[U-Boot] [PATCH] ARM: sunxi: Remove left-over cd-inverted property from pcDuino3

[Maxime Ripard]

On Sat, Dec 23, 2017 at 12:30:56AM +0200, Tuomas Tynkkynen wrote:
> Commit 8620f384098b ("dm: sunxi: Linksprite_pcDuino3: Correct polarity
> of MMC card detect") claims that the Pcduino3 device tree had an
> incorrect polarity for the card detect pin and thus changed the polarity
> flag of the cd-gpios from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW.
> 
> Actually the DT was correct since according to the mmc binding, a
> combination of GPIO_ACTIVE_HIGH + cd-inverted results in an active-low
> polarity. But because the U-Boot driver lacks the code to look at the
> cd-inverted property (unlike the Linux driver) it interpreted the
> polarity of active-high. Thus, after that commit the DT is actually
> wrong from the binding/Linux point of view.
> 
> To make both Linux and U-Boot interpret the DT in the same way, just
> drop the left-over cd-inverted property. I've sent a Linux patch to
> switch all sunxi DTs over to not using the cd-inverted property, so
> eventually all sunxi boards in U-Boot will be consistent in not using
> cd-inverted.
> 
> Signed-off-by: Tuomas Tynkkynen <tuomas at tuxera.com>

Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180104/0f777c8c/attachment.sig>