[GIT PULL v2] TI changes for v2020.10-rc3
Lokesh Vutla
lokeshvutla at ti.com
Wed Aug 12 04:32:45 CEST 2020
Hi Tom,
Please find the pull request for v2020.10-rc3 containing TI specific
changes. This should have been sent for rc2 but delayed due to some
comments in the last minute. Please look at the PR description for the
details on the PR. Also tag message is updated with details.
Changes since v1:
- Dropped an invalid commit
- Updated Tag message
Travis-CI build: https://travis-ci.org/github/lokeshvutla/u-boot/builds/716955604
The following changes since commit c045207f96f7f7ae8c7f1341111a6010e636176b:
Prepare v2020.10-rc2 (2020-08-10 16:10:09 -0400)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-ti.git tags/ti-v2020.10-rc3
for you to fetch changes up to db6451ec0e8483f76f3364293d48e86249c52322:
arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port (2020-08-11 20:34:46 +0530)
----------------------------------------------------------------
- Added support for J7200 evm
- DM_ETH and DM_USB migrations for omap3
- USB DFU and mass storage support for AM65x evm
- RTI watchdog support for K3 devices
- Fix an issue with L3 cache on K3 devices
----------------------------------------------------------------
Andrew F. Davis (1):
arm: mach-k3: Clean non-coherent lines out of L3 cache
Dave Gerlach (1):
arm: dts: k3-j7200: Add R5 specific dts support
Derald D. Woods (1):
ARM: omap3: evm: Complete DM_ETH and DM_USB migrations
Faiz Abbas (14):
mmc: am654_sdhci: Use MMC_MODES_END value instead of hardcoded value
spl: usb: Create an API spl_usb_load()
spl: usb: Only init usb once
armv7R: K3: am654: Use full malloc in SPL both pre and post reloc
arm: mach-k3: sysfw-loader: Add support to load SYSFW from USB
arm: mach-k3: am6_init: Gate mmc related configurations with the appropriate config
arm: mach-k3: am6_init: Do USB fixups to facilitate host and device boot modes
arm: mach-k3: am6_init: Add support for USB boot mode
arm: dts: k3-am654-r5-base-board: Add USB0 nodes
arm: dts: k3-am654-base-board: Add support for USB0 in SPL
configs: am65x_evm: Add support for DFU related configs
configs: am65x_evm_a53: Enable USB Mass storage and DFU boot modes
configs: Add defconfig for USB DFU bootmode
configs: Add new config for supporting USB mass storage boot
Jan Kiszka (2):
watchdog: Add support for K3 RTI watchdog
arm: dts: k3: Add RTI watchdogs
Jean-Jacques Hiblot (1):
arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled
Kishon Vijay Abraham I (1):
soc: soc_ti_k3: Add device identification for J7200 SoC
Lokesh Vutla (15):
board: ti: board_detect: Add stub functions for EEPROM detection apis
board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined
arm: mach-k3: Move mmr_unlock to a common location
arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
arm: mach-k3: j721e: Add detection for j721e
arm: mach-k3: j721e: Fix unlocking control module registers
arm: mach-k3: j7200: Add support for SOC detection
arm: mach-k3: j7200: Add support for storing extended boot info from ROM
arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
board: ti: j7200: Introduce support for j7200 build targets
board: ti: j7200: Add board detection support for j7200
ram: k3-j721e: Relax version checks for memory controller
arm: dts: k3-j7200: Add dts support
configs: j7200_evm_r5: Add initial support
configs: j7200_evm_a72: Add Initial support
