[EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
Kostya Porotchkin
kostap at marvell.com
Wed Aug 19 19:28:49 CEST 2020
________________________________________
From: Pali Rohár <pali at kernel.org>
Sent: Wednesday, August 19, 2020 16:57
To: Stefan Roese; Kostya Porotchkin
Cc: u-boot at lists.denx.de
Subject: [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT
External Email
----------------------------------------------------------------------
Change active-high to active-low and change DT property name from
reset-gpio to reset-gpios. This format of gpio reset is used by
pci-aardvark driver in Linux kernel.
Signed-off-by: Pali Rohár <pali at kernel.org>
Reviewed-by: Konstantin Porotchkin <kostap at marvell.com>
---
arch/arm/dts/armada-3720-db.dts | 2 +-
arch/arm/dts/armada-3720-espressobin.dts | 2 +-
arch/arm/dts/armada-3720-turris-mox.dts | 2 +-
drivers/pci/pci-aardvark.c | 6 +++---
4 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 1b219c423b..1b1b66b94d 100644
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -159,6 +159,6 @@
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
- reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 84e2c2adba..f10a953ec5 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -145,6 +145,6 @@
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
- reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "okay";
};
diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
index 0f0a6ce65d..974270cc8c 100644
--- a/arch/arm/dts/armada-3720-turris-mox.dts
+++ b/arch/arm/dts/armada-3720-turris-mox.dts
@@ -172,6 +172,6 @@
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
- reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
status = "disabled";
};
diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
index 711b930d0f..5b3f23c184 100644
--- a/drivers/pci/pci-aardvark.c
+++ b/drivers/pci/pci-aardvark.c
@@ -616,7 +616,7 @@ static int pcie_advk_probe(struct udevice *dev)
#if CONFIG_IS_ENABLED(DM_GPIO)
struct gpio_desc reset_gpio;
- gpio_request_by_name(dev, "reset-gpio", 0, &reset_gpio,
+ gpio_request_by_name(dev, "reset-gpios", 0, &reset_gpio,
GPIOD_IS_OUT);
/*
* Issue reset to add-in card through the dedicated GPIO.
@@ -633,9 +633,9 @@ static int pcie_advk_probe(struct udevice *dev)
*/
if (dm_gpio_is_valid(&reset_gpio)) {
dev_dbg(pcie->dev, "Toggle PCIE Reset GPIO ...\n");
- dm_gpio_set_value(&reset_gpio, 0);
- mdelay(200);
dm_gpio_set_value(&reset_gpio, 1);
+ mdelay(200);
+ dm_gpio_set_value(&reset_gpio, 0);
}
#else
dev_dbg(pcie->dev, "PCIE Reset on GPIO support is missing\n");
--
2.20.1
More information about the U-Boot
mailing list