP1_UART2_APPS_CFG_RCGR (0x3038)
+#define BLSP1_UART2_APPS_M (0x303C)
+#define BLSP1_UART2_APPS_N (0x3040)
+#define BLSP1_UART2_APPS_D (0x3044)
#endif
--
2.7.4
More information about the U-Boot
mailing list