[U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)

[Icenowy Zheng]

于 2018年7月26日 GMT+08:00 下午3:02:50, Jagan Teki <jagan at amarulasolutions.com> 写到:
>On Sat, Jul 21, 2018 at 1:50 PM, Icenowy Zheng <icenowy at aosc.io> wrote:
>> This patchset trys to add support for Allwinner H6 SoC to U-Boot.
>>
>> Allwinner H6 is a quite new Allwinner SoC, with several parts changed
>a
>> lot (memory map, DRAM controller, CCU, so on). The position which SPL
>> will be loaded (SRAM A1) also changed to 0x20000.
>>
>> The Pine H64 board support comes with this patchset, as this is the
>> first H6 board that I can get (being early bird).
>>
>> Icenowy Zheng (13):
>>   sunxi: change SUNXI_HIGH_SRAM option to SUNXI_SRAM_ADDRESS
>>   sunxi: add basic memory map definitions of H6 SoC
>>   sunxi: change RMR64's RVBAR address for H6
>>   sunxi: change ATF position for H6
>>   sunxi: add config for SPL at 0x20000 on H6
>>   sunxi: change GIC address on H6
>>   sunxi: add clock code for H6
>>   sunxi: use sun6i-style watchdog for H6
>>   sunxi: add UART0 setup for H6
>>   sunxi: add MMC support for H6
>>   sunxi: add DRAM support to H6
>>   sunxi: add support for Allwinner H6 SoC
>>   sunxi: add support for Pine H64 board
>
>Observing SPL hang during relocation switch to board_init_r with
>orangepi board[1], will pine boot? look like both seem similar LPDDR3
>configs atleast from schematics.

Use v2.1 DRAM patch.

>
>U-Boot SPL 2018.07-00382-g2e8302784f-dirty (Jul 26 2018 - 12:13:35
>+0530)
>DRAM: 1024 MiB
>sunxi_board_init...done!
>
>[1] http://linux-sunxi.org/Xunlong_Orange_Pi_One_Plus