[PATCH v2 4/5] board: ns3: kconfig: extend board kconfig with specific commands

[Rayagonda Kokatanur]

From: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>

Extend Kconfig for the board with board-specific commands selection.

Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov at broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
 board/broadcom/bcmns3/Kconfig | 7 +++++++
 cmd/Makefile                  | 2 ++
 2 files changed, 9 insertions(+)

diff --git a/board/broadcom/bcmns3/Kconfig b/board/broadcom/bcmns3/Kconfig
index 8ce21f980d..cb73f98eae 100644
--- a/board/broadcom/bcmns3/Kconfig
+++ b/board/broadcom/bcmns3/Kconfig
@@ -12,4 +12,11 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "bcm_ns3"
 
+config CMD_BCM_EXT_UTILS
+	bool "Enable Broadcom-specific U-Boot commands"
+	default y
+	help
+	  Enable Broadcom specific U-Boot commands such as error log setup
+	  command or any other commands specific to NS3 platform.
+
 endif
diff --git a/cmd/Makefile b/cmd/Makefile
index 3a9c9747c9..c7a08ed109 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -197,6 +197,8 @@ obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
 # core command
 obj-y += nvedit.o
 
+obj-$(CONFIG_CMD_BCM_EXT_UTILS) += broadcom/
+
 obj-$(CONFIG_TI_COMMON_CMD_OPTIONS) += ti/
 
 filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";")
-- 
2.17.1