[U-Boot] [PATCH 1/2] imx7: spl: Use SPL boot device MMC1 for all of the SOCs MMC/SD boot devices

[Eran Matityahu]

Hi Uri.

> Hello Eran,
>
> On 01/03/2018 12:53 PM, Eran Matityahu wrote:
>>
>> Use only one SPL MMC device, similarly to the iMX6 code
>
>
> What is the reason for not using MMC2?

The reason is so that you won't have to initialize more than one MMC
device in SPL.
Also, to be consistent with the iMX6 SPL code.

>
>>
>> Signed-off-by: Eran Matityahu <eran.m at variscite.com>
>> ---
>>   arch/arm/mach-imx/spl.c | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-imx/spl.c b/arch/arm/mach-imx/spl.c
>> index d0d1b73aa6..6b5bd8990c 100644
>> --- a/arch/arm/mach-imx/spl.c
>> +++ b/arch/arm/mach-imx/spl.c
>> @@ -106,10 +106,9 @@ u32 spl_boot_device(void)
>>         switch (boot_device_spl) {
>>         case SD1_BOOT:
>>         case MMC1_BOOT:
>> -               return BOOT_DEVICE_MMC1;
>>         case SD2_BOOT:
>>         case MMC2_BOOT:
>> -               return BOOT_DEVICE_MMC2;
>> +               return BOOT_DEVICE_MMC1;
>>         case SPI_NOR_BOOT:
>>                 return BOOT_DEVICE_SPI;
>>         default:
>>
>
> --
> Regards,
> Uri

Regards,
Eran