August 2020 Archives by subject
Starting: Sat Aug 1 02:26:54 CEST 2020
Ending: Mon Aug 31 23:53:55 CEST 2020
Messages: 2835
- [ANN] U-Boot v2020.10-rc1 released
Michal Simek
- [ANN] U-Boot v2020.10-rc1 released
Tom Rini
- [ANN] U-Boot v2020.10-rc1 released
Michal Simek
- [ANN] U-Boot v2020.10-rc2 released
Tom Rini
- [ANN] U-Boot v2020.10-rc2 released
Tom Rini
- [ANN] U-Boot v2020.10-rc3 released
Tom Rini
- [BUG] DM_VIDEO broken on imx6q
Soeren Moch
- [BUG] DM_VIDEO broken on imx6q
Anatolij Gustschin
- [BUG] DM_VIDEO broken on imx6q
Soeren Moch
- [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Kostya Porotchkin
- [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Stefan Roese
- [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Kostya Porotchkin
- [EXT] [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot
Kostya Porotchkin
- [EXT] [PATCH 1/2] mmc: xenon: set signal voltage and max base clock
Kostya Porotchkin
- [EXT] [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Kostya Porotchkin
- [EXT] [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Stefan Roese
- [EXT] [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Kostya Porotchkin
- [EXT] [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Kostya Porotchkin
- [EXT] [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Kostya Porotchkin
- [EXT] [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform
Kuldeep Singh
- [EXT] [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform
Meenakshi Aggarwal
- [EXT] [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Kostya Porotchkin
- [EXT] [PATCH v2] ls1028a: use default scan_dev_for_boot
Mian Yousaf Kaukab
- [EXT] [PATCH v5 1/2] board: kontron: add sl28 support
Kuldeep Singh
- [EXT] Re: [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA
Kostya Porotchkin
- [GIT] Pull request: u-boot-clk (24.08.2020)
Lukasz Majewski
- [GIT] Pull request: u-boot-clk (24.08.2020)
Tom Rini
- [GIT] Pull request: u-boot-dfu (27.08.2019)
Lukasz Majewski
- [GIT] Pull request: u-boot-dfu (27.08.2019)
Marek Vasut
- [GIT] Pull request: u-boot-dfu (27.08.2019)
Lukasz Majewski
- [GIT] Pull request: u-boot-dfu (27.08.2019)
Marek Vasut
- [GIT] Pull request: u-boot-dfu (30.08.2019)
Lukasz Majewski
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200804
Stefano Babic
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200804
Tom Rini
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200825
Stefano Babic
- [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200825
Tom Rini
- [GIT PULL] TI changes for v2020.10-rc3
Lokesh Vutla
- [GIT PULL] TI changes for v2020.10-rc3
Tom Rini
- [GIT PULL] TI changes for v2020.10-rc3
Jan Kiszka
- [GIT PULL] TI changes for v2020.10-rc3
Tom Rini
- [GIT PULL] TI changes for v2020.10-rc3
Lokesh Vutla
- [GIT PULL] TI changes for v2020.10-rc3
Tom Rini
- [GIT PULL] TI changes for v2020.10-rc4
Lokesh Vutla
- [GIT PULL] TI changes for v2020.10-rc4
Tom Rini
- [GIT PULL] UniPhier SoC updates for v2020.10-rc3
Masahiro Yamada
- [GIT PULL] UniPhier SoC updates for v2020.10-rc3
Tom Rini
- [GIT PULL] xilinx patches for v2020.10-rc3
Michal Simek
- [GIT PULL] xilinx patches for v2020.10-rc3
Tom Rini
- [GIT PULL v2] TI changes for v2020.10-rc3
Lokesh Vutla
- [GIT PULL v2] TI changes for v2020.10-rc3
Tom Rini
- [PATCH 0/1] fs/squashfs: Fix Coverity Scan defects
Joao Marcos Costa
- [PATCH 0/2][v2] Raspberry pi improvements usb core
Jason Wessel
- [PATCH 0/2] Add DTS for BananaPi-R64
Frank Wunderlich
- [PATCH 0/2] arm: mvebu: Espressobin: Add support for SD card
Pali Rohár
- [PATCH 0/2] board/freescale/vid: rework of VID support
Wasim Khan
- [PATCH 0/2] efi_loader: set load options in boot manager
Heinrich Schuchardt
- [PATCH 0/2] fs/squashfs: Add new decompression algorithms
Joao Marcos Costa
- [PATCH 0/2] fs/squashfs: Add new decompression algorithms
Tom Rini
- [PATCH 0/2] fs/squashfs: Add new decompression algorithms
Joao Marcos Costa
- [PATCH 0/2] fs/squashfs: Add new decompression algorithms
Joao Marcos Costa
- [PATCH 0/2] fs/squashfs: Add new decompression algorithms
Tom Rini
- [PATCH 0/2] iEi Puzzle-M801 board support
Luka Kovacic
- [PATCH 0/2] Update TI K3 cbass interconnect node names
Lokesh Vutla
- [PATCH 0/2] x86: Minor nits from previous reviews
Simon Glass
- [PATCH 0/3] Add USB for MT7622/MT7623
Frank Wunderlich
- [PATCH 0/3] arm: k3: Update to SYFW ABI 3.0 changes
Lokesh Vutla
- [PATCH 0/3] arm: k3: Update to SYFW ABI 3.0 changes
Lokesh Vutla
- [PATCH 0/3] binman: Make FIT image subentries respect offset, alignment and padding
Alper Nebi Yasak
- [PATCH 0/3] Configure J721E Main R5FSS1 to Split-mode & env
Suman Anna
- [PATCH 0/3] MCU R5F branch-only boot on J7200 SoCs
Suman Anna
- [PATCH 0/3] Misc fixes/cleanup
Sean Anderson
- [PATCH 0/3] net: tftp: Fixes for tftp rollover
Ley Foon Tan
- [PATCH 0/3] Rename ASPEED SoC clock name
Ryan Chen
- [PATCH 0/3] Rename ASPEED SoC clock name
Cédric Le Goater
- [PATCH 0/3] Rename ASPEED SoC clock name
Ryan Chen
- [PATCH 0/3] RISC-V tracing support
Pragnesh Patel
- [PATCH 0/4] binman: Add support for Python installation
Simon Glass
- [PATCH 0/4] efi_loader: validate device path length in boot manager
Heinrich Schuchardt
- [PATCH 0/4] xilinx: common: Fix fdt/initrd_high and bootm_* variables
Michal Simek
- [PATCH 0/4] xilinx: common: Fix fdt/initrd_high and bootm_* variables
Michal Simek
- [PATCH 0/5] Add PCIe and its clock support for mt7622
Chuanjia Liu
- Aw: [PATCH 0/5] Add PCIe and its clock support for mt7622
Frank Wunderlich
- [PATCH 0/5] Add PCIe and its clock support for mt7622
Henry Yen
- Aw: Re: [PATCH 0/5] Add PCIe and its clock support for mt7622
Frank Wunderlich
- [PATCH 0/5] add SATA/AHCI support for BananaPi R64
Frank Wunderlich
- [PATCH 0/5] Follow up to "Add new board: Xen guest for ARM64" series
Anastasiia Lukianenko
- [PATCH 0/5] J7200: Add HyperFlash boot support
Vignesh Raghavendra
- [PATCH 0/6] efi_selftest: allow UEFI testing on MAIX
Sean Anderson
- [PATCH 0/6] J2700: Enable various peripherals
Vignesh Raghavendra
- [PATCH 0/6] J2700: Enable various peripherals
Grygorii Strashko
- [PATCH 0/6] J2700: Enable various peripherals
Lokesh Vutla
- [PATCH 0/6] J2700: Enable various peripherals
Lokesh Vutla
- [PATCH 0/6] Refactor Aspeed SoCs support
Chia-Wei, Wang
- [PATCH 0/7] binman: Add support for generating more complex FITs
Simon Glass
- [PATCH 0/7] binman: Add support for generating more complex FITs
Heinrich Schuchardt
- [PATCH 0/7] binman: Add support for generating more complex FITs
Heinrich Schuchardt
- [PATCH 0/7] binman: Add support for generating more complex FITs
Simon Glass
- [PATCH 0/7] binman: Add support for generating more complex FITs
Heinrich Schuchardt
- [PATCH 0/7] binman: Add support for generating more complex FITs
Simon Glass
- [PATCH 0/8] Early-boot support of R5FSS from A72 U-Boot for J7200 SoCs
Suman Anna
- [PATCH 0/8] xilinx: zynqmp: Silicon name cleanup
Michal Simek
- [PATCH 0/8] xilinx: zynqmp: Silicon name cleanup
Michal Simek
- [PATCH 0/9] Incorrect Kconfig dependencies
Michal Simek
- [PATCH 00/16] common: Drop remaining includes in common.h
Simon Glass
- [PATCH 00/16] x86: zboot: Enhance the 'zboot' command
Simon Glass
- [PATCH 00/16] x86: zboot: Enhance the 'zboot' command
Wolfgang Wallner
- [PATCH 00/31] Add DM support for omap PWM backlight
Dario Binacchi
- [PATCH 01/11] mtd: rawnand: stm32_fmc2: fix a buffer overflow
Patrice CHOTARD
- [PATCH 01/11] mtd: rawnand: stm32_fmc2: fix a buffer overflow
Patrice CHOTARD
- [PATCH 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct
Chunfeng Yun
- [PATCH 01/16] common: Drop asm/global_data.h from common header
Simon Glass
- [PATCH 01/16] x86: Update the bootparam header
Simon Glass
- [PATCH 01/16] x86: Update the bootparam header
Wolfgang Wallner
- [PATCH 01/22] clk: check hw and hw->dev before dereference it
Simon Glass
- [PATCH 01/22] clk: check hw and hw->dev before dereference it
Claudiu.Beznea at microchip.com
- [PATCH 01/22] clk: check hw and hw->dev before dereference it
Simon Glass
- [PATCH 01/22] clk: check hw and hw->dev before dereference it
Claudiu.Beznea at microchip.com
- [PATCH 01/22] clk: check hw and hw->dev before dereference it
Simon Glass
- [PATCH 01/22] clk: check hw and hw->dev before dereference it
Claudiu.Beznea at microchip.com
- [PATCH 01/31] clk: remove a redundant header
Dario Binacchi
- [PATCH 01/31] clk: remove a redundant header
Simon Glass
- [PATCH 01/31] spi: Allow separate control of SPI_FLASH_TINY for SPL/TPL
Tom Rini
- [PATCH 02/11] mtd: rawnand: stm32_fmc2: remove useless inline comments
Patrice CHOTARD
- [PATCH 02/11] mtd: rawnand: stm32_fmc2: remove useless inline comments
Patrice CHOTARD
- [PATCH 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.
Chunfeng Yun
- [PATCH 02/16] common: Drop display_options.h from common header
Simon Glass
- [PATCH 02/16] x86: zimage: Use a state struct to hold the state
Simon Glass
- [PATCH 02/16] x86: zimage: Use a state struct to hold the state
Wolfgang Wallner
- [PATCH 02/22] clk: check pointer returned by dev_get_parent()
Simon Glass
- [PATCH 02/22] clk: check pointer returned by dev_get_parent()
Claudiu.Beznea at microchip.com
- [PATCH 02/31] clk: export generic routines
Dario Binacchi
- [PATCH 02/31] clk: export generic routines
Simon Glass
- [PATCH 02/31] mtd: spi-nor: Tidy up error handling / debug code
Tom Rini
- [PATCH 03/11] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts
Patrice CHOTARD
- [PATCH 03/11] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts
Patrice CHOTARD
- [PATCH 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96
Chunfeng Yun
- Aw: [PATCH 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96
Frank Wunderlich
- Aw: [PATCH 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96
Chunfeng Yun
- [PATCH 03/16] common: Drop linux/printk.h from common header
Simon Glass
- [PATCH 03/16] x86: zimage: Avoid using #ifdef
Simon Glass
- [PATCH 03/16] x86: zimage: Avoid using #ifdef
Wolfgang Wallner
- [PATCH 03/22] dm: core: add support for device re-parenting
Simon Glass
- [PATCH 03/22] dm: core: add support for device re-parenting
Claudiu.Beznea at microchip.com
- [PATCH 03/31] arch: sandbox: fix typo in clk.h
Dario Binacchi
- [PATCH 03/31] arch: sandbox: fix typo in clk.h
Simon Glass
- [PATCH 03/31] wdt: Drop dm.h header file
Tom Rini
- [PATCH 04/11] mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant
Patrice CHOTARD
- [PATCH 04/11] mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant
Patrice CHOTARD
- [PATCH 04/11] usb: xhci: convert to HCS_MAX_PORTS()
Chunfeng Yun
- [PATCH 04/16] Fix code style for time functions
Simon Glass
- [PATCH 04/16] x86: zboot: Move kernel-version code into a function
Simon Glass
- [PATCH 04/16] x86: zboot: Move kernel-version code into a function
Wolfgang Wallner
- [PATCH 04/22] clk: bind clk to new parent device
Simon Glass
- [PATCH 04/22] clk: bind clk to new parent device
Claudiu.Beznea at microchip.com
- [PATCH 04/31] clk: add clk_round_rate()
Dario Binacchi
- [PATCH 04/31] clk: add clk_round_rate()
Simon Glass
- [PATCH 04/31] clk: add clk_round_rate()
Sean Anderson
- [PATCH 04/31] clk: add clk_round_rate()
Sean Anderson
- [PATCH 04/31] clk: add clk_round_rate()
Dario Binacchi
- [PATCH 04/31] mtd: spi-mem: Drop dm.h header file
Tom Rini
- [PATCH 05/11] mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
Patrice CHOTARD
- [PATCH 05/11] mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
Patrice CHOTARD
- [PATCH 05/11] usb: xhci: convert to TRB_TYPE()
Chunfeng Yun
- [PATCH 05/16] common: Drop time.h from common header
Simon Glass
- [PATCH 05/16] x86: zboot: Correct image type
Simon Glass
- [PATCH 05/16] x86: zboot: Correct image type
Wolfgang Wallner
- [PATCH 05/22] clk: do not disable clock if it is critical
Simon Glass
- [PATCH 05/31] clk: ti: add mux clock driver
Dario Binacchi
- [PATCH 05/31] mtd: spi: Drop SPI_XFER_MMAP*
Tom Rini
- [PATCH 06/11] mtd: rawnand: stm32_fmc2: use clrsetbits_le32
Patrice CHOTARD
- [PATCH 06/11] mtd: rawnand: stm32_fmc2: use clrsetbits_le32
Patrice CHOTARD
- [PATCH 06/11] usb: xhci: convert to TRB_INTR_TARGET()
Chunfeng Yun
- [PATCH 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes
Faiz Abbas
- [PATCH 06/16] common: Drop linux/string.h from common header
Simon Glass
- [PATCH 06/16] x86: zimage: Disable interrupts just before booting
Simon Glass
- [PATCH 06/16] x86: zimage: Disable interrupts just before booting
Wolfgang Wallner
- [PATCH 06/22] clk: get clock pointer before proceeding
Simon Glass
- [PATCH 06/22] clk: get clock pointer before proceeding
Claudiu.Beznea at microchip.com
- [PATCH 06/31] arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro
Dario Binacchi
- [PATCH 06/31] dm: core: Drop dm.h header file from dm-demo.h
Tom Rini
- [PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
Patrice CHOTARD
- [PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
Patrice CHOTARD
- [PATCH 07/11] usb: xhci: convert to TRB_LEN()
Chunfeng Yun
- [PATCH 07/16] common: Drop asm/u-boot.h from common header
Simon Glass
- [PATCH 07/16] x86: zboot: Set up a sub-command structure
Simon Glass
- [PATCH 07/16] x86: zboot: Set up a sub-command structure
Wolfgang Wallner
- [PATCH 07/31] clk: ti: am33xx: add DPLL clock drivers
Dario Binacchi
- [PATCH 07/31] dm: core: Drop header files from dm/test.h
Tom Rini
- [PATCH 08/11] mtd: rawnand: stm32_fmc2: get resources from parent node
Patrice CHOTARD
- [PATCH 08/11] mtd: rawnand: stm32_fmc2: get resources from parent node
Patrice CHOTARD
- [PATCH 08/11] usb: xhci: convert to TRB_TX_TYPE()
Chunfeng Yun
- [PATCH 08/16] common: Drop stdio.h from common header
Simon Glass
- [PATCH 08/16] x86: zboot: Add a 'go' subcommand
Simon Glass
- [PATCH 08/16] x86: zboot: Add a 'go' subcommand
Wolfgang Wallner
- [PATCH 08/31] clk: ti: add divider clock driver
Dario Binacchi
- [PATCH 08/31] fs: fs-loader: Drop dm.h header file
Tom Rini
- [PATCH 09/11] board: stm32mp1: update fdt fixup partitions table
Patrice CHOTARD
- [PATCH 09/11] usb: xhci: convert to EP_TYPE()
Chunfeng Yun
- [PATCH 09/16] common: Drop stdarg.h from common header
Simon Glass
- [PATCH 09/16] x86: zboot: Add an 'info' subcommand
Simon Glass
- [PATCH 09/16] x86: zboot: Add an 'info' subcommand
Wolfgang Wallner
- [PATCH 09/31] clk: ti: refactor mux and divider clock drivers
Dario Binacchi
- [PATCH 09/31] net: Drop dm.h header file from phy.h
Tom Rini
- [PATCH 1/1] bootm: update image OS image size when decompressing
Heinrich Schuchardt
- [PATCH 1/1] bootm: update image OS image size when decompressing
Simon Glass
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Bin Meng
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Sean Anderson
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Heinrich Schuchardt
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Sean Anderson
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Heinrich Schuchardt
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Sean Anderson
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Heinrich Schuchardt
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Heinrich Schuchardt
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Sean Anderson
- [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()
Bin Meng
- [PATCH 1/1] cmd/efidebug: missing initialization of load_options
Heinrich Schuchardt
- [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output
Simon Glass
- [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output
Tom Rini
- [PATCH 1/1] cmd: exception: unaligned data access on RISC-V
Heinrich Schuchardt
- [PATCH 1/1] cmd: exception: unaligned data access on RISC-V
Rick Chen
- [PATCH 1/1] cmd: exception: unaligned data access on RISC-V
Heinrich Schuchardt
- [PATCH 1/1] cmd: exception: unaligned data access on RISC-V
Rick Chen
- [PATCH 1/1] cmd: exception: unaligned data access on RISC-V
Leo Liang
- [PATCH 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH 1/1] cmd: provide command sbi
Bin Meng
- [PATCH 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH 1/1] cmd: provide command sbi
Bin Meng
- [PATCH 1/1] configs: defconfig for Sipeed Maix in S-mode
Heinrich Schuchardt
- [PATCH 1/1] dm: fix ofnode_read_addr/size_cells()
Simon Glass
- [PATCH 1/1] dm: syscon: typo alerady
Heinrich Schuchardt
- [PATCH 1/1] dm: syscon: typo alerady
Simon Glass
- [PATCH 1/1] doc: move Clang documentation to HTML
Tom Rini
- [PATCH 1/1] doc: qemu-mips build instructions
Daniel Schwierzeck
- [PATCH 1/1] doc: riscv: debug UART for MAIX
Rick Chen
- [PATCH 1/1] doc: riscv: debug UART for MAIX
Heinrich Schuchardt
- [PATCH 1/1] doc: update UEFI documentation
Heinrich Schuchardt
- [PATCH 1/1] efi: clean up efi command
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: check for image truncation
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: check for image truncation
AKASHI Takahiro
- [PATCH 1/1] efi_loader: document parameters of do_bootefi_exec()
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: error message if image not authenticated
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: remove duplicate image size check
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: remove empty comment line
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: use ':' as separator for setenv -i
Heinrich Schuchardt
- [PATCH 1/1] efi_selftest: add a test for ResetSystem()
Heinrich Schuchardt
- [PATCH 1/1] efi_selftest: simplify Makefile
Heinrich Schuchardt
- [PATCH 1/1] fastboot: Fix fastboot reboot fail by changing functions order
Yurii Pidhornyi
- [PATCH 1/1] fs/squashfs: Fix Coverity Scan defects
Joao Marcos Costa
- [PATCH 1/1] fs/squashfs: Fix Coverity Scan defects
Tom Rini
- [PATCH 1/1] fs: convert error and debug messages to log
Heinrich Schuchardt
- [PATCH 1/1] fs: convert error and debug messages to log
Simon Glass
- [PATCH 1/1] lib/crypto: simplify public_key_verify_signature
Heinrich Schuchardt
- [PATCH 1/1] lib/hashtable: remove superfluous check
Heinrich Schuchardt
- [PATCH 1/1] lib/hashtable: remove superfluous check
Simon Glass
- [PATCH 1/1] lib/rsa: correct check after allocation in fdt_add_bignum()
Heinrich Schuchardt
- [PATCH 1/1] lib/rsa: correct check after allocation in fdt_add_bignum()
Simon Glass
- [PATCH 1/1] lib/rsa: correct check after allocation in fdt_add_bignum()
Tom Rini
- [PATCH 1/1] lib: hang() must be __efi_runtime
Heinrich Schuchardt
- [PATCH 1/1] lib: rsa: remove redundant check
Heinrich Schuchardt
- [PATCH 1/1] lib: rsa: remove redundant check
George McCollister
- [PATCH 1/1] lib: rsa: remove redundant check
Heinrich Schuchardt
- [PATCH 1/1] lib: rsa: remove redundant check
Simon Glass
- [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()
Heinrich Schuchardt
- [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()
Simon Glass
- [PATCH 1/1] post: remove redundant condition
Heinrich Schuchardt
- [PATCH 1/1] post: remove redundant condition
Simon Glass
- [PATCH 1/1] Remove not used export function header.
Ryan Chen
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Heinrich Schuchardt
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Rick Chen
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Heinrich Schuchardt
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Sean Anderson
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Heinrich Schuchardt
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Bin Meng
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Sean Anderson
- [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()
Heinrich Schuchardt
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Heinrich Schuchardt
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Bin Meng
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Simon Glass
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Rick Chen
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Heinrich Schuchardt
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Bin Meng
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Heinrich Schuchardt
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Bin Meng
- [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Andy Shevchenko
- [PATCH 1/1] riscv: remove redundant logical constraint.
Heinrich Schuchardt
- [PATCH 1/1] riscv: remove redundant logical constraint.
Bin Meng
- [PATCH 1/1] riscv: remove redundant logical constraint.
