August 2020 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Aug 1 02:26:54 CEST 2020
Ending: Mon Aug 31 23:53:55 CEST 2020
Messages: 2835

• [PATCH v1 1/2] x86: sipi_vector: Append appropriate suffixes   Bin Meng
  • [PATCH v1 1/2] x86: sipi_vector: Append appropriate suffixes   Bin Meng
• [PATCH v1 2/2] x86: call32: Append appropriate suffixes   Bin Meng
  • [PATCH v1 2/2] x86: call32: Append appropriate suffixes   Bin Meng
• [PATCH 3/6] riscv: load addresses for Sipeed MAIX   Heinrich Schuchardt
  • [PATCH 3/6] riscv: load addresses for Sipeed MAIX   Rick Chen
    • [PATCH 3/6] riscv: load addresses for Sipeed MAIX   Heinrich Schuchardt
      • [PATCH 3/6] riscv: load addresses for Sipeed MAIX   Rick Chen
• [PATCH v2 00/18] Add new board: Xen guest for ARM64   Anastasiia Lukianenko
• [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Stefan Agner
  • [PATCH v6 0/4] usb: xhci: Load Raspberry Pi 4 VL805's firmware   Nicolas Saenz Julienne
• [PATCH 0/6] efi_selftest: allow UEFI testing on MAIX   Sean Anderson
• [PATCH 2/6] configs: reduce stack size of Sipeed MAIX   Sean Anderson
• [PATCH] riscv: additional crash information   Sean Anderson
  • [PATCH] riscv: additional crash information   Heinrich Schuchardt
    • [PATCH] riscv: additional crash information   Sean Anderson
• [PATCH v2 1/1] riscv: additional crash information   Heinrich Schuchardt
  • [PATCH v2 1/1] riscv: additional crash information   Heinrich Schuchardt
    • [PATCH v2 1/1] riscv: additional crash information   Bin Meng
    • [PATCH v2 1/1] riscv: additional crash information   Rick Chen
• Pull request for UEFI sub-system for efi-2020-10-rc2   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-10-rc2   Tom Rini
• [PATCH 00/16] x86: zboot: Enhance the 'zboot' command   Simon Glass
  • [PATCH 01/16] x86: Update the bootparam header   Simon Glass
    • [PATCH 01/16] x86: Update the bootparam header   Wolfgang Wallner
  • [PATCH 02/16] x86: zimage: Use a state struct to hold the state   Simon Glass
    • [PATCH 02/16] x86: zimage: Use a state struct to hold the state   Wolfgang Wallner
  • [PATCH 03/16] x86: zimage: Avoid using #ifdef   Simon Glass
    • [PATCH 03/16] x86: zimage: Avoid using #ifdef   Wolfgang Wallner
  • [PATCH 04/16] x86: zboot: Move kernel-version code into a function   Simon Glass
    • [PATCH 04/16] x86: zboot: Move kernel-version code into a function   Wolfgang Wallner
  • [PATCH 05/16] x86: zboot: Correct image type   Simon Glass
    • [PATCH 05/16] x86: zboot: Correct image type   Wolfgang Wallner
  • [PATCH 06/16] x86: zimage: Disable interrupts just before booting   Simon Glass
    • [PATCH 06/16] x86: zimage: Disable interrupts just before booting   Wolfgang Wallner
  • [PATCH 07/16] x86: zboot: Set up a sub-command structure   Simon Glass
    • [PATCH 07/16] x86: zboot: Set up a sub-command structure   Wolfgang Wallner
  • [PATCH 08/16] x86: zboot: Add a 'go' subcommand   Simon Glass
    • [PATCH 08/16] x86: zboot: Add a 'go' subcommand   Wolfgang Wallner
  • [PATCH 09/16] x86: zboot: Add an 'info' subcommand   Simon Glass
    • [PATCH 09/16] x86: zboot: Add an 'info' subcommand   Wolfgang Wallner
  • [PATCH 10/16] x86: zboot: Add an 'setup' subcommand   Simon Glass
    • [PATCH 10/16] x86: zboot: Add an 'setup' subcommand   Wolfgang Wallner
  • [PATCH 11/16] x86: zboot: Set environment variables for image locations   Simon Glass
    • [PATCH 11/16] x86: zboot: Set environment variables for image locations   Wolfgang Wallner
  • [PATCH 12/16] x86: zboot: Allow setting a separate setup base address   Simon Glass
    • [PATCH 12/16] x86: zboot: Allow setting a separate setup base address   Wolfgang Wallner
  • [PATCH 13/16] x86: zboot: Add an option to dump the setup information   Simon Glass
    • [PATCH 13/16] x86: zboot: Add an option to dump the setup information   Wolfgang Wallner
  • [PATCH 14/16] x86: zboot: Allow overriding the command line   Simon Glass
    • [PATCH 14/16] x86: zboot: Allow overriding the command line   Wolfgang Wallner
  • [PATCH 15/16] cros: Update chromium documentation   Simon Glass
    • [PATCH 15/16] cros: Update chromium documentation   Wolfgang Wallner
  • [PATCH 16/16] cros: Add information about booting Chrome OS on x86   Simon Glass
    • [PATCH 16/16] cros: Add information about booting Chrome OS on x86   Wolfgang Wallner
  • [PATCH 00/16] x86: zboot: Enhance the 'zboot' command   Wolfgang Wallner
• [PATCH 1/2] tools: env: Fix printf() warning in fw_env   Simon Glass
  • [PATCH 2/2] tools: env: Avoid an uninited warning with was_locked   Simon Glass
    • [PATCH 2/2] tools: env: Avoid an uninited warning with was_locked   Tom Rini
  • [PATCH 1/2] tools: env: Fix printf() warning in fw_env   Tom Rini
• PowerPC progress   Wolfgang Denk
  • PowerPC progress   Dan Malek
  • PowerPC progress   Simon Glass
    • PowerPC progress   Dan Malek
      • PowerPC progress   Priyanka Jain
      • PowerPC progress   Simon Glass
• [BUG] DM_VIDEO broken on imx6q   Soeren Moch
  • [BUG] DM_VIDEO broken on imx6q   Anatolij Gustschin
    • [BUG] DM_VIDEO broken on imx6q   Soeren Moch
• RISC-V Microconference Accepted into 2020 Linux Plumbers Conference   atish patra
• [PATCH] sh: r2dplus: Switch to DM ETH   Marek Vasut
• [PATCH] sh: r2dplus: Add pci enum to preboot   Marek Vasut
• [PATCH 1/3] sh: Set gd->malloc_base if MALLOC_F_LEN is set   Marek Vasut
  • [PATCH 2/3] sh: r2dplus: Add SCIF1 to the basic DT   Marek Vasut
  • [PATCH 3/3] sh: r2dplus: Enable DM_SERIAL and DM_CLK   Marek Vasut
• [PATCH] sh: r2dplus: Enable additional PCI ethernet devices   Marek Vasut
• [PATCH V2] dm: core: Add late driver remove option   Marek Vasut
  • [PATCH V2] dm: core: Add late driver remove option   Simon Glass
    • [PATCH V2] dm: core: Add late driver remove option   Marek Vasut
      • [PATCH V2] dm: core: Add late driver remove option   Simon Glass
      • [PATCH V2] dm: core: Add late driver remove option   Stefan Roese
      • [PATCH V2] dm: core: Add late driver remove option   Simon Glass
• [PATCH 00/16] common: Drop remaining includes in common.h   Simon Glass
  • [PATCH 03/16] common: Drop linux/printk.h from common header   Simon Glass
  • [PATCH 06/16] common: Drop linux/string.h from common header   Simon Glass
  • [PATCH 07/16] common: Drop asm/u-boot.h from common header   Simon Glass
  • [PATCH 10/16] common: Drop vsprintf.h from common header   Simon Glass
  • [RFCv2] common: Drop remaining includes in common.h   Tom Rini
    • [RFCv2 01/16] common: Drop asm/global_data.h from common header   Tom Rini
    • [RFCv2 02/16] common: Drop display_options.h from common header   Tom Rini
    • [RFCv2 03/16] common: Drop linux/printk.h from common header   Tom Rini
    • [RFCv2 04/16] Fix code style for time functions   Tom Rini
    • [RFCv2 05/16] common: Drop time.h from common header   Tom Rini
    • [RFCv2 06/16] common: Drop linux/string.h from common header   Tom Rini
    • [RFCv2 07/16] common: Drop asm/u-boot.h from common header   Tom Rini
    • [RFCv2 08/16] common: Drop stdio.h from common header   Tom Rini
    • [RFCv2 09/16] common: Drop stdarg.h from common header   Tom Rini
    • [RFCv2 10/16] common: Drop vsprintf.h from common header   Tom Rini
    • [RFCv2 11/16] common: Drop errno.h from common header   Tom Rini
    • [RFCv2 12/16] common: Drop linux/kernel.h from common header   Tom Rini
    • [RFCv2 13/16] common: Drop linux/types.h from common header   Tom Rini
    • [RFCv2 14/16] common: Move the build-system includes to a separate file   Tom Rini
    • [RFCv2 15/16] common: Add a comment about the current state of common.h   Tom Rini
    • [RFCv2 16/16] Makefile: Drop linux/kconfig.h from config.h   Tom Rini
• [PATCH 01/16] common: Drop asm/global_data.h from common header   Simon Glass
• [PATCH 02/16] common: Drop display_options.h from common header   Simon Glass
• [PATCH 04/16] Fix code style for time functions   Simon Glass
• [PATCH 05/16] common: Drop time.h from common header   Simon Glass
• [PATCH 08/16] common: Drop stdio.h from common header   Simon Glass
• [PATCH 09/16] common: Drop stdarg.h from common header   Simon Glass
• [PATCH 11/16] common: Drop errno.h from common header   Simon Glass
• [PATCH 12/16] common: Drop linux/kernel.h from common header   Simon Glass
• [PATCH 13/16] common: Drop linux/types.h from common header   Simon Glass
• [PATCH 14/16] common: Move the build-system includes to a separate file   Simon Glass
• [PATCH 15/16] common: Add a comment about the current state of common.h   Simon Glass
• [PATCH 16/16] Makefile: Drop linux/kconfig.h from config.h   Simon Glass
• [PATCH] x86: irq: Fix some typos   Bin Meng
• [PATCH 1/2] x86: apl: fsp_bindings: Add support for u64 parameters   Bin Meng
• [PATCH 2/2] arch: x86: apl: Update FSP parameters   Bin Meng
• U-Boot as ARM Coreboot Payload (for Chromebook Duet)   Simon Glass
  • U-Boot as ARM Coreboot Payload (for Chromebook Duet)   Matthew Grochowalski
  • U-Boot as ARM Coreboot Payload (for Chromebook Duet)   Dennis Gilmore
    • U-Boot as ARM Coreboot Payload (for Chromebook Duet)   Simon Glass
• rk3399-gru-kevin: issues on bringup   Simon Glass
  • rk3399-gru-kevin: issues on bringup   Simon Glass
    • rk3399-gru-kevin: issues on bringup   Simon Glass
      • rk3399-gru-kevin: issues on bringup   Marty E. Plummer
  • rk3399-gru-kevin: issues on bringup   Alper Nebi Yasak
• [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Bin Meng
  • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Sean Anderson
    • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Heinrich Schuchardt
      • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Sean Anderson
      • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Heinrich Schuchardt
      • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Sean Anderson
      • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Heinrich Schuchardt
      • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Heinrich Schuchardt
      • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Sean Anderson
  • [PATCH 1/1] clk: kendryte/pll.h: do not redefine nop()   Bin Meng
• [PATCH 1/1] timer: dw-apb: fix compiler warnings   Bin Meng
• [PATCH v5 0/5] add DM based reset driver for SiFive SoC's   Rick Chen
• master u-boot broken for HiFive Unleashed   Bin Meng
  • master u-boot broken for HiFive Unleashed   Atish Patra
  • master u-boot broken for HiFive Unleashed   Pragnesh Patel
    • master u-boot broken for HiFive Unleashed   Pragnesh Patel
      • master u-boot broken for HiFive Unleashed   Pragnesh Patel
      • master u-boot broken for HiFive Unleashed   Atish Patra
• Please pull u-boot-x86   Bin Meng
  • Please pull u-boot-x86   Tom Rini
• [PATCH v5 00/17] efi_loader: add capsule update support   AKASHI Takahiro
  • [PATCH v5 01/17] dfu: rename dfu_tftp_write() to dfu_write_by_name()   AKASHI Takahiro
  • [PATCH v5 02/17] dfu: modify an argument type for an address   AKASHI Takahiro
  • [PATCH v5 03/17] common: update: add a generic interface for FIT image   AKASHI Takahiro
  • [PATCH v5 04/17] dfu: export dfu_list   AKASHI Takahiro
  • [PATCH v5 05/17] efi_loader: add option to initialise EFI subsystem early   AKASHI Takahiro
  • [PATCH v5 06/17] efi_loader: add efi_create_indexed_name()   AKASHI Takahiro
  • [PATCH v5 07/17] efi_loader: define UpdateCapsule api   AKASHI Takahiro
  • [PATCH v5 08/17] efi_loader: capsule: add capsule_on_disk support   AKASHI Takahiro
  • [PATCH v5 09/17] efi_loader: capsule: add memory range capsule definitions   AKASHI Takahiro
  • [PATCH v5 10/17] efi_loader: capsule: support firmware update   AKASHI Takahiro
  • [PATCH v5 11/17] efi_loader: add firmware management protocol for FIT image   AKASHI Takahiro
  • [PATCH v5 12/17] dfu: add dfu_write_by_alt()   AKASHI Takahiro
  • [PATCH v5 13/17] efi_loader: add firmware management protocol for raw image   AKASHI Takahiro
  • [PATCH v5 14/17] cmd: add "efidebug capsule" command   AKASHI Takahiro
  • [PATCH v5 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
    • [PATCH v5 15/17] tools: add mkeficapsule command for UEFI capsule update   Heinrich Schuchardt
      • [PATCH v5 15/17] tools: add mkeficapsule command for UEFI capsule update   AKASHI Takahiro
  • [PATCH v5 16/17] test/py: add a test for uefi firmware update capsule of FIT image   AKASHI Takahiro
    • [PATCH v5 16/17] test/py: add a test for uefi firmware update capsule of FIT image   Heinrich Schuchardt
  • [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image   AKASHI Takahiro
    • [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image   Heinrich Schuchardt
      • [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image   AKASHI Takahiro
      • [PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image   Heinrich Schuchardt
  • [PATCH v5 00/17] efi_loader: add capsule update support   Heinrich Schuchardt
  • [PATCH v5 00/17] efi_loader: add capsule update support   AKASHI Takahiro
    • [PATCH v5 00/17] efi_loader: add capsule update support   AKASHI Takahiro
      • [PATCH v5 00/17] efi_loader: add capsule update support   Tom Rini
• [PATCH v2 00/13] Add support for USB host and peripheral bootmodes on am65x-idk   Faiz Abbas
  • [PATCH v2 01/13] spl: usb: Create an API spl_usb_load()   Faiz Abbas
  • [PATCH v2 02/13] spl: usb: Only init usb once   Faiz Abbas
  • [PATCH v2 03/13] armv7R: K3: am654: Use full malloc in SPL both pre and post reloc   Faiz Abbas
  • [PATCH v2 04/13] arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB   Faiz Abbas
  • [PATCH v2 05/13] arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config   Faiz Abbas
  • [PATCH v2 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes   Faiz Abbas
  • [PATCH v2 07/13] arm: mach-k3: am6_init: Add support for USB boot mode   Faiz Abbas
  • [PATCH v2 08/13] arm: dts: k3-am654-r5-base-board: Add USB0 nodes   Faiz Abbas
  • [PATCH v2 09/13] arm: dts: k3-am654-base-board: Add support for USB0 in SPL   Faiz Abbas
  • [PATCH v2 10/13] configs: am65x_evm: Add support for DFU related configs   Faiz Abbas
  • [PATCH v2 11/13] configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes   Faiz Abbas
  • [PATCH v2 12/13] configs: Add defconfig for USB DFU bootmode   Faiz Abbas
  • [PATCH v2 13/13] configs: Add new config for supporting USB mass storage boot   Faiz Abbas
  • [PATCH v2 00/13] Add support for USB host and peripheral bootmodes on am65x-idk   Lokesh Vutla
• [PATCH 06/13] arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes   Faiz Abbas
• [PATCH 1/6] riscv: Call spl_board_init_f() in the generic SPL board_init_f()   Bin Meng
  • [PATCH 2/6] riscv: sifive/fu540: spl: Drop our own version of board_init_f()   Bin Meng
    • [PATCH 2/6] riscv: sifive/fu540: spl: Drop our own version of board_init_f()   Rick Chen
    • [PATCH 2/6] riscv: sifive/fu540: spl: Drop our own version of board_init_f()   Pragnesh Patel
  • [PATCH 3/6] riscv: sifive/fu540: spl: Rename soc_spl_init()   Bin Meng
    • [PATCH 3/6] riscv: sifive/fu540: spl: Rename soc_spl_init()   Rick Chen
    • [PATCH 3/6] riscv: sifive/fu540: spl: Rename soc_spl_init()   Pragnesh Patel
  • [PATCH 4/6] riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC level   Bin Meng
    • [PATCH 4/6] riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC level   Rick Chen
    • [PATCH 4/6] riscv: sifive/fu540: kconfig: Move FU540 driver related options to the SoC level   Pragnesh Patel
  • [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR   Bin Meng
    • [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR   Leo Liang
    • [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR   Rick Chen
    • [PATCH 5/6] riscv: sifive/fu540: Drop NET_RANDOM_ETHADDR   Pragnesh Patel
  • [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c   Bin Meng
    • [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c   Leo Liang
    • [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c   Rick Chen
      • [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c   Bin Meng
    • [PATCH 6/6] riscv: sifive/fu540: Move SPL related functions to spl.c   Pragnesh Patel
  • [PATCH 1/6] riscv: Call spl_board_init_f() in the generic SPL board_init_f()   Rick Chen
  • [PATCH 1/6] riscv: Call spl_board_init_f() in the generic SPL board_init_f()   Pragnesh Patel
• [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice CHOTARD
  • [Uboot-stm32] [RESEND][PATCH] usb: host: dwc3-sti-glue: Fix ofnode_valid() parameter   Patrice CHOTARD
• [PATCH] Fix corner case in bad block table handling.   Richard Weinberger
  • [PATCH] Fix corner case in bad block table handling.   Tom Rini
• [PATCH v2 04/18] board: Introduce xenguest_arm64 board   Anastasiia Lukianenko
• [PATCH 0/6] Refactor Aspeed SoCs support   Chia-Wei, Wang
  • [PATCH 1/6] MAINTAINERS: Add maintainers for Aspeed SoCs   Chia-Wei, Wang
    • [PATCH 1/6] MAINTAINERS: Add maintainers for Aspeed SoCs   Tom Rini
  • [PATCH 2/6] aspeed: ast2500: Add lowlevel_init assembly   Chia-Wei, Wang
    • [PATCH 2/6] aspeed: ast2500: Add lowlevel_init assembly   Tom Rini
  • [PATCH 3/6] cosmetic: aspeed: ast2500: Rename board file   Chia-Wei, Wang
    • [PATCH 3/6] cosmetic: aspeed: ast2500: Rename board file   Tom Rini
  • [PATCH 4/6] include/configs: aspeed: Remove hardcoded variables   Chia-Wei, Wang
    • [PATCH 4/6] include/configs: aspeed: Remove hardcoded variables   Tom Rini
  • [PATCH 5/6] configs: evb-ast2500: Move BOOTCOMMAND from header to defconfig   Chia-Wei, Wang
    • [PATCH 5/6] configs: evb-ast2500: Move BOOTCOMMAND from header to defconfig   Tom Rini
  • [PATCH 6/6] configs: evb-ast2500: Convert to OF_SEPARATE   Chia-Wei, Wang
    • [PATCH 6/6] configs: evb-ast2500: Convert to OF_SEPARATE   Tom Rini
• sunxi_nand_spl reading zeros on Cubietruck   Zahari Zahariev
• [PATCH v3 5/6] sandbox: Enable memio operations in board_init   Pratyush Yadav
  • [PATCH v3 5/6] sandbox: Enable memio operations in board_init   Simon Glass
• [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup   Robert Marko
  • [PATCH 2/2] IPQ40xx: Add SMEM support   Robert Marko
  • [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup   Tom Rini
    • [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup   Robert Marko
      • [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup   Tom Rini
      • [PATCH 1/2] IPQ40xx: Add DRAM detection & FDT fixup   Robert Marko
• [PATCH v5 3/6] arm: provide a function for boards init code to modify MMU virtual-physical map   Marek Szyprowski
• [PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs   Anatolij Gustschin
  • [PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs   Soeren Moch
  • [PATCH] video: ipuv3: fix framebuffer base address init with multiple IPUs   Anatolij Gustschin
• [PATCH] Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x   Trommel, Kees (Contractor)
  • [PATCH] Link failure with CONFIG_SPL and CONFIG_I2C_MUX_PCA954x   Heiko Schocher
• [PATCH v2] board: Add support for iMX8QXP AI_ML board   Stefano Babic
  • [PATCH v2] board: Add support for iMX8QXP AI_ML board   Stefano Babic
    • [PATCH v2] board: Add support for iMX8QXP AI_ML board   Stefano Babic
• [PATCH v4 11/14] test: environment in ext4   Stephen Warren
  • [PATCH v4 11/14] test: environment in ext4   Tom Rini
    • [PATCH v4 11/14] test: environment in ext4   Stephen Warren
      • [PATCH v4 11/14] test: environment in ext4   Tom Rini
• chromebook_coral: build failure   Simon Glass
  • chromebook_coral: build failure   Wolfgang Wallner
• U-Boot POST Memory Test   Brownlie, Lewis
  • U-Boot POST Memory Test   Heinrich Schuchardt
  • U-Boot POST Memory Test   Brownlie, Lewis
• [PATCH 1/1] doc: qemu-mips build instructions   Daniel Schwierzeck
• [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Daniel Schwierzeck
  • [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Suneel Garapati
    • [PATCH v2 06/10] drivers: spi: Add SPI controller driver for Octeon   Stefan Roese
• [PATCH v2 01/10] gpio: octeon_gpio: Add GPIO controller driver for Octeon   Daniel Schwierzeck
• [PATCH 1/2] dm: core: Fix devfdt_get_addr_ptr return value   Ovidiu Panait
  • [PATCH 1/2] dm: core: Fix devfdt_get_addr_ptr return value   Simon Glass
    • [PATCH 1/2] dm: core: Fix devfdt_get_addr_ptr return value   Simon Glass
• [PATCH 2/2] test: dm: Add test case for devfdt_get_addr_ptr   Ovidiu Panait
  • [PATCH 2/2] test: dm: Add test case for devfdt_get_addr_ptr   Simon Glass
    • [PATCH 2/2] test: dm: Add test case for devfdt_get_addr_ptr   Simon Glass
• [PATCH 1/1] post: remove redundant condition   Heinrich Schuchardt
  • [PATCH 1/1] post: remove redundant condition   Simon Glass
• [PULL] u-boot-mips   Daniel Schwierzeck
  • [PULL] u-boot-mips   Tom Rini
• [PATCH 1/1] riscv: sifive: fu540: redundant initialization   Heinrich Schuchardt
  • [PATCH 1/1] riscv: sifive: fu540: redundant initialization   Bin Meng
  • [PATCH 1/1] riscv: sifive: fu540: redundant initialization   Pragnesh Patel
  • [PATCH 1/1] riscv: sifive: fu540: redundant initialization   Rick Chen
• [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Heinrich Schuchardt
  • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Bin Meng
    • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Heinrich Schuchardt
      • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Bin Meng
      • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Heinrich Schuchardt
      • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Bin Meng
      • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Andy Shevchenko
  • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Simon Glass
  • [PATCH 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Rick Chen
• [PATCH 1/1] riscv: remove redundant logical constraint.   Heinrich Schuchardt
  • [PATCH 1/1] riscv: remove redundant logical constraint.   Bin Meng
  • [PATCH 1/1] riscv: remove redundant logical constraint.   Rick Chen
• [PATCH] pci: layerscape: Fix spurious writes and panic   Michael Walle
  • [PATCH] pci: layerscape: Fix spurious writes and panic   Vladimir Oltean
  • [PATCH] pci: layerscape: Fix spurious writes and panic   Michael Walle
• [PATCH 4/6] stdio: Update to use compiler for Kconfig checks   Tom Rini
  • [PATCH 4/6] stdio: Update to use compiler for Kconfig checks   Tom Rini
    • [PATCH 4/6] stdio: Update to use compiler for Kconfig checks   Simon Glass
      • [PATCH 4/6] stdio: Update to use compiler for Kconfig checks   Tom Rini
      • [PATCH 4/6] stdio: Update to use compiler for Kconfig checks   Simon Glass
• [U-Boot] Pull request: u-boot-riscv/master 20200804   uboot at andestech.com
  • [U-Boot] Pull request: u-boot-riscv/master 20200804   Tom Rini
• [PATCH v4 08/17] board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo   Simon Glass
  • [PATCH v4 08/17] board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfo   Tom Rini
• [PATCH v5 1/5] cmd: bind: allow to bind driver with driver data   Simon Glass
• [PATCH v5 3/5] sandbox: dts: Add compatible string for bind-test node   Simon Glass
  • [PATCH v5 3/5] sandbox: dts: Add compatible string for bind-test node   Simon Glass
• [PATCH v5 5/5] doc: add bind/unbind command documentation   Simon Glass
  • [PATCH v5 5/5] doc: add bind/unbind command documentation   Simon Glass
• [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output   Simon Glass
  • [PATCH 1/1] cmd: bdinfo: cleanup phys_addr_t output   Tom Rini
• [PATCH 01/22] clk: check hw and hw->dev before dereference it   Simon Glass
  • [PATCH 01/22] clk: check hw and hw->dev before dereference it   Claudiu.Beznea at microchip.com
    • [PATCH 01/22] clk: check hw and hw->dev before dereference it   Simon Glass
      • [PATCH 01/22] clk: check hw and hw->dev before dereference it   Claudiu.Beznea at microchip.com
      • [PATCH 01/22] clk: check hw and hw->dev before dereference it   Simon Glass
      • [PATCH 01/22] clk: check hw and hw->dev before dereference it   Claudiu.Beznea at microchip.com
• [PATCH 02/22] clk: check pointer returned by dev_get_parent()   Simon Glass
  • [PATCH 02/22] clk: check pointer returned by dev_get_parent()   Claudiu.Beznea at microchip.com
• [PATCH 03/22] dm: core: add support for device re-parenting   Simon Glass
  • [PATCH 03/22] dm: core: add support for device re-parenting   Claudiu.Beznea at microchip.com
• [PATCH 04/22] clk: bind clk to new parent device   Simon Glass
  • [PATCH 04/22] clk: bind clk to new parent device   Claudiu.Beznea at microchip.com
• [PATCH 05/22] clk: do not disable clock if it is critical   Simon Glass
• [PATCH 06/22] clk: get clock pointer before proceeding   Simon Glass
  • [PATCH 06/22] clk: get clock pointer before proceeding   Claudiu.Beznea at microchip.com
• [PATCH 4/6] dm: sysreset: wait after reset message   Simon Glass
• [PATCH 1/3] gpio: at91: use dev_read_addr() to get base address   Masahiro Yamada
  • [PATCH 3/3] treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()   Masahiro Yamada
    • [PATCH 3/3] treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()   Simon Glass
      • [PATCH 3/3] treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()   Simon Glass
  • [PATCH 1/3] gpio: at91: use dev_read_addr() to get base address   Simon Glass
• [PATCH 2/3] ata: mvebu: use dev_read_addr() to get base address   Masahiro Yamada
  • [PATCH 2/3] ata: mvebu: use dev_read_addr() to get base address   Stefan Roese
    • [PATCH 2/3] ata: mvebu: use dev_read_addr() to get base address   Simon Glass
• [PATCH] ARM: dts: uniphier: resync DT with Linux 5.9-rc1   Masahiro Yamada
• Please pull u-boot-video   Anatolij Gustschin
  • Please pull u-boot-video   Tom Rini
• [PATCH] board: tbs2910: Fix video output with existing environments   Anatolij Gustschin
• [PATCH] ARM: imx: hab: panic on authentication failure   sbabic at denx.de
• [PATCH v3 3/6] gpio: mxc_gpio: add OF_PLATDATA support   sbabic at denx.de
• [PATCH v3 4/6] mmc: fsl_esdhc_imx: add CD support when OF_PLATDATA is enabled   sbabic at denx.de
• [PATCH] arm: imx6q: pcm058: Rework SPI NOR configuration   sbabic at denx.de
• [PATCH v3 5/6] drivers: rename more drivers to match compatible string   sbabic at denx.de
• [PATCH v3 1/6] mmc: fsl_esdhc_imx: rename driver name to match ll_entry   sbabic at denx.de
• [PATCH v1] configs: pico-imx6: convert ethernet function to DM_ETH   sbabic at denx.de
• [PATCH v2] imx: Add MYiR Tech MYS-6ULX support   sbabic at denx.de
• [PATCH v3 2/6] mmc: fsl_esdhc_imx: add OF_PLATDATA support   sbabic at denx.de
• [PATCH v3 6/6] mx6cuboxi: enable OF_PLATDATA   sbabic at denx.de
• [PATCH] imx8m: enlarge CONFIG_SYS_BOOTM_LEN   sbabic at denx.de
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200804   Stefano Babic
  • [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200804   Tom Rini
• [PATCH 1/2] mmc: remove duplicate mmc_get_env_dev() implementations   David Woodhouse
  • [PATCH 2/2] env/ext4.c: allow loading from an EXT4 partition on the MMC boot device   David Woodhouse
• [PATCH 1/4] firmware: add new driver for SCMI firmwares   Etienne Carriere
  • [PATCH 1/4] firmware: add new driver for SCMI firmwares   Simon Glass
• [PATCH] ddr: socfpga: stratix10: Use phys_size_t for memory size   tien.fong.chee at intel.com
