[PATCH v2] mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.

[Peng Fan]

> Subject: [PATCH v2] mmc: fsl_esdhc_imx: check the clock stable status after
> config the clock rate.
> 
> From: Haibo Chen <haibo.chen at nxp.com>
> 
> Currently, after config the clock rate, delay 10ms, this is quite a rough method.
> Check the clock stable status in the present status register is enough.
> 
> Tested-by: Ji Luo <ji.luo at nxp.com>
> Signed-off-by: Haibo Chen <haibo.chen at nxp.com>
> ---
>  drivers/mmc/fsl_esdhc_imx.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
> index 788677984b..8f7ac5b7a3 100644
> --- a/drivers/mmc/fsl_esdhc_imx.c
> +++ b/drivers/mmc/fsl_esdhc_imx.c
> @@ -36,6 +36,7 @@
>  #include <dt-structs.h>
>  #include <mapmem.h>
>  #include <dm/ofnode.h>
> +#include <linux/iopoll.h>
> 
>  #if !CONFIG_IS_ENABLED(BLK)
>  #include "mmc_private.h"
> @@ -631,6 +632,8 @@ static void set_sysctl(struct fsl_esdhc_priv *priv,
> struct mmc *mmc, uint clock)  {
>  	struct fsl_esdhc *regs = priv->esdhc_regs;
>  	int div = 1;
> +	u32 tmp;
> +	int ret;
>  #ifdef ARCH_MXC
>  #ifdef CONFIG_MX53
>  	/* For i.MX53 eSDHCv3, SYSCTL.SDCLKFS may not be set to 0. */ @@
> -664,7 +667,9 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct
> mmc *mmc, uint clock)
> 
>  	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_CLOCK_MASK, clk);
> 
> -	udelay(10000);
> +	ret = readl_poll_timeout(&regs->prsstat, tmp, tmp & PRSSTAT_SDSTB,

To avoid breaking others, not i.MX, please add access io.

Thanks,
Peng.

> 100);
> +	if (ret)
> +		pr_warn("fsl_esdhc_imx: Internal clock never stabilised.\n");
> 
>  #ifdef CONFIG_FSL_USDHC
>  	esdhc_setbits32(&regs->vendorspec, VENDORSPEC_PEREN |
> VENDORSPEC_CKEN);
> --
> 2.17.1