Rick Chen
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Heinrich Schuchardt
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Anup Patel
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Heinrich Schuchardt
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Anup Patel
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Heinrich Schuchardt
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Anup Patel
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Heinrich Schuchardt
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Anup Patel
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Heinrich Schuchardt
- [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE
Anup Patel
- [PATCH 1/1] riscv: sifive: fu540: redundant initialization
Heinrich Schuchardt
- [PATCH 1/1] riscv: sifive: fu540: redundant initialization
Bin Meng
- [PATCH 1/1] riscv: sifive: fu540: redundant initialization
Pragnesh Patel
- [PATCH 1/1] riscv: sifive: fu540: redundant initialization
Rick Chen
- [PATCH 1/1] test/py: serial# cannot be overwritten on some devices
Heinrich Schuchardt
- [PATCH 1/1] test/py: serial# cannot be overwritten on some devices
Tom Rini
- [PATCH 1/1] test: py: test_shell_run() with CONFIG_HUSH_PARSER=n
Heinrich Schuchardt
- [PATCH 1/1] test: py: test_shell_run() with CONFIG_HUSH_PARSER=n
Tom Rini
- [PATCH 1/1] test: undefined reference to 'sscanf'
Heinrich Schuchardt
- [PATCH 1/1] test: undefined reference to 'sscanf'
Tom Rini
- [PATCH 1/1] timer: dw-apb: fix compiler warnings
Bin Meng
- [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Pali Rohár
- [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Stefan Roese
- [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Andre Heider
- [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Stefan Roese
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Andre Heider
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Pali Rohár
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Pali Rohár
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Andre Heider
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Andre Heider
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Pali Rohár
- [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream
Andre Heider
- [PATCH 1/2] arm: dts: add watchdog-node for mt7622
Frank Wunderlich
- [PATCH 1/2] arm: dts: add watchdog-node for mt7622
Tom Rini
- [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot
Pali Rohár
- [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot
Stefan Roese
- [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot
Andre Heider
- [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot
Stefan Roese
- [PATCH 1/2] arm: mvebu: Initial iEi Puzzle-M801 support
Luka Kovacic
- [PATCH 1/2] ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu
Marek Vasut
- [PATCH 1/2] avb: Make AVB independent of fastboot
Usama Arif
- [PATCH 1/2] avb: Make AVB independent of fastboot
Tom Rini
- [PATCH 1/2] avb: Make AVB independent of fastboot
Igor Opaniuk
- [PATCH 1/2] avb: Make AVB independent of fastboot
Tom Rini
- [PATCH 1/2] binman: Use pkg_resources to find resources
Simon Glass
- [PATCH 1/2] board/freescale/vid: rework of VID support
Wasim Khan
- [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses
Soeren Moch
- [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses
Fabio Estevam
- [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses
Tom Rini
- [PATCH 1/2] board_f: Remove dead code from init_func_i2c
Ovidiu Panait
- [PATCH 1/2] board_f: Remove dead code from init_func_i2c
Simon Glass
- [PATCH 1/2] board_f: Remove dead code from init_func_i2c
Simon Glass
- [PATCH 1/2] cmd: clk: cosmetic: correct code alignment in show_clks
Simon Glass
- [PATCH 1/2] configs: odroid-n2: update for HDMI output & USB keyboard
Anand Moon
- [PATCH 1/2] configs: odroid-n2: update for HDMI output & USB keyboard
Neil Armstrong
- [PATCH 1/2] core: improve of_match_ptr with OF_PLATDATA
Simon Glass
- [PATCH 1/2] defconfig: espressobin: Include support for Gigadevice SPI
Andre Heider
- [PATCH 1/2] dm: core: Fix devfdt_get_addr_ptr return value
Ovidiu Panait
- [PATCH 1/2] dm: core: Fix devfdt_get_addr_ptr return value
Simon Glass
- [PATCH 1/2] dm: core: Fix devfdt_get_addr_ptr return value
Simon Glass
- [PATCH 1/2] efi_loader: factor out efi_set_load_options()
Heinrich Schuchardt
- [PATCH 1/2] efi_loader: signature: correct a behavior against multiple signatures
AKASHI Takahiro
- [PATCH 1/2] efi_loader: signature: correct a behavior against multiple signatures
Heinrich Schuchardt
- [PATCH 1/2] fdtdec: optionally add property no-map to created reserved memory node
Patrice Chotard
- [PATCH 1/2] fdtdec: optionally add property no-map to created reserved memory node
Simon Glass
- [PATCH 1/2] fdtdec: optionally add property no-map to created reserved memory node
Patrice CHOTARD
- [PATCH 1/2] fs/squashfs: add support for LZO decompression
Joao Marcos Costa
- [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup
Robert Marko
- [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup
Tom Rini
- [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup
Robert Marko
- [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup
Tom Rini
- [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup
Robert Marko
- [PATCH 1/2] mmc: remove duplicate mmc_get_env_dev() implementations
David Woodhouse
- [PATCH 1/2] mmc: xenon: set signal voltage and max base clock
Pali Rohár
- [PATCH 1/2] mmc: xenon: set signal voltage and max base clock
Stefan Roese
- [PATCH 1/2] mmc: xenon: set signal voltage and max base clock
Andre Heider
- [PATCH 1/2] mmc: xenon: set signal voltage and max base clock
Stefan Roese
- [PATCH 1/2] riscv: fu540: Use correct API to get L2 cache controller base address
Bin Meng
- [PATCH 1/2] riscv: fu540: Use correct API to get L2 cache controller base address
Rick Chen
- [PATCH 1/2] riscv: fu540: Use correct API to get L2 cache controller base address
Pragnesh Patel
- [PATCH 1/2] rockchip: dts: rk3399-evb: add sdmmc node
Kever Yang
- [PATCH 1/2] rockchip: rk3188: Fix the code support for SPL_LED
Kever Yang
- [PATCH 1/2] ti: Use devtype=mmc instead of setenv devtype mmc
Matwey V. Kornilov
- [PATCH 1/2] tools: env: Fix printf() warning in fw_env
Simon Glass
- [PATCH 1/2] tools: env: Fix printf() warning in fw_env
Tom Rini
- [PATCH 1/2] x86: apl: fsp_bindings: Add support for u64 parameters
Bin Meng
- [PATCH 1/2] x86: pinctrl: Fix 'relatove' typo
Simon Glass
- [PATCH 1/2] xenon_sdhci: support for HS200 mode
Andre Heider
- [PATCH 1/2] xenon_sdhci: support for HS200 mode
Pali Rohár
- [PATCH 1/2] xenon_sdhci: support for HS200 mode
Andre Heider
- [PATCH 1/2] xenon_sdhci: support for HS200 mode
Pali Rohár
- [PATCH 1/3] arm: dts: k3-j721e-main: Configure MAIN R5FSS1 for Split-mode
Suman Anna
- [PATCH 1/3] binman: Ignore hash*, signature* nodes in sections
Alper Nebi Yasak
- [PATCH 1/3] binman: Ignore hash*, signature* nodes in sections
Simon Glass
- [PATCH 1/3] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCH 1/3] cosmetic: aspeed: ast2500: Rename clock header
Ryan Chen
- [PATCH 1/3] doc: Fix typo in FIT documentation
Sean Anderson
- [PATCH 1/3] env: ti: j721e-evm: Update R5 SPL rproc env variables for J7200
Suman Anna
- [PATCH 1/3] firmware: ti_sci: drop the device ids to resource id translation table
Lokesh Vutla
- [PATCH 1/3] gpio: at91: use dev_read_addr() to get base address
Masahiro Yamada
- [PATCH 1/3] gpio: at91: use dev_read_addr() to get base address
Simon Glass
- [PATCH 1/3] net: tftp: Fix tftp_prev_block counter update
Ley Foon Tan
- [PATCH 1/3] riscv: Add timer_get_us() for tracing
Pragnesh Patel
- [PATCH 1/3] sh: Set gd->malloc_base if MALLOC_F_LEN is set
Marek Vasut
- [PATCH 1/4] ARM: imx: Add bmode support for iMX7
Marek Vasut
- [PATCH 1/4] ARM: imx: Add bmode support for iMX7
Stefano Babic
- [PATCH 1/4] ARM: imx: Add bmode support for iMX7
Marek Vasut
- [PATCH 1/4] ARM: imx: Add bmode support for iMX7
Stefano Babic
- [PATCH 1/4] ARM: imx: Add bmode support for iMX7
Marek Vasut
- [PATCH 1/4] ARM: imx: Add bmode support for iMX7
sbabic at denx.de
- [PATCH 1/4] arm: mvebu: armada-xp-theadorable.dts: Fix dtc warning
Stefan Roese
- [PATCH 1/4] binman: Move GetEntryModules() to control
Simon Glass
- [PATCH 1/4] binman: Move GetEntryModules() to control
Simon Glass
- [PATCH 1/4] clk: clk-imx8mm: Add flexspi clock and fix set parent
Lukasz Majewski
- [PATCH 1/4] firmware: add new driver for SCMI firmwares
Etienne Carriere
- [PATCH 1/4] firmware: add new driver for SCMI firmwares
Simon Glass
- [PATCH 1/4] include: kernel.h: define SSIZE_MAX
Heinrich Schuchardt
- [PATCH 1/4] xilinx: common: Get rid of fdt_high variable
Michal Simek
- [PATCH 1/5] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH 1/5] arm: mach-k3: Add HyperFlash boot mode support
Vignesh Raghavendra
- [PATCH 1/5] arm: mvebu: Add CRS305-1G-4S Bit board
Stefan Roese
- [PATCH 1/5] arm: mvebu: Add CRS305-1G-4S Bit board
Stefan Roese
- [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses
Pali Rohár
- [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses
Stefan Roese
- [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses
Andre Heider
- [PATCH 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function
Anastasiia Lukianenko
- [PATCH 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function
Tom Rini
- [PATCH 1/5] clk: mediatek: add pciesys support for MT7622 SoC
Chuanjia Liu
- [PATCH 1/5] clk: mediatek: add pciesys support for MT7622 SoC
Tom Rini
- [PATCH 1/5] IPQ40xx: Add SMEM support
Robert Marko
- [PATCH 1/6] arm: dts: k3-j7200: Add USB related DT entries
Vignesh Raghavendra
- [PATCH 1/6] ARM: mach-at91: add support for new SoC sama7g5
Eugen Hristev
- [PATCH 1/6] MAINTAINERS: Add maintainers for Aspeed SoCs
Chia-Wei, Wang
- [PATCH 1/6] MAINTAINERS: Add maintainers for Aspeed SoCs
Tom Rini
- [PATCH 1/6] riscv: Call spl_board_init_f() in the generic SPL board_init_f()
Bin Meng
- [PATCH 1/6] riscv: Call spl_board_init_f() in the generic SPL board_init_f()
Rick Chen
- [PATCH 1/6] riscv: Call spl_board_init_f() in the generic SPL board_init_f()
Pragnesh Patel
- [PATCH 1/7] arm: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit
Kever Yang
- [PATCH 1/7] binman: Allow entry args to be required
Simon Glass
- [PATCH 1/7] usb: ehci-mx6: Add powerup_fixup implementation
Lukasz Majewski
- [PATCH 1/7] wdt: dw: Switch to using fls for log2
Sean Anderson
- [PATCH 1/7] wdt: dw: Switch to using fls for log2
Heinrich Schuchardt
- [PATCH 1/7] wdt: dw: Switch to using fls for log2
Sean Anderson
- [PATCH 1/8] dt-bindings: remoteproc: k3-r5f: Update bindings for J7200 SoCs
Suman Anna
- [PATCH 1/8] xilinx: zynqmp: synchronize firmware call return payload
Michal Simek
- [PATCH 1/9] pci: kconfig: Setup proper dependency for PCIE_ROCKCHIP
Michal Simek
- [PATCH 1/9] pci: kconfig: Setup proper dependency for PCIE_ROCKCHIP
Tom Rini
- [PATCH 1/9] pci: kconfig: Setup proper dependency for PCIE_ROCKCHIP
Tom Rini
- [PATCH 10/11] arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef
Patrice CHOTARD
- [PATCH 10/11] configs: stm32mp: add CONFIG_STM32_FMC2_EBI
Patrice CHOTARD
- [PATCH 10/11] configs: stm32mp: add CONFIG_STM32_FMC2_EBI
Patrice CHOTARD
- [PATCH 10/11] usb: xhci: use macros with parameter to fill ep_info2
Chunfeng Yun
- [PATCH 10/16] common: Drop vsprintf.h from common header
Simon Glass
- [PATCH 10/16] x86: zboot: Add an 'setup' subcommand
Simon Glass
- [PATCH 10/16] x86: zboot: Add an 'setup' subcommand
Wolfgang Wallner
- [PATCH 10/31] clk: ti: add gate clock driver
Dario Binacchi
- [PATCH 10/31] sf: Drop dm.h header file from spi_flash.h
Tom Rini
- [PATCH 11/11] ARM: dts: stm32: add FMC2 EBI support for stm32mp157c
Patrice CHOTARD
- [PATCH 11/11] ARM: dts: stm32: add FMC2 EBI support for stm32mp157c
Patrice CHOTARD
- [PATCH 11/11] arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef
Patrice CHOTARD
- [PATCH 11/11] usb: xhci: convet to readx_poll_sleep_timeout()
Chunfeng Yun
- Aw: [PATCH 11/11] usb: xhci: convet to readx_poll_sleep_timeout()
Frank Wunderlich
- Aw: [PATCH 11/11] usb: xhci: convet to readx_poll_sleep_timeout()
Chunfeng Yun
- [PATCH 11/16] common: Drop errno.h from common header
Simon Glass
- [PATCH 11/16] x86: zboot: Set environment variables for image locations
Simon Glass
- [PATCH 11/16] x86: zboot: Set environment variables for image locations
Wolfgang Wallner
- [PATCH 11/31] thermal: Drop dm.h header file
Tom Rini
- [PATCH 11/31] ti: am33xx: fix do_enable_clocks() to accept NULL parameters
Dario Binacchi
- [PATCH 11/31] ti: am33xx: fix do_enable_clocks() to accept NULL parameters
Simon Glass
- [PATCH 12/16] common: Drop linux/kernel.h from common header
Simon Glass
- [PATCH 12/16] x86: zboot: Allow setting a separate setup base address
Simon Glass
- [PATCH 12/16] x86: zboot: Allow setting a separate setup base address
Wolfgang Wallner
- [PATCH 12/31] clk: ti: add support for clkctrl clocks
Dario Binacchi
- [PATCH 12/31] w1: Drop dm.h header file
Tom Rini
- [PATCH 13/16] common: Drop linux/types.h from common header
Simon Glass
- [PATCH 13/16] x86: zboot: Add an option to dump the setup information
Simon Glass
- [PATCH 13/16] x86: zboot: Add an option to dump the setup information
Wolfgang Wallner
- [PATCH 13/31] clk: ti: move drivers to 'ti' directory
Dario Binacchi
- [PATCH 13/31] efi: Tidy up header includes
Tom Rini
- [PATCH 14/16] common: Move the build-system includes to a separate file
Simon Glass
- [PATCH 14/16] x86: zboot: Allow overriding the command line
Simon Glass
- [PATCH 14/16] x86: zboot: Allow overriding the command line
Wolfgang Wallner
- [PATCH 14/31] clk: ti: omap4: add clock manager driver
Dario Binacchi
- [PATCH 14/31] power: Tidy up inclusion of regulator_common.h
Tom Rini
- [PATCH 15/16] common: Add a comment about the current state of common.h
Simon Glass
- [PATCH 15/16] cros: Update chromium documentation
Simon Glass
- [PATCH 15/16] cros: Update chromium documentation
Wolfgang Wallner
- [PATCH 15/31] clk: ti: am335x: add clock manager driver
Dario Binacchi
- [PATCH 15/31] mmc: Drop duplicate dm.h inclusion
Tom Rini
- [PATCH 16/16] cros: Add information about booting Chrome OS on x86
Simon Glass
- [PATCH 16/16] cros: Add information about booting Chrome OS on x86
Wolfgang Wallner
- [PATCH 16/16] Makefile: Drop linux/kconfig.h from config.h
Simon Glass
- [PATCH 16/31] fdt: translate address if #size-cells = <0>
Dario Binacchi
- [PATCH 16/31] fdt: translate address if #size-cells = <0>
Simon Glass
- [PATCH 16/31] spi: Drop duplicate dm.h inclusion
Tom Rini
- [PATCH 17/31] omap: timer: fix the rate setting
Dario Binacchi
- [PATCH 17/31] ti: am654: Drop duplicate dm.h inclusion
Tom Rini
- [PATCH 18/31] liebherr: Drop duplicate dm.h inclusion
Tom Rini
- [PATCH 18/31] misc: am33xx: add control module driver
Dario Binacchi
- [PATCH 19/31] pci: Drop dm.h inclusion from header file
Tom Rini
- [PATCH 19/31] pwm: ti: am33xx: add enhanced pwm driver
Dario Binacchi
- [PATCH 2/2] am335x_evm: Allow booting from usb-storage device
Matwey V. Kornilov
- [PATCH 2/2] arch: x86: apl: Update FSP parameters
Bin Meng
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Pali Rohár
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Stefan Roese
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Pali Rohár
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Stefan Roese
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Pali Rohár
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Stefan Roese
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Pali Rohár
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Stefan Roese
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Andre Heider
- [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver
Stefan Roese
- [PATCH 2/2] arm64: dts: armada-3720-espressobin-emmc: add emmc dts
Andre Heider
- [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Pali Rohár
- [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Stefan Roese
- [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Andre Heider
- [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin
Stefan Roese
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Stefan Roese
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Stefan Roese
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Stefan Roese
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Stefan Roese
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Pali Rohár
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Andre Heider
- [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel
Stefan Roese
- [PATCH 2/2] arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking
Luka Kovacic
- [PATCH 2/2] ARM: rmobile: Enable dfu tftp on Gen3
Marek Vasut
- [PATCH 2/2] board/freescale/vid: Add support for LTC7132 voltage regulator
Wasim Khan
- [PATCH 2/2] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH 2/2] board: armltd: Add support for Total Compute platform
Tom Rini
- [PATCH 2/2] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig
Soeren Moch
- [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig
Fabio Estevam
- [PATCH 2/2] cmd: clk: correctly handle depth for clk dump
Simon Glass
- [PATCH 2/2] configs: odroid-c4: update for HDMI output background & USB keyboard
Anand Moon
- [PATCH 2/2] configs: odroid-c4: update for HDMI output background & USB keyboard
Neil Armstrong
- [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes
Andre Heider
- [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes
Pali Rohár
- [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes
Andre Heider
- [PATCH 2/2] dts: r64: add r64 dts
Frank Wunderlich
- [PATCH 2/2] dts: r64: add r64 dts
Tom Rini
- [PATCH 2/2] efi_loader: set load options in boot manager
Heinrich Schuchardt
- [PATCH 2/2] env/ext4.c: allow loading from an EXT4 partition on the MMC boot device
David Woodhouse
- [PATCH 2/2] fs/squashfs: add support for ZSTD decompression
Joao Marcos Costa
- [PATCH 2/2] fs/squashfs: add support for ZSTD decompression
Thomas Petazzoni
- [PATCH 2/2] fs/squashfs: add support for ZSTD decompression
Joao Marcos Costa
- [PATCH 2/2] IPQ40xx: Add SMEM support
Robert Marko
- [PATCH 2/2] optee: add property no-map to secure reserved memory
Patrice Chotard
- [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver
Andre Heider
- [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver
Pali Rohár
- [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver
Andre Heider
- [PATCH 2/2] ram: sifive: Fix compiler warnings for 32-bit
Bin Meng
- [PATCH 2/2] ram: sifive: Fix compiler warnings for 32-bit
Rick Chen
- [PATCH 2/2] ram: sifive: Fix compiler warnings for 32-bit
Pragnesh Patel
- [PATCH 2/2] rockchip: config: evb-rk3399: Add rockchip dwmmc support
Kever Yang
- [PATCH 2/2] rockchip: firefly-rk3288: Fix the code support for SPL_LED
Kever Yang
- [PATCH 2/2] sandbox: u-boot.lds: Remove bogus __bss_start symbol
Ovidiu Panait
- [PATCH 2/2] sandbox: u-boot.lds: Remove bogus __bss_start symbol
Simon Glass
- [PATCH 2/2] sandbox: u-boot.lds: Remove bogus __bss_start symbol
Simon Glass
- [PATCH 2/2] test/py: efi_secboot: modify 'multiple signatures' test case
AKASHI Takahiro
- [PATCH 2/2] test: dm: Add test case for devfdt_get_addr_ptr
Ovidiu Panait
- [PATCH 2/2] test: dm: Add test case for devfdt_get_addr_ptr
Simon Glass
- [PATCH 2/2] test: dm: Add test case for devfdt_get_addr_ptr
Simon Glass
- [PATCH 2/2] tools: Drop unnecessary use of __file__
Simon Glass
- [PATCH 2/2] tools: env: Avoid an uninited warning with was_locked
Simon Glass
- [PATCH 2/2] tools: env: Avoid an uninited warning with was_locked
Tom Rini
- [PATCH 2/2] x86: Drop nhlt_serialise()
Simon Glass
- [PATCH 2/3] arm: dts: k3-j7200-r5: Add fs_loader node
Suman Anna
- [PATCH 2/3] arm: dts: k3-j7200-r5: Add fs_loader node
Suman Anna
- [PATCH 2/3] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH 2/3] aspeed:clock: Sync with Linux kernel clock header define
Ryan Chen
- [PATCH 2/3] ata: mvebu: use dev_read_addr() to get base address
Masahiro Yamada
- [PATCH 2/3] ata: mvebu: use dev_read_addr() to get base address
Stefan Roese
- [PATCH 2/3] ata: mvebu: use dev_read_addr() to get base address
Simon Glass
- [PATCH 2/3] binman: Respect pad-before property of section subentries
Alper Nebi Yasak
- [PATCH 2/3] binman: Respect pad-before property of section subentries
Simon Glass
- [PATCH 2/3] configs: j721e_evm: Add Main R5FSS1 Core1 to default rproc boot list
Suman Anna
- [PATCH 2/3] firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
Lokesh Vutla
- [PATCH 2/3] net: tftp: Fix store_block offset calculation
Ley Foon Tan
- [PATCH 2/3] riscv: Mark riscv_timer_get_count() and sifive_clint_get_count() with 'notrace'
Pragnesh Patel
- [PATCH 2/3] sh: r2dplus: Add SCIF1 to the basic DT
Marek Vasut
- [PATCH 2/3] spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
Sean Anderson
- [PATCH 2/3] spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
Pratyush Yadav
- [PATCH 2/3] spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c
Sean Anderson
- [PATCH 2/4] ARM: imx: Add support for switching primary/secondary boot mode to bmode
Marek Vasut
- [PATCH 2/4] ARM: imx: Add support for switching primary/secondary boot mode to bmode
Stefano Babic
- [PATCH 2/4] ARM: imx: Add support for switching primary/secondary boot mode to bmode
sbabic at denx.de
- [PATCH 2/4] arm: mvebu: armada-xp-maxbcm.dts: Fix dtc warning
Stefan Roese
- [PATCH 2/4] binman: Correct some import statements
Simon Glass
- [PATCH 2/4] binman: Correct some import statements
Simon Glass
- [PATCH 2/4] efi_loader: efi_dp_check_length()
Heinrich Schuchardt
- [PATCH 2/4] xilinx: common: Get rid of initrd_high variable setup
Michal Simek
- [PATCH 2/5] arm: dts: mediatek: add pciesys support for MT7622 SoC
Chuanjia Liu
- [PATCH 2/5] arm: dts: mediatek: add pciesys support for MT7622 SoC
Tom Rini
- [PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board
Stefan Roese
- [PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board
Stefan Roese
- [PATCH 2/5] arm: mvebu: Espressobin: Change default loadaddr
Pali Rohár
- [PATCH 2/5] arm: mvebu: Espressobin: Change default loadaddr
Stefan Roese
- [PATCH 2/5] board: ti: j721e: Add support for HyperFlash detection
Vignesh Raghavendra
- [PATCH 2/5] MAINTAINERS: Add maintainers to XEN section
Anastasiia Lukianenko
- [PATCH 2/5] MAINTAINERS: Add maintainers to XEN section
Tom Rini
- [PATCH 2/5] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCH 2/5] reset: Add IPQ40xx reset controller driver
Robert Marko
- [PATCH 2/6] aspeed: ast2500: Add lowlevel_init assembly
Chia-Wei, Wang
- [PATCH 2/6] aspeed: ast2500: Add lowlevel_init assembly
Tom Rini
- [PATCH 2/6] board: ti: j721e: Add support for HyperFlash detection
Vignesh Raghavendra
- [PATCH 2/6] configs: reduce stack size of Sipeed MAIX
Sean Anderson
- [PATCH 2/6] pinctrl: at91-pio4: add compatible for sama7g5 pinctrl block
Eugen Hristev
- [PATCH 2/6] riscv: sifive/fu540: spl: Drop our own version of board_init_f()
Bin Meng
- [PATCH 2/6] riscv: sifive/fu540: spl: Drop our own version of board_init_f()
Rick Chen
- [PATCH 2/6] riscv: sifive/fu540: spl: Drop our own version of board_init_f()
Pragnesh Patel
- [PATCH 2/7] arm: dts: rockchip: Add Engicam PX30.Core SOM
Kever Yang
- [PATCH 2/7] binman: Fix up a few missing comments
Simon Glass
- [PATCH 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if
Sean Anderson
- [PATCH 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if
Heinrich Schuchardt
- [PATCH 2/8] remoteproc: k3-r5: Add support for J7200 R5Fs
Suman Anna
- [PATCH 2/8] xilinx: zynqmp: merge firmware calls for EL2 and EL3
Michal Simek
- [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt
Michal Simek
- [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt
Heinrich Schuchardt
- [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt
Michal Simek
- [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt
Heinrich Schuchardt
- [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt
Tom Rini
- [PATCH 20/31] mediatek: Drop dm.h header file
Tom Rini
- [PATCH 20/31] pwm: ti: am33xx: add subsystem driver
Dario Binacchi
- [PATCH 21/31] mscc: Drop dm.h header file
Tom Rini
- [PATCH 21/31] video: backlight: fix pwm's duty cycle calculation
Dario Binacchi
- [PATCH 21/31] video: backlight: fix pwm's duty cycle calculation
Simon Glass
- [PATCH 22/31] adc: Drop dm.h header file
Tom Rini
- [PATCH 22/31] video: backlight: fix pwm data structure description
Dario Binacchi
- [PATCH 23/31] dm: core: improve uclass_get_device_by_phandle_id() description
Dario Binacchi
- [PATCH 23/31] dm: core: improve uclass_get_device_by_phandle_id() description
Simon Glass
- [PATCH 23/31] nand: Drop dm.h header file
Tom Rini
- [PATCH 24/31] gpio: fix gpio_request_by_name() description
Dario Binacchi
- [PATCH 24/31] gpio: fix gpio_request_by_name() description
Simon Glass
- [PATCH 24/31] ufs: Drop dm.h header file
Tom Rini
- [PATCH 25/31] dm: core: add a function to decode display timings
Dario Binacchi
- [PATCH 25/31] dm: core: add a function to decode display timings
Simon Glass
- [PATCH 25/31] usb: Drop dm.h header file
Tom Rini
- [PATCH 26/31] clk: Drop dm.h header file in clk-provider.h
Tom Rini
- [PATCH 26/31] video: omap: add panel driver
Dario Binacchi
- [PATCH 27/31] net: Drop dm.h header file in eth_phy.h
Tom Rini
- [PATCH 27/31] video: omap: enable LCD clock domain through DM API
Dario Binacchi
- [PATCH 28/31] net: Drop duplicate include of dm.h in pcnet.c
Tom Rini
- [PATCH 28/31] video: omap: set LCD clock rate through DM API
Dario Binacchi
- [PATCH 29/31] dm: core: Guard against including dm.h in header files
Tom Rini
- [PATCH 29/31] video: omap: split the legacy code from the DM code
Dario Binacchi
- [PATCH 3/3] arm: dts: k3-am65: Update the RM resource types
Lokesh Vutla