  • [PATCH] ddr: socfpga: stratix10: Use phys_size_t for memory size   Tan, Ley Foon
  • [PATCH] ddr: socfpga: stratix10: Use phys_size_t for memory size   Tan, Ley Foon
• [PATCH 1/1] cmd: exception: unaligned data access on RISC-V   Heinrich Schuchardt
  • [PATCH 1/1] cmd: exception: unaligned data access on RISC-V   Rick Chen
    • [PATCH 1/1] cmd: exception: unaligned data access on RISC-V   Heinrich Schuchardt
      • [PATCH 1/1] cmd: exception: unaligned data access on RISC-V   Rick Chen
      • [PATCH 1/1] cmd: exception: unaligned data access on RISC-V   Leo Liang
• [PATCH v2 00/12] Add label to pcie nodes   Wasim Khan
  • [PATCH v2 01/12] configs: lx2160a: Enable CONFIG_PCIE_LAYERSCAPE_GEN4   Wasim Khan
  • [PATCH v2 02/12] pci: layerscape: Print pcie controller number starting from 1   Wasim Khan
  • [PATCH v2 02/12] pci: layerscape: Print pcie controller number starting from 1   Wasim Khan
  • [PATCH v2 03/12] pci: ls_pcie_g4: Print pcie controller number starting from 1   Wasim Khan
  • [PATCH v2 04/12] arm: dts: lx2160a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 05/12] arm: dts: ls1046a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 06/12] arm: dts: ls2080a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 07/12] arm: dts: ls1088a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 08/12] arm: dts: ls1012a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 09/12] arm: dts: ls1043a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 10/12] arm: dts: ls1028a: add label to pcie nodes in dts   Wasim Khan
  • [PATCH v2 11/12] pci: layerscape: Add size check for config resource   Wasim Khan
  • [PATCH v2 12/12] pci: ls_pcie_g4: Add size check for config resource   Wasim Khan
• [PATCH] armv8: ls1012a: correction in delay implementation   Chaitanya Sakinam
  • [PATCH] armv8: ls1012a: Avoid resource leak   Chaitanya Sakinam
• [PATCH v1 15/24] ata: ahci: Add BAR index quirk for Cavium PCI SATA device   Stefan Roese
• [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
  • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Simon Glass
    • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Simon Glass
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Tom Rini
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Tom Rini
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Simon Glass
      • [PATCH v1 06/24] pci: pci-uclass: Add multi entry support for memory regions   Tom Rini
• [RESEND PATCH 1/7] Convert CONFIG_SPLASH_SCREEN et al to Kconfig   Simon Glass
• [PATCH v2 15/18] arm: dts: k3-j7200: Add dts support   Vignesh Raghavendra
• crash with CONFIG_OF_LIVE   Frank Wunderlich
  • Aw: crash with CONFIG_OF_LIVE   Frank Wunderlich
    • Aw: crash with CONFIG_OF_LIVE   Frank Wunderlich
• [PATCH 01/31] spi: Allow separate control of SPI_FLASH_TINY for SPL/TPL   Tom Rini
• [PATCH 02/31] mtd: spi-nor: Tidy up error handling / debug code   Tom Rini
• [PATCH 03/31] wdt: Drop dm.h header file   Tom Rini
• [PATCH 04/31] mtd: spi-mem: Drop dm.h header file   Tom Rini
• [PATCH 05/31] mtd: spi: Drop SPI_XFER_MMAP*   Tom Rini
• [PATCH 06/31] dm: core: Drop dm.h header file from dm-demo.h   Tom Rini
• [PATCH 07/31] dm: core: Drop header files from dm/test.h   Tom Rini
• [PATCH 08/31] fs: fs-loader: Drop dm.h header file   Tom Rini
• [PATCH 09/31] net: Drop dm.h header file from phy.h   Tom Rini
• [PATCH 10/31] sf: Drop dm.h header file from spi_flash.h   Tom Rini
• [PATCH 11/31] thermal: Drop dm.h header file   Tom Rini
• [PATCH 12/31] w1: Drop dm.h header file   Tom Rini
• [PATCH 13/31] efi: Tidy up header includes   Tom Rini
• [PATCH 14/31] power: Tidy up inclusion of regulator_common.h   Tom Rini
• [PATCH 15/31] mmc: Drop duplicate dm.h inclusion   Tom Rini
• [PATCH 16/31] spi: Drop duplicate dm.h inclusion   Tom Rini
• [PATCH 17/31] ti: am654: Drop duplicate dm.h inclusion   Tom Rini
• [PATCH 18/31] liebherr: Drop duplicate dm.h inclusion   Tom Rini
• [PATCH 19/31] pci: Drop dm.h inclusion from header file   Tom Rini
• [PATCH 20/31] mediatek: Drop dm.h header file   Tom Rini
• [PATCH 21/31] mscc: Drop dm.h header file   Tom Rini
• [PATCH 22/31] adc: Drop dm.h header file   Tom Rini
• [PATCH 23/31] nand: Drop dm.h header file   Tom Rini
• [PATCH 24/31] ufs: Drop dm.h header file   Tom Rini
• [PATCH 25/31] usb: Drop dm.h header file   Tom Rini
• [PATCH 26/31] clk: Drop dm.h header file in clk-provider.h   Tom Rini
• [PATCH 27/31] net: Drop dm.h header file in eth_phy.h   Tom Rini
• [PATCH 28/31] net: Drop duplicate include of dm.h in pcnet.c   Tom Rini
• [PATCH 29/31] dm: core: Guard against including dm.h in header files   Tom Rini
• [PATCH 30/31] patman: Fix up the test comments   Tom Rini
• [PATCH 31/31] checkpatch: Don't allow common.h and dm.h in headers   Tom Rini
• [PATCH v2 18/18] configs: j7200_evm_a72: Add Initial support   Vignesh Raghavendra
• [PATCH v1] test/py: Add test support for three stage boot   Liu, Yan
  • [PATCH v1] test/py: Add test support for three stage boot   Tom Rini
• [PATCH] tests: support mkfs.ext4 without metadata_csum   Stephen Warren
  • [PATCH] tests: support mkfs.ext4 without metadata_csum   Tom Rini
• [PATCH] ddr: socfpga: Fix integer overflow that caused DDR size mismatched   tien.fong.chee at intel.com
  • [PATCH] ddr: socfpga: Fix integer overflow that caused DDR size mismatched   Tan, Ley Foon
• [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support   Stefan Roese
  • [PATCH v2 0/4] usb: xhci: Prepare xHCI driver for MIPS Octeon big-endian support   Marek Vasut
• [PATCH v3] fsl-layerscape: enable dwc3 snooping feature   Ran Wang
• [PULL] u-boot-sh/master   Marek Vasut
  • [PULL] u-boot-sh/master   Tom Rini
• [PATCH v2 0/8] regmap: Add managed API, regmap fields, regmap config   Pratyush Yadav
  • [PATCH v2 0/8] regmap: Add managed API, regmap fields, regmap config   Simon Glass
• [PATCH v2 0/2] reset: Add a managed API   Pratyush Yadav
  • [PATCH v2 0/2] reset: Add a managed API   Simon Glass
• [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Chee Hong Ang
  • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
    • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tan, Ley Foon
      • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
      • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tan, Ley Foon
      • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
      • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tan, Ley Foon
      • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
  • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Westergreen, Dalon
    • [PATCH v1] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tan, Ley Foon
• [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Rasmus Villemoes
  • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Stefan Roese
    • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Tom Rini
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   David Woodhouse
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Tom Rini
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   David Woodhouse
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   David Woodhouse
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Tom Rini
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   David Woodhouse
      • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Tom Rini
  • [PATCH] Convert CONFIG_SYS_MMC_ENV_DEV et al to Kconfig   Tom Rini
• [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets   Vignesh Raghavendra
  • [PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets   Lokesh Vutla
• [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
  • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Bin Meng
  • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Rick Chen
    • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
      • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Bin Meng
      • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
  • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Atish Patra
    • [PATCH] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
• [PATCH v1 03/24] pci: pci-uclass: Dynamically allocate the PCI regions   Stefan Roese
• [PATCH v1] spi: cadence-qspi: Fix QSPI write issues   Chee Hong Ang
  • [PATCH v1] spi: cadence-qspi: Fix QSPI write issues   Tan, Ley Foon
    • [PATCH v1] spi: cadence-qspi: Fix QSPI write issues   Tan, Ley Foon
• [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support   Chee Hong Ang
  • [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support   Tan, Ley Foon
    • [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support   Ang, Chee Hong
      • [PATCH v1] sysreset: socfpga: agilex: Enable sysreset support   Tan, Ley Foon
• [PATCH v1] spi: cadence_qspi: Probe fail if QSPI clock is not set   Chee Hong Ang
  • [PATCH v1] spi: cadence_qspi: Probe fail if QSPI clock is not set   Vignesh Raghavendra
    • [PATCH v1] spi: cadence_qspi: Probe fail if QSPI clock is not set   Ang, Chee Hong
• [PATCH v1] configs: socfpga: soc64: Avoid SPL enter infinite loop during exception   Chee Hong Ang
  • [PATCH v1] configs: socfpga: soc64: Avoid SPL enter infinite loop during exception   Tan, Ley Foon
• [PATCH 0/8] xilinx: zynqmp: Silicon name cleanup   Michal Simek
  • [PATCH 2/8] xilinx: zynqmp: merge firmware calls for EL2 and EL3   Michal Simek
  • [PATCH 3/8] xilinx: zynqmp: get chip ID using firmware driver   Michal Simek
  • [PATCH 4/8] xilinx: zynqmp: get chip ID at EL3   Michal Simek
  • [PATCH 5/8] xilinx: zynqmp: remove chip_id function   Michal Simek
  • [PATCH 6/8] xilinx: zynqmp: refactor silicon name function   Michal Simek
    • [PATCH 6/8] xilinx: zynqmp: refactor silicon name function   Michal Simek
  • [PATCH 7/8] xilinx: zynqmp: fix incorrect map not align with IPI HW   Michal Simek
  • [PATCH 8/8] xilinx: zynqmp: Remove one static variable   Michal Simek
    • [PATCH 8/8] xilinx: zynqmp: Remove one static variable   Michal Simek
  • [PATCH 0/8] xilinx: zynqmp: Silicon name cleanup   Michal Simek
• [PATCH 1/8] xilinx: zynqmp: synchronize firmware call return payload   Michal Simek
• [PATCH] xilinx: versal: Enable i2c misc eeprom driver   Michal Simek
  • [PATCH] xilinx: versal: Enable i2c misc eeprom driver   Michal Simek
• [PATCH] xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIG   Michal Simek
  • [PATCH] xilinx: Add support for ENV_VARS_UBOOT_RUNTIME_CONFIG   Michal Simek
• [PATCH] xilinx: Change logic around zynq_board_read_rom_ethaddr()   Michal Simek
  • [PATCH] xilinx: Change logic around zynq_board_read_rom_ethaddr()   Michal Simek
• [PATCH] xilinx: Check return value from variable setup   Michal Simek
  • [PATCH] xilinx: Check return value from variable setup   Michal Simek
• [PATCH v2 0/2] Enable sysreset support for SoCFPGA SoC64 platforms   Chee Hong Ang
  • [PATCH v2 1/2] sysreset: socfpga: soc64: Rename SYSRESET SoCFPGA driver for S10 to SoC64   Chee Hong Ang
    • [PATCH v2 1/2] sysreset: socfpga: soc64: Rename SYSRESET SoCFPGA driver for S10 to SoC64   Tan, Ley Foon
  • [PATCH v2 2/2] sysreset: socfpga: agilex: Enable sysreset support   Chee Hong Ang
    • [PATCH v2 2/2] sysreset: socfpga: agilex: Enable sysreset support   Tan, Ley Foon
• [PATCH] log: Allow LOG_DEBUG to always enable log output   Tom Rini
  • [PATCH] log: Allow LOG_DEBUG to always enable log output   Heinrich Schuchardt
    • [PATCH] log: Allow LOG_DEBUG to always enable log output   Tom Rini
      • [PATCH] log: Allow LOG_DEBUG to always enable log output   Heinrich Schuchardt
      • [PATCH] log: Allow LOG_DEBUG to always enable log output   Tom Rini
      • [PATCH] log: Allow LOG_DEBUG to always enable log output   Simon Glass
      • [PATCH] log: Allow LOG_DEBUG to always enable log output   Tom Rini
      • [PATCH] log: Allow LOG_DEBUG to always enable log output   Heinrich Schuchardt
      • [PATCH] log: Allow LOG_DEBUG to always enable log output   Tom Rini
• [PATCH] board: atmel: common: introduce at91_set_eth1addr for second interface   Eugen Hristev
• [PATCH] firmware: psci: Do not bind driver if U-Boot runs in EL3   Michal Simek
  • [PATCH] firmware: psci: Do not bind driver if U-Boot runs in EL3   Michal Simek
• [PATCH v1] arm: socfpga: soc64: Check FPGA Config status register before bridge reset   Chee Hong Ang
  • [PATCH v1] arm: socfpga: soc64: Check FPGA Config status register before bridge reset   Tan, Ley Foon
• [PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2   Stefan Roese
  • [PATCH] spi: octeon_spi: Use a fixed 100MHz input clock on Octeon TX2   Stefan Roese
• [PATCH v1 0/2] Print reset information in SPL   Chee Hong Ang
  • [PATCH v1 1/2] arm: socfpga: soc64: Add SDM triggered warm reset bit mask   Chee Hong Ang
    • [PATCH v1 1/2] arm: socfpga: soc64: Add SDM triggered warm reset bit mask   Tan, Ley Foon
  • [PATCH v1 2/2] arm: socfpga: soc64: Show reset state in SPL   Chee Hong Ang
    • [PATCH v1 2/2] arm: socfpga: soc64: Show reset state in SPL   Tan, Ley Foon
• [PATCH v1 16/24] pci: Add PCI controller driver for OcteonTX / TX2   Stefan Roese
• [PATCH] env: nowhere: Implement .load callback   Marek Vasut
  • [PATCH] env: nowhere: Implement .load callback   Tom Rini
• [PATCH] ARM: imx: ddr: Add deskew register programming   Marek Vasut
  • [PATCH] ARM: imx: ddr: Add deskew register programming   sbabic at denx.de
• [PATCH] ARM: imx: soc: Add reset for non-DM case   Marek Vasut
• [PATCH 1/4] ARM: imx: Add bmode support for iMX7   Marek Vasut
  • [PATCH 2/4] ARM: imx: Add support for switching primary/secondary boot mode to bmode   Marek Vasut
    • [PATCH 2/4] ARM: imx: Add support for switching primary/secondary boot mode to bmode   Stefano Babic
    • [PATCH 2/4] ARM: imx: Add support for switching primary/secondary boot mode to bmode   sbabic at denx.de
  • [PATCH 3/4] ARM: imx: Add support for reading out the primary/secondary bmode   Marek Vasut
    • [PATCH 3/4] ARM: imx: Add support for reading out the primary/secondary bmode   Stefano Babic
    • [PATCH 3/4] ARM: imx: Add support for reading out the primary/secondary bmode   sbabic at denx.de
  • [PATCH 4/4] ARM: imx: Add support for reading out the primary/secondary bmode to MX7   Marek Vasut
    • [PATCH 4/4] ARM: imx: Add support for reading out the primary/secondary bmode to MX7   Stefano Babic
    • [PATCH 4/4] ARM: imx: Add support for reading out the primary/secondary bmode to MX7   sbabic at denx.de
  • [PATCH 1/4] ARM: imx: Add bmode support for iMX7   Stefano Babic
    • [PATCH 1/4] ARM: imx: Add bmode support for iMX7   Marek Vasut
      • [PATCH 1/4] ARM: imx: Add bmode support for iMX7   Stefano Babic
      • [PATCH 1/4] ARM: imx: Add bmode support for iMX7   Marek Vasut
  • [PATCH 1/4] ARM: imx: Add bmode support for iMX7   sbabic at denx.de
• I2C on imx8qm - Failed to enable ipg clk   Oliver Graute
  • I2C on imx8qm - Failed to enable ipg clk   Anatolij Gustschin
    • I2C on imx8qm - Failed to enable ipg clk   Oliver Graute
• [PATCH v1 22/24] watchdog: Add reset support for OcteonTX / TX2   Stefan Roese
• [PATCH v1] arm: socfpga: Use DM watchdog timer   Chee Hong Ang
  • [PATCH v1] arm: socfpga: Use DM watchdog timer   Tan, Ley Foon
• sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   André Przywara
  • sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   Simon Glass
    • sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   André Przywara
      • sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   Simon Glass
• [PATCH v2 00/21] clk: at91: add sama7g5 support   Claudiu Beznea
  • [PATCH v2 02/21] dm: core: add support for device re-parenting   Claudiu Beznea
    • [PATCH v2 02/21] dm: core: add support for device re-parenting   Simon Glass
  • [PATCH v2 03/21] clk: bind clk to new parent device   Claudiu Beznea
    • [PATCH v2 03/21] clk: bind clk to new parent device   Claudiu.Beznea at microchip.com
      • [PATCH v2 03/21] clk: bind clk to new parent device   Simon Glass
  • [PATCH v2 04/21] clk: do not disable clock if it is critical   Claudiu Beznea
    • [PATCH v2 04/21] clk: do not disable clock if it is critical   Simon Glass
  • [PATCH v2 05/21] clk: get clock pointer before proceeding   Claudiu Beznea
    • [PATCH v2 05/21] clk: get clock pointer before proceeding   Simon Glass
  • [PATCH v2 06/21] clk: at91: add pre-requisite headers for AT91 clock architecture   Claudiu Beznea
  • [PATCH v2 07/21] clk: at91: pmc: add helpers for clock drivers   Claudiu Beznea
  • [PATCH v2 08/21] clk: at91: move clock code to compat.c   Claudiu Beznea
  • [PATCH v2 09/21] clk: at91: sckc: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 10/21] clk: at91: clk-main: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 11/21] clk: at91: sam9x60-pll: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 12/21] clk: at91: clk-master: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 13/21] clk: at91: clk-master: add support for sama7g5   Claudiu Beznea
  • [PATCH v2 14/21] clk: at91: clk-utmi: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 15/21] clk: at91: clk-utmi: add support for sama7g5   Claudiu Beznea
  • [PATCH v2 16/21] clk: at91: clk-programmable: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 17/21] clk: at91: clk-system: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 18/21] clk: at91: clk-peripheral: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 19/21] clk: at91: clk-generic: add driver compatible with ccf   Claudiu Beznea
  • [PATCH v2 20/21] clk: at91: pmc: add generic clock ops   Claudiu Beznea
  • [PATCH v2 21/21] clk: at91: sama7g5: add clock support   Claudiu Beznea
• [PATCH v2 01/21] clk: check hw and hw->dev before dereference it   Claudiu Beznea
  • [PATCH v2 01/21] clk: check hw and hw->dev before dereference it   Simon Glass
• [PATCH 1/1] test: py: test_shell_run() with CONFIG_HUSH_PARSER=n   Heinrich Schuchardt
  • [PATCH 1/1] test: py: test_shell_run() with CONFIG_HUSH_PARSER=n   Tom Rini
• [PATCH] riscv: Remove unused define in maix header   Sean Anderson
  • [PATCH] riscv: Remove unused define in maix header   Heinrich Schuchardt
  • [PATCH] riscv: Remove unused define in maix header   Bin Meng
• [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI   Heinrich Schuchardt
  • [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI   Heinrich Schuchardt
    • [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI   Simon Glass
      • [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman - BREAKS NETWORK ON SUNXI   Simon Glass
      • sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   Samuel Holland
      • sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   Simon Glass
      • sunxi/arm64 build broken (was: [PATCH v4 12/27] x86: Makefile: Drop explicit targets built by binman)   Simon Glass
• [PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
  • [PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
    • [PATCH v2 01/19] board: ti: board_detect: Add stub functions for EEPROM detection apis   Lokesh Vutla
    • [PATCH v2 02/19] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined   Lokesh Vutla
    • [PATCH v2 03/19] board: ti: j721e: Update fdt fixup logic for interconnect nodes   Lokesh Vutla
    • [PATCH v2 04/19] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled   Lokesh Vutla
    • [PATCH v2 05/19] arm: mach-k3: Move mmr_unlock to a common location   Lokesh Vutla
    • [PATCH v2 06/19] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Lokesh Vutla
      • [PATCH v2 06/19] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Suman Anna
    • [PATCH v2 07/19] arm: mach-k3: j721e: Add detection for j721e   Lokesh Vutla
    • [PATCH v2 08/19] arm: mach-k3: j721e: Fix unlocking control module registers   Lokesh Vutla
    • [PATCH v2 09/19] arm: mach-k3: j7200: Add support for SOC detection   Lokesh Vutla
    • [PATCH v2 10/19] arm: mach-k3: j7200: Add support for storing extended boot info from ROM   Lokesh Vutla
    • [PATCH v2 11/19] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw   Lokesh Vutla
    • [PATCH v2 12/19] board: ti: j7200: Introduce support for j7200 build targets   Lokesh Vutla
      • [PATCH v2 12/19] board: ti: j7200: Introduce support for j7200 build targets   Suman Anna
      • [PATCH v2 12/19] board: ti: j7200: Introduce support for j7200 build targets   Suman Anna
    • [PATCH v2 13/19] board: ti: j7200: Add board detection support for j7200   Lokesh Vutla
    • [PATCH v2 14/19] ram: k3-j721e: Relax version checks for memory controller   Lokesh Vutla
    • [PATCH v2 15/19] soc: soc_ti_k3: Add device identification for J7200 SoC   Lokesh Vutla
      • [PATCH v2 15/19] soc: soc_ti_k3: Add device identification for J7200 SoC   Suman Anna
    • [PATCH v2 16/19] arm: dts: k3-j7200: Add dts support   Lokesh Vutla
    • [PATCH v2 17/19] arm: dts: k3-j7200: Add R5 specific dts support   Lokesh Vutla
    • [PATCH v2 18/19] configs: j7200_evm_r5: Add initial support   Lokesh Vutla
      • [PATCH v2 18/19] configs: j7200_evm_r5: Add initial support   Vignesh Raghavendra
    • [PATCH v2 19/19] configs: j7200_evm_a72: Add Initial support   Lokesh Vutla
      • [PATCH v2 19/19] configs: j7200_evm_a72: Add Initial support   Suman Anna
    • [PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
• [PATCH v2 01/19] board: ti: board_detect: Add stub functions for EEPROM detection apis   Lokesh Vutla
• [PATCH 1/7] wdt: dw: Switch to using fls for log2   Sean Anderson
  • [PATCH 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if   Sean Anderson
    • [PATCH 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if   Heinrich Schuchardt
  • [PATCH 3/7] wdt: dw: Fix clock rate being off by 1000   Sean Anderson
    • [PATCH 3/7] wdt: dw: Fix clock rate being off by 1000   Simon Glass
  • [PATCH 4/7] wdt: dw: Enable the clock before using it   Sean Anderson
    • [PATCH 4/7] wdt: dw: Enable the clock before using it   Simon Glass
  • [PATCH 5/7] wdt: dw: Free the clock on error   Sean Anderson
    • [PATCH 5/7] wdt: dw: Free the clock on error   Simon Glass
  • [PATCH 6/7] riscv: Add watchdog bindings for the k210   Sean Anderson
  • [PATCH 7/7] riscv: Enable watchdog for the k210   Sean Anderson
  • [PATCH 1/7] wdt: dw: Switch to using fls for log2   Heinrich Schuchardt
    • [PATCH 1/7] wdt: dw: Switch to using fls for log2   Sean Anderson
• [PATCH 0/4] binman: Add support for Python installation   Simon Glass
  • [PATCH 1/4] binman: Move GetEntryModules() to control   Simon Glass
    • [PATCH 1/4] binman: Move GetEntryModules() to control   Simon Glass
  • [PATCH 2/4] binman: Correct some import statements   Simon Glass
    • [PATCH 2/4] binman: Correct some import statements   Simon Glass
  • [PATCH 3/4] dtoc: Add a setup script for Python   Simon Glass
    • [PATCH 3/4] dtoc: Add a setup script for Python   Simon Glass
  • [PATCH 4/4] binman: Add a setup script for Python   Simon Glass
    • [PATCH 4/4] binman: Add a setup script for Python   Simon Glass
• [PATCH] net: dwc_eth_qos: add Kconfig option to select supported configuration   Tom Rini
• [PATCH v2] net: ping: reset stored IP address   Tom Rini
• [PATCH v3] fs/fat/fat.c: Do not perform zero block reads if there are no blocks left   Tom Rini
• [PATCH v3] cmd: add clone command   Tom Rini
• [PATCH] psci: put psci_method in .data section if EFI_LOADER is not enabled   Tom Rini
• [PATCH v5] net: tftp: Add client support for RFC 7440   Tom Rini
• [PATCHv2] lmb/bdinfo: dump lmb info via bdinfo   Tom Rini
• [PATCH v4 1/2] arm: move CONFIG_PREBOOT="usb start" to KConfig   Tom Rini
• [PATCH] fixdep: fix coding style in previous fix   Tom Rini
• [PATCH] dt-bindings: Sync include/dt-bindings/phy/phy.h from Linux   Tom Rini
• [PATCH] Makefile.lib: Build all DTS with -@ if OF_LIBFDT_OVERLAY is enabled   Tom Rini
• [PATCH] pinctrl: aspeed: Fix Kconfig entry indentation   Tom Rini
• [PATCH 1/1] doc: move Clang documentation to HTML   Tom Rini
• [PATCH v2 1/1] arm: Add SPL build check to SPL early bss clear   Tom Rini
• [PATCH v2] fit_image: Use calloc() to fix reproducibility issue   Tom Rini
• [PATCH] cmd: bootz: fix device-tree overlap test   Tom Rini
• [PATCH] ARM: add Kconfig option for PSCI 0.1   Tom Rini
• [PATCH] Dockerfile: Enable SH4 QEMU build   Marek Vasut
  • [PATCH] Dockerfile: Enable SH4 QEMU build   Tom Rini
• [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options   Marek Vasut
  • [PATCH] travis-ci: Add SH4 r2dplus machine with various PCI ethernet options   Marek Vasut
• [PATCH] sun50i: a64: A64-Teres-I board detect builtin keyboard   Jonas Smedegaard
• [PATCH v2] arm: socfpga: soc64: Check FPGA Config status register before bridge reset   Chee Hong Ang
  • [PATCH v2] arm: socfpga: soc64: Check FPGA Config status register before bridge reset   Tan, Ley Foon
• [PATCH v2] arm: socfpga: Use DM watchdog timer   Chee Hong Ang
  • [PATCH v2] arm: socfpga: Use DM watchdog timer   Tan, Ley Foon
• [PATCH] arm64: Layerscape: Survive LPI one-way reset workaround   Zhiqiang Hou
• [PATCH v2] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
  • [PATCH v2] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Rick Chen
    • [PATCH v2] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
• [PATCH] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5   Ooi, Joyce
  • [PATCH] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5   Marek Vasut
    • [PATCH] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5   Ooi, Joyce
• [RESEND PATCH v2 00/18] Add new board: Xen guest for ARM64   Anastasiia Lukianenko
  • [RESEND PATCH v2 01/18] Add MIT License   Anastasiia Lukianenko
    • [RESEND PATCH v2 01/18] Add MIT License   Tom Rini
  • [RESEND PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Anastasiia Lukianenko
    • [RESEND PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Tom Rini
  • [RESEND PATCH v2 03/18] xen: Add essential and required interface headers   Anastasiia Lukianenko
    • [RESEND PATCH v2 03/18] xen: Add essential and required interface headers   Tom Rini
  • [RESEND PATCH v2 04/18] board: Introduce xenguest_arm64 board   Anastasiia Lukianenko
    • [RESEND PATCH v2 04/18] board: Introduce xenguest_arm64 board   Tom Rini
  • [RESEND PATCH v2 05/18] xen: Port Xen hypervisor related code from mini-os   Anastasiia Lukianenko
    • [RESEND PATCH v2 05/18] xen: Port Xen hypervisor related code from mini-os   Tom Rini
  • [RESEND PATCH v2 06/18] xen: Port Xen event channel driver from mini-os   Anastasiia Lukianenko
    • [RESEND PATCH v2 06/18] xen: Port Xen event channel driver from mini-os   Tom Rini
  • [RESEND PATCH v2 07/18] serial: serial_xen: Add Xen PV serial driver   Anastasiia Lukianenko
    • [RESEND PATCH v2 07/18] serial: serial_xen: Add Xen PV serial driver   Tom Rini
  • [RESEND PATCH v2 08/18] linux/compat.h: Add wait_event_timeout macro   Anastasiia Lukianenko
    • [RESEND PATCH v2 08/18] linux/compat.h: Add wait_event_timeout macro   Tom Rini
  • [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation   Anastasiia Lukianenko
    • [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation   Tom Rini
    • [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation   Andy Shevchenko
    • [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation   Artem Mygaiev
