[PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs
Soeren Moch
smoch at web.de
Mon Aug 3 23:13:49 CEST 2020
On 03.08.20 15:45, Anatolij Gustschin wrote:
> Since commit 7812bbdc3732 ("video: Correctly handle multiple
> framebuffers") the vidconsole output is missing on the primary
> display on boards with two IPU units (all i.MX6Q/D based boards).
> The base address of the allocated framebuffer is not correctly
> programmed in the display controller. Fix it.
>
> Reported-by: Soeren Moch <smoch at web.de>
> Signed-off-by: Anatolij Gustschin <agust at denx.de>
Successfully tested on a tbs2910 board (i.MX6Q based).
Tested-by: Soeren Moch <smoch at web.de>
Thanks,
Soeren
> ---
> drivers/video/imx/mxc_ipuv3_fb.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/video/imx/mxc_ipuv3_fb.c b/drivers/video/imx/mxc_ipuv3_fb.c
> index 587d62f2d8..4c20ec5e66 100644
> --- a/drivers/video/imx/mxc_ipuv3_fb.c
> +++ b/drivers/video/imx/mxc_ipuv3_fb.c
> @@ -66,6 +66,7 @@ static void fb_videomode_to_var(struct fb_var_screeninfo *var,
> * Structure containing the MXC specific framebuffer information.
> */
> struct mxcfb_info {
> + struct udevice *udev;
> int blank;
> ipu_channel_t ipu_ch;
> int ipu_di;
> @@ -381,13 +382,16 @@ static int mxcfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
>
> static int mxcfb_map_video_memory(struct fb_info *fbi)
> {
> + struct mxcfb_info *mxc_fbi = (struct mxcfb_info *)fbi->par;
> + struct video_uc_platdata *plat = dev_get_uclass_platdata(mxc_fbi->udev);
> +
> if (fbi->fix.smem_len < fbi->var.yres_virtual * fbi->fix.line_length) {
> fbi->fix.smem_len = fbi->var.yres_virtual *
> fbi->fix.line_length;
> }
> fbi->fix.smem_len = roundup(fbi->fix.smem_len, ARCH_DMA_MINALIGN);
>
> - fbi->screen_base = (char *)gd->video_bottom;
> + fbi->screen_base = (char *)plat->base;
>
> fbi->fix.smem_start = (unsigned long)fbi->screen_base;
> if (fbi->screen_base == 0) {
> @@ -477,8 +481,8 @@ extern struct clk *g_ipu_clk;
> *
> * @return Appropriate error code to the kernel common code
> */
> -static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp,
> - struct fb_videomode const *mode)
> +static int mxcfb_probe(struct udevice *dev, u32 interface_pix_fmt,
> + uint8_t disp, struct fb_videomode const *mode)
> {
> struct fb_info *fbi;
> struct mxcfb_info *mxcfbi;
> @@ -501,6 +505,7 @@ static int mxcfb_probe(u32 interface_pix_fmt, uint8_t disp,
> }
>
> mxcfbi->ipu_di = disp;
> + mxcfbi->udev = dev;
>
> if (!ipu_clk_enabled())
> clk_enable(g_ipu_clk);
> @@ -600,7 +605,7 @@ static int ipuv3_video_probe(struct udevice *dev)
> if (ret < 0)
> return ret;
>
> - ret = mxcfb_probe(gpixfmt, gdisp, gmode);
> + ret = mxcfb_probe(dev, gpixfmt, gdisp, gmode);
> if (ret < 0)
> return ret;
>
More information about the U-Boot
mailing list