- [PATCH 3/3] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH 3/3] binman: Build FIT image subentries with the section etype
Alper Nebi Yasak
- [PATCH 3/3] binman: Build FIT image subentries with the section etype
Simon Glass
- [PATCH 3/3] binman: Build FIT image subentries with the section etype
Alper Nebi Yasak
- [PATCH 3/3] binman: Build FIT image subentries with the section etype
Simon Glass
- [PATCH 3/3] binman: Build FIT image subentries with the section etype
Alper Nebi Yasak
- [PATCH 3/3] binman: Build FIT image subentries with the section etype
Simon Glass
- [PATCH 3/3] configs: j7200_evm_r5: Enable FS_LOADER
Suman Anna
- [PATCH 3/3] cosmetic: aspeed: Modify for SPDX-License
Ryan Chen
- [PATCH 3/3] env: ti: j721e-evm: Limit scope of rproc env variables used by R5 SPL
Suman Anna
- [PATCH 3/3] net: tftp: Fix load_block offset calculation
Ley Foon Tan
- [PATCH 3/3] riscv: Mark andes_plmt_get_count() with 'notrace'
Pragnesh Patel
- [PATCH 3/3] sh: r2dplus: Enable DM_SERIAL and DM_CLK
Marek Vasut
- [PATCH 3/3] spi: Fix typo in header
Sean Anderson
- [PATCH 3/3] treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()
Masahiro Yamada
- [PATCH 3/3] treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()
Simon Glass
- [PATCH 3/3] treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()
Simon Glass
- [PATCH 3/4] ARM: imx: Add support for reading out the primary/secondary bmode
Marek Vasut
- [PATCH 3/4] ARM: imx: Add support for reading out the primary/secondary bmode
Stefano Babic
- [PATCH 3/4] ARM: imx: Add support for reading out the primary/secondary bmode
sbabic at denx.de
- [PATCH 3/4] arm: mvebu: armada-388-gp.dts: Fix dtc warnings
Stefan Roese
- [PATCH 3/4] arm: mvebu: armada-388-gp.dts: Fix dtc warnings
Chris Packham
- [PATCH 3/4] clk: add clock driver for SCMI agents
Etienne Carriere
- [PATCH 3/4] clk: add clock driver for SCMI agents
Sudeep Holla
- [PATCH 3/4] dtoc: Add a setup script for Python
Simon Glass
- [PATCH 3/4] dtoc: Add a setup script for Python
Simon Glass
- [PATCH 3/4] test: unit test for efi_dp_check_length()
Heinrich Schuchardt
- [PATCH 3/4] xilinx: common: Check return value from variable setup
Michal Simek
- [PATCH 3/5] ARM: dts: k3-j7200-r5-common-proc-board: Enable HyperFlash
Vignesh Raghavendra
- [PATCH 3/5] arm: mvebu: Add CRS328-4C-20S-4S board
Stefan Roese
- [PATCH 3/5] arm: mvebu: Add CRS328-4C-20S-4S board
Stefan Roese
- [PATCH 3/5] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases
Pali Rohár
- [PATCH 3/5] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases
Stefan Roese
- [PATCH 3/5] board: xen: Remove CONFIG_CMD_RUN define as it is set on by default in Kconfig
Anastasiia Lukianenko
- [PATCH 3/5] board: xen: Remove CONFIG_CMD_RUN define as it is set on by default in Kconfig
Michal Simek
- [PATCH 3/5] IPQ40xx: Add reset controller support
Robert Marko
- [PATCH 3/5] PCI: mediatek: Add PCIe support for MT7622
Chuanjia Liu
- [PATCH 3/5] PCI: mediatek: Add PCIe support for MT7622
Tom Rini
- [PATCH 3/5] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH 3/6] ARM: dts: k3-j7200: Add wkup gpio node
Vignesh Raghavendra
- [PATCH 3/6] cosmetic: aspeed: ast2500: Rename board file
Chia-Wei, Wang
- [PATCH 3/6] cosmetic: aspeed: ast2500: Rename board file
Tom Rini
- [PATCH 3/6] mmc: atmel-sdhci: add sama7g5-sdhci compatibility string
Eugen Hristev
- [PATCH 3/6] riscv: load addresses for Sipeed MAIX
Heinrich Schuchardt
- [PATCH 3/6] riscv: load addresses for Sipeed MAIX
Rick Chen
- [PATCH 3/6] riscv: load addresses for Sipeed MAIX
Heinrich Schuchardt
- [PATCH 3/6] riscv: load addresses for Sipeed MAIX
Rick Chen
- [PATCH 3/6] riscv: sifive/fu540: spl: Rename soc_spl_init()
Bin Meng
- [PATCH 3/6] riscv: sifive/fu540: spl: Rename soc_spl_init()
Rick Chen
- [PATCH 3/6] riscv: sifive/fu540: spl: Rename soc_spl_init()
Pragnesh Patel
- [PATCH 3/7] libfdt: Detected out-of-space with fdt_finish()
Simon Glass
- [PATCH 3/7] rockchip: px30: Add EVB_PX30 Kconfig help
Kever Yang
- [PATCH 3/7] wdt: dw: Fix clock rate being off by 1000
Sean Anderson
- [PATCH 3/7] wdt: dw: Fix clock rate being off by 1000
Simon Glass
- [PATCH 3/8] armv8: K3: j7200: Add custom MMU support
Suman Anna
- [PATCH 3/8] xilinx: zynqmp: get chip ID using firmware driver
Michal Simek
- [PATCH 3/9] cmd: Kconfig: Change dependency for CMD_ADC
Michal Simek
- [PATCH 3/9] cmd: Kconfig: Change dependency for CMD_ADC
Tom Rini
- [PATCH 3/9] cmd: Kconfig: Change dependency for CMD_ADC
Tom Rini
- [PATCH 30/31] patman: Fix up the test comments
Tom Rini
- [PATCH 30/31] video: omap: move drivers to 'ti' directory
Dario Binacchi
- [PATCH 31/31] board: ti: am335x-ice: get CDCE913 clock device
Dario Binacchi
- [PATCH 31/31] checkpatch: Don't allow common.h and dm.h in headers
Tom Rini
- [PATCH 4/4] ARM: imx: Add support for reading out the primary/secondary bmode to MX7
Marek Vasut
- [PATCH 4/4] ARM: imx: Add support for reading out the primary/secondary bmode to MX7
Stefano Babic
- [PATCH 4/4] ARM: imx: Add support for reading out the primary/secondary bmode to MX7
sbabic at denx.de
- [PATCH 4/4] arm: mvebu: armada-3720-turris-mox.dts: Fix dtc warning
Stefan Roese
- [PATCH 4/4] binman: Add a setup script for Python
Simon Glass
- [PATCH 4/4] binman: Add a setup script for Python
Simon Glass
- [PATCH 4/4] efi_loader: validate device path length in boot manager
Heinrich Schuchardt
- [PATCH 4/4] xilinx: common: Change bootm_size variable setting
Michal Simek
- [PATCH 4/5] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH 4/5] arm: dts: mediatek: add PCIe node for MT7622
Chuanjia Liu
- [PATCH 4/5] arm: dts: mediatek: add PCIe node for MT7622
Tom Rini
- [PATCH 4/5] arm: mvebu: crs3xx-98dx3236: Add a maintainer
Stefan Roese
- [PATCH 4/5] arm: mvebu: crs3xx-98dx3236: Add a maintainer
Stefan Roese
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Pali Rohár
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Stefan Roese
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Pali Rohár
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Pali Rohár
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Pali Rohár
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Pali Rohár
- [PATCH 4/5] arm: mvebu: Espressobin: Define console env
Andre Heider
- [PATCH 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG
Anastasiia Lukianenko
- [PATCH 4/5] configs: j7200_evm_*_defconfig: Enable HyperFlash boot related configs
Vignesh Raghavendra
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Robert Marko
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Tom Rini
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Marek Vasut
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Robert Marko
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Marek Vasut
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Robert Marko
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Marek Vasut
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Robert Marko
- [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver
Marek Vasut
- [PATCH 4/6] ARM: dts: k3-j7200: Add HyperBus and HyperFlash nodes
Vignesh Raghavendra
- [PATCH 4/6] dm: sysreset: wait after reset message
Simon Glass
- [PATCH 4/6] include/configs: aspeed: Remove hardcoded variables
Chia-Wei, Wang
- [PATCH 4/6] include/configs: aspeed: Remove hardcoded variables
Tom Rini
- [PATCH 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value
Eugen Hristev
- [PATCH 4/6] riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC level
Bin Meng
- [PATCH 4/6] riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC level
Rick Chen
- [PATCH 4/6] riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC level
Pragnesh Patel
- [PATCH 4/6] stdio: Update to use compiler for Kconfig checks
Tom Rini
- [PATCH 4/6] stdio: Update to use compiler for Kconfig checks
Tom Rini
- [PATCH 4/6] stdio: Update to use compiler for Kconfig checks
Simon Glass
- [PATCH 4/6] stdio: Update to use compiler for Kconfig checks
Tom Rini
- [PATCH 4/6] stdio: Update to use compiler for Kconfig checks
Simon Glass
- [PATCH 4/7] binman: Add support for ATF BL31
Simon Glass
- [PATCH 4/7] binman: Add support for ATF BL31
Kever Yang
- [PATCH 4/7] binman: Add support for ATF BL31
Heinrich Schuchardt
- [PATCH 4/7] binman: Add support for ATF BL31
Heinrich Schuchardt
- [PATCH 4/7] binman: Add support for ATF BL31
Heinrich Schuchardt
- [PATCH 4/7] binman: Add support for ATF BL31
Simon Glass
- [PATCH 4/7] binman: Add support for ATF BL31
Heinrich Schuchardt
- [PATCH 4/7] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit
Kever Yang
- [PATCH 4/7] wdt: dw: Enable the clock before using it
Sean Anderson
- [PATCH 4/7] wdt: dw: Enable the clock before using it
Simon Glass
- [PATCH 4/8] arm: dts: k3-j7200-mcu: Add MCU domain R5F cluster node
Suman Anna
- [PATCH 4/8] xilinx: zynqmp: get chip ID at EL3
Michal Simek
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Michal Simek
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Tom Rini
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Michal Simek
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Tom Rini
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Michal Simek
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Tom Rini
- [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN
Michal Simek
- [PATCH 5/5] arm: mvebu: Espressobin: Update README.marvell file
Pali Rohár
- [PATCH 5/5] arm: mvebu: Espressobin: Update README.marvell file
Stefan Roese
- [PATCH 5/5] arm: mvebu: Update CRS305-1G-4S board flash layout
Stefan Roese
- [PATCH 5/5] arm: mvebu: Update CRS305-1G-4S board flash layout
Stefan Roese
- [PATCH 5/5] configs: j721e_evm.h: Add U-Boot image address for HyperFlash boot
Vignesh Raghavendra
- [PATCH 5/5] configs: mt7622: add PCIe controller related configs
Chuanjia Liu
- [PATCH 5/5] configs: mt7622: add PCIe controller related configs
Tom Rini
- [PATCH 5/5] dts: r64: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH 5/5] IPQ40xx: Add USB nodes
Robert Marko
- [PATCH 5/5] xen: Code style conformity
Anastasiia Lukianenko
- [PATCH 5/5] xen: Code style conformity
Tom Rini
- [PATCH 5/6] ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support
Vignesh Raghavendra
- [PATCH 5/6] configs: evb-ast2500: Move BOOTCOMMAND from header to defconfig
Chia-Wei, Wang
- [PATCH 5/6] configs: evb-ast2500: Move BOOTCOMMAND from header to defconfig
Tom Rini
- [PATCH 5/6] mmc: atmel-sdhci: enable the required generic clock
Eugen Hristev
- [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR
Bin Meng
- [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR
Leo Liang
- [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR
Rick Chen
- [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR
Pragnesh Patel
- [PATCH 5/7] binman: Support generating FITs with multiple dtbs
Simon Glass
- [PATCH 5/7] wdt: dw: Free the clock on error
Sean Anderson
- [PATCH 5/7] wdt: dw: Free the clock on error
Simon Glass
- [PATCH 5/8] arm: dts: k3-j7200-main: Add MAIN domain R5F cluster nodes
Suman Anna
- [PATCH 5/8] xilinx: zynqmp: remove chip_id function
Michal Simek
- [PATCH 5/9] cmd: Kconfig: Change dependency of CMD_USB_SDP
Michal Simek
- [PATCH 5/9] cmd: Kconfig: Change dependency of CMD_USB_SDP
Tom Rini
- [PATCH 5/9] xhci-ring.c: Add the poll_pend state to properly abort transactions
Bin Meng
- [PATCH 5/9] xhci-ring.c: Add the poll_pend state to properly abort transactions
Jason Wessel
- [PATCH 6/6] arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port
Vignesh Raghavendra
- [PATCH 6/6] configs: evb-ast2500: Convert to OF_SEPARATE
Chia-Wei, Wang
- [PATCH 6/6] configs: evb-ast2500: Convert to OF_SEPARATE
Tom Rini
- [PATCH 6/6] mmc: atmel-sdhci: use mmc_of_parse to get the DT properties
Eugen Hristev
- [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c
Bin Meng
- [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c
Leo Liang
- [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c
Rick Chen
- [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c
Pragnesh Patel
- [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c
Bin Meng
- [PATCH 6/7] riscv: Add watchdog bindings for the k210
Sean Anderson
- [PATCH 6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF
Kever Yang
- [PATCH 6/7] sunxi: Convert 64-bit boards to use binman
Simon Glass
- [PATCH 6/8] env: ti: j721e-evm: Update rproc_fw_binaries env variable for J7200
Suman Anna
- [PATCH 6/8] xilinx: zynqmp: refactor silicon name function
Michal Simek
- [PATCH 6/8] xilinx: zynqmp: refactor silicon name function
Michal Simek
- [PATCH 6/9] arc: Kconfig: Add missing DM dependency
Michal Simek
- [PATCH 6/9] arc: Kconfig: Add missing DM dependency
Simon Glass
- [PATCH 6/9] arc: Kconfig: Add missing DM dependency
Tom Rini
- [PATCH 7/7] doc: rockchip: Document Rockchip miniloader flashing
Kever Yang
- [PATCH 7/7] riscv: Enable watchdog for the k210
Sean Anderson
- [PATCH 7/7] sunxi: Drop the FIT-generator script
Simon Glass
- [PATCH 7/8] configs: j7200_evm_a72: Enable R5F remoteproc driver
Suman Anna
- [PATCH 7/8] xilinx: zynqmp: fix incorrect map not align with IPI HW
Michal Simek
- [PATCH 7/9] ARM: zynqmp: Fix SPL_DM_SPI dependencies
Michal Simek
- [PATCH 8/8] configs: j7200_evm_a72: Enhance bootcmd to start remoteprocs
Suman Anna
- [PATCH 8/8] xilinx: zynqmp: Remove one static variable
Michal Simek
- [PATCH 8/8] xilinx: zynqmp: Remove one static variable
Michal Simek
- [PATCH 8/9] cmd: Kconfig: Fix dependencies for CMD_USB_MASS_STORAGE
Michal Simek
- [PATCH 8/9] cmd: Kconfig: Fix dependencies for CMD_USB_MASS_STORAGE
Tom Rini
- [PATCH 9/9] env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4
Michal Simek
- [PATCH 9/9] env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4
Tom Rini
- [PATCH 9/9] env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4
Tom Rini
- [PATCH] acpi: device: Fix check for sequence number
Simon Glass
- [PATCH] acpi: device: Fix check for sequence number
Wolfgang Wallner
- [PATCH] arm64: a37xx: pci: Depends on DM_GPIO
Pali Rohár
- [PATCH] arm64: a37xx: pci: Depends on DM_GPIO
Stefan Roese
- [PATCH] arm64: a37xx: pci: Depends on DM_GPIO
Andre Heider
- [PATCH] arm64: a37xx: pci: Depends on DM_GPIO
Stefan Roese
- [PATCH] arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
Michal Simek
- [PATCH] arm64: Layerscape: Survive LPI one-way reset workaround
Zhiqiang Hou
- [PATCH] arm64: zynqmp: Add device tree node for 2nd mux on I2C1 bus
Michal Simek
- [PATCH] arm64: zynqmp: Correct value of shunt resistor for VCCINT and VCC_SOC
Michal Simek
- [PATCH] ARM: add Kconfig option for PSCI 0.1
Tom Rini
- [PATCH] ARM: at91: common: guard ATMEL_PIT code by ifdef
Eugen Hristev
- [PATCH] ARM: bootm: take into account gd->ram_top
Baruch Siach
- [PATCH] ARM: bootm: take into account gd->ram_top
Patrice CHOTARD
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Thirupathaiah Annapureddy
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Thirupathaiah Annapureddy
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Ryan Chen
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Thirupathaiah Annapureddy
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Tom Rini
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Thirupathaiah Annapureddy
- [PATCH] arm: dts: fix ast2500-evb inclusion for correct target
Tom Rini
- [PATCH] arm: dts: lx2160a: Add IO range
Wasim Khan
- [PATCH] arm: dts: mt7622: add PCIe nodes for BananaPi-R64
Frank Wunderlich
- [PATCH] arm: dts: mt7622: add PCIe nodes for BananaPi-R64
Tom Rini
- [PATCH] arm: dts: mt7622: add USB nodes to rfb
Frank Wunderlich
- [PATCH] ARM: dts: stm32: Adjust PLL4 settings on AV96 again
Marek Vasut
- [PATCH] ARM: dts: stm32: Pull UART4 RX high on AV96
Marek Vasut
- [PATCH] ARM: dts: stm32: Update eth1addr from EEPROM if eth1 present
Patrice CHOTARD
- [PATCH] ARM: dts: stm32: Update eth1addr from EEPROM if eth1 present
Patrice CHOTARD
- [PATCH] ARM: dts: uniphier: resync DT with Linux 5.9-rc1
Masahiro Yamada
- [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support
Stephen Carlson
- [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support
Stephen Carlson
- [PATCH] arm: imx6q: pcm058: Rework SPI NOR configuration
sbabic at denx.de
- [PATCH] arm: imx6q_logic: Enable I2C PMIC
Adam Ford
- [PATCH] arm: imx6q_logic: Enable I2C PMIC
Fabio Estevam
- [PATCH] arm: imx6q_logic: Enable I2C PMIC
Adam Ford
- [PATCH] arm: imx6q_logic: Enable I2C PMIC
Fabio Estevam
- [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Adam Ford
- [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Tom Rini
- [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Adam Ford
- [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Tom Rini
- [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Adam Ford
- [PATCH] ARM: imx: ddr: Add deskew register programming
Marek Vasut
- [PATCH] ARM: imx: ddr: Add deskew register programming
sbabic at denx.de
- [PATCH] ARM: imx: hab: panic on authentication failure
sbabic at denx.de
- [PATCH] ARM: imx: soc: Add reset for non-DM case
Marek Vasut
- [PATCH] arm: mach-k3: Clean non-coherent lines out of L3 cache
Lokesh Vutla
- [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports
Pali Rohár
- [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports
Stefan Roese
- [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports
Pali Rohár
- [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports
Stefan Roese
- [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports
Andre Heider
- [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports
Stefan Roese
- [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA
Pali Rohár
- [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA
Stefan Roese
- [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA
Andre Heider
- [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA
Stefan Roese
- [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable
Tom Rini
- [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable
Peng Fan
- [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable
Tom Rini
- [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable
Stefano Babic
- [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable
Tom Rini
- [PATCH] arm: socfpga: soc64: Document down boot_scratch_cold register usage
Siew Chin Lim
- [PATCH] arm: socfpga: soc64: Document down boot_scratch_cold register usage
Lim, Elly Siew Chin
- [PATCH] ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage its
Patrice CHOTARD
- [PATCH] ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage its
Patrice CHOTARD
- [PATCH] ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM
Patrice CHOTARD
- [PATCH] ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM
Patrice CHOTARD
- [PATCH] armv8: ls1012a: Avoid resource leak
Chaitanya Sakinam
- [PATCH] armv8: ls1012a: correction in delay implementation
Chaitanya Sakinam
- [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform
meenakshi.aggarwal at nxp.com
- [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform
Priyanka Jain
- [PATCH] Azure/Travis: Update to latest Docker image
Tom Rini
- [PATCH] Azure/Travis: Update to latest Docker image
Tom Rini
- [PATCH] bcmgenet: fix DMA buffer management
Petr Tesarik
- [PATCH] binman: Call helper function binman_set_rom_offset() to fill offset
Michal Simek
- [PATCH] binman: Call helper function binman_set_rom_offset() to fill offset
Simon Glass
- [PATCH] binman: Fix typo in kernel-doc format for binman_symname()
Michal Simek
- [PATCH] binman: Fix typo in kernel-doc format for binman_symname()
Simon Glass
- [PATCH] board/freescale/common: emc2305: Pass chip_addr to set_fan_speed()
Wasim Khan
- [PATCH] board/freescale/lsch3: Correct entry for 0.9v
Martin Kaistra
- [PATCH] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH] board: atmel: common: introduce at91_set_eth1addr for second interface
Eugen Hristev
- [PATCH] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Teresa Remmet
- [PATCH] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Tom Rini
- [PATCH] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Teresa Remmet
- [PATCH] board: tbs2910: Fix video output with existing environments
Anatolij Gustschin
- [PATCH] board: xilinx: Enable changing default DTB pick up address
Michal Simek
- [PATCH] checkpatch.pl: Make fdt / initrd relocation disabling an error
Tom Rini
- [PATCH] checkpatch.pl: Make fdt / initrd relocation disabling an error
Tom Rini
- [PATCH] clk: ccf: Add missing #include <dm/uclass.h> to clk-mux.c
Lukasz Majewski
- [PATCH] clk: versal: Move pm_query_id out of clock driver
Michal Simek
- [PATCH] cmd: bootz: fix device-tree overlap test
Tom Rini
- [PATCH] cmd: demo: Remove duplicated help message for list subcommand
Michal Simek
- [PATCH] cmd: demo: Remove duplicated help message for list subcommand
Simon Glass
- [PATCH] cmd: demo: Remove duplicated help message for list subcommand
Tom Rini
- [PATCH] cmd: fix clone coverity scan
John Chau
- [PATCH] cmd: fix clone coverity scan
Tom Rini
- [PATCH] cmd: irq: disable CMD_IRQ for riscv arch
Pragnesh Patel
- [PATCH] cmd: irq: disable CMD_IRQ for riscv arch
Heinrich Schuchardt
- [PATCH] cmd: irq: disable CMD_IRQ for riscv arch
Rick Chen
- [PATCH] cmd: irq: disable CMD_IRQ for riscv arch
Bin Meng
- [PATCH] cmd: mem: Remove already removed CONFIG_SYS_MEMTEST_SCRATCH
Michal Simek
- [PATCH] cmd: mem: Remove already removed CONFIG_SYS_MEMTEST_SCRATCH
Simon Glass
- [PATCH] cmd: mem: Remove already removed CONFIG_SYS_MEMTEST_SCRATCH
Tom Rini
- [PATCH] cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION
Stefan Roese
- [PATCH] cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION
Stefan Roese
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Bin Meng
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Rick Chen
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Bin Meng
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Atish Patra
- [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH] common: Kconfig: Add dependency for default variables strings
Michal Simek
- [PATCH] common: Kconfig: Add dependency for default variables strings
Tom Rini
- [PATCH] configs: Enable NVME support for NXP platforms
Wasim Khan
- [PATCH] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5
Ooi, Joyce
- [PATCH] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5
Marek Vasut
- [PATCH] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5
Ooi, Joyce
- [PATCH] configs: socfpga: add kernel parameter for immediate reboot
Ooi, Joyce
- [PATCH] configs: socfpga: add kernel parameter for immediate reboot
Tan, Ley Foon
- [PATCH] configs: xilinx: Enable configs required for ubifs
Michal Simek
- [PATCH] Convert CONFIG_NETCONSOLE to Kconfig
Tom Rini
- [PATCH] Convert CONFIG_NETCONSOLE to Kconfig
Tom Rini
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Rasmus Villemoes
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Stefan Roese
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Tom Rini
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
David Woodhouse
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Tom Rini
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
David Woodhouse
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
David Woodhouse
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Tom Rini
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Tom Rini
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
David Woodhouse
- [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig
Tom Rini
- [PATCH] ddr: socfpga: Fix integer overflow that caused DDR size mismatched
tien.fong.chee at intel.com
- [PATCH] ddr: socfpga: Fix integer overflow that caused DDR size mismatched
Tan, Ley Foon
- [PATCH] ddr: socfpga: stratix10: Use phys_size_t for memory size
tien.fong.chee at intel.com
- [PATCH] ddr: socfpga: stratix10: Use phys_size_t for memory size
Tan, Ley Foon
- [PATCH] ddr: socfpga: stratix10: Use phys_size_t for memory size
Tan, Ley Foon
- [PATCH] Dockerfile: Enable SH4 QEMU build
Marek Vasut
- [PATCH] Dockerfile: Enable SH4 QEMU build
Tom Rini
- [PATCH] Dockerfile: update sbsigntools to v0.9.4
Tom Rini
- [PATCH] drivers: usb: Fix config indentation
Ruben Di Battista
- [PATCH] drivers: usb: Fix config indentation
Tom Rini
- [PATCH] dt-bindings: Sync include/dt-bindings/phy/phy.h from Linux
Tom Rini
- [PATCH] efi: change usage syntax
Maxim Uvarov
- [PATCH] efi_loader: consider no-map property of reserved memory
Heinrich Schuchardt
- [PATCH] efi_loader: consider no-map property of reserved memory
Atish Patra
- [PATCH] efi_loader: log function in image loader
Heinrich Schuchardt
- [PATCH] efi_loader: variable: fix secure state initialization
AKASHI Takahiro
- [PATCH] efi_loader: variable: fix secure state initialization
Heinrich Schuchardt
- [PATCH] efi_loader: variable: keep temporary buffer during the authentication
AKASHI Takahiro
- [PATCH] env: Crash in 'env import' when using checksum and a specific size
Pedro Aguilar
- [PATCH] env: kconfig: Add default option for ARCH_ZYNQ
Michal Simek
- [PATCH] env: nowhere: Implement .load callback
Marek Vasut
- [PATCH] env: nowhere: Implement .load callback
Tom Rini
- [PATCH] fastboot: getvar: fix partition-size return value
Gary Bisson
- [PATCH] fastboot: getvar: fix partition-size return value
Lukasz Majewski
- [PATCH] fastboot: getvar: fix partition-size return value
Gary Bisson
- [PATCH] fastboot: getvar: fix partition-size return value
Lukasz Majewski
- [PATCH] fastboot: getvar: fix partition-size return value
Gary Bisson
- [PATCH] firmware: psci: Do not bind driver if U-Boot runs in EL3
Michal Simek
- [PATCH] firmware: psci: Do not bind driver if U-Boot runs in EL3
Michal Simek
- [PATCH] Fix corner case in bad block table handling.
Richard Weinberger
- [PATCH] Fix corner case in bad block table handling.
