[PATCH] mips: dts: Fix PIC32MZDA GPIO register definitions and dtc warnings

[John Robertson]

Currently GPIO operations (e.g. gpio status -a) don't work at all.

Signed-off-by: John Robertson <john.robertson at simiatec.com>
---

 arch/mips/dts/pic32mzda.dtsi | 58 +++++++++++++++++++++---------------
 1 file changed, 34 insertions(+), 24 deletions(-)

diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi
index 4c8b7a9a0b..71864d3fff 100644
--- a/arch/mips/dts/pic32mzda.dtsi
+++ b/arch/mips/dts/pic32mzda.dtsi
@@ -26,8 +26,13 @@
 	};
 
 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu at 0 {
			compatible = "mips,mips14kc"; 
+			device-type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -40,6 +45,7 @@
 	uart1: serial at 1f822000 {
 		compatible = "microchip,pic32mzda-uart";
 		reg = <0x1f822000 0x50>;
+		interrupt-parent = <&evic>;
 		interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 		clocks = <&clock PB2CLK>;
@@ -48,6 +54,7 @@
 	uart2: serial at 1f822200 {
 		compatible = "microchip,pic32mzda-uart";
 		reg = <0x1f822200 0x50>;
+		interrupt-parent = <&evic>;
 		interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock PB2CLK>;
 		status = "disabled";
@@ -56,6 +63,7 @@
 	uart6: serial at 1f822a00 {
 		compatible = "microchip,pic32mzda-uart";
 		reg = <0x1f822a00 0x50>;
+		interrupt-parent = <&evic>;
 		interrupts = <188 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock PB2CLK>;
 		status = "disabled";
@@ -69,6 +77,8 @@
 	};
 
 	pinctrl: pinctrl at 1f801400 {
+		#address-cells = <1>;
+		#size-cells = <1>;
 		compatible = "microchip,pic32mzda-pinctrl";
 		reg = <0x1f801400 0x100>, /* in  */
 		      <0x1f801500 0x200>, /* out */
@@ -76,75 +86,72 @@
 		reg-names = "ppsin","ppsout","port";
 		status = "disabled";
 
-		ranges = <0 0x1f860000 0xa00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		gpioA: gpio0 at 0 {
+		gpioA: gpio0 at 1f860000 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x000 0x48>;
+			reg = <0x1f860000 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioB: gpio1 at 100 {
+		gpioB: gpio1 at 1f860100 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x100 0x48>;
+			reg = <0x1f860100 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioC: gpio2 at 200 {
+		gpioC: gpio2 at 1f860200 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x200 0x48>;
+			reg = <0x1f860200 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioD: gpio3 at 300 {
+		gpioD: gpio3 at 1f860300 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x300 0x48>;
+			reg = <0x1f860300 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioE: gpio4 at 400 {
+		gpioE: gpio4 at 1f860400 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x400 0x48>;
+			reg = <0x1f860400 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioF: gpio5 at 500 {
+		gpioF: gpio5 at 1f860500 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x500 0x48>;
+			reg = <0x1f860500 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioG: gpio6 at 600 {
+		gpioG: gpio6 at 1f860600 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x600 0x48>;
+			reg = <0x1f860600 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioH: gpio7 at 700 {
+		gpioH: gpio7 at 1f860700 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x700 0x48>;
+			reg = <0x1f860700 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioJ: gpio8 at 800 {
+		gpioJ: gpio9 at 1f860800 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x800 0x48>;
+			reg = <0x1f860800 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpioK: gpio9 at 900 {
+		gpioK: gpio10 at 1f860900 {
 			compatible = "microchip,pic32mzda-gpio";
-			reg = <0x900 0x48>;
+			reg = <0x1f860900 0xe0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
@@ -153,6 +160,7 @@
 	sdhci: sdhci at 1f8ec000 {
 		compatible = "microchip,pic32mzda-sdhci";
 		reg = <0x1f8ec000 0x100>;
+		interrupt-parent = <&evic>;
 		interrupts = <191 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock REF4CLK>, <&clock PB5CLK>;
 		clock-names = "base_clk", "sys_clk";
@@ -164,6 +172,7 @@
 	ethernet: ethernet at 1f882000 {
 		compatible = "microchip,pic32mzda-eth";
 		reg = <0x1f882000 0x1000>;
+		interrupt-parent = <&evic>;
 		interrupts = <153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock PB5CLK>;
 		status = "disabled";
@@ -176,6 +185,7 @@
 		reg = <0x1f8e3000 0x1000>,
 		      <0x1f884000 0x1000>;
 		reg-names = "mc", "control";
+		interrupt-parent = <&evic>;
 		interrupts = <132 IRQ_TYPE_EDGE_RISING>,
 			     <133 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&clock PB5CLK>;
-- 
2.28.0