[U-Boot] [PATCH 2/2] mx6memcal: enable SDP support

[Fabio Estevam]

On Thu, Jan 18, 2018 at 12:47 PM, Eric Nelson <eric at nelint.com> wrote:
> The initial implementation of mx6memcal reset the CPU after
> running the memory calibration procedure because the generic
> board has no information about which boot devices are available.
>
> Now that we have SDP support in SPL, use it to allow a full
> U-Boot to be uploaded (i.e. to use "mtest").
>
> Signed-off-by: Eric Nelson <eric at nelint.com>

Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>