Suman Anna (4):
arm: dts: k3-am65: Fix interconnect node names
arm: dts: k3-j721e: Fix interconnect node names
board: ti: am65x: Update fdt fixup logic for interconnect nodes
board: ti: j721e: Update fdt fixup logic for interconnect nodes
Vignesh Raghavendra (6):
arm: dts: k3-j7200: Add USB related DT entries
board: ti: j721e: Add support for HyperFlash detection
ARM: dts: k3-j7200: Add wkup gpio node
ARM: dts: k3-j7200: Add HyperBus and HyperFlash nodes
ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support
arm: dts: k3-j7200-common-proc-board: Enable CPSW2G port
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/k3-am65-mcu.dtsi | 9 +
arch/arm/dts/k3-am65.dtsi | 6 +-
arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 27 +
arch/arm/dts/k3-am654-r5-base-board.dts | 35 +
.../arm/dts/k3-j7200-common-proc-board-u-boot.dtsi | 133 ++
arch/arm/dts/k3-j7200-common-proc-board.dts | 195 ++
arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi | 2195 ++++++++++++++++++++
arch/arm/dts/k3-j7200-main.dtsi | 343 +++
arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 272 +++
arch/arm/dts/k3-j7200-r5-common-proc-board.dts | 217 ++
arch/arm/dts/k3-j7200-som-p0.dtsi | 62 +
arch/arm/dts/k3-j7200.dtsi | 177 ++
arch/arm/dts/k3-j721e-main.dtsi | 18 +
arch/arm/dts/k3-j721e.dtsi | 4 +-
arch/arm/dts/omap3-evm-37xx-u-boot.dtsi | 10 +
arch/arm/dts/omap3-evm-u-boot.dtsi | 10 +
arch/arm/mach-k3/Makefile | 1 +
arch/arm/mach-k3/am6_init.c | 80 +-
arch/arm/mach-k3/cache.S | 24 +
arch/arm/mach-k3/common.c | 38 +
arch/arm/mach-k3/common.h | 6 +
arch/arm/mach-k3/config.mk | 8 +-
arch/arm/mach-k3/include/mach/am6_hardware.h | 2 +
arch/arm/mach-k3/include/mach/am6_spl.h | 3 +-
arch/arm/mach-k3/include/mach/hardware.h | 8 +
arch/arm/mach-k3/include/mach/j721e_hardware.h | 3 +
arch/arm/mach-k3/include/mach/sys_proto.h | 3 +
arch/arm/mach-k3/include/mach/sysfw-loader.h | 4 +-
arch/arm/mach-k3/j721e_init.c | 30 +-
arch/arm/mach-k3/sysfw-loader.c | 67 +-
arch/arm/mach-omap2/omap3/Kconfig | 3 +
board/ti/am65x/MAINTAINERS | 2 +
board/ti/am65x/evm.c | 10 +-
board/ti/common/board_detect.h | 13 +
board/ti/evm/evm.c | 82 +-
board/ti/j721e/Kconfig | 53 +
board/ti/j721e/MAINTAINERS | 2 +
board/ti/j721e/evm.c | 56 +-
common/spl/spl_usb.c | 31 +-
configs/am65x_evm_a53_defconfig | 10 +
configs/am65x_evm_r5_usbdfu_defconfig | 120 ++
configs/am65x_evm_r5_usbmsc_defconfig | 119 ++
configs/j7200_evm_a72_defconfig | 173 ++
configs/j7200_evm_r5_defconfig | 130 ++
configs/omap3_evm_defconfig | 14 +-
drivers/mmc/am654_sdhci.c | 2 +-
drivers/ram/k3-j721e/lpddr4.c | 16 +-
drivers/soc/soc_ti_k3.c | 4 +
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rti_wdt.c | 123 ++
include/configs/am65x_evm.h | 6 +-
include/configs/j721e_evm.h | 4 +-
include/spl.h | 14 +
55 files changed, 4821 insertions(+), 168 deletions(-)
create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts
create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
create mode 100644 arch/arm/dts/k3-j7200.dtsi
create mode 100644 arch/arm/mach-k3/cache.S
create mode 100644 configs/am65x_evm_r5_usbdfu_defconfig
create mode 100644 configs/am65x_evm_r5_usbmsc_defconfig
create mode 100644 configs/j7200_evm_a72_defconfig
create mode 100644 configs/j7200_evm_r5_defconfig
create mode 100644 drivers/watchdog/rti_wdt.c
--
2.23.0
More information about the U-Boot
mailing list