[U-Boot] [PATCH 2/3] MIPS: add support for Broadcom MIPS BCM6368 SoC family
Álvaro Fernández Rojas
noltari at gmail.com
Sat Jan 20 10:53:58 UTC 2018
Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
---
arch/mips/dts/brcm,bcm6368.dtsi | 168 ++++++++++++++++++++++++++++++
arch/mips/mach-bmips/Kconfig | 24 +++++
include/configs/bmips_bcm6368.h | 30 ++++++
include/dt-bindings/clock/bcm6368-clock.h | 31 ++++++
include/dt-bindings/reset/bcm6368-reset.h | 22 ++++
5 files changed, 275 insertions(+)
create mode 100644 arch/mips/dts/brcm,bcm6368.dtsi
create mode 100644 include/configs/bmips_bcm6368.h
create mode 100644 include/dt-bindings/clock/bcm6368-clock.h
create mode 100644 include/dt-bindings/reset/bcm6368-reset.h
diff --git a/arch/mips/dts/brcm,bcm6368.dtsi b/arch/mips/dts/brcm,bcm6368.dtsi
new file mode 100644
index 0000000000..1bb538a1f3
--- /dev/null
+++ b/arch/mips/dts/brcm,bcm6368.dtsi
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/clock/bcm6368-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/bcm6368-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,bcm6368";
+
+ aliases {
+ spi0 = &spi;
+ };
+
+ cpus {
+ reg = <0x10000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ u-boot,dm-pre-reloc;
+
+ cpu at 0 {
+ compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <0>;
+ u-boot,dm-pre-reloc;
+ };
+
+ cpu at 1 {
+ compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
+ device_type = "cpu";
+ reg = <1>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ periph_osc: periph-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ u-boot,dm-pre-reloc;
+ };
+
+ periph_clk: periph-clk {
+ compatible = "brcm,bcm6345-clk";
+ reg = <0x10000004 0x4>;
+ #clock-cells = <1>;
+ };
+ };
+
+ pflash: nor at 18000000 {
+ compatible = "cfi-flash";
+ reg = <0x18000000 0x2000000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ status = "disabled";
+ };
+
+ ubus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ u-boot,dm-pre-reloc;
+
+ pll_cntl: syscon at 10000008 {
+ compatible = "syscon";
+ reg = <0x10000008 0x4>;
+ };
+
+ syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&pll_cntl>;
+ offset = <0x0>;
+ mask = <0x1>;
+ };
+
+ periph_rst: reset-controller at 10000010 {
+ compatible = "brcm,bcm6345-reset";
+ reg = <0x10000010 0x4>;
+ #reset-cells = <1>;
+ };
+
+ wdt: watchdog at 1000005c {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x1000005c 0xc>;
+ clocks = <&periph_osc>;
+ };
+
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdt>;
+ };
+
+ gpio1: gpio-controller at 10000080 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000080 0x4>, <0x10000088 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <6>;
+
+ status = "disabled";
+ };
+
+ gpio0: gpio-controller at 10000084 {
+ compatible = "brcm,bcm6345-gpio";
+ reg = <0x10000084 0x4>, <0x1000008c 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ status = "disabled";
+ };
+
+ leds: led-controller at 100000d0 {
+ compatible = "brcm,bcm6358-leds";
+ reg = <0x100000d0 0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ uart0: serial at 10000100 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000100 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ uart1: serial at 10000120 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x10000120 0x18>;
+ clocks = <&periph_osc>;
+
+ status = "disabled";
+ };
+
+ spi: spi at 10000800 {
+ compatible = "brcm,bcm6358-spi";
+ reg = <0x10000800 0x70c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&periph_clk BCM6368_CLK_SPI>;
+ resets = <&periph_rst BCM6368_RST_SPI>;
+ spi-max-frequency = <20000000>;
+ num-cs = <6>;
+
+ status = "disabled";
+ };
+
+ memory-controller at 10001200 {
+ compatible = "brcm,bcm6358-mc";
+ reg = <0x10001200 0x4c>;
+ u-boot,dm-pre-reloc;
+ };
+ };
+};
diff --git a/arch/mips/mach-bmips/Kconfig b/arch/mips/mach-bmips/Kconfig
index db8b40523a..936b67f5f2 100644
--- a/arch/mips/mach-bmips/Kconfig
+++ b/arch/mips/mach-bmips/Kconfig
@@ -10,6 +10,7 @@ config SYS_SOC
default "bcm6338" if SOC_BMIPS_BCM6338
default "bcm6348" if SOC_BMIPS_BCM6348
default "bcm6358" if SOC_BMIPS_BCM6358
+ default "bcm6368" if SOC_BMIPS_BCM6368
default "bcm63268" if SOC_BMIPS_BCM63268
choice
@@ -70,6 +71,17 @@ config SOC_BMIPS_BCM6358
help
This supports BMIPS BCM6358 family including BCM6358 and BCM6359.