Tom Rini
- [PATCH] Fix data abort caused by mis-aligning fit data in
Tom Rini
- [PATCH] Fix data abort caused by mis-aligning fit data in
Reuben Dowle
- [PATCH] Fix data abort caused by mis-aligning fit data in
Tom Rini
- [PATCH] Fix data abort caused by mis-aligning fit data in
Reuben Dowle
- [PATCH] Fix data abort caused by mis-aligning fit data in
Tom Rini
- [PATCH] fixdep: fix coding style in previous fix
Tom Rini
- [PATCH] git-mailrc: Update email address of Maxime Ripard
Jonas Smedegaard
- [PATCH] git-mailrc: Update email address of Maxime Ripard
Maxime Ripard
- [PATCH] gpio: Add support for gpio-line-names reading
Michal Simek
- [PATCH] i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support
Heiko Schocher
- [PATCH] i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support
Heiko Schocher
- [PATCH] image: don't exceed gd->ram_top in bootm_size
Baruch Siach
- [PATCH] image: don't exceed gd->ram_top in bootm_size
Tom Rini
- [PATCH] imx8m: config: convert to bootm_size
Grygorii Tertychnyi
- [PATCH] imx8m: config: convert to bootm_size
Tom Rini
- [PATCH] imx8m: config: convert to bootm_size
sbabic at denx.de
- [PATCH] imx8m: enlarge CONFIG_SYS_BOOTM_LEN
sbabic at denx.de
- [PATCH] include: phy: fix NULL pointer check in phy_write()
Thirupathaiah Annapureddy
- [PATCH] include: phy: fix NULL pointer check in phy_write()
Michal Simek
- [PATCH] Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x
Trommel, Kees (Contractor)
- [PATCH] Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x
Heiko Schocher
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Tom Rini
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Heinrich Schuchardt
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Tom Rini
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Heinrich Schuchardt
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Tom Rini
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Simon Glass
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Tom Rini
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Heinrich Schuchardt
- [PATCH] log: Allow LOG_DEBUG to always enable log output
Tom Rini
- [PATCH] MAINTAINERS: step down as maintainer of UniPhier SoCs
Masahiro Yamada
- [PATCH] MAINTAINERS: step down as maintainer of UniPhier SoCs
Tom Rini
- [PATCH] MAINTAINERS: update clk entry git tree
Baruch Siach
- [PATCH] Makefile.lib: Build all DTS with -@ if OF_LIBFDT_OVERLAY is enabled
Tom Rini
- [PATCH] Makefile: fix annoying sunxi hack message
Frank Wunderlich
- [PATCH] Makefile: fix annoying sunxi hack message
Tom Rini
- Aw: Re: [PATCH] Makefile: fix annoying sunxi hack message
Frank Wunderlich
- Aw: Re: [PATCH] Makefile: fix annoying sunxi hack message
Frank Wunderlich
- [PATCH] Makefile: fix annoying sunxi hack message
Michal Simek
- [PATCH] Makefile: fix annoying sunxi hack message
Tom Rini
- [PATCH] Makefile: fix annoying sunxi hack message
Michal Simek
- [PATCH] Makefile: fix annoying sunxi hack message
Tom Rini
- [PATCH] Makefile: fix annoying sunxi hack message
Tom Rini
- [PATCH] Makefile: sunxi: Don't use binman to build ATF image
Simon Glass
- [PATCH] Makefile: sunxi: Don't use binman to build ATF image
André Przywara
- [PATCH] Makefile: sunxi: Don't use binman to build ATF image
Heinrich Schuchardt
- [PATCH] Makefile: sunxi: Don't use binman to build ATF image
Simon Glass
- [PATCH] Makefile: sunxi: Don't use binman to build ATF image
Tom Rini
- [PATCH] microblaze: Add support for little/big endian in/out api's
Michal Simek
- [PATCH] mips: dts: Fix PIC32MZDA GPIO register definitions and dtc warnings
John Robertson
- [PATCH] mips: dts: Fix PIC32MZDA GPIO register definitions and dtc warnings
Daniel Schwierzeck
- [PATCH] mkimage: fit: fix import of external data
Tom Rini
- [PATCH] mkimage: fit: include image cipher in configuration signature
Tom Rini
- [PATCH] mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value
Lokesh Vutla
- [PATCH] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.
haibo.chen at nxp.com
- [PATCH] mmc: pic32: PIC32MZDA SDHCI controller non-functional
John Robertson
- [PATCH] mmc: pic32: PIC32MZDA SDHCI controller non-functional
Daniel Schwierzeck
- [PATCH] mmc: pic32: PIC32MZDA SDHCI controller non-functional
Jaehoon Chung
- [PATCH] mmc: sdhci: Enable high speed conditional on the correspnding bit
Michal Simek
- [PATCH] mmc: sdhci: Enable high speed conditional on the correspnding bit
Michal Simek
- [PATCH] mmc: sdhci: Use upper/lower_32_bits macros
Michal Simek
- [PATCH] mmc: zynq: Fix default value for xlnx,mio-bank
Michal Simek
- [PATCH] mtd: nand: Fix nand write error with bad block addresses above 32-bit
Michal Simek
- [PATCH] mvebu: bubt: Drop dead code
Stefan Roese
- [PATCH] mvebu: bubt: Drop dead code
Stefan Roese
- [PATCH] net: add a generic udp protocol
Philippe Reynes
- [PATCH] net: add a generic udp protocol
Tom Rini
- [PATCH] net: add a generic udp protocol
Philippe REYNES
- [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration
Tom Rini
- [PATCH] net: ftgmac100: Add support for board specific PHY interface address
Thirupathaiah Annapureddy
- [PATCH] net: ftgmac100: Add support for board specific PHY interface address
Cédric Le Goater
- [PATCH] net: gem: Add support for more PHYs on MDIO bus
Michal Simek
- [PATCH] net: smc911x: Automatically Update ethaddr with MAC
Adam Ford
- [PATCH] net: smc911x: Automatically Update ethaddr with MAC
Tom Rini
- [PATCH] net: smc911x: Automatically Update ethaddr with MAC
Adam Ford
- [PATCH] pci: layerscape: Fix spurious writes and panic
Michael Walle
- [PATCH] pci: layerscape: Fix spurious writes and panic
Vladimir Oltean
- [PATCH] pci: layerscape: Fix spurious writes and panic
Michael Walle
- [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail
Chuanjia Liu
- Aw: [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail
Frank Wunderlich
- [PATCH] phy: marvell: a3700: add sata comphy on lane 2 with invert option
Andre Heider
- [PATCH] phy: marvell: a3700: add sata comphy on lane 2 with invert option
Pali Rohár
- [PATCH] pico-imx6: Remove unneeded CONFIG_DM_MDIO
Fabio Estevam
- [PATCH] pico-imx6: Remove unneeded CONFIG_DM_MDIO
sbabic at denx.de
- [PATCH] pinctrl: aspeed: Fix Kconfig entry indentation
Tom Rini
- [PATCH] pinctrl: mediatek: mt8512: fix the wrong start address of ranges
Chunfeng Yun
- [PATCH] pinctrl: mediatek: mt8512: fix the wrong start address of ranges
Tom Rini
- [PATCH] psci: put psci_method in .data section if EFI_LOADER is not enabled
Tom Rini
- [PATCH] ram: rockchip: Disable debug output of RAM init by default
Kever Yang
- [PATCH] ram: rockchip: Disable debug output of RAM init by default
Michael Walle
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Alex Kiernan
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Marek Vasut
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Tom Rini
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Alex Kiernan
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Alex Kiernan
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Marek Vasut
- [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"
Alex Kiernan
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Pali Rohár
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Peng Fan
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Faiz Abbas
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Pali Rohár
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Faiz Abbas
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Pali Rohár
- [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"
Pali Rohár
- [PATCH] riscv: Add do_irqinfo() for CONFIG_CMD_IRQ
Pragnesh Patel
- [PATCH] riscv: Add do_irqinfo() for CONFIG_CMD_IRQ
Heinrich Schuchardt
- [PATCH] riscv: Add do_irqinfo() for CONFIG_CMD_IRQ
Pragnesh Patel
- [PATCH] riscv: additional crash information
Sean Anderson
- [PATCH] riscv: additional crash information
Heinrich Schuchardt
- [PATCH] riscv: additional crash information
Sean Anderson
- [PATCH] riscv: load addresses for Sipeed MAIX
Heinrich Schuchardt
- [PATCH] riscv: Remove unused define in maix header
Sean Anderson
- [PATCH] riscv: Remove unused define in maix header
Heinrich Schuchardt
- [PATCH] riscv: Remove unused define in maix header
Bin Meng
- [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
Kever Yang
- [PATCH] serial: sh: Improve FIFO empty check on RX
Marek Vasut
- [PATCH] serial: uartlite: Add support to work with any endianness
Michal Simek
- [PATCH] serial: zynq: disable TX and RX while changing baud rate
Norbert Braun
- [PATCH] sh: r2dplus: Add pci enum to preboot
Marek Vasut
- [PATCH] sh: r2dplus: Enable additional PCI ethernet devices
Marek Vasut
- [PATCH] sh: r2dplus: Switch to DM ETH
Marek Vasut
- [PATCH] spi/zynqmp_gqspi.c: Use a sane timeout value in milliseconds
Mike Looijmans
- [PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2
Stefan Roese
- [PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2
Stefan Roese
- [PATCH] sun50i: a64: A64-Teres-I board detect builtin keyboard
Jonas Smedegaard
- [PATCH] sunxi: Enable ethernet on newer Olimex OLinuXino-A20-Lime2-eMMC
Jonas Smedegaard
- [PATCH] test/py: fix SquashFS tests
Joao Marcos Costa
- [PATCH] test/py: fix SquashFS tests
Tom Rini
- [PATCH] test: efi_selftest: Do not force serial# setting
Heinrich Schuchardt
- [PATCH] test: efi_selftest: Do not force serial# setting
Tom Rini
- [PATCH] test: efi_selftest: Do not force serial# setting
Heinrich Schuchardt
- [PATCH] test: efi_selftest: Do not force serial# setting
Tom Rini
- [PATCH] tests: support mkfs.ext4 without metadata_csum
Stephen Warren
- [PATCH] tests: support mkfs.ext4 without metadata_csum
Tom Rini
- [PATCH] ti: common: Remove additional i2c read for board detection
Michal Simek
- [PATCH] ti: common: Remove additional i2c read for board detection
Lokesh Vutla
- [PATCH] tools/imximage: fix DCD Blocks message output order
sbabic at denx.de
- [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options
Marek Vasut
- [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options
Marek Vasut
- [PATCH] Travis: Add squashfs-tools
Tom Rini
- [PATCH] Travis: Add squashfs-tools
Tom Rini
- [PATCH] usb: gadget: ether: Fix warnings about unused code
Lukasz Majewski
- [PATCH] usb: gadget: ether: Fix warnings about unused code
Tom Rini
- [PATCH] video: Add copy_fb_to_hw op
Frederik Aalund
- [PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs
Anatolij Gustschin
- [PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs
Soeren Moch
- [PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs
Anatolij Gustschin
- [PATCH] virtio_blk: set log2blksz correctly
AKASHI Takahiro
- [PATCH] virtio_blk: set log2blksz correctly
Bin Meng
- [PATCH] virtio_blk: set log2blksz correctly
Tom Rini
- [PATCH] x86: irq: Fix some typos
Bin Meng
- [PATCH] x86: mtrr: Fix parsing of "mtrr list" command
Wolfgang Wallner
- [PATCH] x86: mtrr: Fix parsing of "mtrr list" command
Simon Glass
- [PATCH] x86: qemu-x86_defconfig: Increase CONFIG_SYS_MALLOC_F_LEN
Stefan Roese
- [PATCH] x86: qemu-x86_defconfig: Increase CONFIG_SYS_MALLOC_F_LEN
Simon Glass
- [PATCH] xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIG
Michal Simek
- [PATCH] xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIG
Michal Simek
- [PATCH] xilinx: Change logic around zynq_board_read_rom_ethaddr()
Michal Simek
- [PATCH] xilinx: Change logic around zynq_board_read_rom_ethaddr()
Michal Simek
- [PATCH] xilinx: Check return value from variable setup
Michal Simek
- [PATCH] xilinx: Check return value from variable setup
Michal Simek
- [PATCH] xilinx: drivers: Use '_' instead of '-' in driver name
Michal Simek
- [PATCH] xilinx: drivers: Use '_' instead of '-' in driver name
Simon Glass
- [PATCH] xilinx: Enable preboot feature for ZynqMP and Versal
Michal Simek
- [PATCH] xilinx: Enable preboot feature for ZynqMP and Versal
Michal Simek
- [PATCH] xilinx: Enable uartlite driver for Versal/ZynqMP
Michal Simek
- [PATCH] xilinx: Fix xlnx,mio_bank property
Michal Simek
- [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Michal Simek
- [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Heiko Schocher
- [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Michal Simek
- [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers
Michal Simek
- [PATCH] xilinx: kconfig: Move sourcing of board Kconfig to mach folders
Michal Simek
- [PATCH] xilinx: versal: Enable i2c misc eeprom driver
Michal Simek
- [PATCH] xilinx: versal: Enable i2c misc eeprom driver
Michal Simek
- [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct
Chunfeng Yun
- Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct
Frank Wunderlich
- Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct
Marek Vasut
- Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct
Chunfeng Yun
- [PATCH RESEND v2 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.
Chunfeng Yun
- [PATCH RESEND v2 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96
Chunfeng Yun
- [PATCH RESEND v2 04/11] usb: xhci: convert to HCS_MAX_PORTS()
Chunfeng Yun
- [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()
Chunfeng Yun
- [PATCH RESEND v2 08/11] usb: xhci: convert to TRB_TX_TYPE()
Chunfeng Yun
- [PATCH RESEND v2 09/11] usb: xhci: convert to EP_TYPE()
Chunfeng Yun
- [PATCH RESEND v2 10/11] usb: xhci: use macros with parameter to fill ep_info2
Chunfeng Yun
- [PATCH RESEND v2 11/11] usb: xhci: convert to readx_poll_sleep_timeout()
Chunfeng Yun
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Marek Behún
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Stefan Roese
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Andre Heider
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Andre Heider
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Andre Heider
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Andre Heider
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Marek Behun
- [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes
Stefan Roese
- [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks
Rasmus Villemoes
- [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks
Tom Rini
- [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks
Rasmus Villemoes
- [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks
Tom Rini
- [PATCH v1 0/2] Print reset information in SPL
Chee Hong Ang
- [PATCH v1 0/3] Rename Stratix10 FPGA driver and support Agilex
Chee Hong Ang
- [PATCH v1 0/5] SoCFPGA mailbox driver fixes and enhancements
Chee Hong Ang
- [PATCH v1 0/8] mips/usb: Add Octeon xHCI USB support
Stefan Roese
- [PATCH v1 00/10] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622/mt7623
Frank Wunderlich
- [PATCH v1 00/10] mips: octeon: Add bootoctlinux command for Octeon Linux kernel booting
Stefan Roese
- [PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot
Chee Hong Ang
- [PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
- [PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot
Ang, Chee Hong
- [PATCH v1 01/10] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v1 01/10] mips: octeon: octeon-model.h: Enable inclusion from assembler files
Stefan Roese
- [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option
Andy Shevchenko
- [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option
Stefan Roese
- [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option
Park, Aiden
- [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option
Andy Shevchenko
- [PATCH v1 01/16] arm: socfpga: soc64: Remove CONFIG_OF_EMBED
Chee Hong Ang
- [PATCH v1 02/10] mips: octeon: lowlevel_init.S: Add NMI handling code for SMP Linux booting
Stefan Roese
- [PATCH v1 02/10] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCH v1 02/15] x86: advantech: som-db5800-som-6867: Remove dead code
Andy Shevchenko
- [PATCH v1 02/15] x86: advantech: som-db5800-som-6867: Remove dead code
Simon Glass
- [PATCH v1 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF
Chee Hong Ang
- [PATCH v1 03/10] mips: octeon: Add header cvmx-regs.h
Stefan Roese
- [PATCH v1 03/10] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v1 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code
Andy Shevchenko
- [PATCH v1 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code
Stefan Roese
- [PATCH v1 03/16] arm: socfpga: Add function for checking description from FIT image
Chee Hong Ang
- [PATCH v1 03/24] pci: pci-uclass: Dynamically allocate the PCI regions
Stefan Roese
- [PATCH v1 04/10] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v1 04/10] mips: octeon: Add header octeon-feature.h
Stefan Roese
- [PATCH v1 04/15] x86: coreboot: Remove dead code
Andy Shevchenko
- [PATCH v1 04/15] x86: coreboot: Remove dead code
Simon Glass
- [PATCH v1 04/16] arm: socfpga: soc64: Load FIT image with ATF support
Chee Hong Ang
- [PATCH v1 05/10] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCH v1 05/10] mips: octeon: Add header cvmx-fuse.h
Stefan Roese
- [PATCH v1 05/15] x86: dfi: dfi-bt700: Remove dead code
Andy Shevchenko
- [PATCH v1 05/15] x86: dfi: dfi-bt700: Remove dead code
Stefan Roese
- [PATCH v1 05/16] arm: socfpga: soc64: Override 'lowlevel_init' to support ATF
Chee Hong Ang
- [PATCH v1 06/10] arm: dts: add watchdog-reboot node for mt7622
Frank Wunderlich
- [PATCH v1 06/10] mips: octeon: Add header cvmx-bootinfo.h
Stefan Roese
- [PATCH v1 06/15] x86: efi: efi-x86_payload: Remove dead code
Andy Shevchenko
- [PATCH v1 06/15] x86: efi: efi-x86_payload: Remove dead code
Simon Glass
- [PATCH v1 06/16] arm: socfpga: Disable "spin-table" method for booting Linux
Chee Hong Ang
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Stefan Roese
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Simon Glass
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Stefan Roese
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Simon Glass
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Stefan Roese
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Tom Rini
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Stefan Roese
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Tom Rini
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Simon Glass
- [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions
Tom Rini
- [PATCH v1 07/10] arm: dts: add dts for Bananapi-R64
Frank Wunderlich
- [PATCH v1 07/10] mips: octeon: Add coremask support
Stefan Roese
- [PATCH v1 07/15] x86: intel: bayleybay: Remove dead code
Andy Shevchenko
- [PATCH v1 07/15] x86: intel: bayleybay: Remove dead code
Simon Glass
- [PATCH v1 07/16] arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits)
Chee Hong Ang
- [PATCH v1 08/10] dts: r64: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v1 08/10] dts: r64: add sata- and asm_sel nodes
Chunfeng Yun
- [PATCH v1 08/10] mips: octeon: Add bootmem support
Stefan Roese
- [PATCH v1 08/15] x86: intel: cherryhill: Remove dead code
Andy Shevchenko
- [PATCH v1 08/15] x86: intel: cherryhill: Remove dead code
Simon Glass
- [PATCH v1 08/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services
Chee Hong Ang
- [PATCH v1 09/10] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v1 09/10] arm: dts: mt7622: add USB nodes
Chunfeng Yun
- [PATCH v1 09/10] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v1 09/10] mips: octeon: Add bootoctlinux command
Stefan Roese
- [PATCH v1 09/15] x86: intel: cougarcanyon2: Remove dead code
Andy Shevchenko
- [PATCH v1 09/15] x86: intel: cougarcanyon2: Remove dead code
Simon Glass
- [PATCH v1 09/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver
Chee Hong Ang
- [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status
Rayagonda Kokatanur
- [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status
Simon Glass
- [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status
Rayagonda Kokatanur
- [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status
Simon Glass
- [PATCH v1 1/2] arm: socfpga: soc64: Add SDM triggered warm reset bit mask
Chee Hong Ang
- [PATCH v1 1/2] arm: socfpga: soc64: Add SDM triggered warm reset bit mask
Tan, Ley Foon
- [PATCH v1 1/2] colibri-imx8qxp: rename all occurences to colibri-imx8x
Igor Opaniuk
- [PATCH v1 1/2] drivers: pci: add api to get dma regions
Tom Rini
- [PATCH v1 1/2] x86: sipi_vector: Append appropriate suffixes
Bin Meng
- [PATCH v1 1/2] x86: sipi_vector: Append appropriate suffixes
Bin Meng
- [PATCH v1 1/3] common: ns3: add error logging support
Tom Rini
- [PATCH v1 1/3] common: ns3: add error logging support
Rayagonda Kokatanur
- [PATCH v1 1/3] fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM Mailbox
Chee Hong Ang
- [PATCH v1 1/3] fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM Mailbox
Tan, Ley Foon
- [PATCH v1 1/5] arm: socfpga: mailbox: Refactor mailbox timeout event handling
Chee Hong Ang
- [PATCH v1 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
Stefan Roese
- [PATCH v1 10/10] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH v1 10/10] arm: dts: mt7623: add USB nodes
Chunfeng Yun
- [PATCH v1 10/10] arm: dts: mt7623: add USB nodes
Chunfeng Yun
- [PATCH v1 10/10] mips: octeon: octeon_common.h: Increase CONFIG_SYS_BOOTM_LEN
Stefan Roese
- [PATCH v1 10/15] x86: intel: crownbay: Remove dead code
Andy Shevchenko
- [PATCH v1 10/15] x86: intel: crownbay: Remove dead code
Simon Glass
- [PATCH v1 10/16] net: designware: socfpga: Add ATF support for MAC driver
Chee Hong Ang
- [PATCH v1 11/15] x86: intel: edison: Remove dead code
Andy Shevchenko
- [PATCH v1 11/15] x86: intel: edison: Remove dead code
Simon Glass
- [PATCH v1 11/16] arm: socfpga: soc64: Add ATF support for Reset Manager driver
Chee Hong Ang
- [PATCH v1 12/15] x86: intel: galileo: Remove dead code
Andy Shevchenko
- [PATCH v1 12/15] x86: intel: galileo: Remove dead code
Simon Glass
- [PATCH v1 12/16] arm: socfpga: soc64: Add ATF support for FPGA reconfig driver
Chee Hong Ang
- [PATCH v1 13/15] x86: intel: minnowmax: Remove dead code
Andy Shevchenko
- [PATCH v1 13/15] x86: intel: minnowmax: Remove dead code
Simon Glass
- [PATCH v1 13/16] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()
Chee Hong Ang
- [PATCH v1 14/15] x86: intel: slimbootloader: Remove dead code
Andy Shevchenko
- [PATCH v1 14/15] x86: intel: slimbootloader: Remove dead code
Simon Glass
- [PATCH v1 14/15] x86: intel: slimbootloader: Remove dead code
Park, Aiden
- [PATCH v1 14/16] arm: socfpga: soc64: SSBL shall not setup stack on OCRAM
Chee Hong Ang
- [PATCH v1 15/15] x86: qemu: Remove dead code
Andy Shevchenko
- [PATCH v1 15/15] x86: qemu: Remove dead code
Simon Glass
- [PATCH v1 15/16] arm: socfpga: soc64: Skip handoff data access in SSBL
Chee Hong Ang
- [PATCH v1 15/24] ata: ahci: Add BAR index quirk for Cavium PCI SATA device
Stefan Roese
- [PATCH v1 16/16] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support
Chee Hong Ang
- [PATCH v1 16/24] pci: Add PCI controller driver for OcteonTX / TX2
Stefan Roese
- [PATCH v1 2/2] apalis-imx8qm: rename all occurences to apalis-imx8
Igor Opaniuk
- [PATCH v1 2/2] arm: socfpga: soc64: Show reset state in SPL
Chee Hong Ang
- [PATCH v1 2/2] arm: socfpga: soc64: Show reset state in SPL
Tan, Ley Foon
- [PATCH v1 2/2] drivers: pcie: add Broadcom IPROC PCIe RC driver
Tom Rini
- [PATCH v1 2/2] x86: call32: Append appropriate suffixes
Bin Meng
- [PATCH v1 2/2] x86: call32: Append appropriate suffixes
Bin Meng
- [PATCH v1 2/3] fpga: intel_sdm_mb: Add watchdog reset
Chee Hong Ang
- [PATCH v1 2/3] fpga: intel_sdm_mb: Add watchdog reset
Tan, Ley Foon
- [PATCH v1 2/5] arm: socfpga: mailbox: Always read mailbox responses before returning status
Chee Hong Ang
- [PATCH v1 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses on Octeon
Stefan Roese
- [PATCH v1 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses on Octeon
Daniel Schwierzeck
- [PATCH v1 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses on Octeon
Stefan Roese
- [PATCH v1 22/24] watchdog: Add reset support for OcteonTX / TX2
Stefan Roese
- [PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO
Simon Glass
- [PATCH v1 3/3] arm: socfpga: agilex: Enable FPGA Full Reconfiguration support
Chee Hong Ang
- [PATCH v1 3/3] arm: socfpga: agilex: Enable FPGA Full Reconfiguration support
Tan, Ley Foon
- [PATCH v1 3/5] arm: socfpga: mailbox: Support sending large mailbox command
Chee Hong Ang
- [PATCH v1 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Stefan Roese
- [PATCH v1 4/5] arm: socfpga: mailbox: Update mailbox response codes
Chee Hong Ang
- [PATCH v1 4/8] mips: octeon: cpu.c: Add table for selective swapping
Stefan Roese
- [PATCH v1 5/5] arm: socfpga: mailbox: Add mailbox retry support
Chee Hong Ang
- [PATCH v1 5/8] mips: octeon: Add mangle-port.h
Stefan Roese
- [PATCH v1 5/8] mips: octeon: Add mangle-port.h
Daniel Schwierzeck
- [PATCH v1 5/8] mips: octeon: Add mangle-port.h
Stefan Roese
- [PATCH v1 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()
Stefan Roese
- [PATCH v1 7/8] mips: octeon: Add USB DT nodes
Stefan Roese
- [PATCH v1 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support
Stefan Roese
- [PATCH v1 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support
Daniel Schwierzeck
- [PATCH v1 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support
Stefan Roese
- [PATCH v1] arm: socfpga: soc64: Add timeout waiting for NOC idle ACK
Chee Hong Ang
- [PATCH v1] arm: socfpga: soc64: Add timeout waiting for NOC idle ACK
Tan, Ley Foon
- [PATCH v1] arm: socfpga: soc64: Check FPGA Config status register before bridge reset
Chee Hong Ang
- [PATCH v1] arm: socfpga: soc64: Check FPGA Config status register before bridge reset
Tan, Ley Foon
- [PATCH v1] arm: socfpga: soc64: Disable CONFIG_PSCI_RESET
Chee Hong Ang
- [PATCH v1] arm: socfpga: Use DM watchdog timer
Chee Hong Ang
- [PATCH v1] arm: socfpga: Use DM watchdog timer
Tan, Ley Foon
- [PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH
sbabic at denx.de
- [PATCH v1] configs: socfpga: soc64: Avoid SPL enter infinite loop during exception
Chee Hong Ang
- [PATCH v1] configs: socfpga: soc64: Avoid SPL enter infinite loop during exception
Tan, Ley Foon
- [PATCH v1] imx: support i.MX8QM DMSSE20 a1 board
Oliver Graute
- [PATCH v1] imx: support i.MX8QM DMSSE20 a1 board
Tom Rini
- [PATCH v1] imx: support i.MX8QM DMSSE20 a1 board
Fabio Estevam
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Chee Hong Ang
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tan, Ley Foon
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tan, Ley Foon
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tan, Ley Foon
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Westergreen, Dalon
- [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tan, Ley Foon
- [PATCH v1] spi: cadence-qspi: Fix QSPI write issues
Chee Hong Ang
- [PATCH v1] spi: cadence-qspi: Fix QSPI write issues
Tan, Ley Foon
- [PATCH v1] spi: cadence-qspi: Fix QSPI write issues
Tan, Ley Foon
- [PATCH v1] spi: cadence_qspi: Probe fail if QSPI clock is not set
Chee Hong Ang
- [PATCH v1] spi: cadence_qspi: Probe fail if QSPI clock is not set
Vignesh Raghavendra
- [PATCH v1] spi: cadence_qspi: Probe fail if QSPI clock is not set
Ang, Chee Hong
- [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support
Chee Hong Ang
- [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support
Tan, Ley Foon
- [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support
Ang, Chee Hong
- [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support
Tan, Ley Foon
- [PATCH v1] test/py: Add test support for three stage boot
Liu, Yan
- [PATCH v1] test/py: Add test support for three stage boot
Tom Rini
- [PATCH v2 0/2] arm: socfpga: enable CONFIG_BOOTCOMMAND for cyclone5
Ooi, Joyce
- [PATCH v2 0/2] Enable sysreset support for SoCFPGA SoC64 platforms
Chee Hong Ang
- [PATCH v2 0/2] reset: Add a managed API
Pratyush Yadav
- [PATCH v2 0/2] reset: Add a managed API
Simon Glass
- [PATCH v2 0/3] binman: Make FIT image subentries respect offset, alignment and padding
Alper Nebi Yasak
- [PATCH v2 0/3] efi_loader: rework ResetSystem()
Heinrich Schuchardt
- [PATCH v2 0/3] Rename ASPEED SoC clock name
Ryan Chen
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Lokesh Vutla
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Jan Kiszka
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Lokesh Vutla
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Jan Kiszka
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Lokesh Vutla
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Jan Kiszka
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Lokesh Vutla
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Jan Kiszka
- [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support
Jan Kiszka
- [PATCH v2 0/4] fs/squashfs
Joao Marcos Costa
- [PATCH v2 0/4] Misc fixes/cleanup
Sean Anderson
- [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
Stefan Roese
- [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support
Marek Vasut
- [PATCH v2 0/5] add custome commands for broadcom NS3 soc
Rayagonda Kokatanur
- [PATCH v2 0/5] add SATA/AHCI support for BananaPi R64
Frank Wunderlich
- [PATCH v2 0/5] Follow up to "Add new board: Xen guest for ARM64" series
Anastasiia Lukianenko
- [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support
Heiko Schocher
- [PATCH v2 0/7] f_sdp: fix and update
Peng Fan
- [PATCH v2 0/7] riscv: Clean up timer drivers
Bin Meng
- [PATCH v2 0/8] mips/usb: Add Octeon xHCI USB support
Stefan Roese
- [PATCH v2 0/8] regmap: Add managed API, regmap fields, regmap config
Pratyush Yadav
- [PATCH v2 0/8] regmap: Add managed API, regmap fields, regmap config
Simon Glass
- [PATCH v2 0/8] stdio: Clean up stdio.c
Simon Glass
- [PATCH v2 0/8] stdio: Clean up stdio.c
Simon Glass
- [PATCH v2 0/9] mips: Add Octeon DDR4 init code
Stefan Roese
- [PATCHv2 00/10] Introduce B1x5v2 support
Sebastian Reichel
- [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210
Sean Anderson
- [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210
Eugeniy Paltsev
- [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210
Sean Anderson
- [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210
Eugeniy Paltsev
- [PATCH v2 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622/mt7623
Frank Wunderlich
- [PATCH v2 00/11] binman: Add support for generating more complex FITs
Simon Glass
- [PATCH v2 00/12] Add label to pcie nodes
Wasim Khan
- [PATCH v2 00/13] Add support for USB host and peripheral bootmodes on am65x-idk
Faiz Abbas
- [PATCH v2 00/13] Add support for USB host and peripheral bootmodes on am65x-idk
Lokesh Vutla
- [PATCH v2 00/16] x86: zboot: Enhance the 'zboot' command
Simon Glass
- [PATCH v2 00/18] Add new board: Xen guest for ARM64
Anastasiia Lukianenko
- [PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform
Lokesh Vutla
- [PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform
Lokesh Vutla
- [PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform
Lokesh Vutla
- [PATCH v2 00/21] clk: at91: add sama7g5 support
Claudiu Beznea
- [PATCH v2 00/25] arm: Introduce Marvell/Cavium OcteonTX/TX2
Stefan Roese
- [PATCH v2 00/57] dm: Add programatic generation of ACPI tables (part D)
Simon Glass
- [PATCH v2 00/57] dm: Add programatic generation of ACPI tables (part D)
Simon Glass
- [PATCHv2 01/10] bootcount: add a DM SPI flash backing store for bootcount
Sebastian Reichel
- [PATCH v2 01/10] gpio: octeon_gpio: Add GPIO controller driver for Octeon
Daniel Schwierzeck
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Sean Anderson
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Marek Vasut
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Sean Anderson
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Heinrich Schuchardt
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Sean Anderson
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Heinrich Schuchardt
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Simon Glass
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Marek Vasut
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Tom Rini
- [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*
Marek Vasut
- [PATCH v2 01/11] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v2 01/11] binman: Allow entry args to be required
Simon Glass
- [PATCH v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct
Chunfeng Yun
- [PATCH v2 01/12] configs: lx2160a: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
Wasim Khan
- [PATCH v2 01/13] spl: usb: Create an API spl_usb_load()
Faiz Abbas
- [PATCH v2 01/15] x86: Introduce USE_EARLY_BOARD_INIT option
Andy Shevchenko
- [PATCH v2 01/16] x86: Update the bootparam header
Simon Glass
- [PATCH v2 01/19] board: ti: board_detect: Add stub functions for EEPROM detection apis
Lokesh Vutla
- [PATCH v2 01/19] board: ti: board_detect: Add stub functions for EEPROM detection apis
Lokesh Vutla
- [PATCH v2 01/21] clk: check hw and hw->dev before dereference it
Claudiu Beznea
- [PATCH v2 01/21] clk: check hw and hw->dev before dereference it
Simon Glass
- [PATCH v2 01/25] fdtdec: Add API to read pci bus-range property
Stefan Roese
- [PATCH v2 01/57] x86: acpi: Add cros_ec tables
Simon Glass
- [PATCHv2 02/10] gpio: mxc_gpio: add support to read status of output gpios
Sebastian Reichel
- [PATCH v2 02/10] spi: dw: Rename "cs-gpio" to "cs-gpios"
Sean Anderson
- [PATCH v2 02/11] binman: Fix up a few missing comments
Simon Glass
- [PATCH v2 02/11] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCH v2 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.