      • [RESEND PATCH v2 09/18] lib: sscanf: add sscanf implementation   Tom Rini
  • [RESEND PATCH v2 10/18] xen: Port Xen bus driver from mini-os   Anastasiia Lukianenko
    • [RESEND PATCH v2 10/18] xen: Port Xen bus driver from mini-os   Tom Rini
  • [RESEND PATCH v2 11/18] xen: Port Xen grant table driver from mini-os   Anastasiia Lukianenko
    • [RESEND PATCH v2 11/18] xen: Port Xen grant table driver from mini-os   Tom Rini
  • [RESEND PATCH v2 12/18] xen: pvblock: Add initial support for para-virtualized block driver   Anastasiia Lukianenko
    • [RESEND PATCH v2 12/18] xen: pvblock: Add initial support for para-virtualized block driver   Tom Rini
  • [RESEND PATCH v2 13/18] xen: pvblock: Enumerate virtual block devices   Anastasiia Lukianenko
    • [RESEND PATCH v2 13/18] xen: pvblock: Enumerate virtual block devices   Tom Rini
  • [RESEND PATCH v2 14/18] xen: pvblock: Read XenStore configuration and initialize   Anastasiia Lukianenko
    • [RESEND PATCH v2 14/18] xen: pvblock: Read XenStore configuration and initialize   Tom Rini
  • [RESEND PATCH v2 15/18] xen: pvblock: Implement front-back protocol and do IO   Anastasiia Lukianenko
    • [RESEND PATCH v2 15/18] xen: pvblock: Implement front-back protocol and do IO   Tom Rini
  • [RESEND PATCH v2 16/18] xen: pvblock: Print found devices indices   Anastasiia Lukianenko
    • [RESEND PATCH v2 16/18] xen: pvblock: Print found devices indices   Tom Rini
  • [RESEND PATCH v2 17/18] board: xen: De-initialize before jumping to Linux   Anastasiia Lukianenko
    • [RESEND PATCH v2 17/18] board: xen: De-initialize before jumping to Linux   Tom Rini
  • [RESEND PATCH v2 18/18] doc: xen: Add Xen guest ARM64 board documentation   Anastasiia Lukianenko
    • [RESEND PATCH v2 18/18] doc: xen: Add Xen guest ARM64 board documentation   Tom Rini
  • [RESEND PATCH v2 00/18] Add new board: Xen guest for ARM64   Oleksandr Andrushchenko
• [PATCH] drivers: usb: Fix config indentation   Ruben Di Battista
  • [PATCH] drivers: usb: Fix config indentation   Tom Rini
• [PATCH v2] cmd: exception: unaligned data access on RISC-V   Heinrich Schuchardt
  • [PATCH v2] cmd: exception: unaligned data access on RISC-V   Rick Chen
    • [PATCH v2] cmd: exception: unaligned data access on RISC-V   Heinrich Schuchardt
      • [PATCH v2] cmd: exception: unaligned data access on RISC-V   Rick Chen
• RISC-V: crash in riscv_get_time()   Heinrich Schuchardt
  • RISC-V: crash in riscv_get_time()   Rick Chen
    • RISC-V: crash in riscv_get_time()   Heinrich Schuchardt
      • RISC-V: crash in riscv_get_time()   Bin Meng
      • RISC-V: crash in riscv_get_time()   Heinrich Schuchardt
      • RISC-V: crash in riscv_get_time()   Bin Meng
      • RISC-V: crash in riscv_get_time()   Heinrich Schuchardt
• Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
  • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
    • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Tan, Ley Foon
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Dinh Nguyen
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ralph Siemsen
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Marek Vasut
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Ralph Siemsen
      • Revert "ARM: socfpga: Remove socfpga_sdram_apply_static_cfg()   Wolfgang Grandegger
• [PATCH 1/5] arm: mvebu: Add CRS305-1G-4S Bit board   Stefan Roese
  • [PATCH 1/5] arm: mvebu: Add CRS305-1G-4S Bit board   Stefan Roese
• [PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board   Stefan Roese
  • [PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board   Stefan Roese
• [PATCH 3/5] arm: mvebu: Add CRS328-4C-20S-4S board   Stefan Roese
  • [PATCH 3/5] arm: mvebu: Add CRS328-4C-20S-4S board   Stefan Roese
• [PATCH 4/5] arm: mvebu: crs3xx-98dx3236: Add a maintainer   Stefan Roese
  • [PATCH 4/5] arm: mvebu: crs3xx-98dx3236: Add a maintainer   Stefan Roese
• [PATCH 5/5] arm: mvebu: Update CRS305-1G-4S board flash layout   Stefan Roese
  • [PATCH 5/5] arm: mvebu: Update CRS305-1G-4S board flash layout   Stefan Roese
• [PATCH] mvebu: bubt: Drop dead code   Stefan Roese
  • [PATCH] mvebu: bubt: Drop dead code   Stefan Roese
• [PATCH] cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION   Stefan Roese
  • [PATCH] cmd: mvebu/bubt: Drop unused SPI_FLASH_PROTECTION   Stefan Roese
• [PATCH] Azure/Travis: Update to latest Docker image   Tom Rini
  • [PATCH] Azure/Travis: Update to latest Docker image   Tom Rini
• [ANN] U-Boot v2020.10-rc1 released   Michal Simek
  • [ANN] U-Boot v2020.10-rc1 released   Tom Rini
    • [ANN] U-Boot v2020.10-rc1 released   Michal Simek
• [PATCH] Dockerfile: update sbsigntools to v0.9.4   Tom Rini
• [PATCH v2 8/8] test: dm: Add tests for regmap managed API and regmap fields   Tom Rini
• [PATCH v3 6/6] test: Add tests for the multiplexer framework   Tom Rini
• Please pull u-boot-marvell/master   Stefan Roese
  • Please pull u-boot-marvell/master   Tom Rini
    • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
  • Please pull u-boot-marvell/master   Stefan Roese
    • Please pull u-boot-marvell/master   Tom Rini
• [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Andy Shevchenko
  • [PATCH v1 02/15] x86: advantech: som-db5800-som-6867: Remove dead code   Andy Shevchenko
    • [PATCH v1 02/15] x86: advantech: som-db5800-som-6867: Remove dead code   Simon Glass
  • [PATCH v1 07/15] x86: intel: bayleybay: Remove dead code   Andy Shevchenko
    • [PATCH v1 07/15] x86: intel: bayleybay: Remove dead code   Simon Glass
  • [PATCH v1 08/15] x86: intel: cherryhill: Remove dead code   Andy Shevchenko
    • [PATCH v1 08/15] x86: intel: cherryhill: Remove dead code   Simon Glass
  • [PATCH v1 09/15] x86: intel: cougarcanyon2: Remove dead code   Andy Shevchenko
    • [PATCH v1 09/15] x86: intel: cougarcanyon2: Remove dead code   Simon Glass
  • [PATCH v1 10/15] x86: intel: crownbay: Remove dead code   Andy Shevchenko
    • [PATCH v1 10/15] x86: intel: crownbay: Remove dead code   Simon Glass
  • [PATCH v1 11/15] x86: intel: edison: Remove dead code   Andy Shevchenko
    • [PATCH v1 11/15] x86: intel: edison: Remove dead code   Simon Glass
  • [PATCH v1 12/15] x86: intel: galileo: Remove dead code   Andy Shevchenko
    • [PATCH v1 12/15] x86: intel: galileo: Remove dead code   Simon Glass
  • [PATCH v1 13/15] x86: intel: minnowmax: Remove dead code   Andy Shevchenko
    • [PATCH v1 13/15] x86: intel: minnowmax: Remove dead code   Simon Glass
  • [PATCH v1 14/15] x86: intel: slimbootloader: Remove dead code   Andy Shevchenko
    • [PATCH v1 14/15] x86: intel: slimbootloader: Remove dead code   Simon Glass
    • [PATCH v1 14/15] x86: intel: slimbootloader: Remove dead code   Park, Aiden
  • [PATCH v1 15/15] x86: qemu: Remove dead code   Andy Shevchenko
    • [PATCH v1 15/15] x86: qemu: Remove dead code   Simon Glass
  • [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Stefan Roese
  • [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Park, Aiden
  • [PATCH v1 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Andy Shevchenko
• [PATCH v1 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code   Andy Shevchenko
  • [PATCH v1 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code   Stefan Roese
• [PATCH v1 04/15] x86: coreboot: Remove dead code   Andy Shevchenko
  • [PATCH v1 04/15] x86: coreboot: Remove dead code   Simon Glass
• [PATCH v1 05/15] x86: dfi: dfi-bt700: Remove dead code   Andy Shevchenko
  • [PATCH v1 05/15] x86: dfi: dfi-bt700: Remove dead code   Stefan Roese
• [PATCH v1 06/15] x86: efi: efi-x86_payload: Remove dead code   Andy Shevchenko
  • [PATCH v1 06/15] x86: efi: efi-x86_payload: Remove dead code   Simon Glass
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
• [PATCH 0/6] J2700: Enable various peripherals   Vignesh Raghavendra
  • [PATCH 1/6] arm: dts: k3-j7200: Add USB related DT entries   Vignesh Raghavendra
  • [PATCH 2/6] board: ti: j721e: Add support for HyperFlash detection   Vignesh Raghavendra
  • [PATCH 3/6] ARM: dts: k3-j7200: Add wkup gpio node   Vignesh Raghavendra
  • [PATCH 4/6] ARM: dts: k3-j7200: Add HyperBus and HyperFlash nodes   Vignesh Raghavendra
  • [PATCH 5/6] ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support   Vignesh Raghavendra
  • [PATCH 6/6] arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port   Vignesh Raghavendra
  • [PATCH 0/6] J2700: Enable various peripherals   Grygorii Strashko
  • [PATCH 0/6] J2700: Enable various peripherals   Lokesh Vutla
  • [PATCH 0/6] J2700: Enable various peripherals   Lokesh Vutla
• U-Boot Fails w/ Memory Test   Brownlie, Lewis
  • U-Boot Fails w/ Memory Test   Heinrich Schuchardt
  • U-Boot Fails w/ Memory Test   Brownlie, Lewis
• [PATCH v4 01/17] Kconfig: Introduce CONFIG_SYS_HAS_SRAM   Tom Rini
• [PATCH v4 02/17] Kconfig: Convert CONFIG_SYS_SRAM_BASE to Kconfig   Tom Rini
• [PATCH v4 03/17] Kconfig: Convert CONFIG_SYS_SRAM_SIZE to Kconfig   Tom Rini
• [PATCH v4 04/17] Kconfig: Remove CONFIG_SYS_SRAM_START   Tom Rini
• [PATCH v4 05/17] cmd: bdinfo: Move sram info prints to generic code   Tom Rini
• [PATCH v4 06/17] board_f: Introduce setup_bdinfo initcall   Tom Rini
• [PATCH v4 07/17] board_f: Introduce arch_setup_bdinfo initcall   Tom Rini
• [PATCH v4 09/17] board_f: Move sram bdinfo assignments to generic code   Tom Rini
• [PATCH v4 10/17] board_f: m68k: Factor out m68k-specific bdinfo setup   Tom Rini
• [PATCH v4 11/17] board_f: ppc: Factor out ppc-specific bdinfo setup   Tom Rini
• [PATCH v4 12/17] board_f: Remove setup_board_part1   Tom Rini
• [PATCH v4 13/17] dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probe   Tom Rini
• [PATCH v4 14/17] drivers: serial: Make serial_initialize return int   Tom Rini
• [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper   Tom Rini
  • [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper   Sean Anderson
    • [PATCH v4 15/17] common/board_r: Remove initr_serial wrapper   Sean Anderson
• [PATCH v4 16/17] blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOC   Tom Rini
• [PATCH v4 17/17] common/board_r: Move blkcache_init call earlier in the boot sequence   Tom Rini
• [PATCH v1 0/3] Rename Stratix10 FPGA driver and support Agilex   Chee Hong Ang
  • [PATCH v1 1/3] fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM Mailbox   Chee Hong Ang
    • [PATCH v1 1/3] fpga: altera: Rename Stratix10 FPGA to Intel FPGA SDM Mailbox   Tan, Ley Foon
  • [PATCH v1 2/3] fpga: intel_sdm_mb: Add watchdog reset   Chee Hong Ang
    • [PATCH v1 2/3] fpga: intel_sdm_mb: Add watchdog reset   Tan, Ley Foon
  • [PATCH v1 3/3] arm: socfpga: agilex: Enable FPGA Full Reconfiguration support   Chee Hong Ang
    • [PATCH v1 3/3] arm: socfpga: agilex: Enable FPGA Full Reconfiguration support   Tan, Ley Foon
• [PATCH] configs: socfpga: add kernel parameter for immediate reboot   Ooi, Joyce
  • [PATCH] configs: socfpga: add kernel parameter for immediate reboot   Tan, Ley Foon
• [PATCH v2] configs: socfpga: add kernel parameter for immediate reboot   Ooi, Joyce
  • [PATCH v2] configs: socfpga: add kernel parameter for immediate reboot   Tan, Ley Foon
    • [PATCH v2] configs: socfpga: add kernel parameter for immediate reboot   Simon Goldschmidt
• [PATCH v2 02/18] Kconfig: Introduce CONFIG_XEN   Anastasiia Lukianenko
• [PATCH] pinctrl: mediatek: mt8512: fix the wrong start address of ranges   Chunfeng Yun
  • [PATCH] pinctrl: mediatek: mt8512: fix the wrong start address of ranges   Tom Rini
• [PATCH 0/3] Misc fixes/cleanup   Sean Anderson
  • [PATCH 1/3] doc: Fix typo in FIT documentation   Sean Anderson
  • [PATCH 2/3] spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c   Sean Anderson
    • [PATCH 2/3] spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c   Pratyush Yadav
      • [PATCH 2/3] spi: Remove uses of #ifdef __U_BOOT__ from spi-mem.c   Sean Anderson
  • [PATCH 3/3] spi: Fix typo in header   Sean Anderson
• [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210   Sean Anderson
  • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Sean Anderson
    • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Marek Vasut
      • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Sean Anderson
    • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Heinrich Schuchardt
      • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Sean Anderson
      • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Heinrich Schuchardt
    • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Simon Glass
      • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Marek Vasut
      • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Tom Rini
      • [PATCH v2 01/10] spi: dw: Convert calls to debug to log_*   Marek Vasut
  • [PATCH v2 02/10] spi: dw: Rename "cs-gpio" to "cs-gpios"   Sean Anderson
  • [PATCH v2 03/10] spi: dw: Use generic function to read reg address   Sean Anderson
  • [PATCH v2 04/10] spi: dw: Rearrange struct dw_spi_priv   Sean Anderson
  • [PATCH v2 05/10] spi: dw: Add SoC-specific compatible strings   Sean Anderson
  • [PATCH v2 06/10] spi: dw: Configure ctrlr0 layout based on compatible string   Sean Anderson
  • [PATCH v2 07/10] spi: dw: Document devicetree binding   Sean Anderson
  • [PATCH v2 08/10] spi: dw: Add mem_ops   Sean Anderson
    • [PATCH v2 08/10] spi: dw: Add mem_ops   Sean Anderson
  • [PATCH v2 09/10] riscv: Add device tree bindings for SPI   Sean Anderson
    • [PATCH v2 09/10] riscv: Add device tree bindings for SPI   Rick Chen
  • [PATCH v2 10/10] riscv: Add support for SPI on Kendryte K210   Sean Anderson
    • [PATCH v2 10/10] riscv: Add support for SPI on Kendryte K210   Heinrich Schuchardt
      • [PATCH v2 10/10] riscv: Add support for SPI on Kendryte K210   Sean Anderson
  • [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210   Eugeniy Paltsev
    • [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210   Sean Anderson
      • [PATCH v2 00/10] riscv: Add SPI support for Kendryte K210   Eugeniy Paltsev
• [PATCH v2 1/7] wdt: dw: Switch to using fls for log2   Sean Anderson
  • [PATCH v2 2/7] wdt: dw: Switch to if(CONFIG()) instead of using #if   Sean Anderson
  • [PATCH v2 3/7] wdt: dw: Fix clock rate being off by 1000   Sean Anderson
  • [PATCH v2 4/7] wdt: dw: Enable the clock before using it   Sean Anderson
  • [PATCH v2 5/7] wdt: dw: Free the clock on error   Sean Anderson
  • [PATCH v2 6/7] riscv: Add watchdog bindings for the k210   Sean Anderson
    • [PATCH v2 6/7] riscv: Add watchdog bindings for the k210   Rick Chen
  • [PATCH v2 7/7] riscv: Enable watchdog for the k210   Sean Anderson
• [PATCH] Makefile: sunxi: Don't use binman to build ATF image   Simon Glass
  • [PATCH] Makefile: sunxi: Don't use binman to build ATF image   André Przywara
  • [PATCH] Makefile: sunxi: Don't use binman to build ATF image   Heinrich Schuchardt
    • [PATCH] Makefile: sunxi: Don't use binman to build ATF image   Simon Glass
  • [PATCH] Makefile: sunxi: Don't use binman to build ATF image   Tom Rini
• [RFC 3/4] dtoc: add support for generate stuct udevice_id   Simon Glass
  • [RFC 3/4] dtoc: add support for generate stuct udevice_id   Walter Lozano
• [PATCH 1/2] core: improve of_match_ptr with OF_PLATDATA   Simon Glass
• [PATCH] acpi: device: Fix check for sequence number   Simon Glass
  • [PATCH] acpi: device: Fix check for sequence number   Wolfgang Wallner
• Improvements to FIT ciphering   Philippe REYNES
  • Improvements to FIT ciphering   Patrick Oppenlander
    • Improvements to FIT ciphering   Philippe REYNES
      • Improvements to FIT ciphering   Patrick Oppenlander
• [PATCH v2 0/4] Misc fixes/cleanup   Sean Anderson
  • [PATCH v2 1/4] doc: Fix typo in FIT documentation   Sean Anderson
  • [PATCH v2 2/4] spi: Remove uses of #ifndef __U_BOOT__ from spi-mem.c   Sean Anderson
  • [PATCH v2 3/4] spi: Remove some instances of EXPORT_SYMBOL_GPL   Sean Anderson
  • [PATCH v2 4/4] spi: Fix typo in header   Sean Anderson
• [PATCH 0/2] efi_loader: set load options in boot manager   Heinrich Schuchardt
  • [PATCH 1/2] efi_loader: factor out efi_set_load_options()   Heinrich Schuchardt
  • [PATCH 2/2] efi_loader: set load options in boot manager   Heinrich Schuchardt
• [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Tom Rini
  • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
    • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Tom Rini
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Tom Rini
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Daniel Schwierzeck
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Simon Glass
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
      • [PATCH v2] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
• [PATCH] Travis: Add squashfs-tools   Tom Rini
  • [PATCH] Travis: Add squashfs-tools   Tom Rini
• [PATCH] test: efi_selftest: Do not force serial# setting   Heinrich Schuchardt
  • [PATCH] test: efi_selftest: Do not force serial# setting   Tom Rini
    • [PATCH] test: efi_selftest: Do not force serial# setting   Heinrich Schuchardt
      • [PATCH] test: efi_selftest: Do not force serial# setting   Tom Rini
• [PATCH 1/1] test/py: serial# cannot be overwritten on some devices   Heinrich Schuchardt
  • [PATCH 1/1] test/py: serial# cannot be overwritten on some devices   Tom Rini
• [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S   Kever Yang
• [PATCH] ram: rockchip: Disable debug output of RAM init by default   Kever Yang
  • [PATCH] ram: rockchip: Disable debug output of RAM init by default   Michael Walle
• [PATCH 7/7] doc: rockchip: Document Rockchip miniloader flashing   Kever Yang
• [PATCH 1/7] arm: dts: rockchip: px30: Add Engicam EDIMM2.2 Starter Kit   Kever Yang
• [PATCH 2/7] arm: dts: rockchip: Add Engicam PX30.Core SOM   Kever Yang
• [PATCH 3/7] rockchip: px30: Add EVB_PX30 Kconfig help   Kever Yang
• [PATCH 4/7] rockchip: Add Engicam PX30.Core EDIMM2.2 Starter Kit   Kever Yang
• [PATCH 6/7] rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF   Kever Yang
• [PATCH v4 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
  • [PATCH v4 01/19] board: ti: board_detect: Add stub functions for EEPROM detection apis   Lokesh Vutla
  • [PATCH v4 02/19] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined   Lokesh Vutla
  • [PATCH v4 03/19] board: ti: j721e: Update fdt fixup logic for interconnect nodes   Lokesh Vutla
  • [PATCH v4 04/19] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled   Lokesh Vutla
  • [PATCH v4 05/19] arm: mach-k3: Move mmr_unlock to a common location   Lokesh Vutla
  • [PATCH v4 06/19] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image   Lokesh Vutla
  • [PATCH v4 07/19] arm: mach-k3: j721e: Add detection for j721e   Lokesh Vutla
  • [PATCH v4 08/19] arm: mach-k3: j721e: Fix unlocking control module registers   Lokesh Vutla
  • [PATCH v4 09/19] arm: mach-k3: j7200: Add support for SOC detection   Lokesh Vutla
  • [PATCH v4 10/19] arm: mach-k3: j7200: Add support for storing extended boot info from ROM   Lokesh Vutla
  • [PATCH v4 11/19] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw   Lokesh Vutla
  • [PATCH v4 12/19] board: ti: j7200: Introduce support for j7200 build targets   Lokesh Vutla
  • [PATCH v4 13/19] board: ti: j7200: Add board detection support for j7200   Lokesh Vutla
  • [PATCH v4 14/19] ram: k3-j721e: Relax version checks for memory controller   Lokesh Vutla
  • [PATCH v4 15/19] soc: soc_ti_k3: Add device identification for J7200 SoC   Lokesh Vutla
  • [PATCH v4 16/19] arm: dts: k3-j7200: Add dts support   Lokesh Vutla
  • [PATCH v4 17/19] arm: dts: k3-j7200: Add R5 specific dts support   Lokesh Vutla
  • [PATCH v4 18/19] configs: j7200_evm_r5: Add initial support   Lokesh Vutla
  • [PATCH v4 19/19] configs: j7200_evm_a72: Add Initial support   Lokesh Vutla
  • [PATCH v4 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform   Lokesh Vutla
• [PATCH v4 02/27] rockchip: Allow Bob to use SPI boot   Kever Yang
  • [PATCH v4 02/27] rockchip: Allow Bob to use SPI boot   Simon Glass
• [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman   Kever Yang
  • [PATCH v4 00/27] rockchip: x86: Support building ROM files automatically with binman   Simon Glass
• [PATCH v2 1/3] mkimage: fit: only process one cipher node   Tom Rini
• [PATCH v2 2/3] mkimage: fit: handle FDT_ERR_NOSPACE when ciphering   Tom Rini
• [PATCH v2 3/3] mkimage: fit: don't cipher ciphered data   Tom Rini
• [PATCH] mkimage: fit: include image cipher in configuration signature   Tom Rini
• [PATCH] mkimage: fit: fix import of external data   Tom Rini
• [PATCH v9 1/2] led: led_cortina: Add CAxxx LED support   Tom Rini
• [PATCH v9 2/2] board: presidio: add LED support   Tom Rini
• [PATCH v2 1/5] test: Add a way to check part of a console line or skip it   Tom Rini
• [PATCH v2 2/5] console: Always define the console-recording functions   Tom Rini
• [PATCH v2 3/5] dm: Rename DM test flags to make them more generic   Tom Rini
• [PATCH v2 4/5] test: Add a flag for tests that need console recording   Tom Rini
• [PATCH v2 5/5] cmd: Update the memory-search command   Tom Rini
• [PATCH v4 1/6] fs/squashfs: new filesystem   Tom Rini
  • [PATCH v4 1/6] fs/squashfs: new filesystem   Tom Rini
• [PATCH v4 2/6] fs/squashfs: add filesystem commands   Tom Rini
• [PATCH v4 3/6] include/u-boot, lib/zlib: add sources for zlib decompression   Tom Rini
• [PATCH v4 4/6] fs/squashfs: add support for zlib decompression   Tom Rini
• [PATCH v4 5/6] fs/fs.c: add symbolic link case to fs_ls_generic()   Tom Rini
• [PATCH v4 6/6] test/py: Add tests for the SquashFS commands   Tom Rini
  • [PATCH v4 6/6] test/py: Add tests for the SquashFS commands   Tom Rini
    • [PATCH v4 6/6] test/py: Add tests for the SquashFS commands   Joao Marcos Costa
• [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Kever Yang
  • [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Simon Glass
    • [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Kever Yang
      • [PATCH v4 07/27] rockchip: Enable building a SPI ROM image on bob   Simon Glass
• OpenBSI and U-Boot   Heinrich Schuchardt
  • OpenBSI and U-Boot   Sean Anderson
    • OpenBSI and U-Boot   Heinrich Schuchardt
      • OpenBSI and U-Boot   Sean Anderson
      • OpenBSI and U-Boot   Heinrich Schuchardt
      • OpenBSI and U-Boot   Sean Anderson
      • OpenBSI and U-Boot   Heinrich Schuchardt
      • OpenBSI and U-Boot   Sean Anderson
      • OpenBSI and U-Boot   Heinrich Schuchardt
      • OpenBSI and U-Boot   Atish Patra
      • OpenBSI and U-Boot   Heinrich Schuchardt
      • OpenBSI and U-Boot   Atish Patra
      • OpenBSI and U-Boot   Rick Chen
      • OpenBSI and U-Boot   Heinrich Schuchardt
      • OpenBSI and U-Boot   Atish Patra
      • OpenBSI and U-Boot   Rick Chen
  • OpenBSI and U-Boot   Atish Patra
• [PATCH 1/1] lib: hang() must be __efi_runtime   Heinrich Schuchardt
• [PATCH 1/1] lib/crypto: simplify public_key_verify_signature   Heinrich Schuchardt
• [PATCH] sunxi: Enable ethernet on newer Olimex OLinuXino-A20-Lime2-eMMC   Jonas Smedegaard
• [PATCH] git-mailrc: Update email address of Maxime Ripard   Jonas Smedegaard
  • [PATCH] git-mailrc: Update email address of Maxime Ripard   Maxime Ripard
• [PATCH] serial: sh: Improve FIFO empty check on RX   Marek Vasut
• [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Pali Rohár
  • [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Peng Fan
    • [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Faiz Abbas
      • [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Pali Rohár
      • [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Faiz Abbas
      • [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Pali Rohár
      • [PATCH] Revert "mmc: disable UHS modes if Vcc cannot be switched on and off"   Pali Rohár
• MAIX: CONFIG_SYS_INIT_SP_ADDR   Heinrich Schuchardt
  • MAIX: CONFIG_SYS_INIT_SP_ADDR   Sean Anderson
    • MAIX: CONFIG_SYS_INIT_SP_ADDR   Heinrich Schuchardt
      • MAIX: CONFIG_SYS_INIT_SP_ADDR   Sean Anderson
• [PATCH] arm: socfpga: soc64: Document down boot_scratch_cold register usage   Siew Chin Lim
  • [PATCH] arm: socfpga: soc64: Document down boot_scratch_cold register usage   Lim, Elly Siew Chin
• [PATCH v2] arm: socfpga: soc64: Document down boot_scratch_cold register usage   Siew Chin Lim
  • [PATCH v2] arm: socfpga: soc64: Document down boot_scratch_cold register usage   Tan, Ley Foon
    • [PATCH v4 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
      • [PATCH v4 01/10] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
      • [PATCH v4 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
      • [PATCH v4 03/10] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
      • [PATCH v4 04/10] usb: common: add define of usb_speed_string()   Chunfeng Yun
      • [PATCH v4 05/10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
      • [PATCH v4 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Chunfeng Yun
      • [PATCH v4 07/10] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
      • [PATCH v4 08/10] configs: mt8512: enable fastboot   Chunfeng Yun
      • [PATCH v4 09/10] configs: mt8512: add USB host related configs   Chunfeng Yun
      • [PATCH v4 10/10] MAINTAINERS: add mtu3 driver to ARM MEDIATEK   Chunfeng Yun
• [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance   ChiaWei Wang
  • [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance   Tom Rini
    • [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance   ChiaWei Wang
      • [U-Boot] requesting a custodian tree for Aspeed SoCs maintenance   Tom Rini
• [PATCH 1/4] arm: mvebu: armada-xp-theadorable.dts: Fix dtc warning   Stefan Roese
  • [PATCH 2/4] arm: mvebu: armada-xp-maxbcm.dts: Fix dtc warning   Stefan Roese
  • [PATCH 3/4] arm: mvebu: armada-388-gp.dts: Fix dtc warnings   Stefan Roese
    • [PATCH 3/4] arm: mvebu: armada-388-gp.dts: Fix dtc warnings   Chris Packham
  • [PATCH 4/4] arm: mvebu: armada-3720-turris-mox.dts: Fix dtc warning   Stefan Roese
• Aw: [PATCH 0/5] Add PCIe and its clock support for mt7622   Frank Wunderlich
  • [PATCH 0/5] Add PCIe and its clock support for mt7622   Chuanjia Liu
    • [PATCH 1/5] clk: mediatek: add pciesys support for MT7622 SoC   Chuanjia Liu
      • [PATCH 1/5] clk: mediatek: add pciesys support for MT7622 SoC   Tom Rini
    • [PATCH 2/5] arm: dts: mediatek: add pciesys support for MT7622 SoC   Chuanjia Liu
      • [PATCH 2/5] arm: dts: mediatek: add pciesys support for MT7622 SoC   Tom Rini
    • [PATCH 3/5] PCI: mediatek: Add PCIe support for MT7622   Chuanjia Liu
      • [PATCH 3/5] PCI: mediatek: Add PCIe support for MT7622   Tom Rini
    • [PATCH 4/5] arm: dts: mediatek: add PCIe node for MT7622   Chuanjia Liu
      • [PATCH 4/5] arm: dts: mediatek: add PCIe node for MT7622   Tom Rini
    • [PATCH 5/5] configs: mt7622: add PCIe controller related configs   Chuanjia Liu
      • [PATCH 5/5] configs: mt7622: add PCIe controller related configs   Tom Rini
  • [PATCH 0/5] Add PCIe and its clock support for mt7622   Henry Yen
    • Aw: Re: [PATCH 0/5] Add PCIe and its clock support for mt7622   Frank Wunderlich
• Question about 0.9V on lsch3   Martin Kaistra
  • Question about 0.9V on lsch3   Priyanka Jain (OSS)
