[PATCH v4 1/8] usb: xhci: xhci-dwc3.c: Use dev_remap_addr() instead of dev_get_addr()
Stefan Roese
sr at denx.de
Mon Aug 24 13:04:36 CEST 2020
On MIPS platforms, mapping of the base address is needed. This patch
switches from dev_get_addr() to dev_remap_addr() to get the mapped base
address of the xHCI controller.
Signed-off-by: Stefan Roese <sr at denx.de>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Marek Vasut <marex at denx.de>
---
(no changes since v3)
Changes in v3:
- Add Reviewed-by tag from Bin
drivers/usb/host/xhci-dwc3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index 27f84102db..045de2ffde 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -122,7 +122,7 @@ static int xhci_dwc3_probe(struct udevice *dev)
u32 reg;
int ret;
- hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
+ hccr = (struct xhci_hccr *)((uintptr_t)dev_remap_addr(dev));
hcor = (struct xhci_hcor *)((uintptr_t)hccr +
HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
--
2.28.0
More information about the U-Boot
mailing list