+config SOC_BMIPS_BCM6368
+ bool "BMIPS BCM6368 family"
+ select SUPPORTS_BIG_ENDIAN
+ select SUPPORTS_CPU_MIPS32_R1
+ select MIPS_TUNE_4KC
+ select MIPS_L1_CACHE_SHIFT_4
+ select SWAP_IO_SPACE
+ select SYSRESET_SYSCON
+ help
+ This supports BMIPS BCM6368 family including BCM6368 and BCM6369.
+
config SOC_BMIPS_BCM63268
bool "BMIPS BCM63268 family"
select SUPPORTS_BIG_ENDIAN
@@ -120,6 +132,17 @@ config BOARD_COMTREND_VR3032U
ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs,
and a BCM6362 (integrated).
+config BOARD_COMTREND_WAP5813N
+ bool "Comtrend WAP-5813n board"
+ depends on SOC_BMIPS_BCM6368
+ select BMIPS_SUPPORTS_BOOT_RAM
+ help
+ Comtrend WAP-5813n boards have a BCM6369 SoC with 64 MB of RAM and
+ 8 MB of flash (CFI).
+ Between its different peripherals there's a BCM53115 switch with 5
+ ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs,
+ and a BCM4322 (miniPCI).
+
config BOARD_HUAWEI_HG556A
bool "Huawei EchoLife HG556a"
depends on SOC_BMIPS_BCM6358
@@ -185,6 +208,7 @@ config BMIPS_SUPPORTS_BOOT_RAM
source "board/comtrend/ar5387un/Kconfig"
source "board/comtrend/ct5361/Kconfig"
source "board/comtrend/vr3032u/Kconfig"
+source "board/comtrend/wap5813n/Kconfig"
source "board/huawei/hg556a/Kconfig"
source "board/netgear/cg3100d/Kconfig"
source "board/sagem/f at st1704/Kconfig"
diff --git a/include/configs/bmips_bcm6368.h b/include/configs/bmips_bcm6368.h
new file mode 100644
index 0000000000..ce35fae6a0
--- /dev/null
+++ b/include/configs/bmips_bcm6368.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_BMIPS_BCM6368_H
+#define __CONFIG_BMIPS_BCM6368_H
+
+/* CPU */
+#define CONFIG_SYS_MIPS_TIMER_FREQ 200000000
+
+/* RAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+
+/* U-Boot */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
+
+#if defined(CONFIG_BMIPS_BOOT_RAM)
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_INIT_SP_OFFSET 0x2000
+#endif
+
+#define CONFIG_SYS_FLASH_BASE 0xb8000000
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
+
+#endif /* __CONFIG_BMIPS_BCM6368_H */
diff --git a/include/dt-bindings/clock/bcm6368-clock.h b/include/dt-bindings/clock/bcm6368-clock.h
new file mode 100644
index 0000000000..9d41c0f131
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6368-clock.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * Derived from linux/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6368_H
+#define __DT_BINDINGS_CLOCK_BCM6368_H
+
+#define BCM6368_CLK_VDSL_QPROC 2
+#define BCM6368_CLK_VDSL_AFE 3
+#define BCM6368_CLK_VDSL_BONDING 4
+#define BCM6368_CLK_VDSL 5
+#define BCM6368_CLK_PHYMIPS 6
+#define BCM6368_CLK_SWPKT_USB 7
+#define BCM6368_CLK_SWPKT_SAR 8
+#define BCM6368_CLK_SPI 9
+#define BCM6368_CLK_USBD 10
+#define BCM6368_CLK_SAR 11
+#define BCM6368_CLK_ROBOSW 12
+#define BCM6368_CLK_UTOPIA 13
+#define BCM6368_CLK_PCM 14
+#define BCM6368_CLK_USBH 15
+#define BCM6368_CLK_GLESS 16
+#define BCM6368_CLK_NAND 17
+#define BCM6368_CLK_IPSEC 18
+#define BCM6368_CLK_USBH_IDDQ 19
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6368_H */
diff --git a/include/dt-bindings/reset/bcm6368-reset.h b/include/dt-bindings/reset/bcm6368-reset.h
new file mode 100644
index 0000000000..afa6a81d4c
--- /dev/null
+++ b/include/dt-bindings/reset/bcm6368-reset.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2017 Álvaro Fernández Rojas <noltari at gmail.com>
+ *
+ * Derived from linux/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DT_BINDINGS_RESET_BCM6368_H
+#define __DT_BINDINGS_RESET_BCM6368_H
+
+#define BCM6368_RST_SPI 0
+#define BCM6368_RST_MPI 3
+#define BCM6368_RST_IPSEC 4
+#define BCM6368_RST_EPHY 6
+#define BCM6368_RST_SAR 7
+#define BCM6368_RST_SWITCH 10
+#define BCM6368_RST_USBD 11
+#define BCM6368_RST_USBH 12
+#define BCM6368_RST_PCM 13
+
+#endif /* __DT_BINDINGS_RESET_BCM6368_H */
--
2.11.0
More information about the U-Boot
mailing list