[U-Boot] [PATCH] freescale; Ensure common commands are not included in SPL binary

[Tom Rini]

Both the "qixis_reset" and esbc_validate" commands can only be used in
full U-Boot so do not build them in SPL.  As part of this rework the
qixis code to declare things as static and make use of __weak for
function aliases.

Cc; York Sun <york.sun at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 board/freescale/common/cmd_esbc_validate.c |  2 ++
 board/freescale/common/qixis.c             | 14 +++++++-------
 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/board/freescale/common/cmd_esbc_validate.c b/board/freescale/common/cmd_esbc_validate.c
index b3e5f019b87b..f45e2249fbac 100644
--- a/board/freescale/common/cmd_esbc_validate.c
+++ b/board/freescale/common/cmd_esbc_validate.c
@@ -23,6 +23,7 @@ loop:
 	return 0;
 }
 
+#ifndef CONFIG_SPL_BUILD
 static int do_esbc_validate(cmd_tbl_t *cmdtp, int flag, int argc,
 				char * const argv[])
 {
@@ -82,3 +83,4 @@ U_BOOT_CMD(
 	"Put the core in spin loop (Secure Boot Only)",
 	""
 );
+#endif
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index 0db0ed667002..24459f863578 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -10,6 +10,7 @@
 #include <common.h>
 #include <command.h>
 #include <asm/io.h>
+#include <linux/compiler.h>
 #include <linux/time.h>
 #include <i2c.h>
 #include "qixis.h"
@@ -136,12 +137,13 @@ void board_deassert_mem_reset(void)
 }
 #endif
 
-void qixis_reset(void)
+#ifndef CONFIG_SPL_BUILD
+static void qixis_reset(void)
 {
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
 }
 
-void qixis_bank_reset(void)
+static void qixis_bank_reset(void)
 {
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
 	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
@@ -196,15 +198,12 @@ static void qixis_dump_regs(void)
 	printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
 }
 
-static void __qixis_dump_switch(void)
+void __weak qixis_dump_switch(void)
 {
 	puts("Reverse engineering switch is not implemented for this board\n");
 }
 
-void qixis_dump_switch(void)
-	__attribute__((weak, alias("__qixis_dump_switch")));
-
-int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i;
 
@@ -305,3 +304,4 @@ U_BOOT_CMD(
 	"qixis_reset dump - display the QIXIS registers\n"
 	"qixis_reset switch - display switch\n"
 	);
+#endif
-- 
2.7.4