Chunfeng Yun
- [PATCH v2 02/12] pci: layerscape: Print pcie controller number starting from 1
Wasim Khan
- [PATCH v2 02/12] pci: layerscape: Print pcie controller number starting from 1
Wasim Khan
- [PATCH v2 02/13] spl: usb: Only init usb once
Faiz Abbas
- [PATCH v2 02/15] x86: advantech: som-db5800-som-6867: Remove dead code
Andy Shevchenko
- [PATCH v2 02/16] x86: zimage: Use a state struct to hold the state
Simon Glass
- [PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN
Anastasiia Lukianenko
- [PATCH v2 02/19] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined
Lokesh Vutla
- [PATCH v2 02/21] dm: core: add support for device re-parenting
Claudiu Beznea
- [PATCH v2 02/21] dm: core: add support for device re-parenting
Simon Glass
- [PATCH v2 02/25] dm: core: Add API to read PCI bus-range property
Stefan Roese
- [PATCH v2 02/25] dm: core: Add API to read PCI bus-range property
Simon Glass
- [PATCH v2 02/57] x86: acpi: Add base asl files for common x86 devices
Simon Glass
- [PATCHv2 03/10] rtc: m41t62: reset SQW in m41t62_rtc_reset
Sebastian Reichel
- [PATCH v2 03/10] spi: dw: Use generic function to read reg address
Sean Anderson
- [PATCH v2 03/11] libfdt: Detected out-of-space with fdt_finish()
Simon Glass
- [PATCH v2 03/11] phy: mtk-tphy: make shared reg optional for v1
Frank Wunderlich
- [PATCH v2 03/11] phy: mtk-tphy: make shared reg optional for v1
Chunfeng Yun
- [PATCH v2 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96
Chunfeng Yun
- [PATCH v2 03/12] pci: ls_pcie_g4: Print pcie controller number starting from 1
Wasim Khan
- [PATCH v2 03/13] armv7R: K3: am654: Use full malloc in SPL both pre and post reloc
Faiz Abbas
- [PATCH v2 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code
Andy Shevchenko
- [PATCH v2 03/16] x86: zimage: Avoid using #ifdef
Simon Glass
- [PATCH v2 03/19] board: ti: j721e: Update fdt fixup logic for interconnect nodes
Lokesh Vutla
- [PATCH v2 03/21] clk: bind clk to new parent device
Claudiu Beznea
- [PATCH v2 03/21] clk: bind clk to new parent device
Claudiu.Beznea at microchip.com
- [PATCH v2 03/21] clk: bind clk to new parent device
Simon Glass
- [PATCH v2 03/25] pci: pci-uclass: Remove #ifdef CONFIG_NR_DRAM_BANKS as its always set
Stefan Roese
- [PATCH v2 03/57] x86: acpi: apl: Add asl files for Apollo Lake
Simon Glass
- [PATCHv2 04/10] rtc: m41t62: add oscillator fail bit reset support
Sebastian Reichel
- [PATCH v2 04/10] spi: dw: Rearrange struct dw_spi_priv
Sean Anderson
- [PATCH v2 04/11] binman: Move 'external' support into base class
Simon Glass
- [PATCH v2 04/11] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v2 04/11] reset: add basic reset controller for pciesys
Sam Shih
- Aw: Re: [PATCH v2 04/11] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v2 04/11] usb: xhci: convert to HCS_MAX_PORTS()
Chunfeng Yun
- [PATCH v2 04/12] arm: dts: lx2160a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 04/13] arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB
Faiz Abbas
- [PATCH v2 04/15] x86: coreboot: Remove dead code
Andy Shevchenko
- [PATCH v2 04/16] x86: zboot: Move kernel-version code into a function
Simon Glass
- [PATCH v2 04/18] board: Introduce xenguest_arm64 board
Anastasiia Lukianenko
- [PATCH v2 04/19] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled
Lokesh Vutla
- [PATCH v2 04/21] clk: do not disable clock if it is critical
Claudiu Beznea
- [PATCH v2 04/21] clk: do not disable clock if it is critical
Simon Glass
- [PATCH v2 04/25] ARM: renesas: Drop unnecessary function ft_board_setup()
Stefan Roese
- [PATCH v2 04/25] ARM: renesas: Drop unnecessary function ft_board_setup()
Simon Glass
- [PATCH v2 04/57] x86: acpi: Add DPTF asl files
Simon Glass
- [PATCHv2 05/10] imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
Sebastian Reichel
- [PATCH v2 05/10] spi: dw: Add SoC-specific compatible strings
Sean Anderson
- [PATCH v2 05/11] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v2 05/11] ahci: mediatek: add ahci driver
Sam Shih
- Aw: Re: [PATCH v2 05/11] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v2 05/11] binman: Add support for ATF BL31
Simon Glass
- [PATCH v2 05/11] usb: xhci: convert to TRB_TYPE()
Chunfeng Yun
- [PATCH v2 05/12] arm: dts: ls1046a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 05/13] arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config
Faiz Abbas
- [PATCH v2 05/15] x86: dfi: dfi-bt700: Remove dead code
Andy Shevchenko
- [PATCH v2 05/16] x86: zboot: Correct image type
Simon Glass
- [PATCH v2 05/19] arm: mach-k3: Move mmr_unlock to a common location
Lokesh Vutla
- [PATCH v2 05/21] clk: get clock pointer before proceeding
Claudiu Beznea
- [PATCH v2 05/21] clk: get clock pointer before proceeding
Simon Glass
- [PATCH v2 05/25] pci: pci-uclass: Dynamically allocate the PCI regions
Stefan Roese
- [PATCH v2 05/25] pci: pci-uclass: Dynamically allocate the PCI regions
Simon Glass
- [PATCH v2 05/57] x86: apl: Correct PCIE_ECAM_BASE
Simon Glass
- [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon
Daniel Schwierzeck
- [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon
Suneel Garapati
- [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon
Stefan Roese
- [PATCH v2 06/10] spi: dw: Configure ctrlr0 layout based on compatible string
Sean Anderson
- [PATCHv2 06/10] sysreset: Add poweroff-gpio driver
Sebastian Reichel
- [PATCHv2 06/10] sysreset: Add poweroff-gpio driver
Simon Glass
- [PATCH v2 06/11] binman: Support generating FITs with multiple dtbs
Simon Glass
- [PATCH v2 06/11] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCH v2 06/11] usb: xhci: convert to TRB_INTR_TARGET()
Chunfeng Yun
- [PATCH v2 06/12] arm: dts: ls2080a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes
Faiz Abbas
- [PATCH v2 06/15] x86: efi: efi-x86_payload: Remove dead code
Andy Shevchenko
- [PATCH v2 06/16] x86: zimage: Disable interrupts just before booting
Simon Glass
- [PATCH v2 06/19] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
Lokesh Vutla
- [PATCH v2 06/19] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
Suman Anna
- [PATCH v2 06/21] clk: at91: add pre-requisite headers for AT91 clock architecture
Claudiu Beznea
- [PATCH v2 06/25] pci: pci-uclass: Fix incorrect argument in map_physmem
Stefan Roese
- [PATCH v2 06/57] x86: Add a config for the systemagent PCIEX regions size
Simon Glass
- [PATCHv2 07/10] board: ge: common: rename ge_common.c to ge_rtc.c
Sebastian Reichel
- [PATCH v2 07/10] spi: dw: Document devicetree binding
Sean Anderson
- [PATCH v2 07/11] arm: dts: add watchdog-reboot node for mt7622
Frank Wunderlich
- [PATCH v2 07/11] Makefile: Support missing external blobs always
Simon Glass
- [PATCH v2 07/11] usb: xhci: convert to TRB_LEN()
Chunfeng Yun
- [PATCH v2 07/12] arm: dts: ls1088a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 07/13] arm: mach-k3: am6_init: Add support for USB boot mode
Faiz Abbas
- [PATCH v2 07/15] x86: intel: bayleybay: Remove dead code
Andy Shevchenko
- [PATCH v2 07/16] x86: zboot: Set up a sub-command structure
Simon Glass
- [PATCH v2 07/16] x86: zboot: Set up a sub-command structure
Wolfgang Wallner
- [PATCH v2 07/19] arm: mach-k3: j721e: Add detection for j721e
Lokesh Vutla
- [PATCH v2 07/21] clk: at91: pmc: add helpers for clock drivers
Claudiu Beznea
- [PATCH v2 07/25] pci: pci-uclass: Make DT subnode parse optional
Stefan Roese
- [PATCH v2 07/57] x86: Add a common global NVS structure
Simon Glass
- [PATCHv2 08/10] board: ge: common: add config option for RTC and VPD feature
Sebastian Reichel
- [PATCH v2 08/10] spi: dw: Add mem_ops
Sean Anderson
- [PATCH v2 08/10] spi: dw: Add mem_ops
Sean Anderson
- [PATCH v2 08/11] arm: dts: add dts for Bananapi-R64
Frank Wunderlich
- [PATCH v2 08/11] binman: Allow FITs to be missing binaries
Simon Glass
- [PATCH v2 08/11] usb: xhci: convert to TRB_TX_TYPE()
Chunfeng Yun
- [PATCH v2 08/12] arm: dts: ls1012a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 08/13] arm: dts: k3-am654-r5-base-board: Add USB0 nodes
Faiz Abbas
- [PATCH v2 08/15] x86: intel: cherryhill: Remove dead code
Andy Shevchenko
- [PATCH v2 08/16] x86: zboot: Add a 'go' subcommand
Simon Glass
- [PATCH v2 08/19] arm: mach-k3: j721e: Fix unlocking control module registers
Lokesh Vutla
- [PATCH v2 08/21] clk: at91: move clock code to compat.c
Claudiu Beznea
- [PATCH v2 08/25] pci: pci-uclass: Add multi entry support for memory regions
Stefan Roese
- [PATCH v2 08/25] pci: pci-uclass: Add multi entry support for memory regions
Simon Glass
- [PATCH v2 08/57] x86: acpi: Support external GNVS tables
Simon Glass
- [PATCHv2 09/10] board: ge: common: vpd: separate I2C specific code
Sebastian Reichel
- [PATCH v2 09/10] riscv: Add device tree bindings for SPI
Sean Anderson
- [PATCH v2 09/10] riscv: Add device tree bindings for SPI
Rick Chen
- [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes
Chunfeng Yun
- Aw: Re: [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes
Frank Wunderlich
- Aw: Re: [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes
Chunfeng Yun
- [PATCH v2 09/11] sunxi: Convert 64-bit boards to use binman
Simon Glass
- [PATCH v2 09/11] sunxi: Convert 64-bit boards to use binman
Heinrich Schuchardt
- [PATCH v2 09/11] sunxi: Convert 64-bit boards to use binman
Simon Glass
- [PATCH v2 09/11] usb: xhci: convert to EP_TYPE()
Chunfeng Yun
- [PATCH v2 09/12] arm: dts: ls1043a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 09/13] arm: dts: k3-am654-base-board: Add support for USB0 in SPL
Faiz Abbas
- [PATCH v2 09/15] x86: intel: cougarcanyon2: Remove dead code
Andy Shevchenko
- [PATCH v2 09/16] x86: zboot: Add an 'info' subcommand
Simon Glass
- [PATCH v2 09/19] arm: mach-k3: j7200: Add support for SOC detection
Lokesh Vutla
- [PATCH v2 09/21] clk: at91: sckc: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 09/25] pci: pci-uclass: Add support for Enhanced Allocation in Bridges
Stefan Roese
- [PATCH v2 09/57] x86: acpi: Expand the GNVS
Simon Glass
- [PATCH v2 1/1] arm: Add SPL build check to SPL early bss clear
Tom Rini
- [PATCH v2 1/1] board: ns3: check bnxt chimp handshake status
Rayagonda Kokatanur
- [PATCH v2 1/1] board: ns3: check bnxt chimp handshake status
Simon Glass
- [PATCH v2 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH v2 1/1] cmd: provide command sbi
Bin Meng
- [PATCH v2 1/1] configs: defconfig for Sipeed Maix in S-mode
Heinrich Schuchardt
- [PATCH v2 1/1] configs: defconfig for Sipeed Maix in S-mode
Bin Meng
- [PATCH v2 1/1] configs: defconfig for Sipeed Maix in S-mode
Sean Anderson
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Heinrich Schuchardt
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Marek Vasut
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Heinrich Schuchardt
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Lukasz Majewski
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Marek Vasut
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Lukasz Majewski
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Marek Vasut
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Lukasz Majewski
- [PATCH v2 1/1] dfu: remove UPDATE_TFTP
Tom Rini
- [PATCH v2 1/1] riscv: additional crash information
Heinrich Schuchardt
- [PATCH v2 1/1] riscv: additional crash information
Heinrich Schuchardt
- [PATCH v2 1/1] riscv: additional crash information
Bin Meng
- [PATCH v2 1/1] riscv: additional crash information
Rick Chen
- [PATCH v2 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Heinrich Schuchardt
- [PATCH v2 1/1] riscv: fix building with CONFIG_SPL_SMP=n
Pragnesh Patel
- [PATCH v2 1/1] timer: dw-apb: fix compiler warnings
Heinrich Schuchardt
- [PATCH v2 1/1] timer: dw-apb: fix compiler warnings
Sean Anderson
- [PATCH v2 1/1] timer: dw-apb: fix compiler warnings
Heinrich Schuchardt
- [PATCH v2 1/2] arm: socfpga: checks if FPGA is in user mode before enabling FPGA bridge
Ooi, Joyce
- [PATCH v2 1/2] net: add a generic udp protocol
Philippe Reynes
- [PATCH v2 1/2] sysreset: socfpga: soc64: Rename SYSRESET SoCFPGA driver for S10 to SoC64
Chee Hong Ang
- [PATCH v2 1/2] sysreset: socfpga: soc64: Rename SYSRESET SoCFPGA driver for S10 to SoC64
Tan, Ley Foon
- [PATCH v2 1/3] binman: Ignore hash*, signature* nodes in sections
Alper Nebi Yasak
- [PATCH v2 1/3] binman: Ignore hash*, signature* nodes in sections
Simon Glass
- [PATCH v2 1/3] configs: pico-imx6ul: convert DM_USB
sbabic at denx.de
- [PATCH v2 1/3] cosmetic: aspeed: ast2500: Rename clock header
Ryan Chen
- [PATCH v2 1/3] efi_loader: ResetSystem() should not hang
Heinrich Schuchardt
- [PATCH v2 1/3] efi_loader: ResetSystem() should not hang
Atish Patra
- [PATCH v2 1/3] fdtdec: optionally add property no-map to created reserved memory node
Patrice Chotard
- [PATCH v2 1/3] fdtdec: optionally add property no-map to created reserved memory node
Patrice CHOTARD
- [PATCH v2 1/3] fdtdec: optionally add property no-map to created reserved memory node
Rick Chen
- [PATCH v2 1/3] mkimage: fit: only process one cipher node
Tom Rini
- [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses
Pali Rohár
- [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses
Andre Heider
- [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses
Stefan Roese
- [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses
Stefan Roese
- [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses
Stefan Roese
- [PATCH v2 1/4] doc: Fix typo in FIT documentation
Sean Anderson
- [PATCH v2 1/4] firmware: add new driver for SCMI firmwares
Etienne Carriere
- [PATCH v2 1/4] firmware: add new driver for SCMI firmwares
Etienne Carriere
- [PATCH v2 1/4] firmware: add new driver for SCMI firmwares
Simon Glass
- [PATCH v2 1/4] firmware: add new driver for SCMI firmwares
Etienne Carriere
- [PATCH v2 1/4] firmware: add new driver for SCMI firmwares
Simon Glass
- [PATCH v2 1/4] fs/squashfs: add support for LZO decompression
Joao Marcos Costa
- [PATCH v2 1/4] mmc: pic32: Refresh PIC32 MMC driver
John Robertson
- [PATCH v2 1/4] mmc: pic32: Refresh PIC32 MMC driver
Daniel Schwierzeck
- [PATCH v2 1/5] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v2 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function
Anastasiia Lukianenko
- [PATCH v2 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function
Tom Rini
- [PATCH v2 1/5] cmd: broadcom: add bnxt boot command
Rayagonda Kokatanur
- [PATCH v2 1/5] cmd: broadcom: add bnxt boot command
Simon Glass
- [PATCH v2 1/5] test: Add a way to check part of a console line or skip it
Tom Rini
- [PATCH v2 1/6] ARM: mach-at91: add support for new SoC sama7g5
Eugen Hristev
- [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set
Alex Kiernan
- [PATCH v2 1/7] riscv: Rework riscv timer driver to only support S-mode
Bin Meng
- [PATCH v2 1/7] sdp: call board_usb_init at spl_sdp_load_image
Peng Fan
- [PATCH v2 1/7] sdp: call board_usb_init at spl_sdp_load_image
Lukasz Majewski
- [PATCH v2 1/7] sdp: call board_usb_init at spl_sdp_load_image
Peng Fan
- [PATCH v2 1/7] wdt: dw: Switch to using fls for log2
Sean Anderson
- [PATCH v2 1/8] moveconfig: Skip binary and ELF files
Simon Glass
- [PATCH v2 1/8] moveconfig: Skip binary and ELF files
Tom Rini
- [PATCH v2 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
Stefan Roese
- [PATCH v2 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
Bin Meng
- [PATCH v2 1/9] mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT node
Stefan Roese
- [PATCHv2 10/10] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
Sebastian Reichel
- [PATCH v2 10/10] riscv: Add support for SPI on Kendryte K210
Sean Anderson
- [PATCH v2 10/10] riscv: Add support for SPI on Kendryte K210
Heinrich Schuchardt
- [PATCH v2 10/10] riscv: Add support for SPI on Kendryte K210
Sean Anderson
- [PATCH v2 10/11] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v2 10/11] sunxi: Drop the FIT-generator script
Simon Glass
- [PATCH v2 10/11] usb: xhci: use macros with parameter to fill ep_info2
Chunfeng Yun
- [PATCH v2 10/12] arm: dts: ls1028a: add label to pcie nodes in dts
Wasim Khan
- [PATCH v2 10/13] configs: am65x_evm: Add support for DFU related configs
Faiz Abbas
- [PATCH v2 10/15] x86: intel: crownbay: Remove dead code
Andy Shevchenko
- [PATCH v2 10/16] x86: zboot: Add an 'setup' subcommand
Simon Glass
- [PATCH v2 10/19] arm: mach-k3: j7200: Add support for storing extended boot info from ROM
Lokesh Vutla
- [PATCH v2 10/21] clk: at91: clk-main: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 10/25] pci: pci-uclass: Add support for Single-Root I/O Virtualization
Stefan Roese
- [PATCH v2 10/57] x86: coral: Add ACPI tables for coral
Simon Glass
- [PATCH v2 11/11] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH v2 11/11] binman: Allow selecting default FIT configuration
Simon Glass
- [PATCH v2 11/11] usb: xhci: convert to readx_poll_sleep_timeout()
Chunfeng Yun
- [PATCH v2 11/12] pci: layerscape: Add size check for config resource
Wasim Khan
- [PATCH v2 11/13] configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes
Faiz Abbas
- [PATCH v2 11/15] x86: intel: edison: Remove dead code
Andy Shevchenko
- [PATCH v2 11/16] x86: zboot: Set environment variables for image locations
Simon Glass
- [PATCH v2 11/19] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
Lokesh Vutla
- [PATCH v2 11/21] clk: at91: sam9x60-pll: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 11/25] pci: pci-uclass: Add VF BAR map support for Enhanced Allocation
Stefan Roese
- [PATCH v2 11/57] acpi: Add support for writing a _PRW
Simon Glass
- [PATCH v2 12/12] pci: ls_pcie_g4: Add size check for config resource
Wasim Khan
- [PATCH v2 12/13] configs: Add defconfig for USB DFU bootmode
Faiz Abbas
- [PATCH v2 12/15] x86: intel: galileo: Remove dead code
Andy Shevchenko
- [PATCH v2 12/16] x86: zboot: Allow setting a separate setup base address
Simon Glass
- [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets
Vignesh Raghavendra
- [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets
Lokesh Vutla
- [PATCH v2 12/19] board: ti: j7200: Introduce support for j7200 build targets
Lokesh Vutla
- [PATCH v2 12/19] board: ti: j7200: Introduce support for j7200 build targets
Suman Anna
- [PATCH v2 12/19] board: ti: j7200: Introduce support for j7200 build targets
Suman Anna
- [PATCH v2 12/21] clk: at91: clk-master: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 12/25] pci: pci-uclass: Add support for Alternate-RoutingID capability
Stefan Roese
- [PATCH v2 12/57] acpi: Add support for conditions and return values
Simon Glass
- [PATCH v2 13/13] configs: Add new config for supporting USB mass storage boot
Faiz Abbas
- [PATCH v2 13/15] x86: intel: minnowmax: Remove dead code
Andy Shevchenko
- [PATCH v2 13/16] x86: zboot: Add an option to dump the setup information
Simon Glass
- [PATCH v2 13/19] board: ti: j7200: Add board detection support for j7200
Lokesh Vutla
- [PATCH v2 13/21] clk: at91: clk-master: add support for sama7g5
Claudiu Beznea
- [PATCH v2 13/25] pci: pci-uclass: Check validity of ofnode
Stefan Roese
- [PATCH v2 13/57] acpi: Support generating a multi-function _DSM for devices
Simon Glass
- [PATCH v2 14/15] x86: intel: slimbootloader: Remove dead code
Andy Shevchenko
- [PATCH v2 14/16] x86: zboot: Allow overriding the command line
Simon Glass
- [PATCH v2 14/19] ram: k3-j721e: Relax version checks for memory controller
Lokesh Vutla
- [PATCH v2 14/21] clk: at91: clk-utmi: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 14/25] arm: include/asm/io.h: Add 64bit clrbits and setbits helpers
Stefan Roese
- [PATCH v2 14/57] dm: acpi: Use correct GPIO polarity type in acpi_dp_add_gpio()
Simon Glass
- [PATCH v2 15/15] x86: qemu: Remove dead code
Andy Shevchenko
- [PATCH v2 15/16] cros: Update chromium documentation
Simon Glass
- [PATCH v2 15/18] arm: dts: k3-j7200: Add dts support
Vignesh Raghavendra
- [PATCH v2 15/19] soc: soc_ti_k3: Add device identification for J7200 SoC
Lokesh Vutla
- [PATCH v2 15/19] soc: soc_ti_k3: Add device identification for J7200 SoC
Suman Anna
- [PATCH v2 15/21] clk: at91: clk-utmi: add support for sama7g5
Claudiu Beznea
- [PATCH v2 15/25] arm: octeontx: Add headers for OcteonTX
Stefan Roese
- [PATCH v2 15/57] x86: link: Allow more space for U-Boot
Simon Glass
- [PATCH v2 16/16] cros: Add information about booting Chrome OS on x86
Simon Glass
- [PATCH v2 16/19] arm: dts: k3-j7200: Add dts support
Lokesh Vutla
- [PATCH v2 16/21] clk: at91: clk-programmable: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 16/25] arm: octeontx2: Add headers for OcteonTX2
Stefan Roese
- [PATCH v2 16/57] i2c: Add a generic driver to generate ACPI info
Simon Glass
- [PATCH v2 16/57] i2c: Add a generic driver to generate ACPI info
Heiko Schocher
- [PATCH v2 16/57] i2c: Add a generic driver to generate ACPI info
Andy Shevchenko
- [PATCH v2 17/19] arm: dts: k3-j7200: Add R5 specific dts support
Lokesh Vutla
- [PATCH v2 17/21] clk: at91: clk-system: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 17/25] ata: ahci: Add BAR index quirk for Cavium PCI SATA device
Stefan Roese
- [PATCH v2 17/57] x86: Add wake sources for the acpi_gpe driver
Simon Glass
- [PATCH v2 18/18] configs: j7200_evm_a72: Add Initial support
Vignesh Raghavendra
- [PATCH v2 18/19] configs: j7200_evm_r5: Add initial support
Lokesh Vutla
- [PATCH v2 18/19] configs: j7200_evm_r5: Add initial support
Vignesh Raghavendra