• [PATCH] test/py: fix SquashFS tests   Joao Marcos Costa
  • [PATCH] test/py: fix SquashFS tests   Tom Rini
• [RFC PATCH 0/4] Add 32bit-mode for mt7622   Frank Wunderlich
  • [RFC PATCH 1/4] mt7622: Support to build 32 bits version.   Frank Wunderlich
    • [RFC PATCH 1/4] mt7622: Support to build 32 bits version.   Sam Shih
      • [RFC PATCH 1/4] mt7622: Support to build 32 bits version.   Frank Wunderlich
  • [RFC PATCH 2/4] mt7622: add lowlevel_init from 2014-04   Frank Wunderlich
  • [RFC PATCH 3/4] jumparch64: insert into bootm   Frank Wunderlich
  • [RFC PATCH 4/4] jumparch64: add go64   Frank Wunderlich
• [PATCH 0/2] Add DTS for BananaPi-R64   Frank Wunderlich
  • [PATCH 1/2] arm: dts: add watchdog-node for mt7622   Frank Wunderlich
    • [PATCH 1/2] arm: dts: add watchdog-node for mt7622   Tom Rini
  • [PATCH 2/2] dts: r64: add r64 dts   Frank Wunderlich
    • [PATCH 2/2] dts: r64: add r64 dts   Tom Rini
• [PATCH v2] armv8: layerscape: don't remove crypto node if just partially disabled   Michael Walle
• [PATCH 0/5] add SATA/AHCI support for BananaPi R64   Frank Wunderlich
  • [PATCH 2/5] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
  • [PATCH 3/5] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH 4/5] ahci: mediatek: add ahci driver   Frank Wunderlich
  • [PATCH 5/5] dts: r64: add sata- and asm_sel nodes   Frank Wunderlich
• [PATCH 1/5] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
• [PATCH v1] arm: socfpga: soc64: Add timeout waiting for NOC idle ACK   Chee Hong Ang
  • [PATCH v1] arm: socfpga: soc64: Add timeout waiting for NOC idle ACK   Tan, Ley Foon
• [PATCH v2 0/5] add SATA/AHCI support for BananaPi R64   Frank Wunderlich
  • [PATCH v2 1/5] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
  • [PATCH v2 2/5] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
    • [PATCH v2 2/5] phy: mtk-tphy: add PHY_TYPE_SATA   Chunfeng Yun
  • [PATCH v2 3/5] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH v2 4/5] ahci: mediatek: add ahci driver   Frank Wunderlich
    • [PATCH v2 4/5] ahci: mediatek: add ahci driver   Chunfeng Yun
      • Aw: Re: [PATCH v2 4/5] ahci: mediatek: add ahci driver   Frank Wunderlich
      • Aw: Re: [PATCH v2 4/5] ahci: mediatek: add ahci driver   Chunfeng Yun
  • [PATCH v2 5/5] dts: r64: add sata- and asm_sel nodes   Frank Wunderlich
• Memory POST Test - Timing   Brownlie, Lewis
• [ANN] U-Boot v2020.10-rc2 released   Tom Rini
  • [ANN] U-Boot v2020.10-rc2 released   Tom Rini
• u-boot tarball downloads via https   Chris Packham
  • u-boot tarball downloads via https   Tom Rini
• [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Heinrich Schuchardt
  • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Rick Chen
    • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Heinrich Schuchardt
      • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Sean Anderson
      • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Heinrich Schuchardt
      • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Sean Anderson
  • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Bin Meng
    • [PATCH 1/1] riscv: don't jump to 0x0 in handle_ipi()   Heinrich Schuchardt
• Pull request for UEFI sub-system for efi-2020-10-rc3   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-10-rc3   Tom Rini
• [PATCH 1/2] rockchip: dts: rk3399-evb: add sdmmc node   Kever Yang
• [PATCH 2/2] rockchip: config: evb-rk3399: Add rockchip dwmmc support   Kever Yang
• [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Chee Hong Ang
  • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
    • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Ang, Chee Hong
      • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
  • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tom Rini
    • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Marek Vasut
      • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tom Rini
      • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Simon Goldschmidt
      • [PATCH v2] Makefile: socfpga: Generate spl/u-boot-splx4.sfp with 4 SPL images   Tom Rini
• [GIT PULL] TI changes for v2020.10-rc3   Lokesh Vutla
  • [GIT PULL] TI changes for v2020.10-rc3   Tom Rini
    • [GIT PULL] TI changes for v2020.10-rc3   Jan Kiszka
      • [GIT PULL] TI changes for v2020.10-rc3   Tom Rini
      • [GIT PULL] TI changes for v2020.10-rc3   Lokesh Vutla
      • [GIT PULL] TI changes for v2020.10-rc3   Tom Rini
• [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Lokesh Vutla
  • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
    • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Lokesh Vutla
      • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
      • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Lokesh Vutla
      • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
      • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Lokesh Vutla
      • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
      • [PATCH v2 0/3] watchdog: K3: Add RTI watchdog support   Jan Kiszka
• [PATCH] arm: mach-k3: Clean non-coherent lines out of L3 cache   Lokesh Vutla
• [PATCH v2] board: ti: am65x: Update fdt fixup logic for interconnect nodes   Lokesh Vutla
• [PATCH 0/2] Update TI K3 cbass interconnect node names   Lokesh Vutla
• [PATCH] mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value   Lokesh Vutla
• [PATCH 0/2] fs/squashfs: Add new decompression algorithms   Joao Marcos Costa
  • [PATCH 1/2] fs/squashfs: add support for LZO decompression   Joao Marcos Costa
  • [PATCH 2/2] fs/squashfs: add support for ZSTD decompression   Joao Marcos Costa
    • [PATCH 2/2] fs/squashfs: add support for ZSTD decompression   Thomas Petazzoni
      • [PATCH 2/2] fs/squashfs: add support for ZSTD decompression   Joao Marcos Costa
  • [PATCH 0/2] fs/squashfs: Add new decompression algorithms   Tom Rini
    • [PATCH 0/2] fs/squashfs: Add new decompression algorithms   Joao Marcos Costa
    • [PATCH 0/2] fs/squashfs: Add new decompression algorithms   Joao Marcos Costa
      • [PATCH 0/2] fs/squashfs: Add new decompression algorithms   Tom Rini
• [PATCH v3 1/1] Makefile: socfpga: Generate sfp file with 4 SPL images   Chee Hong Ang
  • [PATCH v3 1/1] Makefile: socfpga: Generate sfp file with 4 SPL images   Tan, Ley Foon
• [PATCH 1/2] avb: Make AVB independent of fastboot   Usama Arif
  • [PATCH 2/2] board: armltd: Add support for Total Compute platform   Usama Arif
    • [PATCH 2/2] board: armltd: Add support for Total Compute platform   Tom Rini
      • [PATCH 2/2] board: armltd: Add support for Total Compute platform   Usama Arif
  • [PATCH 1/2] avb: Make AVB independent of fastboot   Tom Rini
  • [PATCH 1/2] avb: Make AVB independent of fastboot   Igor Opaniuk
  • [PATCH 1/2] avb: Make AVB independent of fastboot   Tom Rini
• [PATCH] Makefile: fix annoying sunxi hack message   Frank Wunderlich
  • [PATCH] Makefile: fix annoying sunxi hack message   Tom Rini
    • Aw: Re: [PATCH] Makefile: fix annoying sunxi hack message   Frank Wunderlich
    • Aw: Re: [PATCH] Makefile: fix annoying sunxi hack message   Frank Wunderlich
    • [PATCH] Makefile: fix annoying sunxi hack message   Michal Simek
      • [PATCH] Makefile: fix annoying sunxi hack message   Tom Rini
      • [PATCH] Makefile: fix annoying sunxi hack message   Michal Simek
      • [PATCH] Makefile: fix annoying sunxi hack message   Tom Rini
  • [PATCH] Makefile: fix annoying sunxi hack message   Tom Rini
• [PATCH 1/1] cmd/efidebug: missing initialization of load_options   Heinrich Schuchardt
• [PATCH v2 0/8] stdio: Clean up stdio.c   Simon Glass
  • [PATCH v2 0/8] stdio: Clean up stdio.c   Simon Glass
• [PATCH v2 1/8] moveconfig: Skip binary and ELF files   Simon Glass
  • [PATCH v2 2/8] Convert CONFIG_SPLASH_SCREEN et al to Kconfig   Simon Glass
    • [PATCH v2 2/8] Convert CONFIG_SPLASH_SCREEN et al to Kconfig   Tom Rini
  • [PATCH v2 3/8] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig   Simon Glass
    • [PATCH v2 3/8] Convert CONFIG_SYS_DEVICE_NULLDEV to Kconfig   Tom Rini
  • [PATCH v2 4/8] stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV   Simon Glass
    • [PATCH v2 4/8] stdio: Tidy up use of CONFIG_SYS_DEVICE_NULLDEV   Tom Rini
  • [PATCH v2 5/8] stdio: Drop #ifdefs in the header file   Simon Glass
    • [PATCH v2 5/8] stdio: Drop #ifdefs in the header file   Tom Rini
  • [PATCH v2 6/8] stdio: Update to use compiler for Kconfig checks   Simon Glass
    • [PATCH v2 6/8] stdio: Update to use compiler for Kconfig checks   Tom Rini
  • [PATCH v2 7/8] stdio: Drop brackets around &devs.list   Simon Glass
    • [PATCH v2 7/8] stdio: Drop brackets around &devs.list   Tom Rini
  • [PATCH v2 8/8] stdio: Tidy up the coding style   Simon Glass
    • [PATCH v2 8/8] stdio: Tidy up the coding style   Tom Rini
  • [PATCH v2 1/8] moveconfig: Skip binary and ELF files   Tom Rini
• [PATCH] efi_loader: variable: keep temporary buffer during the authentication   AKASHI Takahiro
• [PATCH v1 0/5] SoCFPGA mailbox driver fixes and enhancements   Chee Hong Ang
  • [PATCH v1 1/5] arm: socfpga: mailbox: Refactor mailbox timeout event handling   Chee Hong Ang
  • [PATCH v1 2/5] arm: socfpga: mailbox: Always read mailbox responses before returning status   Chee Hong Ang
  • [PATCH v1 3/5] arm: socfpga: mailbox: Support sending large mailbox command   Chee Hong Ang
  • [PATCH v1 4/5] arm: socfpga: mailbox: Update mailbox response codes   Chee Hong Ang
  • [PATCH v1 5/5] arm: socfpga: mailbox: Add mailbox retry support   Chee Hong Ang
• [GIT PULL v2] TI changes for v2020.10-rc3   Lokesh Vutla
  • [GIT PULL v2] TI changes for v2020.10-rc3   Tom Rini
• reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Andrii Voloshyn
  • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Stefan Roese
    • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Andrii Voloshyn
      • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Stefan Roese
      • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Andrii Voloshyn
      • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Stefan Roese
      • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Andrii Voloshyn
      • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Weijie Gao
      • reset command doesn't work on MT7628 (CPU: MediaTek MT7628A ver:1 eco:2)   Andrii Voloshyn
• [PATCH v2] firmware: psci: Do not bind driver if U-Boot runs in EL3   Michal Simek
• [PATCH] common: Kconfig: Add dependency for default variables strings   Michal Simek
  • [PATCH] common: Kconfig: Add dependency for default variables strings   Tom Rini
• [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
  • [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
    • [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
      • [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
      • [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Daniel Schwierzeck
      • [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
  • [PATCH v3] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Daniel Schwierzeck
• pytest to test reset   Peng Fan
  • pytest to test reset   Simon Glass
• [PATCH 0/4] xilinx: common: Fix fdt/initrd_high and bootm_* variables   Michal Simek
  • [PATCH 1/4] xilinx: common: Get rid of fdt_high variable   Michal Simek
  • [PATCH 2/4] xilinx: common: Get rid of initrd_high variable setup   Michal Simek
  • [PATCH 3/4] xilinx: common: Check return value from variable setup   Michal Simek
  • [PATCH 4/4] xilinx: common: Change bootm_size variable setting   Michal Simek
  • [PATCH 0/4] xilinx: common: Fix fdt/initrd_high and bootm_* variables   Michal Simek
• [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
  • [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Rick Chen
    • [PATCH v4 00/12] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH v2] board: armltd: Add support for Total Compute platform   Usama Arif
  • [PATCH v2] board: armltd: Add support for Total Compute platform   Tom Rini
    • [PATCH v2] board: armltd: Add support for Total Compute platform   Usama Arif
• [PATCH] board: armltd: Add support for Total Compute platform   Usama Arif
• [PATCH v3] board: armltd: Add support for Total Compute platform   Usama Arif
  • [PATCH v3] board: armltd: Add support for Total Compute platform   Tom Rini
    • [PATCH v3] board: armltd: Add support for Total Compute platform   Usama Arif
  • [PATCH v3] board: armltd: Add support for Total Compute platform   Tom Rini
• [PATCH 0/2] board/freescale/vid: rework of VID support   Wasim Khan
  • [PATCH 1/2] board/freescale/vid: rework of VID support   Wasim Khan
  • [PATCH 2/2] board/freescale/vid: Add support for LTC7132 voltage regulator   Wasim Khan
• [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable   Tom Rini
  • [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable   Peng Fan
    • [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable   Tom Rini
      • [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable   Stefano Babic
      • [PATCH] arm: mx6: Make all i.MX6 SoCs user-selectable   Tom Rini
• Cannot boot from eMMC on Odroid C4 with u-boot 2020.10-rc2   Garrick James
• [RFC PATCH] tools: env: Add an option to have an empty default environment   Chris Packham
  • [RFC PATCH] tools: env: Add an option to have an empty default environment   Joe Hershberger
  • [RFC PATCH] tools: env: Add an option to have an empty default environment   Wolfgang Denk
    • [RFC PATCH] tools: env: Add an option to have an empty default environment   Chris Packham
      • [RFC PATCH] tools: env: Add an option to have an empty default environment   Wolfgang Denk
  • [RFC PATCH] tools: env: Add an option to have an empty default environment   Stefano Babic
    • [RFC PATCH] tools: env: Add an option to have an empty default environment   Chris Packham
• [PATCH 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
  • [PATCH 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.   Chunfeng Yun
  • [PATCH 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Chunfeng Yun
    • Aw: [PATCH 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Frank Wunderlich
      • Aw: [PATCH 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Chunfeng Yun
  • [PATCH 04/11] usb: xhci: convert to HCS_MAX_PORTS()   Chunfeng Yun
  • [PATCH 05/11] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
  • [PATCH 06/11] usb: xhci: convert to TRB_INTR_TARGET()   Chunfeng Yun
  • [PATCH 07/11] usb: xhci: convert to TRB_LEN()   Chunfeng Yun
  • [PATCH 08/11] usb: xhci: convert to TRB_TX_TYPE()   Chunfeng Yun
  • [PATCH 09/11] usb: xhci: convert to EP_TYPE()   Chunfeng Yun
  • [PATCH 10/11] usb: xhci: use macros with parameter to fill ep_info2   Chunfeng Yun
  • [PATCH 11/11] usb: xhci: convet to readx_poll_sleep_timeout()   Chunfeng Yun
    • Aw: [PATCH 11/11] usb: xhci: convet to readx_poll_sleep_timeout()   Frank Wunderlich
      • Aw: [PATCH 11/11] usb: xhci: convet to readx_poll_sleep_timeout()   Chunfeng Yun
• [PATCH v3] common/board_f: make sure to call fix_fdt() before reserve_fdt()   Pragnesh Patel
• [PATCH 1/1] doc: riscv: debug UART for MAIX   Rick Chen
  • [PATCH 1/1] doc: riscv: debug UART for MAIX   Heinrich Schuchardt
• [PATCH v4 0/9] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info   Stefan Roese
• [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
  • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Pali Rohár
  • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Andy Shevchenko
    • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
      • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Andy Shevchenko
  • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Andy Shevchenko
  • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Wolfgang Denk
    • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
      • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Wolfgang Denk
    • [PATCH v4 1/9] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Tom Rini
• [PATCH v4 2/9] image: Use gd->ram_base/_size in env_get_bootm_size()   Stefan Roese
• [PATCH v4 3/9] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
• [PATCH v4 4/9] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Stefan Roese
  • [PATCH v4 4/9] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Wolfgang Denk
    • [PATCH v4 4/9] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Stefan Roese
• [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
  • [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()   Ovidiu Panait
    • [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
      • [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
      • [PATCH v4 5/9] xtensa: Remove arch_setup_bdinfo()   Ovidiu Panait
• [PATCH v4 6/9] video: cfb_console.c: Use bi_dram[] values on all platforms   Stefan Roese
• [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Stefan Roese
  • [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Stefan Roese
    • [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Arcturus Support
    • [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Priyanka Jain (OSS)
  • [PATCH v4 7/9] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Arcturus Support
• [PATCH v4 8/9] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Stefan Roese
• [PATCH v4 9/9] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info   Stefan Roese
• [PATCH] arm: dts: lx2160a: Add IO range   Wasim Khan
• [Uboot-stm32] [PATCH 02/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 02/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected   Patrice CHOTARD
• [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power   Patrice CHOTARD
    • [Uboot-stm32] [PATCH 03/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_power   Patrice CHOTARD
• [Uboot-stm32] [PATCH 04/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 04/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_init   Patrice CHOTARD
• [Uboot-stm32] [PATCH 05/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 05/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_inf   Patrice CHOTARD
• [Uboot-stm32] [PATCH 06/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 06/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fix   Patrice CHOTARD
• [Uboot-stm32] [PATCH 07/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 07/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_init   Patrice CHOTARD
• [Uboot-stm32] [PATCH 08/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 08/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in env functions   Patrice CHOTARD
• [Uboot-stm32] [PATCH 09/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 09/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setup   Patrice CHOTARD
• [PATCH 10/11] arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 10/11] arm: stm32mp: bsec: use IS_ENABLED to prevent ifdef   Patrice CHOTARD
• [PATCH 11/11] arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 11/11] arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdef   Patrice CHOTARD
• [PATCH 01/11] mtd: rawnand: stm32_fmc2: fix a buffer overflow   Patrice CHOTARD
  • [PATCH 01/11] mtd: rawnand: stm32_fmc2: fix a buffer overflow   Patrice CHOTARD
• [PATCH 02/11] mtd: rawnand: stm32_fmc2: remove useless inline comments   Patrice CHOTARD
  • [PATCH 02/11] mtd: rawnand: stm32_fmc2: remove useless inline comments   Patrice CHOTARD
• [PATCH 03/11] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts   Patrice CHOTARD
  • [PATCH 03/11] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts   Patrice CHOTARD
• [PATCH 04/11] mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant   Patrice CHOTARD
  • [PATCH 04/11] mtd: rawnand: stm32_fmc2: cosmetic change to use nfc instead of fmc2 where relevant   Patrice CHOTARD
• [PATCH 05/11] mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros   Patrice CHOTARD
  • [PATCH 05/11] mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros   Patrice CHOTARD
• [PATCH 06/11] mtd: rawnand: stm32_fmc2: use clrsetbits_le32   Patrice CHOTARD
  • [PATCH 06/11] mtd: rawnand: stm32_fmc2: use clrsetbits_le32   Patrice CHOTARD
• [PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver   Patrice CHOTARD
  • [PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver   Patrice CHOTARD
• [PATCH 08/11] mtd: rawnand: stm32_fmc2: get resources from parent node   Patrice CHOTARD
  • [PATCH 08/11] mtd: rawnand: stm32_fmc2: get resources from parent node   Patrice CHOTARD
• [PATCH 09/11] board: stm32mp1: update fdt fixup partitions table   Patrice CHOTARD
• [PATCH 10/11] configs: stm32mp: add CONFIG_STM32_FMC2_EBI   Patrice CHOTARD
  • [PATCH 10/11] configs: stm32mp: add CONFIG_STM32_FMC2_EBI   Patrice CHOTARD
• [PATCH 11/11] ARM: dts: stm32: add FMC2 EBI support for stm32mp157c   Patrice CHOTARD
  • [PATCH 11/11] ARM: dts: stm32: add FMC2 EBI support for stm32mp157c   Patrice CHOTARD
• [PATCH] ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM   Patrice CHOTARD
  • [PATCH] ARM: stm32: Add fitImage its entry for 587-200 DHCOR SoM   Patrice CHOTARD
• [PATCH] ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage its   Patrice CHOTARD
  • [PATCH] ARM: stm32: Add both PDK2 and DRC02 DT into DHCOM fitImage its   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Update eth1addr from EEPROM if eth1 present   Patrice CHOTARD
  • [PATCH] ARM: dts: stm32: Update eth1addr from EEPROM if eth1 present   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: stm32mp1: remove board.c   Patrice CHOTARD
  • [Uboot-stm32] [PATCH] board: stm32mp1: remove board.c   Patrice CHOTARD
• [Uboot-stm32] [PATCH] board: stm32mp1: use const for struct node_info   Patrice CHOTARD
  • [Uboot-stm32] [PATCH] board: stm32mp1: use const for struct node_info   Patrice CHOTARD
• [Uboot-stm32] [PATCH 01/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check   Patrice CHOTARD
  • [Uboot-stm32] [PATCH 01/11] board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_check   Patrice CHOTARD
• [PATCH] efi_loader: variable: fix secure state initialization   AKASHI Takahiro
  • [PATCH] efi_loader: variable: fix secure state initialization   Heinrich Schuchardt
• [PATCH] cmd: demo: Remove duplicated help message for list subcommand   Michal Simek
  • [PATCH] cmd: demo: Remove duplicated help message for list subcommand   Simon Glass
  • [PATCH] cmd: demo: Remove duplicated help message for list subcommand   Tom Rini
• [PATCH v3 0/5] add SATA/AHCI support for BananaPi R64   Frank Wunderlich
  • [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
    • [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants   Tom Rini
      • Aw: Re: [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
      • [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants   Tom Rini
      • Aw: Re: Re: [PATCH v3 1/5] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
  • [PATCH v3 2/5] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
    • [PATCH v3 2/5] phy: mtk-tphy: add PHY_TYPE_SATA   Tom Rini
  • [PATCH v3 3/5] reset: add basic reset controller for pciesys   Frank Wunderlich
    • [PATCH v3 3/5] reset: add basic reset controller for pciesys   Tom Rini
  • [PATCH v3 4/5] ahci: mediatek: add ahci driver   Frank Wunderlich
    • [PATCH v3 4/5] ahci: mediatek: add ahci driver   Tom Rini
  • [PATCH v3 5/5] dts: r64: add sata- and asm_sel nodes   Frank Wunderlich
    • [PATCH v3 5/5] dts: r64: add sata- and asm_sel nodes   Tom Rini
• [PATCHv2 00/10] Introduce B1x5v2 support   Sebastian Reichel
  • [PATCHv2 04/10] rtc: m41t62: add oscillator fail bit reset support   Sebastian Reichel
  • [PATCHv2 05/10] imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL   Sebastian Reichel
  • [PATCHv2 07/10] board: ge: common: rename ge_common.c to ge_rtc.c   Sebastian Reichel
  • [PATCHv2 08/10] board: ge: common: add config option for RTC and VPD feature   Sebastian Reichel
  • [PATCHv2 09/10] board: ge: common: vpd: separate I2C specific code   Sebastian Reichel
  • [PATCHv2 10/10] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2   Sebastian Reichel
• [PATCHv2 01/10] bootcount: add a DM SPI flash backing store for bootcount   Sebastian Reichel
• [PATCHv2 02/10] gpio: mxc_gpio: add support to read status of output gpios   Sebastian Reichel
• [PATCHv2 03/10] rtc: m41t62: reset SQW in m41t62_rtc_reset   Sebastian Reichel
• [PATCHv2 06/10] sysreset: Add poweroff-gpio driver   Sebastian Reichel
  • [PATCHv2 06/10] sysreset: Add poweroff-gpio driver   Simon Glass
• [EXT] [PATCH v2] ls1028a: use default scan_dev_for_boot   Mian Yousaf Kaukab
• am654_sdhci: mmc fail to send stop cmd   Jan Kiszka
• [PATCH] gpio: Add support for gpio-line-names reading   Michal Simek
• [PATCH 0/5] J7200: Add HyperFlash boot support   Vignesh Raghavendra
  • [PATCH 1/5] arm: mach-k3: Add HyperFlash boot mode support   Vignesh Raghavendra
  • [PATCH 2/5] board: ti: j721e: Add support for HyperFlash detection   Vignesh Raghavendra
  • [PATCH 3/5] ARM: dts: k3-j7200-r5-common-proc-board: Enable HyperFlash   Vignesh Raghavendra
  • [PATCH 4/5] configs: j7200_evm_*_defconfig: Enable HyperFlash boot related configs   Vignesh Raghavendra
  • [PATCH 5/5] configs: j721e_evm.h: Add U-Boot image address for HyperFlash boot   Vignesh Raghavendra
• [PATCH 1/2] fdtdec: optionally add property no-map to created reserved memory node   Patrice Chotard
  • [PATCH 2/2] optee: add property no-map to secure reserved memory   Patrice Chotard
  • [PATCH 1/2] fdtdec: optionally add property no-map to created reserved memory node   Simon Glass
    • [PATCH 1/2] fdtdec: optionally add property no-map to created reserved memory node   Patrice CHOTARD
• [PATCH v3] firmware: psci: Do not bind driver if U-Boot runs in EL3   Michal Simek
  • [PATCH v3] firmware: psci: Do not bind driver if U-Boot runs in EL3   Tom Rini
• [PATCH] mmc: sdhci: Enable high speed conditional on the correspnding bit   Michal Simek
  • [PATCH] mmc: sdhci: Enable high speed conditional on the correspnding bit   Michal Simek
• [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200813   Patrice CHOTARD
  • [PULL] Pull request: u-boot-stm32 for v2020.10= u-boot-stm32-20200813   Tom Rini
• [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers   Michal Simek
  • [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers   Heiko Schocher
  • [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers   Michal Simek
  • [PATCH] xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers   Michal Simek
• U-Boot stats   Adam Ford
  • U-Boot stats   Wolfgang Denk
• [PATCH v1] arm: socfpga: soc64: Disable CONFIG_PSCI_RESET   Chee Hong Ang
• [PATCH 1/2] efi_loader: signature: correct a behavior against multiple signatures   AKASHI Takahiro
  • [PATCH 2/2] test/py: efi_secboot: modify 'multiple signatures' test case   AKASHI Takahiro
  • [PATCH 1/2] efi_loader: signature: correct a behavior against multiple signatures   Heinrich Schuchardt
• [PATCH 1/2] configs: odroid-n2: update for HDMI output & USB keyboard   Anand Moon
  • [PATCH 2/2] configs: odroid-c4: update for HDMI output background & USB keyboard   Anand Moon
    • [PATCH 2/2] configs: odroid-c4: update for HDMI output background & USB keyboard   Neil Armstrong
