[U-Boot] [PATCH] doc: Update the zynq u-boot status

[Michal Simek]

On 13.1.2018 21:48, Ezequiel Garcia wrote:
> NAND and QSPI devices are now supported, so mark
> them as such.
> 
> Cc: Michal Simek <michal.simek at xilinx.com>
> Signed-off-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
> ---
>  doc/README.zynq | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/doc/README.zynq b/doc/README.zynq
> index b89c39edac18..451743f39eaa 100644
> --- a/doc/README.zynq
> +++ b/doc/README.zynq
> @@ -62,9 +62,10 @@ bootmode strings at runtime.
>    serial - drivers/serial/serial_zynq.c
>    net - drivers/net/zynq_gem.c
>    mmc - drivers/mmc/zynq_sdhci.c
> -  mmc - drivers/mmc/zynq_sdhci.c
> -  spi-  drivers/spi/zynq_spi.c
> +  spi - drivers/spi/zynq_spi.c
> +  qspi - drivers/spi/zynq_qspi.c
>    i2c - drivers/i2c/zynq_i2c.c
> +  nand - drivers/mtd/nand/zynq_nand.c
>  - Done proper cleanups on board configurations
>  - Added basic FDT support for zynq boards
>  - d-cache support for zynq_gem.c
> @@ -72,8 +73,6 @@ bootmode strings at runtime.
>  6. TODO
>  
>  - Add zynq boards support - zc770_xm011
> -- Add zynq qspi controller driver
> -- Add zynq nand controller driver
>  - Add FDT support on individual drivers
>  
>  [1] http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm
> 

Applied.

Thanks,
Michal