- [PATCH v2 18/21] clk: at91: clk-peripheral: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 18/25] pci: Add PCI controller driver for OcteonTX / TX2
Stefan Roese
- [PATCH v2 18/57] x86: apl: Support writing the IntelGraphicsMem table
Simon Glass
- [PATCH v2 19/19] configs: j7200_evm_a72: Add Initial support
Lokesh Vutla
- [PATCH v2 19/19] configs: j7200_evm_a72: Add Initial support
Suman Anna
- [PATCH v2 19/21] clk: at91: clk-generic: add driver compatible with ccf
Claudiu Beznea
- [PATCH v2 19/25] mmc: Add MMC controller driver for OcteonTX / TX2
Stefan Roese
- [PATCH v2 19/57] x86: acpi: Add a common routine to write WiFi info
Simon Glass
- [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC
Andre Heider
- [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC
Pali Rohár
- [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC
Andre Heider
- [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC
Pali Rohár
- [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC
Andre Heider
- [PATCH v2 2/2] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5
Ooi, Joyce
- [PATCH v2 2/2] sandbox: enable support of generic udp protocol
Philippe Reynes
- [PATCH v2 2/2] sysreset: socfpga: agilex: Enable sysreset support
Chee Hong Ang
- [PATCH v2 2/2] sysreset: socfpga: agilex: Enable sysreset support
Tan, Ley Foon
- [PATCH v2 2/3] binman: Respect pad-before property of section subentries
Alper Nebi Yasak
- [PATCH v2 2/3] binman: Respect pad-before property of section subentries
Simon Glass
- [PATCH v2 2/3] clock:aspeed: Sync with Linux kernel clock header define
Ryan Chen
- [PATCH v2 2/3] configs: pico-imx6ul: convert DM_VIDEO
sbabic at denx.de
- [PATCH v2 2/3] efi_selftest: add a test for ResetSystem()
Heinrich Schuchardt
- [PATCH v2 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering
Tom Rini
- [PATCH v2 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter
Patrice Chotard
- [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr
Pali Rohár
- [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr
Stefan Roese
- [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr
Andre Heider
- [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr
Stefan Roese
- [PATCH v2 2/4] dt-bindings: arm: SCMI bindings documentation
Etienne Carriere
- [PATCH v2 2/4] fs/squashfs: add support for ZSTD decompression
Joao Marcos Costa
- [PATCH v2 2/4] mmc: pic32: Refresh PIC32 MMC driver
John Robertson
- [PATCH v2 2/4] spi: Remove uses of #ifndef __U_BOOT__ from spi-mem.c
Sean Anderson
- [PATCH v2 2/5] cmd: broadcom: add cmd to update bnxt image env variables
Rayagonda Kokatanur
- [PATCH v2 2/5] console: Always define the console-recording functions
Tom Rini
- [PATCH v2 2/5] MAINTAINERS: Add maintainers to XEN section
Anastasiia Lukianenko
- [PATCH v2 2/5] MAINTAINERS: Add maintainers to XEN section
Simon Glass
- [PATCH v2 2/5] MAINTAINERS: Add maintainers to XEN section
Tom Rini
- [PATCH v2 2/5] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCH v2 2/5] phy: mtk-tphy: add PHY_TYPE_SATA
Chunfeng Yun
- [PATCH v2 2/6] pinctrl: at91-pio4: add compatible for sama7g5 pinctrl block
Eugen Hristev
- [PATCH v2 2/7] f_sdp: Add high speed endpoint descriptor
Peng Fan
- [PATCH v2 2/7] f_sdp: Add high speed endpoint descriptor
Lukasz Majewski
- [PATCH v2 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver
Bin Meng
- [PATCH v2 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver
Sean Anderson
- [PATCH v2 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if
Sean Anderson
- [PATCH v2 2/8] Convert CONFIG_SPLASH_SCREEN et al to Kconfig
Simon Glass
- [PATCH v2 2/8] Convert CONFIG_SPLASH_SCREEN et al to Kconfig
Tom Rini
- [PATCH v2 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Stefan Roese
- [PATCH v2 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Bin Meng
- [PATCH v2 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Stefan Roese
- [PATCH v2 2/9] mips: octeon: Add octeon-model.h header
Stefan Roese
- [PATCH v2 2/9] mips: octeon: Add octeon-model.h header
Daniel Schwierzeck
- [PATCH v2 2/9] mips: octeon: Add octeon-model.h header
Stefan Roese
- [PATCH v2 20/21] clk: at91: pmc: add generic clock ops
Claudiu Beznea
- [PATCH v2 20/25] mtd: nand: Add NAND controller driver for OcteonTX
Stefan Roese
- [PATCH v2 20/57] x86: Add some definitions for SMM
Simon Glass
- [PATCH v2 21/21] clk: at91: sama7g5: add clock support
Claudiu Beznea
- [PATCH v2 21/25] net: Add NIC controller driver for OcteonTX
Stefan Roese
- [PATCH v2 21/57] x86: apl: Add power-management definitions
Simon Glass
- [PATCH v2 22/25] net: Add NIC controller driver for OcteonTX2
Stefan Roese
- [PATCH v2 22/57] x86: apl: Update iomap for ACPI
Simon Glass
- [PATCH v2 23/25] watchdog: Add reset support for OcteonTX / TX2
Stefan Roese
- [PATCH v2 23/57] x86: Add a few common Intel CPU functions
Simon Glass
- [PATCH v2 24/25] arm: octeontx: Add support for OcteonTX SoC platforms
Stefan Roese
- [PATCH v2 24/57] x86: acpi: Support generation of the HPET table
Simon Glass
- [PATCH v2 25/25] arm: octeontx2: Add support for OcteonTX2 SoC platforms
Stefan Roese
- [PATCH v2 25/57] x86: acpi: Support generation of the DBG2 table
Simon Glass
- [PATCH v2 26/57] acpi: Add support for generating processor tables
Simon Glass
- [PATCH v2 27/57] x86: acpi: Add PCT and PTC tables
Simon Glass
- [PATCH v2 28/57] acpi: Add more support for generating processor tables
Simon Glass
- [PATCH v2 29/57] x86: acpi: Add common Intel ACPI tables
Simon Glass
- [PATCH v2 3/3] binman: Build FIT image subentries with the section etype
Alper Nebi Yasak
- [PATCH v2 3/3] binman: Build FIT image subentries with the section etype
Simon Glass
- [PATCH v2 3/3] cosmetic: aspeed: Modify for SPDX-License
Ryan Chen
- [PATCH v2 3/3] doc: verified-boot: add required-mode information
Thirupathaiah Annapureddy
- [PATCH v2 3/3] doc: verified-boot: add required-mode information
Simon Glass
- [PATCH v2 3/3] efi_selftest: substitute ResetSystem() by do_reset()
Heinrich Schuchardt
- [PATCH v2 3/3] mkimage: fit: don't cipher ciphered data
Tom Rini
- [PATCH v2 3/3] optee: add property no-map to secure reserved memory
Patrice Chotard
- [PATCH v2 3/3] pico-imx6ul: convert ethernet function to DM_ETH
sbabic at denx.de
- [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases
Pali Rohár
- [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases
Stefan Roese
- [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases
Andre Heider
- [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases
Stefan Roese
- [PATCH v2 3/4] clk: add clock driver for SCMI agents
Etienne Carriere
- [PATCH v2 3/4] clk: add clock driver for SCMI agents
Simon Glass
- [PATCH v2 3/4] fs/squashfs: Add init. and clean-up functions to decompression
Joao Marcos Costa
- [PATCH v2 3/4] mmc: pic32: Refresh PIC32 MMC driver
John Robertson
- [PATCH v2 3/4] spi: Remove some instances of EXPORT_SYMBOL_GPL
Sean Anderson
- [PATCH v2 3/5] board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig
Anastasiia Lukianenko
- [PATCH v2 3/5] board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig
Simon Glass
- [PATCH v2 3/5] board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig
Tom Rini
- [PATCH v2 3/5] cmd: broadcom: add command for chimp handshake
Rayagonda Kokatanur
- [PATCH v2 3/5] dm: Rename DM test flags to make them more generic
Tom Rini
- [PATCH v2 3/5] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v2 3/6] mmc: atmel-sdhci: add sama7g5-sdhci compatibility string
Eugen Hristev
- [PATCH v2 3/6] mmc: atmel-sdhci: add sama7g5-sdhci compatibility string
Peng Fan
- [PATCH v2 3/7] f_sdp: Fix wrong usb request size
Peng Fan
- [PATCH v2 3/7] f_sdp: Fix wrong usb request size
Lukasz Majewski
- [PATCH v2 3/7] riscv: Clean up initialization in Andes PLIC
Bin Meng
- [PATCH v2 3/7] wdt: dw: Fix clock rate being off by 1000
Sean Anderson
- [PATCH v2 3/8] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig
Simon Glass
- [PATCH v2 3/8] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig
Tom Rini
- [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Stefan Roese
- [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Bin Meng
- [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Stefan Roese
- [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Bin Meng
- [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Stefan Roese
- [PATCH v2 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header
Stefan Roese
- [PATCH v2 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header
Daniel Schwierzeck
- [PATCH v2 30/57] x86: Support Atom SoCs using SWSMISCI rather than the SWSCI
Simon Glass
- [PATCH v2 31/57] x86: acpi: Add support for additional Intel tables
Simon Glass
- [PATCH v2 32/57] x86: apl: Allow reading hostbridge base addresses
Simon Glass
- [PATCH v2 33/57] p2sb: Add some definitions used for ACPI
Simon Glass
- [PATCH v2 34/57] x86: apl: Generate required ACPI tables
Simon Glass
- [PATCH v2 35/57] x86: apl: Add support for hostbridge ACPI generation
Simon Glass
- [PATCH v2 36/57] x86: apl: Generate CPU tables
Simon Glass
- [PATCH v2 37/57] x86: apl: Generate ACPI table for LPC
Simon Glass
- [PATCH v2 38/57] x86: apl: Drop unnecessary code in PMC driver
Simon Glass
- [PATCH v2 39/57] tpm: cr50: Add ACPI support
Simon Glass
- [PATCH v2 4/4] arm: mvebu: Espressobin: Update README.marvell file
Pali Rohár
- [PATCH v2 4/4] arm: mvebu: Espressobin: Update README.marvell file
Stefan Roese
- [PATCH v2 4/4] arm: mvebu: Espressobin: Update README.marvell file
Stefan Roese
- [PATCH v2 4/4] mmc: pic32: Refresh PIC32 MMC driver
John Robertson
- [PATCH v2 4/4] mmc: pic32: Refresh PIC32 MMC driver
Daniel Schwierzeck
- [PATCH v2 4/4] reset: add reset controller driver for SCMI agents
Etienne Carriere
- [PATCH v2 4/4] reset: add reset controller driver for SCMI agents
Simon Glass
- [PATCH v2 4/4] spi: Fix typo in header
Sean Anderson
- [PATCH v2 4/4] test/py: Add tests for LZO and ZSTD
Joao Marcos Costa
- [PATCH v2 4/5] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v2 4/5] ahci: mediatek: add ahci driver
Chunfeng Yun
- Aw: Re: [PATCH v2 4/5] ahci: mediatek: add ahci driver
Frank Wunderlich
- Aw: Re: [PATCH v2 4/5] ahci: mediatek: add ahci driver
Chunfeng Yun
- [PATCH v2 4/5] board: ns3: kconfig: extend board kconfig with specific commands
Rayagonda Kokatanur
- [PATCH v2 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG
Anastasiia Lukianenko
- [PATCH v2 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG
Simon Glass
- [PATCH v2 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG
Tom Rini
- [PATCH v2 4/5] test: Add a flag for tests that need console recording
Tom Rini
- [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value
Eugen Hristev
- [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value
Eugen Hristev
- [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value
Peng Fan
- [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image
Peng Fan
- [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image
Lukasz Majewski
- [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image
Peng Fan
- [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image
Lukasz Majewski
- [PATCH v2 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver
Bin Meng
- [PATCH v2 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver
Sean Anderson
- [PATCH v2 4/7] wdt: dw: Enable the clock before using it
Sean Anderson
- [PATCH v2 4/8] mips: octeon: cpu.c: Add table for selective swapping
Stefan Roese
- [PATCH v2 4/8] stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV
Simon Glass
- [PATCH v2 4/8] stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV
Tom Rini
- [PATCH v2 4/9] mips: octeon: Add octeon_ddr.h header
Stefan Roese
- [PATCH v2 4/9] mips: octeon: Add octeon_ddr.h header
Daniel Schwierzeck
- [PATCH v2 4/9] mips: octeon: Add octeon_ddr.h header
Stefan Roese
- [PATCH v2 40/57] x86: fsp: Update the FSP API with the end-firmware method
Simon Glass
- [PATCH v2 41/57] x86: cpu: Report address width from cpu_get_info()
Simon Glass
- [PATCH v2 42/57] x86: Sort the MTRR table
Simon Glass
- [PATCH v2 43/57] x86: Notify the FSP of the 'end firmware' event
Simon Glass
- [PATCH v2 44/57] x86: Correct the assembly guard in e820.h
Simon Glass
- [PATCH v2 45/57] x86: Add a header guard to asm/acpi_table.h
Simon Glass
- [PATCH v2 46/57] x86: Correct handling of MADT table CPUs
Simon Glass
- [PATCH v2 47/57] acpi: tpm: Add a TPM2 table
Simon Glass
- [PATCH v2 48/57] acpi: tpm: Add a TPM1 table
Simon Glass
- [PATCH v2 49/57] x86: acpi: Set the log category for x86 table generation
Simon Glass
- [PATCH v2 5/5] cmd: Update the memory-search command
Tom Rini
- [PATCH v2 5/5] dts: r64: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v2 5/5] MAINTAINERS: update maintainers file for new files
Rayagonda Kokatanur
- [PATCH v2 5/5] MAINTAINERS: update maintainers file for new files
Simon Glass
- [PATCH v2 5/5] xen: Code style conformity
Anastasiia Lukianenko
- [PATCH v2 5/5] xen: Code style conformity
Simon Glass
- [PATCH v2 5/5] xen: Code style conformity
Tom Rini
- [PATCH v2 5/6] mmc: atmel-sdhci: enable the required generic clock
Eugen Hristev
- [PATCH v2 5/6] mmc: atmel-sdhci: enable the required generic clock
Peng Fan
- [PATCH v2 5/7] spl: add g_dnl_get_board_bcd_device_number
Peng Fan
- [PATCH v2 5/7] spl: add g_dnl_get_board_bcd_device_number
Lukasz Majewski
- [PATCH v2 5/7] wdt: dw: Free the clock on error
Sean Anderson
- [PATCH v2 5/8] mips: octeon: Add mangle-port.h
Stefan Roese
- [PATCH v2 5/8] stdio: Drop #ifdefs in the header file
Simon Glass
- [PATCH v2 5/8] stdio: Drop #ifdefs in the header file
Tom Rini
- [PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)
Stefan Roese
- [PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)
Daniel Schwierzeck
- [PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)
Stefan Roese
- [PATCH v2 50/57] x86: coral: Add audio descriptor files
Simon Glass
- [PATCH v2 51/57] x86: apl: Check low-level init in FSP-S pre-init
Simon Glass
- [PATCH v2 52/57] x86: fsp: Add more debugging for silicon init
Simon Glass
- [PATCH v2 53/57] x86: fsp: Show FSP-S or FSP-M address in fsp_get_header()
Simon Glass
- [PATCH v2 54/57] acpi: Use defines for field lengths
Simon Glass
- [PATCH v2 55/57] x86: Add a way to add to the e820 memory table
Simon Glass
- [PATCH v2 56/57] x86: Move include of bitops out of ACPI region
Simon Glass
- [PATCH v2 57/57] x86: coral: Update config and device tree for ACPI
Simon Glass
- [PATCH v2 6/6] mmc: atmel-sdhci: use mmc_of_parse to get the DT properties
Eugen Hristev
- [PATCH v2 6/6] mmc: atmel-sdhci: use mmc_of_parse to get the DT properties
Peng Fan
- [PATCH v2 6/7] f_sdp: Add EP1_OUT as default data receive pipe in sdp
Peng Fan
- [PATCH v2 6/7] riscv: Add watchdog bindings for the k210
Sean Anderson
- [PATCH v2 6/7] riscv: Add watchdog bindings for the k210
Rick Chen
- [PATCH v2 6/7] riscv: Update Kendryte device tree for new CLINT driver
Bin Meng
- [PATCH v2 6/7] riscv: Update Kendryte device tree for new CLINT driver
Sean Anderson
- [PATCH v2 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()
Stefan Roese
- [PATCH v2 6/8] stdio: Update to use compiler for Kconfig checks
Simon Glass
- [PATCH v2 6/8] stdio: Update to use compiler for Kconfig checks
Tom Rini
- [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)
Stefan Roese
- [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)
Daniel Schwierzeck
- [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)
Stefan Roese
- [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)
Stefan Roese
- [PATCH v2 7/7] f_sdp: Change bInterval of interrupt endpoint to 3
Peng Fan
- [PATCH v2 7/7] riscv: Enable watchdog for the k210
Sean Anderson
- [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver
Bin Meng
- [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver
Sean Anderson
- [PATCH v2 7/8] mips: octeon: Add USB DT nodes
Stefan Roese
- [PATCH v2 7/8] mips: octeon: Add USB DT nodes
Bin Meng
- [PATCH v2 7/8] mips: octeon: Add USB DT nodes
Stefan Roese
- [PATCH v2 7/8] stdio: Drop brackets around &devs.list
Simon Glass
- [PATCH v2 7/8] stdio: Drop brackets around &devs.list
Tom Rini
- [PATCH v2 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)
Stefan Roese
- [PATCH v2 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)
Daniel Schwierzeck
- [PATCH v2 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)
Stefan Roese
- [PATCH v2 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support
Stefan Roese
- [PATCH v2 8/8] stdio: Tidy up the coding style
Simon Glass
- [PATCH v2 8/8] stdio: Tidy up the coding style
Tom Rini
- [PATCH v2 8/8] test: dm: Add tests for regmap managed API and regmap fields
Tom Rini
- [PATCH v2 8/9] mips: octeon: dram.c: Add RAM driver support
Stefan Roese
- [PATCH v2 9/9] mips: octeon: octeon_ebb7304: Add DDR4 support
Stefan Roese
- [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Adam Ford
- [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Tom Rini
- [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
Fabio Estevam
- [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address
sbabic at denx.de
- [PATCH v2] arm: socfpga: soc64: Check FPGA Config status register before bridge reset
Chee Hong Ang
- [PATCH v2] arm: socfpga: soc64: Check FPGA Config status register before bridge reset
Tan, Ley Foon
- [PATCH v2] arm: socfpga: soc64: Document down boot_scratch_cold register usage
Siew Chin Lim
- [PATCH v2] arm: socfpga: soc64: Document down boot_scratch_cold register usage
Tan, Ley Foon
- [PATCH v2] arm: socfpga: Use DM watchdog timer
Chee Hong Ang
- [PATCH v2] arm: socfpga: Use DM watchdog timer
Tan, Ley Foon
- [PATCH v2] armv8: layerscape: don't remove crypto node if just partially disabled
Michael Walle
- [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable
Marek Bykowski
- [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable
Tom Rini
- [PATCH v2] board/freescale: emc2305: Pass chip_addr emc2305_init() and set_fan_speed()
Wasim Khan
- [PATCH v2] board: Add support for iMX8QXP AI_ML board
Stefano Babic
- [PATCH v2] board: Add support for iMX8QXP AI_ML board
Stefano Babic
- [PATCH v2] board: Add support for iMX8QXP AI_ML board
Stefano Babic
- [PATCH v2] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH v2] board: armltd: Add support for Total Compute platform
Tom Rini
- [PATCH v2] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH v2] board: freescale: emc2305: Pass chip_addr to set_fan_speed
Wasim Khan
- [PATCH v2] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support
Teresa Remmet
- [PATCH v2] board: ti: am65x: Update fdt fixup logic for interconnect nodes
Lokesh Vutla
- [PATCH v2] cmd: exception: unaligned data access on RISC-V
Heinrich Schuchardt
- [PATCH v2] cmd: exception: unaligned data access on RISC-V
Rick Chen
- [PATCH v2] cmd: exception: unaligned data access on RISC-V
Heinrich Schuchardt
- [PATCH v2] cmd: exception: unaligned data access on RISC-V
Rick Chen
- [PATCH v2] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH v2] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Rick Chen
- [PATCH v2] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH v2] common: Kconfig: Add dependency for default variables strings
Michal Simek
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Tom Rini
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Tom Rini
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Tom Rini
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Daniel Schwierzeck
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Simon Glass
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v2] configs: Enable NVME support for Layerscape platforms
Wasim Khan
- [PATCH v2] configs: socfpga: add kernel parameter for immediate reboot
Ooi, Joyce
- [PATCH v2] configs: socfpga: add kernel parameter for immediate reboot
Tan, Ley Foon
- [PATCH v2] configs: socfpga: add kernel parameter for immediate reboot
Simon Goldschmidt
- [PATCH V2] dm: core: Add late driver remove option
Marek Vasut
- [PATCH V2] dm: core: Add late driver remove option
Simon Glass
- [PATCH V2] dm: core: Add late driver remove option
Marek Vasut
- [PATCH V2] dm: core: Add late driver remove option
Simon Glass
- [PATCH V2] dm: core: Add late driver remove option
Stefan Roese
- [PATCH V2] dm: core: Add late driver remove option
Simon Glass
- [PATCH v2] dtoc: add coverage test for unicode error
Simon Glass
- [PATCH v2] fastboot: getvar: fix partition-size return value
Gary Bisson
- [PATCH v2] firmware: psci: Do not bind driver if U-Boot runs in EL3
Michal Simek
- [PATCH v2] fit_image: Use calloc() to fix reproducibility issue
Tom Rini
- [PATCH v2] imx: Add MYiR Tech MYS-6ULX support
sbabic at denx.de
- [PATCHv2] lmb/bdinfo: dump lmb info via bdinfo
Tom Rini
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Chee Hong Ang
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Ang, Chee Hong
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tom Rini
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Marek Vasut
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tom Rini
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Simon Goldschmidt
- [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images
Tom Rini
- [PATCH v2] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.
haibo.chen at nxp.com
- [PATCH v2] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.