  • [PATCH 1/2] configs: odroid-n2: update for HDMI output & USB keyboard   Neil Armstrong
• [PATCH v5 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info   Stefan Roese
• [PATCH v5 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
• [PATCH v5 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()   Stefan Roese
• [PATCH v5 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
  • [PATCH v5 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Daniel Schwierzeck
    • [PATCH v5 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
• [PATCH v5 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Stefan Roese
• [PATCH v5 05/10] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
• [PATCH v5 06/10] xtensa: Remove local no-op dram_init_banksize()   Stefan Roese
• [PATCH v5 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms   Stefan Roese
• [PATCH v5 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Stefan Roese
• [PATCH v5 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Stefan Roese
• [PATCH v5 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info   Stefan Roese
• [PATCH] arm: dts: mt7622: add PCIe nodes for BananaPi-R64   Frank Wunderlich
  • [PATCH] arm: dts: mt7622: add PCIe nodes for BananaPi-R64   Tom Rini
• Pull request: u-boot-riscv/master 20200814   uboot at andestech.com
  • Pull request: u-boot-riscv/master 20200814   Tom Rini
• [PATCH 0/3] Add USB for MT7622/MT7623   Frank Wunderlich
  • [PATCH 2/3] arm: dts: mt7622: add USB nodes   Frank Wunderlich
  • [PATCH 3/3] arm: dts: mt7623: add USB nodes   Frank Wunderlich
• [PATCH 1/3] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
• [PATCH] x86: mtrr: Fix parsing of "mtrr list" command   Wolfgang Wallner
  • [PATCH] x86: mtrr: Fix parsing of "mtrr list" command   Simon Glass
• [PATCH] arm: dts: mt7622: add USB nodes to rfb   Frank Wunderlich
• [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
  • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
    • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Michal Simek
      • [PATCH v4 20/27] Makefile: Warn against using CONFIG_SPL_FIT_GENERATOR   Simon Glass
• [PATCH] spi/zynqmp_gqspi.c: Use a sane timeout value in milliseconds   Mike Looijmans
• x86: apl: Acessing SPI flash when booting with Coreboot/U-Boot   Wolfgang Wallner
  • x86: apl: Acessing SPI flash when booting with Coreboot/U-Boot   Simon Glass
• [PATCH] riscv: load addresses for Sipeed MAIX   Heinrich Schuchardt
• [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Heinrich Schuchardt
  • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Anup Patel
    • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Heinrich Schuchardt
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Anup Patel
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Heinrich Schuchardt
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Anup Patel
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Heinrich Schuchardt
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Anup Patel
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Heinrich Schuchardt
      • [PATCH 1/1] riscv: riscv_get_time() implementation for SMODE   Anup Patel
• [PATCH v1 1/2] drivers: pci: add api to get dma regions   Tom Rini
• [PATCH v1 2/2] drivers: pcie: add Broadcom IPROC PCIe RC driver   Tom Rini
• [PATCH v1 1/3] common: ns3: add error logging support   Tom Rini
  • [PATCH v1 1/3] common: ns3: add error logging support   Rayagonda Kokatanur
• HDMi Output on OrangePi Win/Win Plus Allwinner A64 (SUN50I)   Anton Gorlov
  • HDMi Output on OrangePi Win/Win Plus Allwinner A64 (SUN50I)   Anton Gorlov
• [PATCH v2 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Heinrich Schuchardt
  • [PATCH v2 1/1] riscv: fix building with CONFIG_SPL_SMP=n   Pragnesh Patel
• Pull request for UEFI sub-system for efi-2020-10-rc3 (2)   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-10-rc3 (2)   Tom Rini
• [PATCH v5 00/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
  • [PATCH v5 01/11] pinctrl: Add pinmux property support to pinctrl-generic   Sean Anderson
  • [PATCH v5 02/11] pinctrl: Reformat documentation in dm/pinctrl.h   Sean Anderson
  • [PATCH v5 03/11] test: pinmux: Add test for pin muxing   Sean Anderson
  • [PATCH v5 04/11] pinctrl: Add support for Kendryte K210 FPIOA   Sean Anderson
  • [PATCH v5 05/11] gpio: dw: Fix warnings about casting int to pointer   Sean Anderson
  • [PATCH v5 06/11] gpio: dw: Add a trailing underscore to generated name   Sean Anderson
  • [PATCH v5 07/11] gpio: dw: Return output value when direction is out   Sean Anderson
  • [PATCH v5 08/11] led: gpio: Default to using node name if label is absent   Sean Anderson
  • [PATCH v5 09/11] test: dm: Test for default led naming   Sean Anderson
  • [PATCH v5 10/11] riscv: Add pinmux and gpio bindings for Kendryte K210   Sean Anderson
  • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
    • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Rick Chen
      • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
      • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Rick Chen
      • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Rick Chen
      • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
      • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Ruinland ChuanTzu Tsai
      • [PATCH v5 11/11] riscv: Add FPIOA and GPIO support for Kendryte K210   Sean Anderson
• [PATCH 1/1] efi_loader: document parameters of do_bootefi_exec()   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: remove empty comment line   Heinrich Schuchardt
• [PATCH 1/1] configs: defconfig for Sipeed Maix in S-mode   Heinrich Schuchardt
• [Xilinx Zynq]: spurious UART receive on startup   Norbert Braun
  • [Xilinx Zynq]: spurious UART receive on startup   Michal Simek
    • [Xilinx Zynq]: spurious UART receive on startup   Norbert Braun
    • [PATCH] serial: zynq: disable TX and RX while changing baud rate   Norbert Braun
• [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Simon Glass
  • [RFC PATCH v2 0/3] RFC: tiny-dm: Proposal for using driver model in SPL   Walter Lozano
• [PATCH 1/2] cmd: clk: cosmetic: correct code alignment in show_clks   Simon Glass
• [PATCH 2/2] cmd: clk: correctly handle depth for clk dump   Simon Glass
• [PATCH v1 00/10] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622/mt7623   Frank Wunderlich
  • [PATCH v1 02/10] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
  • [PATCH v1 03/10] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH v1 04/10] ahci: mediatek: add ahci driver   Frank Wunderlich
  • [PATCH v1 05/10] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
  • [PATCH v1 06/10] arm: dts: add watchdog-reboot node for mt7622   Frank Wunderlich
  • [PATCH v1 07/10] arm: dts: add dts for Bananapi-R64   Frank Wunderlich
  • [PATCH v1 08/10] dts: r64: add sata- and asm_sel nodes   Frank Wunderlich
    • [PATCH v1 08/10] dts: r64: add sata- and asm_sel nodes   Chunfeng Yun
  • [PATCH v1 09/10] arm: dts: mt7622: add USB nodes   Frank Wunderlich
    • [PATCH v1 09/10] arm: dts: mt7622: add USB nodes   Chunfeng Yun
      • [PATCH v1 09/10] arm: dts: mt7622: add USB nodes   Frank Wunderlich
  • [PATCH v1 10/10] arm: dts: mt7623: add USB nodes   Frank Wunderlich
    • [PATCH v1 10/10] arm: dts: mt7623: add USB nodes   Chunfeng Yun
    • [PATCH v1 10/10] arm: dts: mt7623: add USB nodes   Chunfeng Yun
• [PATCH v1 01/10] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
• [PATCH 1/1] doc: update UEFI documentation   Heinrich Schuchardt
• [PATCH] net: smc911x: Automatically Update ethaddr with MAC   Adam Ford
  • [PATCH] net: smc911x: Automatically Update ethaddr with MAC   Tom Rini
    • [PATCH] net: smc911x: Automatically Update ethaddr with MAC   Adam Ford
• [PATCH 1/1] cmd: provide command sbi   Heinrich Schuchardt
  • [PATCH 1/1] cmd: provide command sbi   Bin Meng
    • [PATCH 1/1] cmd: provide command sbi   Heinrich Schuchardt
      • [PATCH 1/1] cmd: provide command sbi   Bin Meng
• [PATCH v2 3/3] doc: verified-boot: add required-mode information   Thirupathaiah Annapureddy
  • [PATCH v2 3/3] doc: verified-boot: add required-mode information   Simon Glass
• [PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot   Chee Hong Ang
  • [PATCH v1 01/16] arm: socfpga: soc64: Remove CONFIG_OF_EMBED   Chee Hong Ang
  • [PATCH v1 02/16] arm: socfpga: soc64: Add FIT generator script for pack itb with ATF   Chee Hong Ang
  • [PATCH v1 03/16] arm: socfpga: Add function for checking description from FIT image   Chee Hong Ang
  • [PATCH v1 04/16] arm: socfpga: soc64: Load FIT image with ATF support   Chee Hong Ang
  • [PATCH v1 05/16] arm: socfpga: soc64: Override 'lowlevel_init' to support ATF   Chee Hong Ang
  • [PATCH v1 06/16] arm: socfpga: Disable "spin-table" method for booting Linux   Chee Hong Ang
  • [PATCH v1 07/16] arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA (64bits)   Chee Hong Ang
  • [PATCH v1 08/16] arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP services   Chee Hong Ang
  • [PATCH v1 09/16] mmc: dwmmc: socfpga: Add ATF support for MMC driver   Chee Hong Ang
  • [PATCH v1 10/16] net: designware: socfpga: Add ATF support for MAC driver   Chee Hong Ang
  • [PATCH v1 11/16] arm: socfpga: soc64: Add ATF support for Reset Manager driver   Chee Hong Ang
  • [PATCH v1 12/16] arm: socfpga: soc64: Add ATF support for FPGA reconfig driver   Chee Hong Ang
  • [PATCH v1 13/16] arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to mbox_reset_cold()   Chee Hong Ang
  • [PATCH v1 14/16] arm: socfpga: soc64: SSBL shall not setup stack on OCRAM   Chee Hong Ang
  • [PATCH v1 15/16] arm: socfpga: soc64: Skip handoff data access in SSBL   Chee Hong Ang
  • [PATCH v1 16/16] configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF support   Chee Hong Ang
  • [PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot   Simon Goldschmidt
    • [PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot   Ang, Chee Hong
• [PATCH] ARM: bootm: take into account gd->ram_top   Baruch Siach
  • [PATCH] ARM: bootm: take into account gd->ram_top   Patrice CHOTARD
• [PATCH v2 0/5] powerpc, mpc83xx: add DM_ETH support   Heiko Schocher
• [PATCH 0/3] arm: k3: Update to SYFW ABI 3.0 changes   Lokesh Vutla
  • [PATCH 2/3] firmware: ti_sci: Drop unused structure ti_sci_rm_type_map   Lokesh Vutla
  • [PATCH 3/3] arm: dts: k3-am65: Update the RM resource types   Lokesh Vutla
  • [PATCH 0/3] arm: k3: Update to SYFW ABI 3.0 changes   Lokesh Vutla
• [PATCH 1/3] firmware: ti_sci: drop the device ids to resource id translation table   Lokesh Vutla
• [PATCH v3 0/3] Add support for multiple required keys   Thirupathaiah Annapureddy
  • [PATCH v3 1/3] vboot: add DTB policy for supporting multiple required conf keys   Thirupathaiah Annapureddy
  • [PATCH v3 2/3] test: vboot: add tests for multiple required keys   Thirupathaiah Annapureddy
  • [PATCH v3 3/3] doc: verified-boot: add required-mode information   Thirupathaiah Annapureddy
• [PATCH v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
  • [PATCH v2 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Chunfeng Yun
  • [PATCH v2 06/11] usb: xhci: convert to TRB_INTR_TARGET()   Chunfeng Yun
  • [PATCH v2 07/11] usb: xhci: convert to TRB_LEN()   Chunfeng Yun
  • [PATCH v2 08/11] usb: xhci: convert to TRB_TX_TYPE()   Chunfeng Yun
  • [PATCH v2 09/11] usb: xhci: convert to EP_TYPE()   Chunfeng Yun
  • [PATCH v2 10/11] usb: xhci: use macros with parameter to fill ep_info2   Chunfeng Yun
  • [PATCH v2 11/11] usb: xhci: convert to readx_poll_sleep_timeout()   Chunfeng Yun
• [PATCH v2 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.   Chunfeng Yun
• [PATCH v2 04/11] usb: xhci: convert to HCS_MAX_PORTS()   Chunfeng Yun
• [PATCH v2 05/11] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
• [PATCH v6 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info   Stefan Roese
• [PATCH v6 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
  • [PATCH v6 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Daniel Schwierzeck
• [PATCH v6 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()   Stefan Roese
  • [PATCH v6 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()   Daniel Schwierzeck
• [PATCH v6 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
  • [PATCH v6 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Daniel Schwierzeck
  • [PATCH v6 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Ovidiu Panait
• [PATCH v6 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Stefan Roese
  • [PATCH v6 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Daniel Schwierzeck
• [PATCH v6 05/10] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
  • [PATCH v6 05/10] xtensa: Remove arch_setup_bdinfo()   Ovidiu Panait
• [PATCH v6 06/10] xtensa: Remove local no-op dram_init_banksize()   Stefan Roese
  • [PATCH v6 06/10] xtensa: Remove local no-op dram_init_banksize()   Ovidiu Panait
• [PATCH v6 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms   Stefan Roese
• [PATCH v6 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Stefan Roese
• [PATCH v6 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Stefan Roese
  • [PATCH v6 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Daniel Schwierzeck
  • [PATCH v6 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Ovidiu Panait
• [PATCH v6 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info   Stefan Roese
• [PATCH v2 00/25] arm: Introduce Marvell/Cavium OcteonTX/TX2   Stefan Roese
  • [PATCH v2 02/25] dm: core: Add API to read PCI bus-range property   Stefan Roese
    • [PATCH v2 02/25] dm: core: Add API to read PCI bus-range property   Simon Glass
  • [PATCH v2 03/25] pci: pci-uclass: Remove #ifdef CONFIG_NR_DRAM_BANKS as its always set   Stefan Roese
  • [PATCH v2 04/25] ARM: renesas: Drop unnecessary function ft_board_setup()   Stefan Roese
    • [PATCH v2 04/25] ARM: renesas: Drop unnecessary function ft_board_setup()   Simon Glass
  • [PATCH v2 05/25] pci: pci-uclass: Dynamically allocate the PCI regions   Stefan Roese
    • [PATCH v2 05/25] pci: pci-uclass: Dynamically allocate the PCI regions   Simon Glass
  • [PATCH v2 06/25] pci: pci-uclass: Fix incorrect argument in map_physmem   Stefan Roese
  • [PATCH v2 07/25] pci: pci-uclass: Make DT subnode parse optional   Stefan Roese
  • [PATCH v2 08/25] pci: pci-uclass: Add multi entry support for memory regions   Stefan Roese
    • [PATCH v2 08/25] pci: pci-uclass: Add multi entry support for memory regions   Simon Glass
  • [PATCH v2 09/25] pci: pci-uclass: Add support for Enhanced Allocation in Bridges   Stefan Roese
  • [PATCH v2 10/25] pci: pci-uclass: Add support for Single-Root I/O Virtualization   Stefan Roese
  • [PATCH v2 11/25] pci: pci-uclass: Add VF BAR map support for Enhanced Allocation   Stefan Roese
  • [PATCH v2 12/25] pci: pci-uclass: Add support for Alternate-RoutingID capability   Stefan Roese
  • [PATCH v2 13/25] pci: pci-uclass: Check validity of ofnode   Stefan Roese
  • [PATCH v2 14/25] arm: include/asm/io.h: Add 64bit clrbits and setbits helpers   Stefan Roese
  • [PATCH v2 15/25] arm: octeontx: Add headers for OcteonTX   Stefan Roese
  • [PATCH v2 16/25] arm: octeontx2: Add headers for OcteonTX2   Stefan Roese
  • [PATCH v2 17/25] ata: ahci: Add BAR index quirk for Cavium PCI SATA device   Stefan Roese
  • [PATCH v2 18/25] pci: Add PCI controller driver for OcteonTX / TX2   Stefan Roese
  • [PATCH v2 19/25] mmc: Add MMC controller driver for OcteonTX / TX2   Stefan Roese
  • [PATCH v2 20/25] mtd: nand: Add NAND controller driver for OcteonTX   Stefan Roese
  • [PATCH v2 21/25] net: Add NIC controller driver for OcteonTX   Stefan Roese
  • [PATCH v2 22/25] net: Add NIC controller driver for OcteonTX2   Stefan Roese
  • [PATCH v2 23/25] watchdog: Add reset support for OcteonTX / TX2   Stefan Roese
  • [PATCH v2 24/25] arm: octeontx: Add support for OcteonTX SoC platforms   Stefan Roese
  • [PATCH v2 25/25] arm: octeontx2: Add support for OcteonTX2 SoC platforms   Stefan Roese
• [PATCH v2 01/25] fdtdec: Add API to read pci bus-range property   Stefan Roese
• [PATCH v5 00/10] Add support MediaTek USB3 DRD driver   Chunfeng Yun
  • [PATCH v5 01/10] dt-binding: usb: add bindings for some common properties   Chunfeng Yun
  • [PATCH v5 02/10] dt-bindings: usb: mtu3: add bindings for MediaTek USB3 DRD   Chunfeng Yun
  • [PATCH v5 03/10] usb: add USB_SPEED_SUPER_PLUS   Chunfeng Yun
  • [PATCH v5 04/10] usb: common: add define of usb_speed_string()   Chunfeng Yun
    • [PATCH v5 04/10] usb: common: add define of usb_speed_string()   Roger Quadros
      • [PATCH v5 04/10] usb: common: add define of usb_speed_string()   Roger Quadros
      • [PATCH v5 04/10] usb: common: add define of usb_speed_string()   Chunfeng Yun
  • [PATCH v5 05/10] usb: add MediaTek USB3 DRD driver   Chunfeng Yun
  • [PATCH v5 06/10] usb: gadget: Add bcdDevice for the MTU3 USB Gadget Controller   Chunfeng Yun
  • [PATCH v5 07/10] arm: dts: mt8512: add usb related nodes   Chunfeng Yun
  • [PATCH v5 08/10] configs: mt8512: enable fastboot   Chunfeng Yun
  • [PATCH v5 09/10] configs: mt8512: add USB host related configs   Chunfeng Yun
  • [PATCH v5 10/10] MAINTAINERS: add USB driver to ARM MEDIATEK   Chunfeng Yun
• [PATCH] cmd: fix clone coverity scan   John Chau
  • [PATCH] cmd: fix clone coverity scan   Tom Rini
• libfdt: Warnings of signed/unsigned comparison   Jan Kiszka
  • libfdt: Warnings of signed/unsigned comparison   Simon Glass
• board/arch-specific artifacts vs. make clean   Jan Kiszka
• binman build questions   Jan Kiszka
  • binman build questions   Simon Glass
• U-Boot issue   0x5c4r3
• [PATCH v2 1/1] configs: defconfig for Sipeed Maix in S-mode   Heinrich Schuchardt
  • [PATCH v2 1/1] configs: defconfig for Sipeed Maix in S-mode   Bin Meng
  • [PATCH v2 1/1] configs: defconfig for Sipeed Maix in S-mode   Sean Anderson
• [PATCH 1/5] IPQ40xx: Add SMEM support   Robert Marko
  • [PATCH 2/5] reset: Add IPQ40xx reset controller driver   Robert Marko
  • [PATCH 3/5] IPQ40xx: Add reset controller support   Robert Marko
  • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Robert Marko
    • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Tom Rini
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Marek Vasut
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Robert Marko
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Marek Vasut
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Robert Marko
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Marek Vasut
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Robert Marko
      • [PATCH 4/5] usb: xhci: Add Qualcomm DWC3 xHCI driver   Marek Vasut
  • [PATCH 5/5] IPQ40xx: Add USB nodes   Robert Marko
• [PATCH v2 0/9] mips: Add Octeon DDR4 init code   Stefan Roese
  • [PATCH v2 2/9] mips: octeon: Add octeon-model.h header   Stefan Roese
    • [PATCH v2 2/9] mips: octeon: Add octeon-model.h header   Daniel Schwierzeck
      • [PATCH v2 2/9] mips: octeon: Add octeon-model.h header   Stefan Roese
  • [PATCH v2 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header   Stefan Roese
    • [PATCH v2 3/9] mips: octeon Add cvmx/cvmx-lmcx-defs.h header   Daniel Schwierzeck
  • [PATCH v2 4/9] mips: octeon: Add octeon_ddr.h header   Stefan Roese
    • [PATCH v2 4/9] mips: octeon: Add octeon_ddr.h header   Daniel Schwierzeck
      • [PATCH v2 4/9] mips: octeon: Add octeon_ddr.h header   Stefan Roese
  • [PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)   Stefan Roese
    • [PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)   Daniel Schwierzeck
      • [PATCH v2 5/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 1/3)   Stefan Roese
  • [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)   Stefan Roese
    • [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)   Daniel Schwierzeck
      • [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)   Stefan Roese
      • [PATCH v2 6/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 2/3)   Stefan Roese
  • [PATCH v2 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)   Stefan Roese
    • [PATCH v2 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)   Daniel Schwierzeck
      • [PATCH v2 7/9] ram: octeon: Add MIPS Octeon3 DDR4 support (part 3/3)   Stefan Roese
  • [PATCH v2 8/9] mips: octeon: dram.c: Add RAM driver support   Stefan Roese
  • [PATCH v2 9/9] mips: octeon: octeon_ebb7304: Add DDR4 support   Stefan Roese
• [PATCH v2 1/9] mips: octeon: dts: mrvl, cn73xx.dtsi: Add memory controller DT node   Stefan Roese
• Error when decompressing with LZO   Joao Marcos Costa
  • Error when decompressing with LZO   Tom Rini
• [PATCH v1 0/8] mips/usb: Add Octeon xHCI USB support   Stefan Roese
  • [PATCH v1 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()   Stefan Roese
  • [PATCH v1 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses on Octeon   Stefan Roese
    • [PATCH v1 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses on Octeon   Daniel Schwierzeck
      • [PATCH v1 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses on Octeon   Stefan Roese
  • [PATCH v1 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Stefan Roese
  • [PATCH v1 4/8] mips: octeon: cpu.c: Add table for selective swapping   Stefan Roese
  • [PATCH v1 5/8] mips: octeon: Add mangle-port.h   Stefan Roese
    • [PATCH v1 5/8] mips: octeon: Add mangle-port.h   Daniel Schwierzeck
      • [PATCH v1 5/8] mips: octeon: Add mangle-port.h   Stefan Roese
  • [PATCH v1 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()   Stefan Roese
  • [PATCH v1 7/8] mips: octeon: Add USB DT nodes   Stefan Roese
  • [PATCH v1 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support   Stefan Roese
    • [PATCH v1 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support   Daniel Schwierzeck
      • [PATCH v1 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support   Stefan Roese
• [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports   Pali Rohár
  • [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports   Stefan Roese
    • [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports   Pali Rohár
      • [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports   Stefan Roese
  • [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports   Andre Heider
  • [PATCH] arm: mvebu: Espressobin: Disallow forwarding packets between wan and lan ports   Stefan Roese
• [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA   Pali Rohár
  • [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA   Stefan Roese
    • [EXT] Re: [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA   Kostya Porotchkin
  • [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA   Andre Heider
  • [PATCH] arm: mvebu: Espressobin: Enable CONFIG_MVNETA   Stefan Roese
• [GIT PULL] UniPhier SoC updates for v2020.10-rc3   Masahiro Yamada
  • [GIT PULL] UniPhier SoC updates for v2020.10-rc3   Tom Rini
• [PATCH 1/2] board_f: Remove dead code from init_func_i2c   Ovidiu Panait
  • [PATCH 1/2] board_f: Remove dead code from init_func_i2c   Simon Glass
    • [PATCH 1/2] board_f: Remove dead code from init_func_i2c   Simon Glass
• [PATCH 2/2] sandbox: u-boot.lds: Remove bogus __bss_start symbol   Ovidiu Panait
  • [PATCH 2/2] sandbox: u-boot.lds: Remove bogus __bss_start symbol   Simon Glass
    • [PATCH 2/2] sandbox: u-boot.lds: Remove bogus __bss_start symbol   Simon Glass
• [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support   Stephen Carlson
  • [PATCH] arm: fsl: common: Improve NXP VID driver PMBus support   Stephen Carlson
• [PATCH 0/3] Configure J721E Main R5FSS1 to Split-mode & env   Suman Anna
  • [PATCH 1/3] arm: dts: k3-j721e-main: Configure MAIN R5FSS1 for Split-mode   Suman Anna
  • [PATCH 2/3] configs: j721e_evm: Add Main R5FSS1 Core1 to default rproc boot list   Suman Anna
  • [PATCH 3/3] env: ti: j721e-evm: Limit scope of rproc env variables used by R5 SPL   Suman Anna
• [PATCH 0/8] Early-boot support of R5FSS from A72 U-Boot for J7200 SoCs   Suman Anna
  • [PATCH 1/8] dt-bindings: remoteproc: k3-r5f: Update bindings for J7200 SoCs   Suman Anna
  • [PATCH 2/8] remoteproc: k3-r5: Add support for J7200 R5Fs   Suman Anna
  • [PATCH 3/8] armv8: K3: j7200: Add custom MMU support   Suman Anna
  • [PATCH 4/8] arm: dts: k3-j7200-mcu: Add MCU domain R5F cluster node   Suman Anna
  • [PATCH 5/8] arm: dts: k3-j7200-main: Add MAIN domain R5F cluster nodes   Suman Anna
  • [PATCH 6/8] env: ti: j721e-evm: Update rproc_fw_binaries env variable for J7200   Suman Anna
  • [PATCH 7/8] configs: j7200_evm_a72: Enable R5F remoteproc driver   Suman Anna
  • [PATCH 8/8] configs: j7200_evm_a72: Enhance bootcmd to start remoteprocs   Suman Anna
• [PATCH] net: ftgmac100: Add support for board specific PHY interface address   Thirupathaiah Annapureddy
  • [PATCH] net: ftgmac100: Add support for board specific PHY interface address   Cédric Le Goater
• [PATCH] include: phy: fix NULL pointer check in phy_write()   Thirupathaiah Annapureddy
  • [PATCH] include: phy: fix NULL pointer check in phy_write()   Michal Simek
• [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Thirupathaiah Annapureddy
  • [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Thirupathaiah Annapureddy
    • [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Ryan Chen
      • [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Thirupathaiah Annapureddy
      • [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Tom Rini
      • [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Thirupathaiah Annapureddy
      • [PATCH] arm: dts: fix ast2500-evb inclusion for correct target   Tom Rini
• [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Y.b. Lu
  • [v3, 00/11] mmc: fsl_esdhc: support eMMC HS200/HS400 modes   Jaehoon Chung
• [PATCH v2 0/2] arm: socfpga: enable CONFIG_BOOTCOMMAND for cyclone5   Ooi, Joyce
  • [PATCH v2 1/2] arm: socfpga: checks if FPGA is in user mode before enabling FPGA bridge   Ooi, Joyce
  • [PATCH v2 2/2] configs: socfpga: add CONFIG_BOOTCOMMAND for cyclone5   Ooi, Joyce
• [PATCH 1/2] riscv: fu540: Use correct API to get L2 cache controller base address   Bin Meng
  • [PATCH 2/2] ram: sifive: Fix compiler warnings for 32-bit   Bin Meng
    • [PATCH 2/2] ram: sifive: Fix compiler warnings for 32-bit   Rick Chen
    • [PATCH 2/2] ram: sifive: Fix compiler warnings for 32-bit   Pragnesh Patel
  • [PATCH 1/2] riscv: fu540: Use correct API to get L2 cache controller base address   Rick Chen
  • [PATCH 1/2] riscv: fu540: Use correct API to get L2 cache controller base address   Pragnesh Patel
• [PATCH 3/4] clk: add clock driver for SCMI agents   Etienne Carriere
  • [PATCH 3/4] clk: add clock driver for SCMI agents   Sudeep Holla
• [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Bin Meng
  • [PATCH v2 7/7] riscv: Update SiFive device tree for new CLINT driver   Sean Anderson
• [PATCH v2 0/7] f_sdp: fix and update   Peng Fan
  • [PATCH v2 1/7] sdp: call board_usb_init at spl_sdp_load_image   Peng Fan
    • [PATCH v2 1/7] sdp: call board_usb_init at spl_sdp_load_image   Lukasz Majewski
      • [PATCH v2 1/7] sdp: call board_usb_init at spl_sdp_load_image   Peng Fan
