[PATCH 5/5] IPQ40xx: Add USB nodes

Robert Marko robert.marko at sartura.hr
Mon Aug 17 12:36:06 CEST 2020


There is a driver to support built in USB controller now, so lets add the USB nodes to DTSI.

Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
 arch/arm/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
index 67122de9c0..e82f1253a1 100644
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/dts/qcom-ipq4019.dtsi
@@ -89,5 +89,23 @@
 			gpio-bank-name="soc";
 			#gpio-cells = <2>;
 		};
+
+		usb3: xhci at 8a00000 {
+			compatible = "qcom,dwc3-ipq";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x8a00000 0xcd00>;
+			rst-ctrl = <0x181E038 0x4>;
+			status = "disabled";
+		};
+
+		usb2: xhci at 6000000 {
+			compatible = "qcom,dwc3-ipq";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000000 0xcd00>;
+			rst-ctrl = <0x181E01C 0x4>;
+			status = "disabled";
+		};
 	};
 };
-- 
2.26.2



More information about the U-Boot mailing list