Peng Fan
- [PATCH v2] net: ping: reset stored IP address
Tom Rini
- [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC
Adam Ford
- [PATCH v2] scripts/setlocalversion: sync with linux 5.8
Rasmus Villemoes
- [PATCH v2] scripts/setlocalversion: sync with linux 5.8
Tom Rini
- [PATCH v2 RESEND 06/11] usb: xhci: convert to TRB_INTR_TARGET()
Chunfeng Yun
- [PATCH v2 RESEND 07/11] usb: xhci: convert to TRB_LEN()
Chunfeng Yun
- [PATCH v3 0/3] Add support for multiple required keys
Thirupathaiah Annapureddy
- [PATCH v3 0/4] fs/squashfs: Add new decompression algorithms
Joao Marcos Costa
- [PATCH v3 0/4] Support for specifying extra IOMMU mappings for PCI
laurentiu.tudor at nxp.com
- [PATCH v3 0/5] add SATA/AHCI support for BananaPi R64
Frank Wunderlich
- [PATCH v3 0/8] mips/usb: Add Octeon xHCI USB support
Stefan Roese
- [PATCHv3 00/10] Introduce B1x5v2 support
Sebastian Reichel
- [PATCH v3 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>
Frank Wunderlich
- [PATCHv3 01/10] bootcount: add a DM SPI flash backing store for bootcount
Sebastian Reichel
- [PATCH v3 01/11] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCHv3 02/10] gpio: mxc_gpio: add support to read status of output gpios
Sebastian Reichel
- [PATCHv3 02/10] gpio: mxc_gpio: add support to read status of output gpios
Fabio Estevam
- [PATCH v3 02/11] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCHv3 03/10] rtc: m41t62: reset SQW in m41t62_rtc_reset
Sebastian Reichel
- [PATCH v3 03/10] x86: apl: Set the correct boot mode in the FSP-M code
Simon Glass
- [PATCH v3 03/11] phy: mtk-tphy: make shared reg optional for v1
Frank Wunderlich
- [PATCHv3 04/10] rtc: m41t62: add oscillator fail bit reset support
Sebastian Reichel
- [PATCH v3 04/11] reset: add basic reset controller for pciesys
Frank Wunderlich
- Aw: [PATCH v3 04/11] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCHv3 05/10] imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL
Sebastian Reichel
- [PATCH v3 05/11] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCHv3 06/10] sysreset: Add poweroff-gpio driver
Sebastian Reichel
- [PATCH v3 06/11] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCHv3 07/10] board: ge: common: rename ge_common.c to ge_rtc.c
Sebastian Reichel
- [PATCH v3 07/11] arm: dts: add watchdog-reboot node for mt7622
Frank Wunderlich
- [PATCHv3 08/10] board: ge: common: add config option for RTC and VPD feature
Sebastian Reichel
- [PATCH v3 08/11] arm: dts: add dts for Bananapi-R64
Frank Wunderlich
- [PATCHv3 09/10] board: ge: common: vpd: separate I2C specific code
Sebastian Reichel
- [PATCH v3 09/11] arm: dts: mt7622: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN
Heinrich Schuchardt
- [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN
Simon Glass
- [PATCH v3 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH v3 1/1] cmd: provide command sbi
Atish Patra
- [PATCH v3 1/1] cmd: provide command sbi
Bin Meng
- [PATCH v3 1/1] Makefile: socfpga: Generate sfp file with 4 SPL images
Chee Hong Ang
- [PATCH v3 1/1] Makefile: socfpga: Generate sfp file with 4 SPL images
Tan, Ley Foon
- [PATCH v3 1/3] fdtdec: optionally add property no-map to created reserved memory node
Patrice Chotard
- [PATCH v3 1/3] fdtdec: optionally add property no-map to created reserved memory node
Heinrich Schuchardt
- [PATCH v3 1/3] vboot: add DTB policy for supporting multiple required conf keys
Thirupathaiah Annapureddy
- [PATCH v3 1/4] fs/squashfs: Add init. and clean-up functions to decompression
Joao Marcos Costa
- [PATCH v3 1/4] fs/squashfs: Add init. and clean-up functions to decompression
Thomas Petazzoni
- [PATCH v3 1/4] pci: layerscape: move per-pci device fdt fixup in a function
laurentiu.tudor at nxp.com
- [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants
Tom Rini
- Aw: Re: [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants
Tom Rini
- Aw: Re: Re: [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v3 1/6] mmc: fsl_esdhc_imx: rename driver name to match ll_entry
sbabic at denx.de
- [PATCH v3 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
Stefan Roese
- [PATCHv3 10/10] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2
Sebastian Reichel
- [PATCH v3 10/11] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v3 11/11] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH v3 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter
Patrice Chotard
- [PATCH v3 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter
Simon Glass
- [PATCH v3 2/3] test: vboot: add tests for multiple required keys
Thirupathaiah Annapureddy
- [PATCH v3 2/4] fs/squashfs: add support for ZSTD decompression
Joao Marcos Costa
- [PATCH v3 2/4] fs/squashfs: add support for ZSTD decompression
Thomas Petazzoni
- [PATCH v3 2/4] fs/squashfs: add support for ZSTD decompression
Joao Marcos Costa
- [PATCH v3 2/4] pci: layerscape: move pci node search in a common function
laurentiu.tudor at nxp.com
- [PATCH v3 2/5] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCH v3 2/5] phy: mtk-tphy: add PHY_TYPE_SATA
Tom Rini
- [PATCH v3 2/6] mmc: fsl_esdhc_imx: add OF_PLATDATA support
sbabic at denx.de
- [PATCH v3 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Stefan Roese
- [PATCH v3 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Bin Meng
- [PATCH v3 3/3] doc: verified-boot: add required-mode information
Thirupathaiah Annapureddy
- [PATCH v3 3/3] optee: add property no-map to secure reserved memory
Patrice Chotard
- [PATCH v3 3/4] fs/squashfs: add support for LZO decompression
Joao Marcos Costa
- [PATCH v3 3/4] pci: add a few ARI and SRIOV related defines
laurentiu.tudor at nxp.com
- [PATCH v3 3/5] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v3 3/5] reset: add basic reset controller for pciesys
Tom Rini
- [PATCH v3 3/6] gpio: mxc_gpio: add OF_PLATDATA support
sbabic at denx.de
- [PATCH v3 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Stefan Roese
- [PATCH v3 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Bin Meng
- [PATCH v3 4/4] pci: layerscape: add a way of specifying additional iommu mappings
laurentiu.tudor at nxp.com
- [PATCH v3 4/4] test/py: Add tests for LZO and ZSTD
Joao Marcos Costa
- [PATCH v3 4/5] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v3 4/5] ahci: mediatek: add ahci driver
Tom Rini
- [PATCH v3 4/6] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled
sbabic at denx.de
- [PATCH v3 4/8] mips: octeon: cpu.c: Add table for selective swapping
Stefan Roese
- [PATCH v3 5/5] dts: r64: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v3 5/5] dts: r64: add sata- and asm_sel nodes
Tom Rini
- [PATCH v3 5/6] drivers: rename more drivers to match compatible string
sbabic at denx.de
- [PATCH v3 5/6] sandbox: Enable memio operations in board_init
Pratyush Yadav
- [PATCH v3 5/6] sandbox: Enable memio operations in board_init
Simon Glass
- [PATCH v3 5/8] mips: octeon: Add mangle-port.h
Stefan Roese
- [PATCH v3 6/6] mx6cuboxi: enable OF_PLATDATA
sbabic at denx.de
- [PATCH v3 6/6] test: Add tests for the multiplexer framework
Tom Rini
- [PATCH v3 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()
Stefan Roese
- [PATCH v3 7/8] mips: octeon: Add USB DT nodes
Stefan Roese
- [PATCH v3 7/8] mips: octeon: Add USB DT nodes
Bin Meng
- [PATCH v3 7/8] mips: octeon: Add USB DT nodes
Stefan Roese
- [PATCH v3 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support
Stefan Roese
- [PATCH v3] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH v3] board: armltd: Add support for Total Compute platform
Tom Rini
- [PATCH v3] board: armltd: Add support for Total Compute platform
Usama Arif
- [PATCH v3] board: armltd: Add support for Total Compute platform
Tom Rini
- [PATCH v3] cmd: add clone command
Tom Rini
- [PATCH v3] common/board_f: make sure to call fix_fdt() before reserve_fdt()
Pragnesh Patel
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Daniel Schwierzeck
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Daniel Schwierzeck
- [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v3] firmware: psci: Do not bind driver if U-Boot runs in EL3
Michal Simek
- [PATCH v3] firmware: psci: Do not bind driver if U-Boot runs in EL3
Tom Rini
- [PATCH v3] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left
Tom Rini
- [PATCH v3] fsl-layerscape: enable dwc3 snooping feature
Ran Wang
- [PATCH v3] i2c: eeprom: Use reg property instead of offset and size
Michal Simek
- [PATCH v3] mtd: nand: Add NAND controller driver for OcteonTX
Stefan Roese
- [PATCH v3] net: Add NIC controller driver for OcteonTX
Stefan Roese
- [PATCH v3] net: Add NIC controller driver for OcteonTX2
Stefan Roese
- [PATCHv3] usb: max3420: add the gadget driver
Jassi Brar
- [PATCH v4 0/5] fs/squashfs: Add new decompression algorithms
Joao Marcos Costa
- [PATCH v4 0/8] mips/usb: Add Octeon xHCI USB support
Stefan Roese
- [PATCH v4 0/9] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info
Stefan Roese
- [PATCH v4 00/10] Add support MediaTek USB3 DRD driver
Chunfeng Yun
- [PATCH v4 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>
Frank Wunderlich
- [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210
Rick Chen
- [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v4 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform
Lokesh Vutla
- [PATCH v4 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform
Lokesh Vutla
- [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman
Kever Yang
- [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman
Simon Glass
- [PATCH v4 01/10] dt-binding: usb: add bindings for some common properties
Chunfeng Yun
- [PATCH v4 01/11] arm: dts: mt7622: add SATA reset constants
Frank Wunderlich
- [PATCH v4 01/17] Kconfig: Introduce CONFIG_SYS_HAS_SRAM
Tom Rini
- [PATCH v4 01/19] board: ti: board_detect: Add stub functions for EEPROM detection apis
Lokesh Vutla
- [PATCH v4 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD
Chunfeng Yun
- [PATCH v4 02/11] phy: mtk-tphy: add PHY_TYPE_SATA
Frank Wunderlich
- [PATCH v4 02/17] Kconfig: Convert CONFIG_SYS_SRAM_BASE to Kconfig
Tom Rini
- [PATCH v4 02/19] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined
Lokesh Vutla
- [PATCH v4 02/27] rockchip: Allow Bob to use SPI boot
Kever Yang
- [PATCH v4 02/27] rockchip: Allow Bob to use SPI boot
Simon Glass
- [PATCH v4 03/10] usb: add USB_SPEED_SUPER_PLUS
Chunfeng Yun
- [PATCH v4 03/11] phy: mtk-tphy: make shared reg optional for v1
Frank Wunderlich
- [PATCH v4 03/17] Kconfig: Convert CONFIG_SYS_SRAM_SIZE to Kconfig
Tom Rini
- [PATCH v4 03/19] board: ti: j721e: Update fdt fixup logic for interconnect nodes
Lokesh Vutla
- [PATCH v4 04/10] usb: common: add define of usb_speed_string()
Chunfeng Yun
- [PATCH v4 04/11] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v4 04/17] Kconfig: Remove CONFIG_SYS_SRAM_START
Tom Rini
- [PATCH v4 04/19] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled
Lokesh Vutla
- [PATCH v4 05/10] usb: add MediaTek USB3 DRD driver
Chunfeng Yun
- [PATCH v4 05/11] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v4 05/17] cmd: bdinfo: Move sram info prints to generic code
Tom Rini
- [PATCH v4 05/19] arm: mach-k3: Move mmr_unlock to a common location
Lokesh Vutla
- [PATCH v4 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller
Chunfeng Yun
- [PATCH v4 06/11] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCH v4 06/17] board_f: Introduce setup_bdinfo initcall
Tom Rini
- [PATCH v4 06/19] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
Lokesh Vutla
- [PATCH v4 07/10] arm: dts: mt8512: add usb related nodes
Chunfeng Yun
- [PATCH v4 07/11] arm: dts: add watchdog-reboot node for mt7622
Frank Wunderlich
- [PATCH v4 07/17] board_f: Introduce arch_setup_bdinfo initcall
Tom Rini
- [PATCH v4 07/19] arm: mach-k3: j721e: Add detection for j721e
Lokesh Vutla
- [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob
Kever Yang
- [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob
Simon Glass
- [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob
Kever Yang
- [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob
Simon Glass
- [PATCH v4 08/10] configs: mt8512: enable fastboot
Chunfeng Yun
- [PATCH v4 08/11] arm: dts: add dts for Bananapi-R64
Frank Wunderlich
- [PATCH v4 08/17] board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo
Simon Glass
- [PATCH v4 08/17] board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo
Tom Rini
- [PATCH v4 08/19] arm: mach-k3: j721e: Fix unlocking control module registers
Lokesh Vutla
- [PATCH v4 09/10] configs: mt8512: add USB host related configs
Chunfeng Yun
- [PATCH v4 09/11] arm: dts: mt7622: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v4 09/17] board_f: Move sram bdinfo assignments to generic code
Tom Rini
- [PATCH v4 09/19] arm: mach-k3: j7200: Add support for SOC detection
Lokesh Vutla
- [PATCH v4 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH v4 1/1] cmd: provide command sbi
Pragnesh Patel
- [PATCH v4 1/1] cmd: provide command sbi
Pragnesh Patel
- [PATCH v4 1/1] cmd: provide command sbi
Pragnesh Patel
- [PATCH v4 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH v4 1/1] cmd: provide command sbi
Pragnesh Patel
- [PATCH v4 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details
Stefan Roese
- [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig
Tom Rini
- [PATCH v4 1/5] fs/squashfs: Add init and clean-up functions to decompression
Joao Marcos Costa
- [PATCH v4 1/5] fs/squashfs: Add init and clean-up functions to decompression
Thomas Petazzoni
- [PATCH v4 1/5] fs/squashfs: Add init and clean-up functions to decompression
Tom Rini
- [PATCH v4 1/6] fs/squashfs: new filesystem
Tom Rini
- [PATCH v4 1/6] fs/squashfs: new filesystem
Tom Rini
- [PATCH v4 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
Stefan Roese
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Pali Rohár
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Andy Shevchenko
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Andy Shevchenko
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Andy Shevchenko
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Wolfgang Denk
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Wolfgang Denk
- [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Tom Rini
- [PATCH v4 10/10] MAINTAINERS: add mtu3 driver to ARM MEDIATEK
Chunfeng Yun
- [PATCH v4 10/11] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v4 10/17] board_f: m68k: Factor out m68k-specific bdinfo setup
Tom Rini
- [PATCH v4 10/19] arm: mach-k3: j7200: Add support for storing extended boot info from ROM
Lokesh Vutla
- [PATCH v4 11/11] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH v4 11/14] test: environment in ext4
Stephen Warren
- [PATCH v4 11/14] test: environment in ext4
Tom Rini
- [PATCH v4 11/14] test: environment in ext4
Stephen Warren
- [PATCH v4 11/14] test: environment in ext4
Tom Rini
- [PATCH v4 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup
Tom Rini
- [PATCH v4 11/19] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
Lokesh Vutla
- [PATCH v4 12/17] board_f: Remove setup_board_part1
Tom Rini
- [PATCH v4 12/19] board: ti: j7200: Introduce support for j7200 build targets
Lokesh Vutla
- [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI
Heinrich Schuchardt
- [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI
Heinrich Schuchardt
- [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI
Simon Glass
- [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI
Simon Glass
- [PATCH v4 12/35] acpi: Support generation of SPI descriptor
Simon Glass
- [PATCH v4 13/17] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe
Tom Rini
- [PATCH v4 13/19] board: ti: j7200: Add board detection support for j7200
Lokesh Vutla
- [PATCH v4 14/17] drivers: serial: Make serial_initialize return int
Tom Rini
- [PATCH v4 14/19] ram: k3-j721e: Relax version checks for memory controller
Lokesh Vutla
- [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper
Tom Rini
- [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper
Sean Anderson
- [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper
Sean Anderson
- [PATCH v4 15/19] soc: soc_ti_k3: Add device identification for J7200 SoC
Lokesh Vutla
- [PATCH v4 16/17] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC
Tom Rini
- [PATCH v4 16/19] arm: dts: k3-j7200: Add dts support
Lokesh Vutla
- [PATCH v4 17/17] common/board_r: Move blkcache_init call earlier in the boot sequence
Tom Rini
- [PATCH v4 17/19] arm: dts: k3-j7200: Add R5 specific dts support
Lokesh Vutla
- [PATCH v4 18/19] configs: j7200_evm_r5: Add initial support
Lokesh Vutla
- [PATCH v4 19/19] configs: j7200_evm_a72: Add Initial support
Lokesh Vutla
- [PATCH v4 2/5] fs/squashfs: replace sqfs_decompress() parameter
Joao Marcos Costa
- [PATCH v4 2/5] fs/squashfs: replace sqfs_decompress() parameter
Tom Rini
- [PATCH v4 2/6] fs/squashfs: add filesystem commands
Tom Rini
- [PATCH v4 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses
Stefan Roese
- [PATCH v4 2/9] image: Use gd->ram_base/_size in env_get_bootm_size()
Stefan Roese
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Michal Simek
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Simon Glass
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Michal Simek
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Simon Glass
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Michal Simek
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Simon Glass
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Michal Simek
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Simon Glass
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Michal Simek
- [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR
Simon Glass
- [PATCH v4 3/5] fs/squashfs: add support for ZSTD decompression
Joao Marcos Costa
- [PATCH v4 3/5] fs/squashfs: add support for ZSTD decompression
Tom Rini
- [PATCH v4 3/6] include/u-boot, lib/zlib: add sources for zlib decompression
Tom Rini
- [PATCH v4 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon
Stefan Roese
- [PATCH v4 3/9] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v4 4/5] fs/squashfs: add support for LZO decompression
Joao Marcos Costa
- [PATCH v4 4/5] fs/squashfs: add support for LZO decompression
Tom Rini
- [PATCH v4 4/6] fs/squashfs: add support for zlib decompression
Tom Rini
- [PATCH v4 4/8] mips: octeon: cpu.c: Add table for selective swapping
Stefan Roese
- [PATCH v4 4/9] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Stefan Roese
- [PATCH v4 4/9] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Wolfgang Denk
- [PATCH v4 4/9] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Stefan Roese
- [PATCH v4 5/5] test/py: Add tests for LZO and ZSTD
Joao Marcos Costa
- [PATCH v4 5/5] test/py: Add tests for LZO and ZSTD
Tom Rini
- [PATCH v4 5/6] fs/fs.c: add symbolic link case to fs_ls_generic()
Tom Rini
- [PATCH v4 5/8] mips: octeon: Add mangle-port.h
Stefan Roese
- [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()
Ovidiu Panait
- [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()
Ovidiu Panait
- [PATCH v4 6/6] test/py: Add tests for the SquashFS commands
Tom Rini
- [PATCH v4 6/6] test/py: Add tests for the SquashFS commands
Tom Rini
- [PATCH v4 6/6] test/py: Add tests for the SquashFS commands
Joao Marcos Costa
- [PATCH v4 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()
Stefan Roese
- [PATCH v4 6/9] video: cfb_console.c: Use bi_dram[] values on all platforms
Stefan Roese
- [PATCH v4 7/8] mips: octeon: Add USB DT nodes
Stefan Roese
- [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Stefan Roese
- [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Stefan Roese
- [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Arcturus Support
- [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Arcturus Support
- [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Priyanka Jain (OSS)
- [PATCH v4 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support
Stefan Roese
- [PATCH v4 8/9] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Stefan Roese
- [PATCH v4 9/9] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info
Stefan Roese
- [PATCH v5 0/2] Basic Kontron SMARC-sAL28 board support
Michael Walle
- [PATCH v5 0/5] add DM based reset driver for SiFive SoC's
Rick Chen
- [PATCH v5 00/10] Add support MediaTek USB3 DRD driver
Chunfeng Yun
- [PATCH v5 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info
Stefan Roese
- [PATCH v5 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>
Frank Wunderlich
- [PATCH v5 00/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v5 00/17] efi_loader: add capsule update support
AKASHI Takahiro
- [PATCH v5 00/17] efi_loader: add capsule update support
Heinrich Schuchardt
- [PATCH v5 00/17] efi_loader: add capsule update support
AKASHI Takahiro
- [PATCH v5 00/17] efi_loader: add capsule update support
AKASHI Takahiro
- [PATCH v5 00/17] efi_loader: add capsule update support
Tom Rini
- [PATCH v5 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v5 01/10] dt-binding: usb: add bindings for some common properties
Chunfeng Yun
- [PATCH v5 01/11] pinctrl: Add pinmux property support to pinctrl-generic
Sean Anderson
- [PATCH v5 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()
AKASHI Takahiro
- [PATCH v5 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD
Chunfeng Yun
- [PATCH v5 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()
Stefan Roese
- [PATCH v5 02/11] pinctrl: Reformat documentation in dm/pinctrl.h
Sean Anderson
- [PATCH v5 02/17] dfu: modify an argument type for an address
AKASHI Takahiro
- [PATCH v5 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v5 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Daniel Schwierzeck
- [PATCH v5 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v5 03/10] usb: add USB_SPEED_SUPER_PLUS
Chunfeng Yun
- [PATCH v5 03/11] test: pinmux: Add test for pin muxing
Sean Anderson
- [PATCH v5 03/17] common: update: add a generic interface for FIT image
AKASHI Takahiro
- [PATCH v5 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Stefan Roese
- [PATCH v5 04/10] usb: common: add define of usb_speed_string()
Chunfeng Yun
- [PATCH v5 04/10] usb: common: add define of usb_speed_string()
Roger Quadros
- [PATCH v5 04/10] usb: common: add define of usb_speed_string()
Roger Quadros
- [PATCH v5 04/10] usb: common: add define of usb_speed_string()
Chunfeng Yun
- [PATCH v5 04/11] pinctrl: Add support for Kendryte K210 FPIOA
Sean Anderson
- [PATCH v5 04/17] dfu: export dfu_list
AKASHI Takahiro
- [PATCH v5 05/10] usb: add MediaTek USB3 DRD driver
Chunfeng Yun
- [PATCH v5 05/10] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v5 05/11] gpio: dw: Fix warnings about casting int to pointer
Sean Anderson
- [PATCH v5 05/17] efi_loader: add option to initialise EFI subsystem early
AKASHI Takahiro
- [PATCH v5 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller
Chunfeng Yun
- [PATCH v5 06/10] xtensa: Remove local no-op dram_init_banksize()
Stefan Roese
- [PATCH v5 06/11] gpio: dw: Add a trailing underscore to generated name
Sean Anderson
- [PATCH v5 06/17] efi_loader: add efi_create_indexed_name()
AKASHI Takahiro
- [PATCH v5 07/10] arm: dts: mt8512: add usb related nodes
Chunfeng Yun
- [PATCH v5 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms
Stefan Roese
- [PATCH v5 07/11] gpio: dw: Return output value when direction is out
Sean Anderson
- [PATCH v5 07/17] efi_loader: define UpdateCapsule api
AKASHI Takahiro
- [PATCH v5 08/10] configs: mt8512: enable fastboot
Chunfeng Yun
- [PATCH v5 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Stefan Roese
- [PATCH v5 08/11] led: gpio: Default to using node name if label is absent
Sean Anderson
- [PATCH v5 08/17] efi_loader: capsule: add capsule_on_disk support
AKASHI Takahiro
- [PATCH v5 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Stefan Roese
- [PATCH v5 09/10] configs: mt8512: add USB host related configs
Chunfeng Yun
- [PATCH v5 09/11] test: dm: Test for default led naming
Sean Anderson
- [PATCH v5 09/17] efi_loader: capsule: add memory range capsule definitions
AKASHI Takahiro
- [PATCH v5 1/1] cmd: provide command sbi
Heinrich Schuchardt
- [PATCH v5 1/1] cmd: provide command sbi
Pragnesh Patel
- [PATCH v5 1/1] cmd: provide command sbi
Rick Chen
- [PATCH v5 1/2] board: kontron: add sl28 support
Michael Walle
- [PATCH v5 1/5] cmd: bind: allow to bind driver with driver data
Simon Glass
- [PATCH v5 1/8] phy: mtk-tphy: make shared reg optional for v1
Frank Wunderlich
- [PATCH v5 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info
Stefan Roese
- [PATCH v5 10/10] MAINTAINERS: add USB driver to ARM MEDIATEK
Chunfeng Yun
- [PATCH v5 10/11] riscv: Add pinmux and gpio bindings for Kendryte K210
Sean Anderson
- [PATCH v5 10/17] efi_loader: capsule: support firmware update
AKASHI Takahiro
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Rick Chen
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Rick Chen
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Rick Chen
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Ruinland ChuanTzu Tsai
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210
Sean Anderson
- [PATCH v5 11/17] efi_loader: add firmware management protocol for FIT image
AKASHI Takahiro
- [PATCH v5 12/17] dfu: add dfu_write_by_alt()
AKASHI Takahiro
- [PATCH v5 13/17] efi_loader: add firmware management protocol for raw image
AKASHI Takahiro
- [PATCH v5 14/17] cmd: add "efidebug capsule" command
AKASHI Takahiro
- [PATCH v5 15/17] tools: add mkeficapsule command for UEFI capsule update
AKASHI Takahiro
- [PATCH v5 15/17] tools: add mkeficapsule command for UEFI capsule update
Heinrich Schuchardt
- [PATCH v5 15/17] tools: add mkeficapsule command for UEFI capsule update
AKASHI Takahiro
- [PATCH v5 16/17] test/py: add a test for uefi firmware update capsule of FIT image
AKASHI Takahiro
- [PATCH v5 16/17] test/py: add a test for uefi firmware update capsule of FIT image
Heinrich Schuchardt
- [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image
AKASHI Takahiro
- [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image
Heinrich Schuchardt
- [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image
AKASHI Takahiro
- [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image
Heinrich Schuchardt
- [PATCH v5 2/2] board: sl28: add board specific nvm command
Michael Walle
- [PATCH v5 2/5] sandbox: phy: add driver_data for bind test cmd
Simon Glass
- [PATCH v5 2/8] reset: add basic reset controller for pciesys
Frank Wunderlich
- [PATCH v5 3/5] sandbox: dts: Add compatible string for bind-test node
Simon Glass
- [PATCH v5 3/5] sandbox: dts: Add compatible string for bind-test node
Simon Glass
- [PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map
Marek Szyprowski
- [PATCH v5 3/8] ahci: mediatek: add ahci driver
Frank Wunderlich
- Aw: [PATCH v5 3/8] ahci: mediatek: add ahci driver
Frank Wunderlich
- [PATCH v5 4/5] test/py: Update test_bind
Simon Glass
- [PATCH v5 4/8] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCH v5 5/5] doc: add bind/unbind command documentation
Simon Glass
- [PATCH v5 5/5] doc: add bind/unbind command documentation
Simon Glass
- [PATCH v5 5/8] arm: dts: add dts for Bananapi-R64
Frank Wunderlich
- [PATCH v5 5/8] arm: dts: add dts for Bananapi-R64
Frank Wunderlich
- [PATCH v5 6/8] arm: dts: mt7622: add sata- and asm_sel nodes
Frank Wunderlich
- [PATCH v5 7/8] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v5 8/8] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH v5] net: tftp: Add client support for RFC 7440
Tom Rini
- [PATCH v6 0/2] Basic Kontron SMARC-sAL28 board support
Michael Walle
- [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware
Stefan Agner
- [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware
Nicolas Saenz Julienne
- [PATCH v6 0/7] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>