  • [PATCH v2 2/7] f_sdp: Add high speed endpoint descriptor   Peng Fan
    • [PATCH v2 2/7] f_sdp: Add high speed endpoint descriptor   Lukasz Majewski
  • [PATCH v2 3/7] f_sdp: Fix wrong usb request size   Peng Fan
    • [PATCH v2 3/7] f_sdp: Fix wrong usb request size   Lukasz Majewski
  • [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image   Peng Fan
    • [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image   Lukasz Majewski
      • [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image   Peng Fan
      • [PATCH v2 4/7] f_sdp: Support searching and loading FIT or container image   Lukasz Majewski
  • [PATCH v2 5/7] spl: add g_dnl_get_board_bcd_device_number   Peng Fan
    • [PATCH v2 5/7] spl: add g_dnl_get_board_bcd_device_number   Lukasz Majewski
  • [PATCH v2 6/7] f_sdp: Add EP1_OUT as default data receive pipe in sdp   Peng Fan
  • [PATCH v2 7/7] f_sdp: Change bInterval of interrupt endpoint to 3   Peng Fan
• [PATCH v3 0/4] Support for specifying extra IOMMU mappings for PCI   laurentiu.tudor at nxp.com
  • [PATCH v3 1/4] pci: layerscape: move per-pci device fdt fixup in a function   laurentiu.tudor at nxp.com
  • [PATCH v3 2/4] pci: layerscape: move pci node search in a common function   laurentiu.tudor at nxp.com
  • [PATCH v3 3/4] pci: add a few ARI and SRIOV related defines   laurentiu.tudor at nxp.com
  • [PATCH v3 4/4] pci: layerscape: add a way of specifying additional iommu mappings   laurentiu.tudor at nxp.com
• [v2] arm: mx6: Make all i.MX6 SoCs user-selectable   Tom Rini
  • [v2] arm: mx6: Make all i.MX6 SoCs user-selectable   Marcin Niestrój
  • [v2] arm: mx6: Make all i.MX6 SoCs user-selectable   sbabic at denx.de
• [PATCH v2 2/3] configs: pico-imx6ul: convert DM_VIDEO   sbabic at denx.de
• [PATCH v2 3/3] pico-imx6ul: convert ethernet function to DM_ETH   sbabic at denx.de
• [PATCH v2 1/3] configs: pico-imx6ul: convert DM_USB   sbabic at denx.de
• [PATCH] tools/imximage: fix DCD Blocks message output order   sbabic at denx.de
• [PATCH v2 0/4] fs/squashfs   Joao Marcos Costa
  • [PATCH v2 1/4] fs/squashfs: add support for LZO decompression   Joao Marcos Costa
  • [PATCH v2 2/4] fs/squashfs: add support for ZSTD decompression   Joao Marcos Costa
  • [PATCH v2 3/4] fs/squashfs: Add init. and clean-up functions to decompression   Joao Marcos Costa
  • [PATCH v2 4/4] test/py: Add tests for LZO and ZSTD   Joao Marcos Costa
• [PATCH V2] net: smc911x: Automatically Update ethaddr with MAC   Adam Ford
• [PATCH v3 0/4] fs/squashfs: Add new decompression algorithms   Joao Marcos Costa
  • [PATCH v3 1/4] fs/squashfs: Add init. and clean-up functions to decompression   Joao Marcos Costa
    • [PATCH v3 1/4] fs/squashfs: Add init. and clean-up functions to decompression   Thomas Petazzoni
  • [PATCH v3 2/4] fs/squashfs: add support for ZSTD decompression   Joao Marcos Costa
    • [PATCH v3 2/4] fs/squashfs: add support for ZSTD decompression   Thomas Petazzoni
      • [PATCH v3 2/4] fs/squashfs: add support for ZSTD decompression   Joao Marcos Costa
  • [PATCH v3 3/4] fs/squashfs: add support for LZO decompression   Joao Marcos Costa
  • [PATCH v3 4/4] test/py: Add tests for LZO and ZSTD   Joao Marcos Costa
• [RESEND][PATCH 0/3] Raspberry pi improvements usb core   Jason Wessel
  • [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
    • [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Marek Vasut
      • [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Jason Wessel
      • [RESEND][PATCH 2/3] common/usb.c: Work around keyboard reporting "USB device not accepting new address"   Marek Vasut
  • [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()   Jason Wessel
    • [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()   Marek Vasut
      • [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()   Jason Wessel
      • [RESEND][PATCH 3/3] usb.c: Add a retry in the usb_prepare_device()   Marek Vasut
  • [RESEND][PATCH 0/3] Raspberry pi improvements usb core   Marek Vasut
• [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending   Jason Wessel
  • [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending   Marek Vasut
    • [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending   Jason Wessel
      • [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending   Marek Vasut
      • [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending   Jason Wessel
      • [RESEND][PATCH 1/3] usb_kbd: succeed even if no interrupt is pending   Marek Vasut
• [PATCH v4 0/5] fs/squashfs: Add new decompression algorithms   Joao Marcos Costa
  • [PATCH v4 1/5] fs/squashfs: Add init and clean-up functions to decompression   Joao Marcos Costa
    • [PATCH v4 1/5] fs/squashfs: Add init and clean-up functions to decompression   Thomas Petazzoni
    • [PATCH v4 1/5] fs/squashfs: Add init and clean-up functions to decompression   Tom Rini
  • [PATCH v4 2/5] fs/squashfs: replace sqfs_decompress() parameter   Joao Marcos Costa
    • [PATCH v4 2/5] fs/squashfs: replace sqfs_decompress() parameter   Tom Rini
  • [PATCH v4 3/5] fs/squashfs: add support for ZSTD decompression   Joao Marcos Costa
    • [PATCH v4 3/5] fs/squashfs: add support for ZSTD decompression   Tom Rini
  • [PATCH v4 4/5] fs/squashfs: add support for LZO decompression   Joao Marcos Costa
    • [PATCH v4 4/5] fs/squashfs: add support for LZO decompression   Tom Rini
  • [PATCH v4 5/5] test/py: Add tests for LZO and ZSTD   Joao Marcos Costa
    • [PATCH v4 5/5] test/py: Add tests for LZO and ZSTD   Tom Rini
• [PATCH v2 1/4] firmware: add new driver for SCMI firmwares   Etienne Carriere
  • [PATCH v2 2/4] dt-bindings: arm: SCMI bindings documentation   Etienne Carriere
  • [PATCH v2 3/4] clk: add clock driver for SCMI agents   Etienne Carriere
    • [PATCH v2 3/4] clk: add clock driver for SCMI agents   Simon Glass
  • [PATCH v2 4/4] reset: add reset controller driver for SCMI agents   Etienne Carriere
    • [PATCH v2 4/4] reset: add reset controller driver for SCMI agents   Simon Glass
  • [PATCH v2 1/4] firmware: add new driver for SCMI firmwares   Etienne Carriere
  • [PATCH v2 1/4] firmware: add new driver for SCMI firmwares   Simon Glass
    • [PATCH v2 1/4] firmware: add new driver for SCMI firmwares   Etienne Carriere
      • [PATCH v2 1/4] firmware: add new driver for SCMI firmwares   Simon Glass
• [PATCH v2 1/1] cmd: provide command sbi   Heinrich Schuchardt
  • [PATCH v2 1/1] cmd: provide command sbi   Bin Meng
• [PATCH 0/3] MCU R5F branch-only boot on J7200 SoCs   Suman Anna
  • [PATCH 1/3] env: ti: j721e-evm: Update R5 SPL rproc env variables for J7200   Suman Anna
  • [PATCH 2/3] arm: dts: k3-j7200-r5: Add fs_loader node   Suman Anna
    • [PATCH 2/3] arm: dts: k3-j7200-r5: Add fs_loader node   Suman Anna
  • [PATCH 3/3] configs: j7200_evm_r5: Enable FS_LOADER   Suman Anna
• [PATCH] arm: imx6q_logic: Enable I2C PMIC   Adam Ford
  • [PATCH] arm: imx6q_logic: Enable I2C PMIC   Fabio Estevam
    • [PATCH] arm: imx6q_logic: Enable I2C PMIC   Adam Ford
      • [PATCH] arm: imx6q_logic: Enable I2C PMIC   Fabio Estevam
• [PATCH] pico-imx6: Remove unneeded CONFIG_DM_MDIO   Fabio Estevam
  • [PATCH] pico-imx6: Remove unneeded CONFIG_DM_MDIO   sbabic at denx.de
• [PATCHv3] usb: max3420: add the gadget driver   Jassi Brar
• [PATCH] xilinx: Enable preboot feature for ZynqMP and Versal   Michal Simek
  • [PATCH] xilinx: Enable preboot feature for ZynqMP and Versal   Michal Simek
• [PATCH v2 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622/mt7623   Frank Wunderlich
  • [PATCH v2 01/11] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
  • [PATCH v2 02/11] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
  • [PATCH v2 03/11] phy: mtk-tphy: make shared reg optional for v1   Frank Wunderlich
    • [PATCH v2 03/11] phy: mtk-tphy: make shared reg optional for v1   Chunfeng Yun
  • [PATCH v2 04/11] reset: add basic reset controller for pciesys   Frank Wunderlich
    • [PATCH v2 04/11] reset: add basic reset controller for pciesys   Sam Shih
      • Aw: Re: [PATCH v2 04/11] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH v2 05/11] ahci: mediatek: add ahci driver   Frank Wunderlich
    • [PATCH v2 05/11] ahci: mediatek: add ahci driver   Sam Shih
      • Aw: Re: [PATCH v2 05/11] ahci: mediatek: add ahci driver   Frank Wunderlich
  • [PATCH v2 06/11] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
  • [PATCH v2 07/11] arm: dts: add watchdog-reboot node for mt7622   Frank Wunderlich
  • [PATCH v2 08/11] arm: dts: add dts for Bananapi-R64   Frank Wunderlich
  • [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes   Frank Wunderlich
    • [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes   Chunfeng Yun
      • Aw: Re: [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes   Frank Wunderlich
      • Aw: Re: [PATCH v2 09/11] arm: dts: mt7622: add sata- and asm_sel nodes   Chunfeng Yun
  • [PATCH v2 10/11] arm: dts: mt7622: add USB nodes   Frank Wunderlich
  • [PATCH v2 11/11] arm: dts: mt7623: add USB nodes   Frank Wunderlich
• [PATCH 0/9] Incorrect Kconfig dependencies   Michal Simek
• [PATCH 1/9] pci: kconfig: Setup proper dependency for PCIE_ROCKCHIP   Michal Simek
  • [PATCH 1/9] pci: kconfig: Setup proper dependency for PCIE_ROCKCHIP   Tom Rini
  • [PATCH 1/9] pci: kconfig: Setup proper dependency for PCIE_ROCKCHIP   Tom Rini
• [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt   Michal Simek
  • [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt   Heinrich Schuchardt
    • [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt   Michal Simek
      • [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt   Heinrich Schuchardt
      • [PATCH 2/9] cmd: Kconfig: Add missing dependency for cmd gpt   Tom Rini
• [PATCH 3/9] cmd: Kconfig: Change dependency for CMD_ADC   Michal Simek
  • [PATCH 3/9] cmd: Kconfig: Change dependency for CMD_ADC   Tom Rini
  • [PATCH 3/9] cmd: Kconfig: Change dependency for CMD_ADC   Tom Rini
• [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Michal Simek
  • [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Tom Rini
    • [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Michal Simek
      • [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Tom Rini
      • [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Michal Simek
      • [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Tom Rini
      • [PATCH 4/9] nand: Kconfig: Change dependency for NAND_ARASAN   Michal Simek
• [PATCH 5/9] cmd: Kconfig: Change dependency of CMD_USB_SDP   Michal Simek
  • [PATCH 5/9] cmd: Kconfig: Change dependency of CMD_USB_SDP   Tom Rini
• [PATCH 6/9] arc: Kconfig: Add missing DM dependency   Michal Simek
  • [PATCH 6/9] arc: Kconfig: Add missing DM dependency   Simon Glass
  • [PATCH 6/9] arc: Kconfig: Add missing DM dependency   Tom Rini
• [PATCH 7/9] ARM: zynqmp: Fix SPL_DM_SPI dependencies   Michal Simek
• [PATCH 8/9] cmd: Kconfig: Fix dependencies for CMD_USB_MASS_STORAGE   Michal Simek
  • [PATCH 8/9] cmd: Kconfig: Fix dependencies for CMD_USB_MASS_STORAGE   Tom Rini
• [PATCH 9/9] env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4   Michal Simek
  • [PATCH 9/9] env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4   Tom Rini
  • [PATCH 9/9] env: Kconfig: Add missing dependency for ENV_IS_IN_EXT4   Tom Rini
• [PATCH] virtio_blk: set log2blksz correctly   AKASHI Takahiro
  • [PATCH] virtio_blk: set log2blksz correctly   Bin Meng
  • [PATCH] virtio_blk: set log2blksz correctly   Tom Rini
• [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Marek Behún
  • [EXT] [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Kostya Porotchkin
  • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Stefan Roese
  • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Andre Heider
  • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Andre Heider
    • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Andre Heider
  • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Andre Heider
    • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Marek Behun
  • [PATCH u-boot-marvell] arm64: dts: armada-3720-espressobin: fix COMPHY nodes   Stefan Roese
• [PATCH v3 1/1] cmd: provide command sbi   Heinrich Schuchardt
  • [PATCH v3 1/1] cmd: provide command sbi   Atish Patra
  • [PATCH v3 1/1] cmd: provide command sbi   Bin Meng
• [PATCH 0/5] Follow up to "Add new board: Xen guest for ARM64" series   Anastasiia Lukianenko
  • [PATCH 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function   Anastasiia Lukianenko
    • [PATCH 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function   Tom Rini
  • [PATCH 2/5] MAINTAINERS: Add maintainers to XEN section   Anastasiia Lukianenko
    • [PATCH 2/5] MAINTAINERS: Add maintainers to XEN section   Tom Rini
  • [PATCH 3/5] board: xen: Remove CONFIG_CMD_RUN define as it is set on by default in Kconfig   Anastasiia Lukianenko
    • [PATCH 3/5] board: xen: Remove CONFIG_CMD_RUN define as it is set on by default in Kconfig   Michal Simek
  • [PATCH 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG   Anastasiia Lukianenko
  • [PATCH 5/5] xen: Code style conformity   Anastasiia Lukianenko
    • [PATCH 5/5] xen: Code style conformity   Tom Rini
• [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   Marek Bykowski
  • [PATCHv2] armv8: MMU: Mark code memory Executable, any other Non-Executable   Tom Rini
• [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Pali Rohár
  • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Pali Rohár
    • [EXT] [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Kostya Porotchkin
      • [EXT] [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Stefan Roese
    • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Stefan Roese
      • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Pali Rohár
      • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Stefan Roese
      • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Pali Rohár
      • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Stefan Roese
      • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Pali Rohár
      • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Stefan Roese
    • [EXT] [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Kostya Porotchkin
    • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Andre Heider
    • [PATCH 2/2] arm64: a37xx: pci: Assert PERST# signal when unloading driver   Stefan Roese
  • [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Kostya Porotchkin
    • [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Stefan Roese
  • [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Stefan Roese
  • [EXT] [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Kostya Porotchkin
  • [PATCH] arm64: a37xx: pci: Depends on DM_GPIO   Pali Rohár
    • [PATCH] arm64: a37xx: pci: Depends on DM_GPIO   Stefan Roese
    • [PATCH] arm64: a37xx: pci: Depends on DM_GPIO   Andre Heider
    • [PATCH] arm64: a37xx: pci: Depends on DM_GPIO   Stefan Roese
  • [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Andre Heider
  • [PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT   Stefan Roese
• [PATCH 0/2] arm: mvebu: Espressobin: Add support for SD card   Pali Rohár
  • [PATCH 1/2] mmc: xenon: set signal voltage and max base clock   Pali Rohár
    • [EXT] [PATCH 1/2] mmc: xenon: set signal voltage and max base clock   Kostya Porotchkin
    • [PATCH 1/2] mmc: xenon: set signal voltage and max base clock   Stefan Roese
    • [PATCH 1/2] mmc: xenon: set signal voltage and max base clock   Andre Heider
    • [PATCH 1/2] mmc: xenon: set signal voltage and max base clock   Stefan Roese
  • [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin   Pali Rohár
    • [EXT] [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin   Kostya Porotchkin
    • [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin   Stefan Roese
    • [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin   Andre Heider
    • [PATCH 2/2] arm: dts: a37x0: enable sd card support on espressobin   Stefan Roese
• [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot   Pali Rohár
  • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
    • [EXT] [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Kostya Porotchkin
    • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Stefan Roese
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Stefan Roese
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Stefan Roese
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Stefan Roese
      • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Pali Rohár
    • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Andre Heider
    • [PATCH 2/2] arm: mvebu: Espressobin: Setup MTD partitions when booting kernel   Stefan Roese
  • [EXT] [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot   Kostya Porotchkin
  • [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot   Stefan Roese
  • [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot   Andre Heider
  • [PATCH 1/2] arm: mvebu: Espressobin: Make SPI env offset compatible with Marvell's U-Boot   Stefan Roese
• [PATCH 0/1] fs/squashfs: Fix Coverity Scan defects   Joao Marcos Costa
  • [PATCH 1/1] fs/squashfs: Fix Coverity Scan defects   Joao Marcos Costa
    • [PATCH 1/1] fs/squashfs: Fix Coverity Scan defects   Tom Rini
• [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Adam Ford
  • [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Tom Rini
    • [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Adam Ford
      • [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Tom Rini
      • [PATCH] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Adam Ford
• [PATCH v7 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info   Stefan Roese
• [PATCH v7 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
  • [PATCH v7 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Bin Meng
• [PATCH v7 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()   Stefan Roese
  • [PATCH v7 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()   Simon Glass
• [PATCH v7 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
  • [PATCH v7 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Bin Meng
    • [PATCH v7 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
• [PATCH v7 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Stefan Roese
  • [PATCH v7 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Simon Glass
• [PATCH v7 05/10] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
• [PATCH v7 06/10] xtensa: Remove local no-op dram_init_banksize()   Stefan Roese
• [PATCH v7 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms   Stefan Roese
  • [PATCH v7 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms   Simon Glass
• [PATCH v7 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Stefan Roese
  • [PATCH v7 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Simon Glass
• [PATCH v7 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Stefan Roese
• [PATCH v7 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info   Stefan Roese
  • [PATCH v7 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info   Simon Glass
• [PATCH v1 00/10] mips: octeon: Add bootoctlinux command for Octeon Linux kernel booting   Stefan Roese
  • [PATCH v1 01/10] mips: octeon: octeon-model.h: Enable inclusion from assembler files   Stefan Roese
  • [PATCH v1 02/10] mips: octeon: lowlevel_init.S: Add NMI handling code for SMP Linux booting   Stefan Roese
  • [PATCH v1 03/10] mips: octeon: Add header cvmx-regs.h   Stefan Roese
  • [PATCH v1 04/10] mips: octeon: Add header octeon-feature.h   Stefan Roese
  • [PATCH v1 05/10] mips: octeon: Add header cvmx-fuse.h   Stefan Roese
  • [PATCH v1 06/10] mips: octeon: Add header cvmx-bootinfo.h   Stefan Roese
  • [PATCH v1 07/10] mips: octeon: Add coremask support   Stefan Roese
  • [PATCH v1 08/10] mips: octeon: Add bootmem support   Stefan Roese
  • [PATCH v1 09/10] mips: octeon: Add bootoctlinux command   Stefan Roese
  • [PATCH v1 10/10] mips: octeon: octeon_common.h: Increase CONFIG_SYS_BOOTM_LEN   Stefan Roese
• [PATCH v2 0/8] mips/usb: Add Octeon xHCI USB support   Stefan Roese
  • [PATCH v2 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()   Stefan Roese
    • [PATCH v2 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()   Bin Meng
  • [PATCH v2 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses   Stefan Roese
    • [PATCH v2 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses   Bin Meng
      • [PATCH v2 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses   Stefan Roese
  • [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Stefan Roese
    • [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Bin Meng
      • [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Stefan Roese
      • [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Bin Meng
      • [PATCH v2 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Stefan Roese
  • [PATCH v2 4/8] mips: octeon: cpu.c: Add table for selective swapping   Stefan Roese
  • [PATCH v2 5/8] mips: octeon: Add mangle-port.h   Stefan Roese
  • [PATCH v2 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()   Stefan Roese
  • [PATCH v2 7/8] mips: octeon: Add USB DT nodes   Stefan Roese
    • [PATCH v2 7/8] mips: octeon: Add USB DT nodes   Bin Meng
      • [PATCH v2 7/8] mips: octeon: Add USB DT nodes   Stefan Roese
  • [PATCH v2 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support   Stefan Roese
• [PATCH] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support   Teresa Remmet
  • [PATCH] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support   Tom Rini
    • [PATCH] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support   Teresa Remmet
• [PATCH v2 1/7] riscv: Rework riscv timer driver to only support S-mode   Bin Meng
• [PATCH v2 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Bin Meng
  • [PATCH v2 2/7] riscv: Rework Andes PLMT as a UCLASS_TIMER driver   Sean Anderson
• [PATCH v2 3/7] riscv: Clean up initialization in Andes PLIC   Bin Meng
• [PATCH v2 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Bin Meng
  • [PATCH v2 4/7] riscv: Rework Sifive CLINT as UCLASS_TIMER driver   Sean Anderson
• [PATCH v2 6/7] riscv: Update Kendryte device tree for new CLINT driver   Bin Meng
  • [PATCH v2 6/7] riscv: Update Kendryte device tree for new CLINT driver   Sean Anderson
• [PATCH v2 0/7] riscv: Clean up timer drivers   Bin Meng
• [PATCH v3] i2c: eeprom: Use reg property instead of offset and size   Michal Simek
• [PATCH] xilinx: Fix xlnx,mio_bank property   Michal Simek
• [PATCH] mmc: zynq: Fix default value for xlnx,mio-bank   Michal Simek
• [PATCH] mmc: sdhci: Use upper/lower_32_bits macros   Michal Simek
• [PATCH] clk: versal: Move pm_query_id out of clock driver   Michal Simek
• [PATCH 5/9] xhci-ring.c: Add the poll_pend state to properly abort transactions   Bin Meng
  • [PATCH 5/9] xhci-ring.c: Add the poll_pend state to properly abort transactions   Jason Wessel
• [PATCH 1/2] rockchip: rk3188: Fix the code support for SPL_LED   Kever Yang
  • [PATCH 2/2] rockchip: firefly-rk3288: Fix the code support for SPL_LED   Kever Yang
• [PATCH v3 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>   Frank Wunderlich
  • [PATCH v3 01/11] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
  • [PATCH v3 02/11] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
  • [PATCH v3 03/11] phy: mtk-tphy: make shared reg optional for v1   Frank Wunderlich
  • [PATCH v3 04/11] reset: add basic reset controller for pciesys   Frank Wunderlich
    • Aw: [PATCH v3 04/11] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH v3 05/11] ahci: mediatek: add ahci driver   Frank Wunderlich
  • [PATCH v3 06/11] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
  • [PATCH v3 07/11] arm: dts: add watchdog-reboot node for mt7622   Frank Wunderlich
  • [PATCH v3 08/11] arm: dts: add dts for Bananapi-R64   Frank Wunderlich
  • [PATCH v3 09/11] arm: dts: mt7622: add sata- and asm_sel nodes   Frank Wunderlich
  • [PATCH v3 10/11] arm: dts: mt7622: add USB nodes   Frank Wunderlich
  • [PATCH v3 11/11] arm: dts: mt7623: add USB nodes   Frank Wunderlich
• [PATCH v2 01/15] x86: Introduce USE_EARLY_BOARD_INIT option   Andy Shevchenko
  • [PATCH v2 02/15] x86: advantech: som-db5800-som-6867: Remove dead code   Andy Shevchenko
  • [PATCH v2 04/15] x86: coreboot: Remove dead code   Andy Shevchenko
  • [PATCH v2 05/15] x86: dfi: dfi-bt700: Remove dead code   Andy Shevchenko
  • [PATCH v2 06/15] x86: efi: efi-x86_payload: Remove dead code   Andy Shevchenko
  • [PATCH v2 07/15] x86: intel: bayleybay: Remove dead code   Andy Shevchenko
  • [PATCH v2 08/15] x86: intel: cherryhill: Remove dead code   Andy Shevchenko
  • [PATCH v2 09/15] x86: intel: cougarcanyon2: Remove dead code   Andy Shevchenko
  • [PATCH v2 10/15] x86: intel: crownbay: Remove dead code   Andy Shevchenko
  • [PATCH v2 11/15] x86: intel: edison: Remove dead code   Andy Shevchenko
  • [PATCH v2 12/15] x86: intel: galileo: Remove dead code   Andy Shevchenko
  • [PATCH v2 13/15] x86: intel: minnowmax: Remove dead code   Andy Shevchenko
  • [PATCH v2 14/15] x86: intel: slimbootloader: Remove dead code   Andy Shevchenko
  • [PATCH v2 15/15] x86: qemu: Remove dead code   Andy Shevchenko
• [PATCH v2 03/15] x86: congatec: conga-qeval20-qa3-e3845: Remove dead code   Andy Shevchenko
• [PATCH v4 1/1] cmd: provide command sbi   Heinrich Schuchardt
  • [PATCH v4 1/1] cmd: provide command sbi   Pragnesh Patel
  • [PATCH v4 1/1] cmd: provide command sbi   Pragnesh Patel
    • [PATCH v4 1/1] cmd: provide command sbi   Pragnesh Patel
  • [PATCH v4 1/1] cmd: provide command sbi   Heinrich Schuchardt
    • [PATCH v4 1/1] cmd: provide command sbi   Pragnesh Patel
• [PATCH 1/1] efi_selftest: add a test for ResetSystem()   Heinrich Schuchardt
• [PATCH v4 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>   Frank Wunderlich
  • [PATCH v4 01/11] arm: dts: mt7622: add SATA reset constants   Frank Wunderlich
  • [PATCH v4 02/11] phy: mtk-tphy: add PHY_TYPE_SATA   Frank Wunderlich
  • [PATCH v4 03/11] phy: mtk-tphy: make shared reg optional for v1   Frank Wunderlich
  • [PATCH v4 04/11] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH v4 05/11] ahci: mediatek: add ahci driver   Frank Wunderlich
  • [PATCH v4 06/11] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
  • [PATCH v4 07/11] arm: dts: add watchdog-reboot node for mt7622   Frank Wunderlich
  • [PATCH v4 08/11] arm: dts: add dts for Bananapi-R64   Frank Wunderlich
  • [PATCH v4 09/11] arm: dts: mt7622: add sata- and asm_sel nodes   Frank Wunderlich
  • [PATCH v4 10/11] arm: dts: mt7622: add USB nodes   Frank Wunderlich
  • [PATCH v4 11/11] arm: dts: mt7623: add USB nodes   Frank Wunderlich
• [PATCH] checkpatch.pl: Make fdt / initrd relocation disabling an error   Tom Rini
  • [PATCH] checkpatch.pl: Make fdt / initrd relocation disabling an error   Tom Rini
• [PATCH] ARM: at91: common: guard ATMEL_PIT code by ifdef   Eugen Hristev
• [PATCH v5 00/11] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>   Frank Wunderlich
  • [PATCH v5 2/8] reset: add basic reset controller for pciesys   Frank Wunderlich
