[U-Boot] [PATCH 3/4] usb: xhci-dwc3: Add USB2 PHY configuration

Marek Vasut marex at denx.de
Sun Jun 30 13:36:03 UTC 2019


On 6/30/19 3:31 PM, Kever Yang wrote:
> Hi Mark,
> 
>     I add Marek and Bin Meng for this patch, I'm not sure where
> 
> are these phy setting should go.
> 
> Thanks,
> - Kever
> On 06/30/2019 12:29 AM, Mark Kettenis wrote:
>> Configure USB2 PHY register based on "phy_type" property and
>> handle all the quirks that are relevant for Rockchip RK3399 SoCs.

Is this a documented DT property or some ad-hoc U-Boot one ?
Is this a fix for this release or feature for next ?

>> Signed-off-by: Mark Kettenis <kettenis at openbsd.org>
>> ---
>>  drivers/usb/host/xhci-dwc3.c | 20 ++++++++++++++++++++
>>  1 file changed, 20 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
>> index 83b9f119e7..ed955dc8b8 100644
>> --- a/drivers/usb/host/xhci-dwc3.c
>> +++ b/drivers/usb/host/xhci-dwc3.c
>> @@ -118,6 +118,8 @@ static int xhci_dwc3_probe(struct udevice *dev)
>>  	struct dwc3 *dwc3_reg;
>>  	enum usb_dr_mode dr_mode;
>>  	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
>> +	const char *phy;
>> +	u32 reg;
>>  	int ret;
>>  
>>  	hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
>> @@ -132,6 +134,24 @@ static int xhci_dwc3_probe(struct udevice *dev)
>>  
>>  	dwc3_core_init(dwc3_reg);
>>  
>> +	/* Set dwc3 usb2 phy config */
>> +	reg = readl(&dwc3_reg->g_usb2phycfg[0]);
>> +
>> +	phy = dev_read_string(dev, "phy_type");
>> +	if (phy && strcmp(phy, "utmi_wide") == 0) {
>> +		reg |= DWC3_GUSB2PHYCFG_PHYIF;
>> +		reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
>> +		reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
>> +	}
>> +
>> +	if (dev_read_bool(dev, "snps,dis-enblslpm-quirk"))
>> +		reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
>> +
>> +	if (dev_read_bool(dev, "snps,dis-u2-freeclk-exists-quirk"))
>> +		reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS;
>> +
>> +	writel(reg, &dwc3_reg->g_usb2phycfg[0]);
>> +
>>  	dr_mode = usb_get_dr_mode(dev_of_offset(dev));
>>  	if (dr_mode == USB_DR_MODE_UNKNOWN)
>>  		/* by default set dual role mode to HOST */
> 
> 
> 


-- 
Best regards,
Marek Vasut

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-56 Email: marex at denx.de


More information about the U-Boot mailing list