[U-Boot] [PATCH 1/2] sunxi: fix i2c support for sunxi H3/H5
Nuno Gonçalves
nunojpg at gmail.com
Fri Jan 19 18:38:52 UTC 2018
Sorry, there is only 1 patch in this series.
I would like comments regarding removing DM_I2C for MACH_SUNXI_H3_H5,
as I didn't found a reason for it to be defined.
Thanks,
Nuno
On Fri, Jan 19, 2018 at 7:35 PM, Nuno Goncalves <nunojpg at gmail.com> wrote:
> Tested to work in a Orange Pi Zero (H2+/H3), and checked against H5 datasheet.
>
> Signed-off-by: Nuno Goncalves <nunojpg at gmail.com>
> ---
> arch/arm/include/asm/arch-sunxi/gpio.h | 2 ++
> arch/arm/mach-sunxi/Kconfig | 1 -
> board/sunxi/board.c | 10 +++++++++-
> 3 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
> index 24f85206c8..52884886d7 100644
> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> @@ -149,6 +149,8 @@ enum sunxi_gpio_number {
> #define SUN6I_GPA_SDC2 5
> #define SUN6I_GPA_SDC3 4
> #define SUN8I_H3_GPA_UART0 2
> +#define SUN8I_H3_H5_GPA_TWI0 2
> +#define SUN8I_H3_H5_GPA_TWI1 3
>
> #define SUN4I_GPB_PWM 2
> #define SUN4I_GPB_TWI0 2
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 1fededd0a3..a2a8599165 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -56,7 +56,6 @@ endif
>
> config MACH_SUNXI_H3_H5
> bool
> - select DM_I2C
> select SUNXI_DE2
> select SUNXI_DRAM_DW
> select SUNXI_DRAM_DW_32BIT
> diff --git a/board/sunxi/board.c b/board/sunxi/board.c
> index dcacdf3e62..6b55aef202 100644
> --- a/board/sunxi/board.c
> +++ b/board/sunxi/board.c
> @@ -93,6 +93,10 @@ void i2c_init_board(void)
> sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0);
> sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0);
> clock_twi_onoff(0, 1);
> +#elif defined(CONFIG_MACH_SUNXI_H3_H5)
> + sunxi_gpio_set_cfgpin(SUNXI_GPA(11), SUN8I_H3_H5_GPA_TWI0);
> + sunxi_gpio_set_cfgpin(SUNXI_GPA(12), SUN8I_H3_H5_GPA_TWI0);
> + clock_twi_onoff(0, 1);
> #elif defined(CONFIG_MACH_SUN8I)
> sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0);
> sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0);
> @@ -115,6 +119,10 @@ void i2c_init_board(void)
> sunxi_gpio_set_cfgpin(SUNXI_GPH(16), SUN6I_GPH_TWI1);
> sunxi_gpio_set_cfgpin(SUNXI_GPH(17), SUN6I_GPH_TWI1);
> clock_twi_onoff(1, 1);
> +#elif defined(CONFIG_MACH_SUNXI_H3_H5)
> + sunxi_gpio_set_cfgpin(SUNXI_GPA(18), SUN8I_H3_H5_GPA_TWI1);
> + sunxi_gpio_set_cfgpin(SUNXI_GPA(19), SUN8I_H3_H5_GPA_TWI1);
> + clock_twi_onoff(1, 1);
> #elif defined(CONFIG_MACH_SUN8I)
> sunxi_gpio_set_cfgpin(SUNXI_GPH(4), SUN8I_GPH_TWI1);
> sunxi_gpio_set_cfgpin(SUNXI_GPH(5), SUN8I_GPH_TWI1);
> @@ -137,7 +145,7 @@ void i2c_init_board(void)
> sunxi_gpio_set_cfgpin(SUNXI_GPH(18), SUN6I_GPH_TWI2);
> sunxi_gpio_set_cfgpin(SUNXI_GPH(19), SUN6I_GPH_TWI2);
> clock_twi_onoff(2, 1);
> -#elif defined(CONFIG_MACH_SUN8I)
> +#elif defined(CONFIG_MACH_SUN8I) /* same for CONFIG_MACH_SUNXI_H3_H5 */
> sunxi_gpio_set_cfgpin(SUNXI_GPE(12), SUN8I_GPE_TWI2);
> sunxi_gpio_set_cfgpin(SUNXI_GPE(13), SUN8I_GPE_TWI2);
> clock_twi_onoff(2, 1);
> --
> 2.11.0
>
More information about the U-Boot
mailing list