  • [PATCH v5 3/8] ahci: mediatek: add ahci driver   Frank Wunderlich
    • Aw: [PATCH v5 3/8] ahci: mediatek: add ahci driver   Frank Wunderlich
  • [PATCH v5 4/8] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
  • [PATCH v5 5/8] arm: dts: add dts for Bananapi-R64   Frank Wunderlich
    • [PATCH v5 5/8] arm: dts: add dts for Bananapi-R64   Frank Wunderlich
  • [PATCH v5 6/8] arm: dts: mt7622: add sata- and asm_sel nodes   Frank Wunderlich
  • [PATCH v5 7/8] arm: dts: mt7622: add USB nodes   Frank Wunderlich
  • [PATCH v5 8/8] arm: dts: mt7623: add USB nodes   Frank Wunderlich
• [PATCH v5 1/8] phy: mtk-tphy: make shared reg optional for v1   Frank Wunderlich
• [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Adam Ford
  • [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Tom Rini
  • [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   Fabio Estevam
  • [PATCH V2] ARM: imx6q_logic: Fix broken booting by moving fdt_addr_r address   sbabic at denx.de
• [GIT PULL] xilinx patches for v2020.10-rc3   Michal Simek
  • [GIT PULL] xilinx patches for v2020.10-rc3   Tom Rini
• [PATCH v6 0/7] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>   Frank Wunderlich
  • [PATCH v6 1/7] phy: mtk-tphy: make shared reg optional for v1   Frank Wunderlich
    • [PATCH v6 1/7] phy: mtk-tphy: make shared reg optional for v1   Tom Rini
  • [PATCH v6 2/7] reset: drop unnecessary comment for pciesys   Frank Wunderlich
    • [PATCH v6 2/7] reset: drop unnecessary comment for pciesys   Tom Rini
  • [PATCH v6 3/7] ahci: mediatek: fix copyright and author-lines   Frank Wunderlich
    • [PATCH v6 3/7] ahci: mediatek: fix copyright and author-lines   Tom Rini
  • [PATCH v6 4/7] clk: mt7622: add needed clocks for ssusb-node   Frank Wunderlich
    • [PATCH v6 4/7] clk: mt7622: add needed clocks for ssusb-node   Tom Rini
  • [PATCH v6 5/7] arm: dts: rename mt7622-bpi-r64.dts   Frank Wunderlich
    • [PATCH v6 5/7] arm: dts: rename mt7622-bpi-r64.dts   Tom Rini
  • [PATCH v6 6/7] arm: dts: mt7622: add USB nodes   Frank Wunderlich
    • [PATCH v6 6/7] arm: dts: mt7622: add USB nodes   Tom Rini
  • [PATCH v6 7/7] arm: dts: mt7623: add USB nodes   Frank Wunderlich
    • [PATCH v6 7/7] arm: dts: mt7623: add USB nodes   Tom Rini
  • [PATCH v6 0/7] Add MTK AHCI driver, BPI-R64 dts and USB-Nodes for mt7622>   Frank Wunderlich
• [PATCH v2 0/5] add custome commands for broadcom NS3 soc   Rayagonda Kokatanur
  • [PATCH v2 1/5] cmd: broadcom: add bnxt boot command   Rayagonda Kokatanur
    • [PATCH v2 1/5] cmd: broadcom: add bnxt boot command   Simon Glass
  • [PATCH v2 2/5] cmd: broadcom: add cmd to update bnxt image env variables   Rayagonda Kokatanur
  • [PATCH v2 3/5] cmd: broadcom: add command for chimp handshake   Rayagonda Kokatanur
  • [PATCH v2 4/5] board: ns3: kconfig: extend board kconfig with specific commands   Rayagonda Kokatanur
  • [PATCH v2 5/5] MAINTAINERS: update maintainers file for new files   Rayagonda Kokatanur
    • [PATCH v2 5/5] MAINTAINERS: update maintainers file for new files   Simon Glass
• [PATCH] video: Add copy_fb_to_hw op   Frederik Aalund
• [PATCH 1/1] fastboot: Fix fastboot reboot fail by changing functions order   Yurii Pidhornyi
• [RESEND PATCH 0/3] clk: Fix ETH initialization on i.MX6Q boards using CCF   Lukasz Majewski
  • [RESEND PATCH 1/3] clk: imx6: Add definition for IMX6QDL_CLK_ENET clock   Lukasz Majewski
  • [RESEND PATCH 2/3] clk: imx: Add support for pllv3 enet clock   Lukasz Majewski
  • [RESEND PATCH 3/3] clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clock   Lukasz Majewski
• [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status   Rayagonda Kokatanur
  • [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status   Simon Glass
    • [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status   Rayagonda Kokatanur
      • [PATCH v1 1/1] board: ns3: check bnxt chimp handshake status   Simon Glass
• [PATCH v5 1/1] cmd: provide command sbi   Heinrich Schuchardt
  • [PATCH v5 1/1] cmd: provide command sbi   Pragnesh Patel
  • [PATCH v5 1/1] cmd: provide command sbi   Rick Chen
• [PATCH 1/1] lib/hashtable: remove superfluous check   Heinrich Schuchardt
  • [PATCH 1/1] lib/hashtable: remove superfluous check   Simon Glass
• [PATCH 1/1] lib: rsa: remove redundant check   Heinrich Schuchardt
  • [PATCH 1/1] lib: rsa: remove redundant check   George McCollister
    • [PATCH 1/1] lib: rsa: remove redundant check   Heinrich Schuchardt
      • [PATCH 1/1] lib: rsa: remove redundant check   Simon Glass
• [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()   Heinrich Schuchardt
  • [PATCH 1/1] lib: rsa: superfluous initialization in rsa_verify()   Simon Glass
• [PATCH 1/1] lib/rsa: correct check after allocation in fdt_add_bignum()   Heinrich Schuchardt
  • [PATCH 1/1] lib/rsa: correct check after allocation in fdt_add_bignum()   Simon Glass
  • [PATCH 1/1] lib/rsa: correct check after allocation in fdt_add_bignum()   Tom Rini
• [PATCH 1/1] test: undefined reference to 'sscanf'   Heinrich Schuchardt
  • [PATCH 1/1] test: undefined reference to 'sscanf'   Tom Rini
• make htmldocs fails with Sphinx 3   Heinrich Schuchardt
• [PATCH v3 0/8] mips/usb: Add Octeon xHCI USB support   Stefan Roese
  • [PATCH v3 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()   Stefan Roese
  • [PATCH v3 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses   Stefan Roese
    • [PATCH v3 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses   Bin Meng
  • [PATCH v3 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Stefan Roese
    • [PATCH v3 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Bin Meng
  • [PATCH v3 4/8] mips: octeon: cpu.c: Add table for selective swapping   Stefan Roese
  • [PATCH v3 5/8] mips: octeon: Add mangle-port.h   Stefan Roese
  • [PATCH v3 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()   Stefan Roese
  • [PATCH v3 7/8] mips: octeon: Add USB DT nodes   Stefan Roese
    • [PATCH v3 7/8] mips: octeon: Add USB DT nodes   Bin Meng
      • [PATCH v3 7/8] mips: octeon: Add USB DT nodes   Stefan Roese
  • [PATCH v3 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support   Stefan Roese
• [PATCH v2] board: phytec: imx8mm: Add PHYTEC phyCORE-i.MX8MM support   Teresa Remmet
• [PATCH v2 0/5] Follow up to "Add new board: Xen guest for ARM64" series   Anastasiia Lukianenko
  • [PATCH v2 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function   Anastasiia Lukianenko
    • [PATCH v2 1/5] board: xen: Remove unnecessary CONFIG_BOARD_EARLY_INIT_F define and board_early_init_f function   Tom Rini
  • [PATCH v2 2/5] MAINTAINERS: Add maintainers to XEN section   Anastasiia Lukianenko
    • [PATCH v2 2/5] MAINTAINERS: Add maintainers to XEN section   Simon Glass
    • [PATCH v2 2/5] MAINTAINERS: Add maintainers to XEN section   Tom Rini
  • [PATCH v2 3/5] board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig   Anastasiia Lukianenko
    • [PATCH v2 3/5] board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig   Simon Glass
    • [PATCH v2 3/5] board: xen: Remove CONFIG_CMD_RUN define and clean xenguest_arm64_defconfig   Tom Rini
  • [PATCH v2 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG   Anastasiia Lukianenko
    • [PATCH v2 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG   Simon Glass
    • [PATCH v2 4/5] board: xen: Remove unnecessary CONFIG_INITRD_TAG and CONFIG_CMDLINE_TAG   Tom Rini
  • [PATCH v2 5/5] xen: Code style conformity   Anastasiia Lukianenko
    • [PATCH v2 5/5] xen: Code style conformity   Simon Glass
    • [PATCH v2 5/5] xen: Code style conformity   Tom Rini
• [PATCH 1/4] clk: clk-imx8mm: Add flexspi clock and fix set parent   Lukasz Majewski
• [PATCH] board/freescale/lsch3: Correct entry for 0.9v   Martin Kaistra
• [PATCH] configs: Enable NVME support for NXP platforms   Wasim Khan
• [PATCH] imx8m: config: convert to bootm_size   Grygorii Tertychnyi
  • [PATCH] imx8m: config: convert to bootm_size   Tom Rini
  • [PATCH] imx8m: config: convert to bootm_size   sbabic at denx.de
• [PATCHv3 00/10] Introduce B1x5v2 support   Sebastian Reichel
  • [PATCHv3 03/10] rtc: m41t62: reset SQW in m41t62_rtc_reset   Sebastian Reichel
  • [PATCHv3 05/10] imx6: allow usage of disable_ldb_di_clock_sources for CONFIG_MX6QDL   Sebastian Reichel
  • [PATCHv3 07/10] board: ge: common: rename ge_common.c to ge_rtc.c   Sebastian Reichel
  • [PATCHv3 08/10] board: ge: common: add config option for RTC and VPD feature   Sebastian Reichel
  • [PATCHv3 09/10] board: ge: common: vpd: separate I2C specific code   Sebastian Reichel
  • [PATCHv3 10/10] board: ge: b1x5v2: Add GE B1x5v2 and B1x5Pv2   Sebastian Reichel
• [PATCHv3 01/10] bootcount: add a DM SPI flash backing store for bootcount   Sebastian Reichel
• [PATCHv3 02/10] gpio: mxc_gpio: add support to read status of output gpios   Sebastian Reichel
  • [PATCHv3 02/10] gpio: mxc_gpio: add support to read status of output gpios   Fabio Estevam
• [PATCHv3 04/10] rtc: m41t62: add oscillator fail bit reset support   Sebastian Reichel
• [PATCHv3 06/10] sysreset: Add poweroff-gpio driver   Sebastian Reichel
• [PATCH] net: add a generic udp protocol   Philippe Reynes
  • [PATCH] net: add a generic udp protocol   Tom Rini
    • [PATCH] net: add a generic udp protocol   Philippe REYNES
• Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
  • Chainloading U-Boot from Fastboot on Tegra30   Tom Rini
    • Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
      • Chainloading U-Boot from Fastboot on Tegra30   Tom Rini
      • Chainloading U-Boot from Fastboot on Tegra30   Stephen Warren
      • Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
      • Chainloading U-Boot from Fastboot on Tegra30   Peter Geis
• [PATCH] board/freescale/common: emc2305: Pass chip_addr to set_fan_speed()   Wasim Khan
• [PATCH v2] board/freescale: emc2305: Pass chip_addr emc2305_init() and set_fan_speed()   Wasim Khan
• [PATCH 0/7] binman: Add support for generating more complex FITs   Simon Glass
  • [PATCH 1/7] binman: Allow entry args to be required   Simon Glass
  • [PATCH 2/7] binman: Fix up a few missing comments   Simon Glass
  • [PATCH 3/7] libfdt: Detected out-of-space with fdt_finish()   Simon Glass
  • [PATCH 4/7] binman: Add support for ATF BL31   Simon Glass
    • [PATCH 4/7] binman: Add support for ATF BL31   Kever Yang
      • [PATCH 4/7] binman: Add support for ATF BL31   Heinrich Schuchardt
    • [PATCH 4/7] binman: Add support for ATF BL31   Heinrich Schuchardt
    • [PATCH 4/7] binman: Add support for ATF BL31   Heinrich Schuchardt
      • [PATCH 4/7] binman: Add support for ATF BL31   Simon Glass
      • [PATCH 4/7] binman: Add support for ATF BL31   Heinrich Schuchardt
  • [PATCH 5/7] binman: Support generating FITs with multiple dtbs   Simon Glass
  • [PATCH 6/7] sunxi: Convert 64-bit boards to use binman   Simon Glass
  • [PATCH 7/7] sunxi: Drop the FIT-generator script   Simon Glass
  • [PATCH 0/7] binman: Add support for generating more complex FITs   Heinrich Schuchardt
    • [PATCH 0/7] binman: Add support for generating more complex FITs   Heinrich Schuchardt
      • [PATCH 0/7] binman: Add support for generating more complex FITs   Simon Glass
      • [PATCH 0/7] binman: Add support for generating more complex FITs   Heinrich Schuchardt
      • [PATCH 0/7] binman: Add support for generating more complex FITs   Simon Glass
• [PATCH] mmc: pic32: PIC32MZDA SDHCI controller non-functional   John Robertson
  • [PATCH] mmc: pic32: PIC32MZDA SDHCI controller non-functional   Daniel Schwierzeck
  • [PATCH] mmc: pic32: PIC32MZDA SDHCI controller non-functional   Jaehoon Chung
• [PATCH 1/1] dm: syscon: typo alerady   Heinrich Schuchardt
  • [PATCH 1/1] dm: syscon: typo alerady   Simon Glass
• [PATCH v2 0/3] efi_loader: rework ResetSystem()   Heinrich Schuchardt
• [PATCH v2 1/3] efi_loader: ResetSystem() should not hang   Heinrich Schuchardt
  • [PATCH v2 1/3] efi_loader: ResetSystem() should not hang   Atish Patra
• [PATCH v2 2/3] efi_selftest: add a test for ResetSystem()   Heinrich Schuchardt
• [PATCH v2 3/3] efi_selftest: substitute ResetSystem() by do_reset()   Heinrich Schuchardt
• [PATCH] mips: dts: Fix PIC32MZDA GPIO register definitions and dtc warnings   John Robertson
  • [PATCH] mips: dts: Fix PIC32MZDA GPIO register definitions and dtc warnings   Daniel Schwierzeck
• [PATCH 0/2][v2] Raspberry pi improvements usb core   Jason Wessel
• [PATCH] ARM: dts: stm32: Adjust PLL4 settings on AV96 again   Marek Vasut
• [PATCH] ARM: dts: stm32: Pull UART4 RX high on AV96   Marek Vasut
• [PATCH v2] dtoc: add coverage test for unicode error   Simon Glass
• [PATCH v5 4/5] test/py: Update test_bind   Simon Glass
• [PATCH v5 2/5] sandbox: phy: add driver_data for bind test cmd   Simon Glass
• [PATCH 1/1] dm: fix ofnode_read_addr/size_cells()   Simon Glass
• Please pull u-boot-dm   Simon Glass
  • Please pull u-boot-dm   Tom Rini
• [PATCH 0/4] efi_loader: validate device path length in boot manager   Heinrich Schuchardt
  • [PATCH 1/4] include: kernel.h: define SSIZE_MAX   Heinrich Schuchardt
  • [PATCH 2/4] efi_loader: efi_dp_check_length()   Heinrich Schuchardt
  • [PATCH 3/4] test: unit test for efi_dp_check_length()   Heinrich Schuchardt
  • [PATCH 4/4] efi_loader: validate device path length in boot manager   Heinrich Schuchardt
• RPi4 U-Boot freeze   Stefan Agner
• [PATCH] Convert CONFIG_NETCONSOLE to Kconfig   Tom Rini
  • [PATCH] Convert CONFIG_NETCONSOLE to Kconfig   Tom Rini
• [PATCH] clk: ccf: Add missing #include <dm/uclass.h> to clk-mux.c   Lukasz Majewski
• [PATCH 1/7] usb: ehci-mx6: Add powerup_fixup implementation   Lukasz Majewski
• [PATCH] arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1   Michal Simek
• [PATCH 1/1] efi_loader: use ':' as separator for setenv -i   Heinrich Schuchardt
• [PATCH v8 00/10] Remove CONFIG_NR_DRAM_BANKS option and bi_memstart/memsize from bd_info   Stefan Roese
• [PATCH v8 01/10] CONFIG_NR_DRAM_BANKS: Remove unreferenced code as its always defined   Stefan Roese
• [PATCH v8 02/10] image: Use gd->ram_base/_size in env_get_bootm_size()   Stefan Roese
• [PATCH v8 03/10] board_f: Add default values for bi_dram[] in dram_init_banksize()   Stefan Roese
• [PATCH v8 04/10] global: Move from bi_memstart/memsize -> gd->ram_base/ram_size   Stefan Roese
• [PATCH v8 05/10] xtensa: Remove arch_setup_bdinfo()   Stefan Roese
• [PATCH v8 06/10] xtensa: Remove local no-op dram_init_banksize()   Stefan Roese
• [PATCH v8 07/10] video: cfb_console.c: Use bi_dram[] values on all platforms   Stefan Roese
• [PATCH v8 08/10] powerpc: Remove bi_memstart & bi_memsize assignments in spl.c   Stefan Roese
• [PATCH v8 09/10] cmd: bdinfo: Remove print of superseeded bi_memstart / bi_memsize values   Stefan Roese
• [PATCH v8 10/10] asm-generic/u-boot.h: Remove bi_memstart & bi_memsize from bd_info   Stefan Roese
• [PATCH] riscv: Add do_irqinfo() for CONFIG_CMD_IRQ   Pragnesh Patel
  • [PATCH] riscv: Add do_irqinfo() for CONFIG_CMD_IRQ   Heinrich Schuchardt
    • [PATCH] riscv: Add do_irqinfo() for CONFIG_CMD_IRQ   Pragnesh Patel
• [PATCH v4 0/8] mips/usb: Add Octeon xHCI USB support   Stefan Roese
  • [PATCH v4 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()   Stefan Roese
  • [PATCH v4 2/8] usb: xhci: xhci_bulk_tx: Don't "BUG" when comparing addresses   Stefan Roese
  • [PATCH v4 3/8] usb: xhci: octeon: Add DWC3 glue layer for Octeon   Stefan Roese
  • [PATCH v4 4/8] mips: octeon: cpu.c: Add table for selective swapping   Stefan Roese
  • [PATCH v4 5/8] mips: octeon: Add mangle-port.h   Stefan Roese
  • [PATCH v4 6/8] mips: octeon: cache.c: Flush all pending writes in flush_dcache_range()   Stefan Roese
  • [PATCH v4 7/8] mips: octeon: Add USB DT nodes   Stefan Roese
  • [PATCH v4 8/8] mips: octeon: octeon_ebb7304_defconfig: Enable USB support   Stefan Roese
• [PATCH] cmd: mem: Remove already removed CONFIG_SYS_MEMTEST_SCRATCH   Michal Simek
  • [PATCH] cmd: mem: Remove already removed CONFIG_SYS_MEMTEST_SCRATCH   Simon Glass
  • [PATCH] cmd: mem: Remove already removed CONFIG_SYS_MEMTEST_SCRATCH   Tom Rini
• Z-Turn board support on U-Boot 2020.10-rc2, got some errors.   Alexandre GRIVEAUX
  • Z-Turn board support on U-Boot 2020.10-rc2, got some errors.   Michal Simek
    • Z-Turn board support on U-Boot 2020.10-rc2, got some errors.   Alexandre GRIVEAUX
      • Z-Turn board support on U-Boot 2020.10-rc2, got some errors.   Michal Simek
• [PATCH] env: kconfig: Add default option for ARCH_ZYNQ   Michal Simek
• [PATCH] net: gem: Add support for more PHYs on MDIO bus   Michal Simek
• [PATCH] xilinx: drivers: Use '_' instead of '-' in driver name   Michal Simek
  • [PATCH] xilinx: drivers: Use '_' instead of '-' in driver name   Simon Glass
• [GIT] Pull request: u-boot-clk (24.08.2020)   Lukasz Majewski
  • [GIT] Pull request: u-boot-clk (24.08.2020)   Tom Rini
• [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses   Pali Rohár
  • [PATCH 2/5] arm: mvebu: Espressobin: Change default loadaddr   Pali Rohár
    • [PATCH 2/5] arm: mvebu: Espressobin: Change default loadaddr   Stefan Roese
  • [PATCH 3/5] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases   Pali Rohár
    • [PATCH 3/5] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases   Stefan Roese
  • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Pali Rohár
    • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Stefan Roese
    • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Pali Rohár
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Pali Rohár
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Pali Rohár
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Pali Rohár
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
      • [PATCH 4/5] arm: mvebu: Espressobin: Define console env   Andre Heider
  • [PATCH 5/5] arm: mvebu: Espressobin: Update README.marvell file   Pali Rohár
    • [PATCH 5/5] arm: mvebu: Espressobin: Update README.marvell file   Stefan Roese
  • [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses   Stefan Roese
  • [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses   Andre Heider
    • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Pali Rohár
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Andre Heider
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Pali Rohár
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Pali Rohár
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Andre Heider
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Pali Rohár
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Pali Rohár
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Andre Heider
      • Espressobin booting (Was: Re: [PATCH 1/5] arm: mvebu: Espressobin: Move env load addresses)   Pali Rohár
  • [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses   Pali Rohár
    • [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr   Pali Rohár
      • [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr   Stefan Roese
      • [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr   Andre Heider
      • [PATCH v2 2/4] arm: mvebu: Espressobin: Change default loadaddr   Stefan Roese
    • [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases   Pali Rohár
      • [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases   Stefan Roese
      • [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases   Andre Heider
      • [PATCH v2 3/4] arm: mvebu: Espressobin: Define fdt_addr and kernel_addr env aliases   Stefan Roese
    • [PATCH v2 4/4] arm: mvebu: Espressobin: Update README.marvell file   Pali Rohár
      • [PATCH v2 4/4] arm: mvebu: Espressobin: Update README.marvell file   Stefan Roese
      • [PATCH v2 4/4] arm: mvebu: Espressobin: Update README.marvell file   Stefan Roese
    • [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses   Andre Heider
      • [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses   Stefan Roese
    • [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses   Stefan Roese
    • [PATCH v2 1/4] arm: mvebu: Espressobin: Move env load addresses   Stefan Roese
• [PATCH] Fix data abort caused by mis-aligning fit data in   Tom Rini
  • [PATCH] Fix data abort caused by mis-aligning fit data in   Reuben Dowle
    • [PATCH] Fix data abort caused by mis-aligning fit data in   Tom Rini
      • [PATCH] Fix data abort caused by mis-aligning fit data in   Reuben Dowle
      • [PATCH] Fix data abort caused by mis-aligning fit data in   Tom Rini
• [PATCH 0/3] RISC-V tracing support   Pragnesh Patel
  • [PATCH 1/3] riscv: Add timer_get_us() for tracing   Pragnesh Patel
  • [PATCH 2/3] riscv: Mark riscv_timer_get_count() and sifive_clint_get_count() with 'notrace'   Pragnesh Patel
  • [PATCH 3/3] riscv: Mark andes_plmt_get_count() with 'notrace'   Pragnesh Patel
• [PATCH] cmd: irq: disable CMD_IRQ for riscv arch   Pragnesh Patel
  • [PATCH] cmd: irq: disable CMD_IRQ for riscv arch   Heinrich Schuchardt
  • [PATCH] cmd: irq: disable CMD_IRQ for riscv arch   Rick Chen
  • [PATCH] cmd: irq: disable CMD_IRQ for riscv arch   Bin Meng
• [PATCH] image: don't exceed gd->ram_top in bootm_size   Baruch Siach
  • [PATCH] image: don't exceed gd->ram_top in bootm_size   Tom Rini
• [PATCH 1/2] ti: Use devtype=mmc instead of setenv devtype mmc   Matwey V. Kornilov
  • [PATCH 2/2] am335x_evm: Allow booting from usb-storage device   Matwey V. Kornilov
• Pull request for UEFI sub-system for efi-2020-10-rc3 (3)   Heinrich Schuchardt
  • Pull request for UEFI sub-system for efi-2020-10-rc3 (3)   Tom Rini
• [v3, 01/11] mmc: add a reinit() API   Jaehoon Chung
• [v3, 02/11] mmc: fsl_esdhc: add a reinit() callback   Jaehoon Chung
• [v3, 05/11] mmc: add a hs400_tuning flag   Jaehoon Chung
  • [v3, 05/11] mmc: add a hs400_tuning flag   Y.b. Lu
• [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Jaehoon Chung
  • [v3, 06/11] mmc: add a mmc_hs400_prepare_ddr() interface   Y.b. Lu
• [PATCH 0/3] net: tftp: Fixes for tftp rollover   Ley Foon Tan
  • [PATCH 1/3] net: tftp: Fix tftp_prev_block counter update   Ley Foon Tan
  • [PATCH 2/3] net: tftp: Fix store_block offset calculation   Ley Foon Tan
  • [PATCH 3/3] net: tftp: Fix load_block offset calculation   Ley Foon Tan
• Pull request: u-boot-riscv/master 20200825   uboot at andestech.com
  • Pull request: u-boot-riscv/master 20200825   Tom Rini
• [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Heinrich Schuchardt
  • [PATCH v3 1/1] arm: sunxi: increase SYS_MALLOC_F_LEN   Simon Glass
• [PATCH] i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support   Heiko Schocher
  • [PATCH] i2c: octeon_i2c: Misc fixes for ARM Octeon TX2 support   Heiko Schocher
• [PATCH] MAINTAINERS: update clk entry git tree   Baruch Siach
• Pull request: u-boot-rockchip-20200820   Kever Yang
  • Pull request: u-boot-rockchip-20200820   Tom Rini
• [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform   meenakshi.aggarwal at nxp.com
  • [EXT] [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform   Kuldeep Singh
    • [EXT] [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform   Meenakshi Aggarwal
  • [PATCH] armv8: lx2162aqds: Add support for LX2162AQDS platform   Priyanka Jain
• [PATCH 00/31] Add DM support for omap PWM backlight   Dario Binacchi
• [PATCH 01/31] clk: remove a redundant header   Dario Binacchi
  • [PATCH 01/31] clk: remove a redundant header   Simon Glass
• [PATCH 02/31] clk: export generic routines   Dario Binacchi
  • [PATCH 02/31] clk: export generic routines   Simon Glass
• [PATCH 03/31] arch: sandbox: fix typo in clk.h   Dario Binacchi
  • [PATCH 03/31] arch: sandbox: fix typo in clk.h   Simon Glass
• [PATCH 04/31] clk: add clk_round_rate()   Dario Binacchi
  • [PATCH 04/31] clk: add clk_round_rate()   Simon Glass
    • [PATCH 04/31] clk: add clk_round_rate()   Sean Anderson
      • [PATCH 04/31] clk: add clk_round_rate()   Sean Anderson
      • [PATCH 04/31] clk: add clk_round_rate()   Dario Binacchi
• [PATCH 05/31] clk: ti: add mux clock driver   Dario Binacchi
• [PATCH 06/31] arm: ti: am33xx: add DPLL_EN_FAST_RELOCK_BYPASS macro   Dario Binacchi
• [PATCH 07/31] clk: ti: am33xx: add DPLL clock drivers   Dario Binacchi
• [PATCH 08/31] clk: ti: add divider clock driver   Dario Binacchi
• [PATCH 09/31] clk: ti: refactor mux and divider clock drivers   Dario Binacchi
• [PATCH 10/31] clk: ti: add gate clock driver   Dario Binacchi
• [PATCH 11/31] ti: am33xx: fix do_enable_clocks() to accept NULL parameters   Dario Binacchi
  • [PATCH 11/31] ti: am33xx: fix do_enable_clocks() to accept NULL parameters   Simon Glass
• [PATCH 12/31] clk: ti: add support for clkctrl clocks   Dario Binacchi
• [PATCH 13/31] clk: ti: move drivers to 'ti' directory   Dario Binacchi
• [PATCH 14/31] clk: ti: omap4: add clock manager driver   Dario Binacchi
• [PATCH 15/31] clk: ti: am335x: add clock manager driver   Dario Binacchi
• [PATCH 16/31] fdt: translate address if #size-cells = <0>   Dario Binacchi
  • [PATCH 16/31] fdt: translate address if #size-cells = <0>   Simon Glass
• [PATCH 17/31] omap: timer: fix the rate setting   Dario Binacchi
• [PATCH 18/31] misc: am33xx: add control module driver   Dario Binacchi
• [PATCH 19/31] pwm: ti: am33xx: add enhanced pwm driver   Dario Binacchi
• [PATCH 20/31] pwm: ti: am33xx: add subsystem driver   Dario Binacchi
• [PATCH 21/31] video: backlight: fix pwm's duty cycle calculation   Dario Binacchi
  • [PATCH 21/31] video: backlight: fix pwm's duty cycle calculation   Simon Glass
• [PATCH 22/31] video: backlight: fix pwm data structure description   Dario Binacchi
• [PATCH 23/31] dm: core: improve uclass_get_device_by_phandle_id() description   Dario Binacchi
  • [PATCH 23/31] dm: core: improve uclass_get_device_by_phandle_id() description   Simon Glass
• [PATCH 24/31] gpio: fix gpio_request_by_name() description   Dario Binacchi
  • [PATCH 24/31] gpio: fix gpio_request_by_name() description   Simon Glass
• [PATCH 25/31] dm: core: add a function to decode display timings   Dario Binacchi
  • [PATCH 25/31] dm: core: add a function to decode display timings   Simon Glass
• [PATCH 26/31] video: omap: add panel driver   Dario Binacchi
• [PATCH 27/31] video: omap: enable LCD clock domain through DM API   Dario Binacchi
  • [PATCH 28/31] video: omap: set LCD clock rate through DM API   Dario Binacchi
  • [PATCH 29/31] video: omap: split the legacy code from the DM code   Dario Binacchi
  • [PATCH 30/31] video: omap: move drivers to 'ti' directory   Dario Binacchi
  • [PATCH 31/31] board: ti: am335x-ice: get CDCE913 clock device   Dario Binacchi
• [PATCH] x86: qemu-x86_defconfig: Increase CONFIG_SYS_MALLOC_F_LEN   Stefan Roese
  • [PATCH] x86: qemu-x86_defconfig: Increase CONFIG_SYS_MALLOC_F_LEN   Simon Glass
• [PATCH] usb: gadget: ether: Fix warnings about unused code   Lukasz Majewski
  • [PATCH] usb: gadget: ether: Fix warnings about unused code   Tom Rini
• [PATCH v2 1/3] fdtdec: optionally add property no-map to created reserved memory node   Patrice Chotard
  • [PATCH v2 1/3] fdtdec: optionally add property no-map to created reserved memory node   Patrice CHOTARD
  • [PATCH v2 1/3] fdtdec: optionally add property no-map to created reserved memory node   Rick Chen
• [PATCH v2 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter   Patrice Chotard
