[U-Boot] [PATCH 1/2] distro bootcmd: Allow board defined UBI partition and volume names

[Derald D. Woods]

This commit allows overriding the default assumption that the boot UBI
MTD partition is named 'UBI' and the UBI volume is 'boot'. A board
desiring to use a legacy or alternative NAND layout can now define the
following two extra environment variables:

	bootubipart=<some_ubi_partition_name>
	bootubivol=<some_ubi_volume_name>

EXAMPLE:

[include/configs/some_board.h]
---8<-------------------------------------------------------------------
[...]
	#include <config_distro_defaults.h>

	#define MEM_LAYOUT_ENV_SETTINGS \
		DEFAULT_LINUX_BOOT_ENV

	#define BOOT_TARGET_DEVICES(func) \
		func(UBIFS, ubifs, 0)

	#include <config_distro_bootcmd.h>
[...]
	#define CONFIG_EXTRA_ENV_SETTINGS \
		MEM_LAYOUT_ENV_SETTINGS \
		"bootubivol=rootfs\0" \
		"bootubipart=rootfs\0" \
		BOOTENV
[...]
---8<-------------------------------------------------------------------

Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
---
 include/config_distro_bootcmd.h | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 5c469a23fa..f567cebd38 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -71,10 +71,15 @@
 #ifdef CONFIG_CMD_UBIFS
 #define BOOTENV_SHARED_UBIFS \
 	"ubifs_boot=" \
-		"if ubi part UBI && ubifsmount ubi${devnum}:boot; then "  \
-			"setenv devtype ubi; "                            \
-			"setenv bootpart 0; "                             \
-			"run scan_dev_for_boot; "                         \
+		"env exists bootubipart || " \
+			"env set bootubipart UBI; " \
+		"env exists bootubivol || " \
+			"env set bootubivol boot; " \
+		"if ubi part ${bootubipart} && " \
+			"ubifsmount ubi${devnum}:${bootubivol}; " \
+		"then " \
+			"setenv devtype ubi; " \
+			"run scan_dev_for_boot; " \
 		"fi\0"
 #define BOOTENV_DEV_UBIFS	BOOTENV_DEV_BLKDEV
 #define BOOTENV_DEV_NAME_UBIFS	BOOTENV_DEV_NAME_BLKDEV
@@ -125,7 +130,7 @@
 			"${kernel_addr_r} efi/boot/"BOOTEFI_NAME"; "      \
 		"if fdt addr ${fdt_addr_r}; then "                        \
 			"bootefi ${kernel_addr_r} ${fdt_addr_r};"         \
-		"else "                                                    \
+		"else "                                                   \
 			"bootefi ${kernel_addr_r} ${fdtcontroladdr};"     \
 		"fi\0"                                                    \
 	\
-- 
2.16.0