Frank Wunderlich
- [PATCH v6 0/7] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>
Frank Wunderlich
- [PATCH v6 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info
Stefan Roese
- [PATCH v6 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v6 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Daniel Schwierzeck
- [PATCH v6 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()
Stefan Roese
- [PATCH v6 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()
Daniel Schwierzeck
- [PATCH v6 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v6 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Daniel Schwierzeck
- [PATCH v6 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Ovidiu Panait
- [PATCH v6 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Stefan Roese
- [PATCH v6 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Daniel Schwierzeck
- [PATCH v6 05/10] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v6 05/10] xtensa: Remove arch_setup_bdinfo()
Ovidiu Panait
- [PATCH v6 06/10] xtensa: Remove local no-op dram_init_banksize()
Stefan Roese
- [PATCH v6 06/10] xtensa: Remove local no-op dram_init_banksize()
Ovidiu Panait
- [PATCH v6 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms
Stefan Roese
- [PATCH v6 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Stefan Roese
- [PATCH v6 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Stefan Roese
- [PATCH v6 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Daniel Schwierzeck
- [PATCH v6 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Ovidiu Panait
- [PATCH v6 1/2] board: kontron: add sl28 support
Michael Walle
- [PATCH v6 1/2] board: kontron: add sl28 support
Tom Rini
- [PATCH v6 1/7] phy: mtk-tphy: make shared reg optional for v1
Frank Wunderlich
- [PATCH v6 1/7] phy: mtk-tphy: make shared reg optional for v1
Tom Rini
- [PATCH v6 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info
Stefan Roese
- [PATCH v6 2/2] board: sl28: add board specific nvm command
Michael Walle
- [PATCH v6 2/7] reset: drop unnecessary comment for pciesys
Frank Wunderlich
- [PATCH v6 2/7] reset: drop unnecessary comment for pciesys
Tom Rini
- [PATCH v6 3/7] ahci: mediatek: fix copyright and author-lines
Frank Wunderlich
- [PATCH v6 3/7] ahci: mediatek: fix copyright and author-lines
Tom Rini
- [PATCH v6 4/7] clk: mt7622: add needed clocks for ssusb-node
Frank Wunderlich
- [PATCH v6 4/7] clk: mt7622: add needed clocks for ssusb-node
Tom Rini
- [PATCH v6 5/7] arm: dts: rename mt7622-bpi-r64.dts
Frank Wunderlich
- [PATCH v6 5/7] arm: dts: rename mt7622-bpi-r64.dts
Tom Rini
- [PATCH v6 6/7] arm: dts: mt7622: add USB nodes
Frank Wunderlich
- [PATCH v6 6/7] arm: dts: mt7622: add USB nodes
Tom Rini
- [PATCH v6 7/7] arm: dts: mt7623: add USB nodes
Frank Wunderlich
- [PATCH v6 7/7] arm: dts: mt7623: add USB nodes
Tom Rini
- [PATCH v7 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info
Stefan Roese
- [PATCH v7 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v7 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Bin Meng
- [PATCH v7 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()
Stefan Roese
- [PATCH v7 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()
Simon Glass
- [PATCH v7 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v7 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Bin Meng
- [PATCH v7 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v7 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Stefan Roese
- [PATCH v7 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Simon Glass
- [PATCH v7 05/10] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v7 06/10] xtensa: Remove local no-op dram_init_banksize()
Stefan Roese
- [PATCH v7 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms
Stefan Roese
- [PATCH v7 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms
Simon Glass
- [PATCH v7 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Stefan Roese
- [PATCH v7 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Simon Glass
- [PATCH v7 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Stefan Roese
- [PATCH v7 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info
Stefan Roese
- [PATCH v7 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info
Simon Glass
- [PATCH v8 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info
Stefan Roese
- [PATCH v8 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined
Stefan Roese
- [PATCH v8 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()
Stefan Roese
- [PATCH v8 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()
Stefan Roese
- [PATCH v8 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size
Stefan Roese
- [PATCH v8 05/10] xtensa: Remove arch_setup_bdinfo()
Stefan Roese
- [PATCH v8 06/10] xtensa: Remove local no-op dram_init_banksize()
Stefan Roese
- [PATCH v8 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms
Stefan Roese
- [PATCH v8 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c
Stefan Roese
- [PATCH v8 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values
Stefan Roese
- [PATCH v8 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info
Stefan Roese
- [PATCH v9 1/2] led: led_cortina: Add CAxxx LED support
Tom Rini
- [PATCH v9 2/2] board: presidio: add LED support
Tom Rini
- [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200813
Patrice CHOTARD
- [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200813
Tom Rini
- [PULL] u-boot-mips
Daniel Schwierzeck
- [PULL] u-boot-mips
Tom Rini
- [PULL] u-boot-sh/master
Marek Vasut
- [PULL] u-boot-sh/master
Tom Rini
- [PULL] u-boot-usb/master
Marek Vasut
- [PULL] u-boot-usb/master
Tom Rini
- [RESEND][PATCH 0/3] Raspberry pi improvements usb core
Jason Wessel
- [RESEND][PATCH 0/3] Raspberry pi improvements usb core
Marek Vasut
- [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending
Jason Wessel
- [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending
Marek Vasut
- [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending
Jason Wessel
- [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending
Marek Vasut
- [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending
Jason Wessel
- [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending
Marek Vasut
- [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"
Jason Wessel
- [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"
Marek Vasut
- [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"
Jason Wessel
- [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"
Marek Vasut
- [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()
Jason Wessel
- [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()
Marek Vasut
- [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()
Jason Wessel
- [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()
Marek Vasut
- [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter
Patrice CHOTARD
- [RESEND PATCH 0/3] clk: Fix ETH initialization on i.MX6Q boards using CCF
Lukasz Majewski
- [RESEND PATCH 1/3] clk: imx6: Add definition for IMX6QDL_CLK_ENET clock
Lukasz Majewski
- [RESEND PATCH 1/7] Convert CONFIG_SPLASH_SCREEN et al to Kconfig
Simon Glass
- [RESEND PATCH 2/3] clk: imx: Add support for pllv3 enet clock
Lukasz Majewski
- [RESEND PATCH 3/3] clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clock
Lukasz Majewski
- [RESEND PATCH v2 00/18] Add new board: Xen guest for ARM64
Anastasiia Lukianenko
- [RESEND PATCH v2 00/18] Add new board: Xen guest for ARM64
Oleksandr Andrushchenko
- [RESEND PATCH v2 01/18] Add MIT License
Anastasiia Lukianenko
- [RESEND PATCH v2 01/18] Add MIT License
Tom Rini
- [RESEND PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN
Anastasiia Lukianenko
- [RESEND PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN
Tom Rini
- [RESEND PATCH v2 03/18] xen: Add essential and required interface headers
Anastasiia Lukianenko
- [RESEND PATCH v2 03/18] xen: Add essential and required interface headers
Tom Rini
- [RESEND PATCH v2 04/18] board: Introduce xenguest_arm64 board
Anastasiia Lukianenko
- [RESEND PATCH v2 04/18] board: Introduce xenguest_arm64 board
Tom Rini
- [RESEND PATCH v2 05/18] xen: Port Xen hypervisor related code from mini-os
Anastasiia Lukianenko
- [RESEND PATCH v2 05/18] xen: Port Xen hypervisor related code from mini-os
Tom Rini
- [RESEND PATCH v2 06/18] xen: Port Xen event channel driver from mini-os
Anastasiia Lukianenko
- [RESEND PATCH v2 06/18] xen: Port Xen event channel driver from mini-os
Tom Rini
- [RESEND PATCH v2 07/18] serial: serial_xen: Add Xen PV serial driver
Anastasiia Lukianenko
- [RESEND PATCH v2 07/18] serial: serial_xen: Add Xen PV serial driver
Tom Rini
- [RESEND PATCH v2 08/18] linux/compat.h: Add wait_event_timeout macro
Anastasiia Lukianenko
- [RESEND PATCH v2 08/18] linux/compat.h: Add wait_event_timeout macro
Tom Rini
- [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation
Anastasiia Lukianenko
- [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation
Tom Rini
- [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation
Andy Shevchenko
- [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation
Artem Mygaiev
- [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation
Tom Rini
- [RESEND PATCH v2 10/18] xen: Port Xen bus driver from mini-os
Anastasiia Lukianenko
- [RESEND PATCH v2 10/18] xen: Port Xen bus driver from mini-os
Tom Rini
- [RESEND PATCH v2 11/18] xen: Port Xen grant table driver from mini-os
Anastasiia Lukianenko
- [RESEND PATCH v2 11/18] xen: Port Xen grant table driver from mini-os
Tom Rini
- [RESEND PATCH v2 12/18] xen: pvblock: Add initial support for para-virtualized block driver
Anastasiia Lukianenko
- [RESEND PATCH v2 12/18] xen: pvblock: Add initial support for para-virtualized block driver
Tom Rini
- [RESEND PATCH v2 13/18] xen: pvblock: Enumerate virtual block devices
Anastasiia Lukianenko
- [RESEND PATCH v2 13/18] xen: pvblock: Enumerate virtual block devices
Tom Rini
- [RESEND PATCH v2 14/18] xen: pvblock: Read XenStore configuration and initialize
Anastasiia Lukianenko
- [RESEND PATCH v2 14/18] xen: pvblock: Read XenStore configuration and initialize
Tom Rini
- [RESEND PATCH v2 15/18] xen: pvblock: Implement front-back protocol and do IO
Anastasiia Lukianenko
- [RESEND PATCH v2 15/18] xen: pvblock: Implement front-back protocol and do IO
Tom Rini
- [RESEND PATCH v2 16/18] xen: pvblock: Print found devices indices
Anastasiia Lukianenko
- [RESEND PATCH v2 16/18] xen: pvblock: Print found devices indices
Tom Rini
- [RESEND PATCH v2 17/18] board: xen: De-initialize before jumping to Linux
Anastasiia Lukianenko
- [RESEND PATCH v2 17/18] board: xen: De-initialize before jumping to Linux
Tom Rini
- [RESEND PATCH v2 18/18] doc: xen: Add Xen guest ARM64 board documentation
Anastasiia Lukianenko
- [RESEND PATCH v2 18/18] doc: xen: Add Xen guest ARM64 board documentation
Tom Rini
- [RFC 3/4] dtoc: add support for generate stuct udevice_id
Simon Glass
- [RFC 3/4] dtoc: add support for generate stuct udevice_id
Walter Lozano
- [RFC PATCH 0/4] Add 32bit-mode for mt7622
Frank Wunderlich
- [RFC PATCH 1/2] efi: arm: do not overlap non ram memory on efi allocation
Maxim Uvarov
- [RFC PATCH 1/4] mt7622: Support to build 32 bits version.
Frank Wunderlich
- [RFC PATCH 1/4] mt7622: Support to build 32 bits version.
Sam Shih
- [RFC PATCH 1/4] mt7622: Support to build 32 bits version.
Frank Wunderlich
- [RFC PATCH 2/2] efi_memory: refine overlap_only_ram description
Maxim Uvarov
- [RFC PATCH 2/4] mt7622: add lowlevel_init from 2014-04
Frank Wunderlich
- [RFC PATCH 3/4] jumparch64: insert into bootm
Frank Wunderlich
- [RFC PATCH 4/4] jumparch64: add go64
Frank Wunderlich
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Chris Packham
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Joe Hershberger
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Wolfgang Denk
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Stefano Babic
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Chris Packham
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Chris Packham
- [RFC PATCH] tools: env: Add an option to have an empty default environment
Wolfgang Denk
- [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL
Simon Glass
- [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL
Walter Lozano
- [RFCv2 01/16] common: Drop asm/global_data.h from common header
Tom Rini
- [RFCv2 02/16] common: Drop display_options.h from common header
Tom Rini
- [RFCv2 03/16] common: Drop linux/printk.h from common header
Tom Rini
- [RFCv2 04/16] Fix code style for time functions
Tom Rini
- [RFCv2 05/16] common: Drop time.h from common header
Tom Rini
- [RFCv2 06/16] common: Drop linux/string.h from common header
Tom Rini
- [RFCv2 07/16] common: Drop asm/u-boot.h from common header
Tom Rini
- [RFCv2 08/16] common: Drop stdio.h from common header
Tom Rini
- [RFCv2 09/16] common: Drop stdarg.h from common header
Tom Rini
- [RFCv2 10/16] common: Drop vsprintf.h from common header
Tom Rini
- [RFCv2 11/16] common: Drop errno.h from common header
Tom Rini
- [RFCv2 12/16] common: Drop linux/kernel.h from common header
Tom Rini
- [RFCv2 13/16] common: Drop linux/types.h from common header
Tom Rini
- [RFCv2 14/16] common: Move the build-system includes to a separate file
Tom Rini
- [RFCv2 15/16] common: Add a comment about the current state of common.h
Tom Rini
- [RFCv2 16/16] Makefile: Drop linux/kconfig.h from config.h
Tom Rini
- [RFCv2] common: Drop remaining includes in common.h
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] Pull request: u-boot-riscv/master 20200804
uboot at andestech.com
- [U-Boot] Pull request: u-boot-riscv/master 20200804
Tom Rini
- [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance
ChiaWei Wang
- [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance
Tom Rini
- [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance
ChiaWei Wang
- [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance
Tom Rini
- [Uboot-stm32] [PATCH 01/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check
Patrice CHOTARD
- [Uboot-stm32] [PATCH 01/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check
Patrice CHOTARD
- [Uboot-stm32] [PATCH 02/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected
Patrice CHOTARD
- [Uboot-stm32] [PATCH 02/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected
Patrice CHOTARD
- [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power
Patrice CHOTARD
- [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power
Patrice CHOTARD
- [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power
Patrice CHOTARD
- [Uboot-stm32] [PATCH 04/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init
Patrice CHOTARD
- [Uboot-stm32] [PATCH 04/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init
Patrice CHOTARD
- [Uboot-stm32] [PATCH 05/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf
Patrice CHOTARD
- [Uboot-stm32] [PATCH 05/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf
Patrice CHOTARD
- [Uboot-stm32] [PATCH 06/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix
Patrice CHOTARD
- [Uboot-stm32] [PATCH 06/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix
Patrice CHOTARD
- [Uboot-stm32] [PATCH 07/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init
Patrice CHOTARD
- [Uboot-stm32] [PATCH 07/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init
Patrice CHOTARD
- [Uboot-stm32] [PATCH 08/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions
Patrice CHOTARD
- [Uboot-stm32] [PATCH 08/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions
Patrice CHOTARD
- [Uboot-stm32] [PATCH 09/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup
Patrice CHOTARD
- [Uboot-stm32] [PATCH 09/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup
Patrice CHOTARD
- [Uboot-stm32] [PATCH 10/11] arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef
Patrice CHOTARD
- [Uboot-stm32] [PATCH 11/11] arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef
Patrice CHOTARD
- [Uboot-stm32] [PATCH] board: stm32mp1: remove board.c
Patrice CHOTARD
- [Uboot-stm32] [PATCH] board: stm32mp1: remove board.c
Patrice CHOTARD
- [Uboot-stm32] [PATCH] board: stm32mp1: use const for struct node_info
Patrice CHOTARD
- [Uboot-stm32] [PATCH] board: stm32mp1: use const for struct node_info
Patrice CHOTARD
- [Uboot-stm32] [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter
Patrice CHOTARD
- [v2] arm: mx6: Make all i.MX6 SoCs user-selectable
Tom Rini
- [v2] arm: mx6: Make all i.MX6 SoCs user-selectable
Marcin Niestrój
- [v2] arm: mx6: Make all i.MX6 SoCs user-selectable
sbabic at denx.de
- [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
Y.b. Lu
- [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes
Jaehoon Chung
- [v3, 01/11] mmc: add a reinit() API
Jaehoon Chung
- [v3, 02/11] mmc: fsl_esdhc: add a reinit() callback
Jaehoon Chung
- [v3, 05/11] mmc: add a hs400_tuning flag
Jaehoon Chung
- [v3, 05/11] mmc: add a hs400_tuning flag
Y.b. Lu
- [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface
Jaehoon Chung
- [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface
Y.b. Lu
- [Xilinx Zynq]: spurious UART receive on startup
Norbert Braun
- [Xilinx Zynq]: spurious UART receive on startup
Michal Simek
- [Xilinx Zynq]: spurious UART receive on startup
Norbert Braun
- am654_sdhci: mmc fail to send stop cmd
Jan Kiszka
- binman build questions
Jan Kiszka
- binman build questions
Simon Glass
- board/arch-specific artifacts vs. make clean
Jan Kiszka
- Can't boot from sd-card on BeagleBone Black
Pavel Yermolenko
- Can't boot from sd-card on BeagleBone Black
Peter Robinson
- Can't boot from sd-card on BeagleBone Black
Pavel Yermolenko
- Can't boot from sd-card on BeagleBone Black
Pavel Yermolenko
- Cannot boot from eMMC on Odroid C4 with u-boot 2020.10-rc2
Garrick James
- Chainloading U-Boot from Fastboot on Tegra30
Peter Geis
- Chainloading U-Boot from Fastboot on Tegra30
Tom Rini
- Chainloading U-Boot from Fastboot on Tegra30
Peter Geis
- Chainloading U-Boot from Fastboot on Tegra30
Tom Rini
- Chainloading U-Boot from Fastboot on Tegra30
Stephen Warren
- Chainloading U-Boot from Fastboot on Tegra30
Peter Geis
- Chainloading U-Boot from Fastboot on Tegra30
Peter Geis
- chromebook_coral: build failure
Simon Glass
- chromebook_coral: build failure
Wolfgang Wallner
- crash with CONFIG_OF_LIVE
Frank Wunderlich
- Aw: crash with CONFIG_OF_LIVE
Frank Wunderlich
- Aw: crash with CONFIG_OF_LIVE
Frank Wunderlich
- Error when decompressing with LZO
Joao Marcos Costa
- Error when decompressing with LZO
Tom Rini
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Pali Rohár
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Andre Heider
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Pali Rohár
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Pali Rohár
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Andre Heider
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Pali Rohár
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Pali Rohár
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Andre Heider
- Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)
Pali Rohár
- ext2ls zero-length directory entries?
Joe Buehler
- from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:
Mauro Condarelli
- from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:
Daniel Schwierzeck
- from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:
Mauro Condarelli
- HDMi Output on OrangePi Win/Win Plus Allwinner A64 (SUN50I)
Anton Gorlov
- HDMi Output on OrangePi Win/Win Plus Allwinner A64 (SUN50I)
Anton Gorlov
- I2C on imx8qm - Failed to enable ipg clk
Oliver Graute
- I2C on imx8qm - Failed to enable ipg clk
Anatolij Gustschin
- I2C on imx8qm - Failed to enable ipg clk
Oliver Graute
- Improvements to FIT ciphering
Philippe REYNES
- Improvements to FIT ciphering
Patrick Oppenlander
- Improvements to FIT ciphering
Philippe REYNES
- Improvements to FIT ciphering
Patrick Oppenlander
- libfdt: Warnings of signed/unsigned comparison
Jan Kiszka
- libfdt: Warnings of signed/unsigned comparison
Simon Glass
- MAIX: CONFIG_SYS_INIT_SP_ADDR
Heinrich Schuchardt
- MAIX: CONFIG_SYS_INIT_SP_ADDR
Sean Anderson
- MAIX: CONFIG_SYS_INIT_SP_ADDR
Heinrich Schuchardt
- MAIX: CONFIG_SYS_INIT_SP_ADDR
Sean Anderson
- make htmldocs fails with Sphinx 3
Heinrich Schuchardt
- master u-boot broken for HiFive Unleashed
Bin Meng
- master u-boot broken for HiFive Unleashed
Atish Patra
- master u-boot broken for HiFive Unleashed
Pragnesh Patel
- master u-boot broken for HiFive Unleashed
Pragnesh Patel
- master u-boot broken for HiFive Unleashed
Pragnesh Patel
- master u-boot broken for HiFive Unleashed
Atish Patra
- Memory POST Test - Timing
Brownlie, Lewis
- Missing BMP 565RGB video support
Trommel, Kees (Contractor)
- Not able to boot SPL+U-boot.img through SPI NOR Flash on imx6 based board
nvmurali
- NVMe boot issues on RockPro64
Punit Agrawal
- NVMe boot issues on RockPro64
Bin Meng
- NVMe boot issues on RockPro64
Punit Agrawal
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Sean Anderson
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Sean Anderson
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Sean Anderson
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Sean Anderson
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Atish Patra
- OpenBSI and U-Boot
Atish Patra
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Atish Patra
- OpenBSI and U-Boot
Rick Chen
- OpenBSI and U-Boot
Heinrich Schuchardt
- OpenBSI and U-Boot
Atish Patra
- OpenBSI and U-Boot
Rick Chen
- Please pull u-boot-dm
Simon Glass
- Please pull u-boot-dm
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26
Stefan Roese
- Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26
Tom Rini
- Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26
Stefan Roese
- Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26
Tom Rini
- Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26
Peter Robinson
- Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26
Tom Rini
- Please pull u-boot-video
Anatolij Gustschin
- Please pull u-boot-video
Tom Rini
- Please pull u-boot-x86
Bin Meng
- Please pull u-boot-x86
Tom Rini
- PowerPC progress
Wolfgang Denk
- PowerPC progress
Dan Malek
- PowerPC progress
Simon Glass
- PowerPC progress
Dan Malek
- PowerPC progress
Priyanka Jain
- PowerPC progress
Simon Glass
- Pull request: u-boot-riscv/master 20200814
uboot at andestech.com
- Pull request: u-boot-riscv/master 20200814
Tom Rini
- Pull request: u-boot-riscv/master 20200825
uboot at andestech.com
- Pull request: u-boot-riscv/master 20200825
Tom Rini
- Pull request: u-boot-rockchip-20200820
Kever Yang
- Pull request: u-boot-rockchip-20200820
Tom Rini
- Pull request for UEFI sub-system for efi-2020-10-rc2
Heinrich Schuchardt
- Pull request for UEFI sub-system for efi-2020-10-rc2
Tom Rini
- Pull request for UEFI sub-system for efi-2020-10-rc3
Heinrich Schuchardt
- Pull request for UEFI sub-system for efi-2020-10-rc3
Tom Rini
- Pull request for UEFI sub-system for efi-2020-10-rc3 (2)
Heinrich Schuchardt
- Pull request for UEFI sub-system for efi-2020-10-rc3 (2)
Tom Rini
- Pull request for UEFI sub-system for efi-2020-10-rc3 (3)
Heinrich Schuchardt
- Pull request for UEFI sub-system for efi-2020-10-rc3 (3)
Tom Rini
- pytest to test reset
Peng Fan
- pytest to test reset
Simon Glass
- Q: sp805 watchdog is only for fsl ?
Ran Shalit
- Question about 0.9V on lsch3
Martin Kaistra
- Question about 0.9V on lsch3
Priyanka Jain (OSS)
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Andrii Voloshyn
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Stefan Roese
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Andrii Voloshyn
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Stefan Roese
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Andrii Voloshyn
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Stefan Roese
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Andrii Voloshyn
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Weijie Gao
- reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)
Andrii Voloshyn
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Marek Vasut
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Marek Vasut
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Marek Vasut
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Marek Vasut
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Dinh Nguyen
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Tan, Ley Foon
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Ralph Siemsen
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Marek Vasut
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Ralph Siemsen
- Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()
Wolfgang Grandegger
- RISC-V: crash in riscv_get_time()
Heinrich Schuchardt
- RISC-V: crash in riscv_get_time()
Rick Chen
- RISC-V: crash in riscv_get_time()
Heinrich Schuchardt
- RISC-V: crash in riscv_get_time()
Bin Meng
- RISC-V: crash in riscv_get_time()
Heinrich Schuchardt
- RISC-V: crash in riscv_get_time()
Bin Meng
- RISC-V: crash in riscv_get_time()
Heinrich Schuchardt
- RISC-V Microconference Accepted into 2020 Linux Plumbers Conference
atish patra
- RISCV64 - u-boot FDT control address unset on qemu-riscv64_defconfig ?
Alexander von Gluck IV
- RISCV64 - u-boot FDT control address unset on qemu-riscv64_defconfig ?
Alexander von Gluck IV
- rk3399-gru-kevin: issues on bringup
Simon Glass
- rk3399-gru-kevin: issues on bringup
Simon Glass
- rk3399-gru-kevin: issues on bringup
Simon Glass
- rk3399-gru-kevin: issues on bringup
Marty E. Plummer
- rk3399-gru-kevin: issues on bringup
Alper Nebi Yasak
- RPi4 U-Boot freeze
Stefan Agner
- Sections .dynamic and .dynsym in UEFI binaries
Heinrich Schuchardt
- Sections .dynamic and .dynsym in UEFI binaries
Simon Glass
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
André Przywara
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
Simon Glass
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
André Przywara
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
Simon Glass
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
Samuel Holland
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
Simon Glass
- sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)
Simon Glass
- sunxi_nand_spl reading zeros on Cubietruck
Zahari Zahariev
- u-boot 2015.4 & 2015.10 can't determine partition table on samsung emmc (error -19)
Eugene Kruglikov
- U-Boot as ARM Coreboot Payload (for Chromebook Duet)
Matthew Grochowalski
- U-Boot as ARM Coreboot Payload (for Chromebook Duet)
Simon Glass
- U-Boot as ARM Coreboot Payload (for Chromebook Duet)
Dennis Gilmore
- U-Boot as ARM Coreboot Payload (for Chromebook Duet)
Simon Glass
- U-Boot Fails w/ Memory Test
Brownlie, Lewis
- U-Boot Fails w/ Memory Test
Heinrich Schuchardt
- U-Boot Fails w/ Memory Test
Brownlie, Lewis
- U-Boot issue
0x5c4r3
- U-Boot POST Memory Test
Brownlie, Lewis
- U-Boot POST Memory Test
Heinrich Schuchardt
- U-Boot POST Memory Test
Brownlie, Lewis
- U-Boot stats
Adam Ford
- U-Boot stats
Wolfgang Denk
- u-boot tarball downloads via https
Chris Packham
- u-boot tarball downloads via https
Tom Rini
- x86: apl: Acessing SPI flash when booting with Coreboot/U-Boot
Wolfgang Wallner
- x86: apl: Acessing SPI flash when booting with Coreboot/U-Boot
Simon Glass
- Z-Turn board support on U-Boot 2020.10-rc2, got some errors.
Alexandre GRIVEAUX
- Z-Turn board support on U-Boot 2020.10-rc2, got some errors.
Michal Simek
- Z-Turn board support on U-Boot 2020.10-rc2, got some errors.
Alexandre GRIVEAUX
- Z-Turn board support on U-Boot 2020.10-rc2, got some errors.
Michal Simek
Last message date:
Mon Aug 31 23:53:55 CEST 2020
Archived on: Mon Aug 31 23:54:08 CEST 2020
This archive was generated by
Pipermail 0.09 (Mailman edition).