[PATCH v1 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()

[Stefan Roese]

On MIPS platforms, mapping of the base address is needed. This patch
switches from dev_get_addr() to dev_remap_addr() to get the mapped base
address of the xHCI controller.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Marek Vasut <marex at denx.de>
---

 drivers/usb/host/xhci-dwc3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 27f84102db..045de2ffde 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -122,7 +122,7 @@ static int xhci_dwc3_probe(struct udevice *dev)
 	u32 reg;
 	int ret;
 
-	hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
+	hccr = (struct xhci_hccr *)((uintptr_t)dev_remap_addr(dev));
 	hcor = (struct xhci_hcor *)((uintptr_t)hccr +
 			HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
 
-- 
2.28.0