• [PATCH v2 3/3] optee: add property no-map to secure reserved memory   Patrice Chotard
• [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks   Rasmus Villemoes
  • [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks   Tom Rini
    • [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks   Rasmus Villemoes
      • [PATCH U-Boot] scripts/setlocalversion: Improve -dirty check with git-status --no-optional-locks   Tom Rini
  • [PATCH v2] scripts/setlocalversion: sync with linux 5.8   Rasmus Villemoes
    • [PATCH v2] scripts/setlocalversion: sync with linux 5.8   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
  • [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [PATCH v3 1/3] fdtdec: optionally add property no-map to created reserved memory node   Patrice Chotard
  • [PATCH v3 1/3] fdtdec: optionally add property no-map to created reserved memory node   Heinrich Schuchardt
• [PATCH v3 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter   Patrice Chotard
  • [PATCH v3 2/3] test: fdtdec: Add test for new no-map fdtdec_add_reserved_memory() parameter   Simon Glass
• [PATCH v3 3/3] optee: add property no-map to secure reserved memory   Patrice Chotard
• [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200825   Stefano Babic
  • [GIT PULL] Pull request: u-boot-imx u-boot-imx-20200825   Tom Rini
• [PATCH 1/1] fs: convert error and debug messages to log   Heinrich Schuchardt
  • [PATCH 1/1] fs: convert error and debug messages to log   Simon Glass
• [PATCH] efi_loader: log function in image loader   Heinrich Schuchardt
• [PATCH v2 1/1] board: ns3: check bnxt chimp handshake status   Rayagonda Kokatanur
  • [PATCH v2 1/1] board: ns3: check bnxt chimp handshake status   Simon Glass
• [PATCH 0/3] binman: Make FIT image subentries respect offset, alignment and padding   Alper Nebi Yasak
  • [PATCH 1/3] binman: Ignore hash*, signature* nodes in sections   Alper Nebi Yasak
    • [PATCH 1/3] binman: Ignore hash*, signature* nodes in sections   Simon Glass
  • [PATCH 2/3] binman: Respect pad-before property of section subentries   Alper Nebi Yasak
    • [PATCH 2/3] binman: Respect pad-before property of section subentries   Simon Glass
  • [PATCH 3/3] binman: Build FIT image subentries with the section etype   Alper Nebi Yasak
    • [PATCH 3/3] binman: Build FIT image subentries with the section etype   Simon Glass
      • [PATCH 3/3] binman: Build FIT image subentries with the section etype   Alper Nebi Yasak
      • [PATCH 3/3] binman: Build FIT image subentries with the section etype   Simon Glass
      • [PATCH 3/3] binman: Build FIT image subentries with the section etype   Alper Nebi Yasak
      • [PATCH 3/3] binman: Build FIT image subentries with the section etype   Simon Glass
• ext2ls zero-length directory entries?   Joe Buehler
• [PATCH v5 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
  • [PATCH v5 1/2] board: kontron: add sl28 support   Michael Walle
    • [EXT] [PATCH v5 1/2] board: kontron: add sl28 support   Kuldeep Singh
  • [PATCH v5 2/2] board: sl28: add board specific nvm command   Michael Walle
• Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Stefan Roese
  • Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Tom Rini
    • Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Stefan Roese
      • Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Tom Rini
      • Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Peter Robinson
      • Please pull u-boot-marvell/remove-config-nr-dram-banks-v9-2020-08-26   Tom Rini
• [PATCH] fastboot: getvar: fix partition-size return value   Gary Bisson
  • [PATCH] fastboot: getvar: fix partition-size return value   Lukasz Majewski
    • [PATCH] fastboot: getvar: fix partition-size return value   Gary Bisson
      • [PATCH] fastboot: getvar: fix partition-size return value   Lukasz Majewski
      • [PATCH] fastboot: getvar: fix partition-size return value   Gary Bisson
• [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
  • [PATCH RESEND v2 03/11] usb: xhci: add quirks flag to support MediaTek xHCI 0.96   Chunfeng Yun
  • [PATCH RESEND v2 05/11] usb: xhci: convert to TRB_TYPE()   Chunfeng Yun
  • [PATCH v2 RESEND 06/11] usb: xhci: convert to TRB_INTR_TARGET()   Chunfeng Yun
  • [PATCH RESEND v2 08/11] usb: xhci: convert to TRB_TX_TYPE()   Chunfeng Yun
  • [PATCH RESEND v2 09/11] usb: xhci: convert to EP_TYPE()   Chunfeng Yun
  • [PATCH RESEND v2 10/11] usb: xhci: use macros with parameter to fill ep_info2   Chunfeng Yun
  • [PATCH RESEND v2 11/11] usb: xhci: convert to readx_poll_sleep_timeout()   Chunfeng Yun
  • Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Frank Wunderlich
    • Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Marek Vasut
      • Aw: [PATCH RESEND v2 01/11] usb: xhci: add a member hci_version in xhci_ctrl struct   Chunfeng Yun
• [PATCH RESEND v2 02/11] usb: xhci: create one unified function to calculate TRB TD remainder.   Chunfeng Yun
• [PATCH RESEND v2 04/11] usb: xhci: convert to HCS_MAX_PORTS()   Chunfeng Yun
• [PATCH v2 RESEND 07/11] usb: xhci: convert to TRB_LEN()   Chunfeng Yun
• u-boot 2015.4 & 2015.10 can't determine partition table on samsung emmc (error -19)   Eugene Kruglikov
• [PATCH v3] mtd: nand: Add NAND controller driver for OcteonTX   Stefan Roese
• [PATCH v3] net: Add NIC controller driver for OcteonTX   Stefan Roese
• [PATCH v3] net: Add NIC controller driver for OcteonTX2   Stefan Roese
• [PATCH] binman: Call helper function binman_set_rom_offset() to fill offset   Michal Simek
  • [PATCH] binman: Call helper function binman_set_rom_offset() to fill offset   Simon Glass
• [PATCH] binman: Fix typo in kernel-doc format for binman_symname()   Michal Simek
  • [PATCH] binman: Fix typo in kernel-doc format for binman_symname()   Simon Glass
• [PATCH V2 1/7] env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set   Alex Kiernan
• [PATCH 1/6] ARM: mach-at91: add support for new SoC sama7g5   Eugen Hristev
  • [PATCH 3/6] mmc: atmel-sdhci: add sama7g5-sdhci compatibility string   Eugen Hristev
  • [PATCH 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value   Eugen Hristev
  • [PATCH 5/6] mmc: atmel-sdhci: enable the required generic clock   Eugen Hristev
  • [PATCH 6/6] mmc: atmel-sdhci: use mmc_of_parse to get the DT properties   Eugen Hristev
• [PATCH 2/6] pinctrl: at91-pio4: add compatible for sama7g5 pinctrl block   Eugen Hristev
• [PATCH v2 1/1] timer: dw-apb: fix compiler warnings   Heinrich Schuchardt
  • [PATCH v2 1/1] timer: dw-apb: fix compiler warnings   Sean Anderson
    • [PATCH v2 1/1] timer: dw-apb: fix compiler warnings   Heinrich Schuchardt
• [ANN] U-Boot v2020.10-rc3 released   Tom Rini
• [PATCH v2] fastboot: getvar: fix partition-size return value   Gary Bisson
  • [PATCH v2 1/6] ARM: mach-at91: add support for new SoC sama7g5   Eugen Hristev
• [PATCH v2 2/6] pinctrl: at91-pio4: add compatible for sama7g5 pinctrl block   Eugen Hristev
  • [PATCH v2 3/6] mmc: atmel-sdhci: add sama7g5-sdhci compatibility string   Eugen Hristev
    • [PATCH v2 3/6] mmc: atmel-sdhci: add sama7g5-sdhci compatibility string   Peng Fan
• [PATCH] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.   haibo.chen at nxp.com
• [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value   Eugen Hristev
  • [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value   Eugen Hristev
    • [PATCH v2 4/6] mmc: atmel-sdhci: do not check clk_set_rate return value   Peng Fan
  • [PATCH v2 5/6] mmc: atmel-sdhci: enable the required generic clock   Eugen Hristev
    • [PATCH v2 5/6] mmc: atmel-sdhci: enable the required generic clock   Peng Fan
  • [PATCH v2 6/6] mmc: atmel-sdhci: use mmc_of_parse to get the DT properties   Eugen Hristev
    • [PATCH v2 6/6] mmc: atmel-sdhci: use mmc_of_parse to get the DT properties   Peng Fan
• [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Alex Kiernan
  • [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Marek Vasut
    • [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Tom Rini
      • [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Alex Kiernan
      • [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Alex Kiernan
      • [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Marek Vasut
      • [PATCH] Revert "env: Warn on force access if ENV_ACCESS_IGNORE_FORCE set"   Alex Kiernan
• [PATCH v2] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.   haibo.chen at nxp.com
  • [PATCH v2] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.   Peng Fan
• [PATCH v4 1/2] arch: arm: use dt and UCLASS_IRQ to get gic details   Stefan Roese
• [PATCH] board: xilinx: Enable changing default DTB pick up address   Michal Simek
• [PATCH] microblaze: Add support for little/big endian in/out api's   Michal Simek
• [PATCH] configs: xilinx: Enable configs required for ubifs   Michal Simek
• [PATCH] xilinx: Enable uartlite driver for Versal/ZynqMP   Michal Simek
• [PATCH] serial: uartlite: Add support to work with any endianness   Michal Simek
• [PATCH] arm64: zynqmp: Correct value of shunt resistor for VCCINT and VCC_SOC   Michal Simek
• [PATCH] arm64: zynqmp: Add device tree node for 2nd mux on I2C1 bus   Michal Simek
• [PATCH] xilinx: kconfig: Move sourcing of board Kconfig to mach folders   Michal Simek
• [PATCH v2] board: freescale: emc2305: Pass chip_addr to set_fan_speed   Wasim Khan
• [PATCH] ti: common: Remove additional i2c read for board detection   Michal Simek
  • [PATCH] ti: common: Remove additional i2c read for board detection   Lokesh Vutla
• [PATCH v2] configs: Enable NVME support for Layerscape platforms   Wasim Khan
• RISCV64 - u-boot FDT control address unset on qemu-riscv64_defconfig ?   Alexander von Gluck IV
  • RISCV64 - u-boot FDT control address unset on qemu-riscv64_defconfig ?   Alexander von Gluck IV
• [PATCH v2] common: Kconfig: Add dependency for default variables strings   Michal Simek
• [PATCH] efi_loader: consider no-map property of reserved memory   Heinrich Schuchardt
  • [PATCH] efi_loader: consider no-map property of reserved memory   Atish Patra
• [PATCH 1/1] efi: clean up efi command   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: error message if image not authenticated   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: remove duplicate image size check   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: check for image truncation   Heinrich Schuchardt
  • [PATCH 1/1] efi_loader: check for image truncation   AKASHI Takahiro
• [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses   Soeren Moch
  • [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Soeren Moch
    • [PATCH 2/2] board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfig   Fabio Estevam
  • [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses   Fabio Estevam
  • [PATCH 1/2] board: tbs2910: Use recommended distroboot addresses   Tom Rini
• [GIT] Pull request: u-boot-dfu (27.08.2019)   Lukasz Majewski
  • [GIT] Pull request: u-boot-dfu (27.08.2019)   Marek Vasut
    • [GIT] Pull request: u-boot-dfu (27.08.2019)   Lukasz Majewski
      • [GIT] Pull request: u-boot-dfu (27.08.2019)   Marek Vasut
  • [GIT] Pull request: u-boot-dfu (30.08.2019)   Lukasz Majewski
• [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
  • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Marek Vasut
    • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Heinrich Schuchardt
      • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Marek Vasut
      • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Lukasz Majewski
      • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Marek Vasut
      • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Lukasz Majewski
      • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Tom Rini
    • [PATCH v2 1/1] dfu: remove UPDATE_TFTP   Lukasz Majewski
• [PATCH 1/1] efi_selftest: simplify Makefile   Heinrich Schuchardt
• [PATCH 0/3] Rename ASPEED SoC clock name   Ryan Chen
  • [PATCH 1/3] cosmetic: aspeed: ast2500: Rename clock header   Ryan Chen
  • [PATCH 2/3] aspeed:clock: Sync with Linux kernel clock header define   Ryan Chen
  • [PATCH 3/3] cosmetic: aspeed: Modify for SPDX-License   Ryan Chen
  • [PATCH 0/3] Rename ASPEED SoC clock name   Cédric Le Goater
    • [PATCH 0/3] Rename ASPEED SoC clock name   Ryan Chen
  • [PATCH v2 0/3] Rename ASPEED SoC clock name   Ryan Chen
    • [PATCH v2 1/3] cosmetic: aspeed: ast2500: Rename clock header   Ryan Chen
    • [PATCH v2 2/3] clock:aspeed: Sync with Linux kernel clock header define   Ryan Chen
    • [PATCH v2 3/3] cosmetic: aspeed: Modify for SPDX-License   Ryan Chen
• [PATCH 1/1] Remove not used export function header.   Ryan Chen
• Not able to boot SPL+U-boot.img through SPI NOR Flash on imx6 based board   nvmurali
• Missing BMP 565RGB video support   Trommel, Kees (Contractor)
• [PATCH] phy: marvell: a3700: add sata comphy on lane 2 with invert option   Andre Heider
  • [PATCH] phy: marvell: a3700: add sata comphy on lane 2 with invert option   Pali Rohár
• [PATCH] bcmgenet: fix DMA buffer management   Petr Tesarik
• [PATCH v1 1/2] colibri-imx8qxp: rename all occurences to colibri-imx8x   Igor Opaniuk
  • [PATCH v1 2/2] apalis-imx8qm: rename all occurences to apalis-imx8   Igor Opaniuk
• [PATCH] efi: change usage syntax   Maxim Uvarov
• [RFC PATCH 1/2] efi: arm: do not overlap non ram memory on efi allocation   Maxim Uvarov
  • [RFC PATCH 2/2] efi_memory: refine overlap_only_ram description   Maxim Uvarov
• [PATCH 0/2] iEi Puzzle-M801 board support   Luka Kovacic
  • [PATCH 1/2] arm: mvebu: Initial iEi Puzzle-M801 support   Luka Kovacic
  • [PATCH 2/2] arm: mvebu: mvebu_armada-8k: Add support for initializing iEi Puzzle-M801 networking   Luka Kovacic
• NVMe boot issues on RockPro64   Punit Agrawal
  • NVMe boot issues on RockPro64   Bin Meng
    • NVMe boot issues on RockPro64   Punit Agrawal
• Sections .dynamic and .dynsym in UEFI binaries   Heinrich Schuchardt
  • Sections .dynamic and .dynsym in UEFI binaries   Simon Glass
• [PATCH 1/2] ARM: rmobile: Enable RPC on Salvator-X, ULCB, Ebisu   Marek Vasut
• [PATCH 2/2] ARM: rmobile: Enable dfu tftp on Gen3   Marek Vasut
• [PATCH 1/2] binman: Use pkg_resources to find resources   Simon Glass
  • [PATCH 2/2] tools: Drop unnecessary use of __file__   Simon Glass
• [PATCH v1 25/43] x86: gpio: Add support for obtaining ACPI info for a GPIO   Simon Glass
• [PATCH v4 12/35] acpi: Support generation of SPI descriptor   Simon Glass
• [PATCH v3 03/10] x86: apl: Set the correct boot mode in the FSP-M code   Simon Glass
• [PATCH 0/2] x86: Minor nits from previous reviews   Simon Glass
  • [PATCH 1/2] x86: pinctrl: Fix 'relatove' typo   Simon Glass
  • [PATCH 2/2] x86: Drop nhlt_serialise()   Simon Glass
• [PATCH v2 00/16] x86: zboot: Enhance the 'zboot' command   Simon Glass
  • [PATCH v2 01/16] x86: Update the bootparam header   Simon Glass
  • [PATCH v2 02/16] x86: zimage: Use a state struct to hold the state   Simon Glass
  • [PATCH v2 03/16] x86: zimage: Avoid using #ifdef   Simon Glass
  • [PATCH v2 04/16] x86: zboot: Move kernel-version code into a function   Simon Glass
  • [PATCH v2 05/16] x86: zboot: Correct image type   Simon Glass
  • [PATCH v2 06/16] x86: zimage: Disable interrupts just before booting   Simon Glass
  • [PATCH v2 07/16] x86: zboot: Set up a sub-command structure   Simon Glass
    • [PATCH v2 07/16] x86: zboot: Set up a sub-command structure   Wolfgang Wallner
  • [PATCH v2 08/16] x86: zboot: Add a 'go' subcommand   Simon Glass
  • [PATCH v2 09/16] x86: zboot: Add an 'info' subcommand   Simon Glass
  • [PATCH v2 10/16] x86: zboot: Add an 'setup' subcommand   Simon Glass
  • [PATCH v2 11/16] x86: zboot: Set environment variables for image locations   Simon Glass
  • [PATCH v2 12/16] x86: zboot: Allow setting a separate setup base address   Simon Glass
  • [PATCH v2 13/16] x86: zboot: Add an option to dump the setup information   Simon Glass
  • [PATCH v2 14/16] x86: zboot: Allow overriding the command line   Simon Glass
  • [PATCH v2 15/16] cros: Update chromium documentation   Simon Glass
  • [PATCH v2 16/16] cros: Add information about booting Chrome OS on x86   Simon Glass
• [PATCH v2 00/57] dm: Add programatic generation of ACPI tables (part D)   Simon Glass
  • [PATCH v2 00/57] dm: Add programatic generation of ACPI tables (part D)   Simon Glass
    • [PATCH v2 01/57] x86: acpi: Add cros_ec tables   Simon Glass
    • [PATCH v2 02/57] x86: acpi: Add base asl files for common x86 devices   Simon Glass
    • [PATCH v2 03/57] x86: acpi: apl: Add asl files for Apollo Lake   Simon Glass
    • [PATCH v2 04/57] x86: acpi: Add DPTF asl files   Simon Glass
    • [PATCH v2 05/57] x86: apl: Correct PCIE_ECAM_BASE   Simon Glass
    • [PATCH v2 06/57] x86: Add a config for the systemagent PCIEX regions size   Simon Glass
    • [PATCH v2 07/57] x86: Add a common global NVS structure   Simon Glass
    • [PATCH v2 08/57] x86: acpi: Support external GNVS tables   Simon Glass
    • [PATCH v2 09/57] x86: acpi: Expand the GNVS   Simon Glass
    • [PATCH v2 10/57] x86: coral: Add ACPI tables for coral   Simon Glass
    • [PATCH v2 11/57] acpi: Add support for writing a _PRW   Simon Glass
    • [PATCH v2 12/57] acpi: Add support for conditions and return values   Simon Glass
    • [PATCH v2 13/57] acpi: Support generating a multi-function _DSM for devices   Simon Glass
    • [PATCH v2 14/57] dm: acpi: Use correct GPIO polarity type in acpi_dp_add_gpio()   Simon Glass
    • [PATCH v2 15/57] x86: link: Allow more space for U-Boot   Simon Glass
    • [PATCH v2 16/57] i2c: Add a generic driver to generate ACPI info   Simon Glass
      • [PATCH v2 16/57] i2c: Add a generic driver to generate ACPI info   Heiko Schocher
      • [PATCH v2 16/57] i2c: Add a generic driver to generate ACPI info   Andy Shevchenko
    • [PATCH v2 17/57] x86: Add wake sources for the acpi_gpe driver   Simon Glass
    • [PATCH v2 18/57] x86: apl: Support writing the IntelGraphicsMem table   Simon Glass
    • [PATCH v2 19/57] x86: acpi: Add a common routine to write WiFi info   Simon Glass
    • [PATCH v2 20/57] x86: Add some definitions for SMM   Simon Glass
    • [PATCH v2 21/57] x86: apl: Add power-management definitions   Simon Glass
    • [PATCH v2 22/57] x86: apl: Update iomap for ACPI   Simon Glass
    • [PATCH v2 23/57] x86: Add a few common Intel CPU functions   Simon Glass
    • [PATCH v2 24/57] x86: acpi: Support generation of the HPET table   Simon Glass
    • [PATCH v2 25/57] x86: acpi: Support generation of the DBG2 table   Simon Glass
    • [PATCH v2 26/57] acpi: Add support for generating processor tables   Simon Glass
    • [PATCH v2 27/57] x86: acpi: Add PCT and PTC tables   Simon Glass
    • [PATCH v2 28/57] acpi: Add more support for generating processor tables   Simon Glass
    • [PATCH v2 29/57] x86: acpi: Add common Intel ACPI tables   Simon Glass
    • [PATCH v2 30/57] x86: Support Atom SoCs using SWSMISCI rather than the SWSCI   Simon Glass
    • [PATCH v2 31/57] x86: acpi: Add support for additional Intel tables   Simon Glass
    • [PATCH v2 32/57] x86: apl: Allow reading hostbridge base addresses   Simon Glass
    • [PATCH v2 33/57] p2sb: Add some definitions used for ACPI   Simon Glass
    • [PATCH v2 34/57] x86: apl: Generate required ACPI tables   Simon Glass
    • [PATCH v2 35/57] x86: apl: Add support for hostbridge ACPI generation   Simon Glass
    • [PATCH v2 36/57] x86: apl: Generate CPU tables   Simon Glass
    • [PATCH v2 37/57] x86: apl: Generate ACPI table for LPC   Simon Glass
    • [PATCH v2 38/57] x86: apl: Drop unnecessary code in PMC driver   Simon Glass
    • [PATCH v2 39/57] tpm: cr50: Add ACPI support   Simon Glass
    • [PATCH v2 40/57] x86: fsp: Update the FSP API with the end-firmware method   Simon Glass
    • [PATCH v2 41/57] x86: cpu: Report address width from cpu_get_info()   Simon Glass
    • [PATCH v2 42/57] x86: Sort the MTRR table   Simon Glass
    • [PATCH v2 43/57] x86: Notify the FSP of the 'end firmware' event   Simon Glass
    • [PATCH v2 44/57] x86: Correct the assembly guard in e820.h   Simon Glass
    • [PATCH v2 45/57] x86: Add a header guard to asm/acpi_table.h   Simon Glass
    • [PATCH v2 46/57] x86: Correct handling of MADT table CPUs   Simon Glass
    • [PATCH v2 47/57] acpi: tpm: Add a TPM2 table   Simon Glass
    • [PATCH v2 48/57] acpi: tpm: Add a TPM1 table   Simon Glass
    • [PATCH v2 49/57] x86: acpi: Set the log category for x86 table generation   Simon Glass
    • [PATCH v2 50/57] x86: coral: Add audio descriptor files   Simon Glass
    • [PATCH v2 51/57] x86: apl: Check low-level init in FSP-S pre-init   Simon Glass
    • [PATCH v2 52/57] x86: fsp: Add more debugging for silicon init   Simon Glass
    • [PATCH v2 53/57] x86: fsp: Show FSP-S or FSP-M address in fsp_get_header()   Simon Glass
    • [PATCH v2 54/57] acpi: Use defines for field lengths   Simon Glass
    • [PATCH v2 55/57] x86: Add a way to add to the e820 memory table   Simon Glass
    • [PATCH v2 56/57] x86: Move include of bitops out of ACPI region   Simon Glass
    • [PATCH v2 57/57] x86: coral: Update config and device tree for ACPI   Simon Glass
• Q: sp805 watchdog is only for fsl ?   Ran Shalit
• [PATCH 1/1] bootm: update image OS image size when decompressing   Heinrich Schuchardt
  • [PATCH 1/1] bootm: update image OS image size when decompressing   Simon Glass
• Can't boot from sd-card on BeagleBone Black   Pavel Yermolenko
  • Can't boot from sd-card on BeagleBone Black   Peter Robinson
    • Can't boot from sd-card on BeagleBone Black   Pavel Yermolenko
    • Can't boot from sd-card on BeagleBone Black   Pavel Yermolenko
• [PATCH v6 0/2] Basic Kontron SMARC-sAL28 board support   Michael Walle
  • [PATCH v6 1/2] board: kontron: add sl28 support   Michael Walle
    • [PATCH v6 1/2] board: kontron: add sl28 support   Tom Rini
  • [PATCH v6 2/2] board: sl28: add board specific nvm command   Michael Walle
• [PATCH v2 00/11] binman: Add support for generating more complex FITs   Simon Glass
  • [PATCH v2 01/11] binman: Allow entry args to be required   Simon Glass
  • [PATCH v2 02/11] binman: Fix up a few missing comments   Simon Glass
  • [PATCH v2 03/11] libfdt: Detected out-of-space with fdt_finish()   Simon Glass
  • [PATCH v2 04/11] binman: Move 'external' support into base class   Simon Glass
  • [PATCH v2 05/11] binman: Add support for ATF BL31   Simon Glass
  • [PATCH v2 06/11] binman: Support generating FITs with multiple dtbs   Simon Glass
  • [PATCH v2 07/11] Makefile: Support missing external blobs always   Simon Glass
  • [PATCH v2 08/11] binman: Allow FITs to be missing binaries   Simon Glass
  • [PATCH v2 09/11] sunxi: Convert 64-bit boards to use binman   Simon Glass
    • [PATCH v2 09/11] sunxi: Convert 64-bit boards to use binman   Heinrich Schuchardt
      • [PATCH v2 09/11] sunxi: Convert 64-bit boards to use binman   Simon Glass
  • [PATCH v2 10/11] sunxi: Drop the FIT-generator script   Simon Glass
  • [PATCH v2 11/11] binman: Allow selecting default FIT configuration   Simon Glass
• [PATCH 1/2] xenon_sdhci: support for HS200 mode   Andre Heider
  • [PATCH 1/2] xenon_sdhci: support for HS200 mode   Pali Rohár
    • [PATCH 1/2] xenon_sdhci: support for HS200 mode   Andre Heider
      • [PATCH 1/2] xenon_sdhci: support for HS200 mode   Pali Rohár
• [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver   Andre Heider
  • [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver   Pali Rohár
    • [PATCH 2/2] pcie: pcie_advk: move setting of reference clock to the pcie driver   Andre Heider
• [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Andre Heider
  • [PATCH 2/2] arm64: dts: armada-3720-espressobin-emmc: add emmc dts   Andre Heider
    • [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Andre Heider
      • [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Pali Rohár
      • [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Andre Heider
      • [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Pali Rohár
      • [PATCH v2 2/2] arm64: mvebu: a37xx: Add support for EspressoBIN with eMMC   Andre Heider
  • [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Pali Rohár
    • [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Andre Heider
  • [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Pali Rohár
    • [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Andre Heider
      • [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Pali Rohár
      • [PATCH 1/2] arm64: dts: armada-3720-espressobin: sync with downstream   Andre Heider
• [PATCH 1/2] defconfig: espressobin: Include support for Gigadevice SPI   Andre Heider
  • [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes   Andre Heider
    • [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes   Pali Rohár
      • [PATCH 2/2] defconfig: espressobin: Add support for ISSI SPI flashes   Andre Heider
• [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail   Chuanjia Liu
  • Aw: [PATCH] PCI: mediatek: Release the resource when PCIe enable port fail   Frank Wunderlich
• [PATCH] env: Crash in 'env import' when using checksum and a specific size   Pedro Aguilar
• [PATCH v2 0/3] binman: Make FIT image subentries respect offset, alignment and padding   Alper Nebi Yasak
  • [PATCH v2 1/3] binman: Ignore hash*, signature* nodes in sections   Alper Nebi Yasak
    • [PATCH v2 1/3] binman: Ignore hash*, signature* nodes in sections   Simon Glass
  • [PATCH v2 2/3] binman: Respect pad-before property of section subentries   Alper Nebi Yasak
    • [PATCH v2 2/3] binman: Respect pad-before property of section subentries   Simon Glass
  • [PATCH v2 3/3] binman: Build FIT image subentries with the section etype   Alper Nebi Yasak
    • [PATCH v2 3/3] binman: Build FIT image subentries with the section etype   Simon Glass
• [PATCH] mtd: nand: Fix nand write error with bad block addresses above 32-bit   Michal Simek
• [GIT PULL] TI changes for v2020.10-rc4   Lokesh Vutla
  • [GIT PULL] TI changes for v2020.10-rc4   Tom Rini
• [PATCH] MAINTAINERS: step down as maintainer of UniPhier SoCs   Masahiro Yamada
  • [PATCH] MAINTAINERS: step down as maintainer of UniPhier SoCs   Tom Rini
• [PATCH v1] imx: support i.MX8QM DMSSE20 a1 board   Oliver Graute
  • [PATCH v1] imx: support i.MX8QM DMSSE20 a1 board   Tom Rini
  • [PATCH v1] imx: support i.MX8QM DMSSE20 a1 board   Fabio Estevam
• [PATCH v2 1/2] net: add a generic udp protocol   Philippe Reynes
• [PATCH v2 2/2] sandbox: enable support of generic udp protocol   Philippe Reynes
• [PATCH v2 1/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
  • [PATCH v2 1/4] mmc: pic32: Refresh PIC32 MMC driver   Daniel Schwierzeck
• [PATCH v2 2/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH v2 3/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
• [PATCH v2 4/4] mmc: pic32: Refresh PIC32 MMC driver   John Robertson
  • [PATCH v2 4/4] mmc: pic32: Refresh PIC32 MMC driver   Daniel Schwierzeck
• from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Mauro Condarelli
  • from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Daniel Schwierzeck
    • from https://gitlab.denx.de/u-boot/custodians/u-boot-mips:f3d8c7f8d3c02ff1de172aff7e6392a9ddd1f5b2 to master:   Mauro Condarelli