[PATCH v2 08/21] clk: at91: move clock code to compat.c
Claudiu Beznea
claudiu.beznea at microchip.com
Wed Aug 5 17:11:52 CEST 2020
Move clock code to compat.c to allow switching to CCF
without mixing CCF code with non CCF code. This prepares the
field for next commits.
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
drivers/clk/at91/Makefile | 13 +-
drivers/clk/at91/clk-generated.c | 178 -------
drivers/clk/at91/clk-h32mx.c | 56 --
drivers/clk/at91/clk-main.c | 54 --
drivers/clk/at91/clk-master.c | 33 --
drivers/clk/at91/clk-peripheral.c | 113 ----
drivers/clk/at91/clk-plla.c | 54 --
drivers/clk/at91/clk-plladiv.c | 85 ---
drivers/clk/at91/clk-slow.c | 36 --
drivers/clk/at91/clk-system.c | 111 ----
drivers/clk/at91/clk-usb.c | 147 ------
drivers/clk/at91/clk-utmi.c | 142 -----
drivers/clk/at91/compat.c | 1023 +++++++++++++++++++++++++++++++++++++
drivers/clk/at91/pmc.c | 116 +----
drivers/clk/at91/pmc.h | 13 +-
drivers/clk/at91/sckc.c | 19 -
16 files changed, 1030 insertions(+), 1163 deletions(-)
delete mode 100644 drivers/clk/at91/clk-generated.c
delete mode 100644 drivers/clk/at91/clk-h32mx.c
delete mode 100644 drivers/clk/at91/clk-main.c
delete mode 100644 drivers/clk/at91/clk-master.c
delete mode 100644 drivers/clk/at91/clk-peripheral.c
delete mode 100644 drivers/clk/at91/clk-plla.c
delete mode 100644 drivers/clk/at91/clk-plladiv.c
delete mode 100644 drivers/clk/at91/clk-slow.c
delete mode 100644 drivers/clk/at91/clk-system.c
delete mode 100644 drivers/clk/at91/clk-usb.c
delete mode 100644 drivers/clk/at91/clk-utmi.c
create mode 100644 drivers/clk/at91/compat.c
delete mode 100644 drivers/clk/at91/sckc.c
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 8c197ff949a8..e2413af40360 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -2,11 +2,8 @@
# Makefile for at91 specific clk
#
-obj-y += pmc.o sckc.o
-obj-y += clk-slow.o clk-main.o clk-plla.o clk-plladiv.o clk-master.o
-obj-y += clk-system.o clk-peripheral.o
-
-obj-$(CONFIG_AT91_UTMI) += clk-utmi.o
-obj-$(CONFIG_AT91_USB_CLK) += clk-usb.o
-obj-$(CONFIG_AT91_H32MX) += clk-h32mx.o
-obj-$(CONFIG_AT91_GENERIC_CLK) += clk-generated.o
+ifdef CONFIG_CLK_CCF
+obj-y += pmc.o
+else
+obj-y += compat.o
+endif
diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
deleted file mode 100644
index c0610940c3be..000000000000
--- a/drivers/clk/at91/clk-generated.c
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <log.h>
-#include <malloc.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define GENERATED_SOURCE_MAX 6
-#define GENERATED_MAX_DIV 255
-
-/**
- * generated_clk_bind() - for the generated clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-static int generated_clk_bind(struct udevice *dev)
-{
- return at91_clk_sub_device_bind(dev, "generic-clk");
-}
-
-static const struct udevice_id generated_clk_match[] = {
- { .compatible = "atmel,sama5d2-clk-generated" },
- {}
-};
-
-U_BOOT_DRIVER(generated_clk) = {
- .name = "generated-clk",
- .id = UCLASS_MISC,
- .of_match = generated_clk_match,
- .bind = generated_clk_bind,
-};
-
-/*-------------------------------------------------------------*/
-
-struct generic_clk_priv {
- u32 num_parents;
-};
-
-static ulong generic_clk_get_rate(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct clk parent;
- ulong clk_rate;
- u32 tmp, gckdiv;
- u8 clock_source, parent_index;
- int ret;
-
- writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
- tmp = readl(&pmc->pcr);
- clock_source = (tmp >> AT91_PMC_PCR_GCKCSS_OFFSET) &
- AT91_PMC_PCR_GCKCSS_MASK;
- gckdiv = (tmp >> AT91_PMC_PCR_GCKDIV_OFFSET) & AT91_PMC_PCR_GCKDIV_MASK;
-
- parent_index = clock_source - 1;
- ret = clk_get_by_index(dev_get_parent(clk->dev), parent_index, &parent);
- if (ret)
- return 0;
-
- clk_rate = clk_get_rate(&parent) / (gckdiv + 1);
-
- clk_free(&parent);
-
- return clk_rate;
-}
-
-static ulong generic_clk_set_rate(struct clk *clk, ulong rate)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct generic_clk_priv *priv = dev_get_priv(clk->dev);
- struct clk parent, best_parent;
- ulong tmp_rate, best_rate = rate, parent_rate;
- int tmp_diff, best_diff = -1;
- u32 div, best_div = 0;
- u8 best_parent_index, best_clock_source = 0;
- u8 i;
- u32 tmp;
- int ret;
-
- for (i = 0; i < priv->num_parents; i++) {
- ret = clk_get_by_index(dev_get_parent(clk->dev), i, &parent);
- if (ret)
- return ret;
-
- parent_rate = clk_get_rate(&parent);
- if (IS_ERR_VALUE(parent_rate))
- return parent_rate;
-
- for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
- tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
- tmp_diff = abs(rate - tmp_rate);
-
- if (best_diff < 0 || best_diff > tmp_diff) {
- best_rate = tmp_rate;
- best_diff = tmp_diff;
-
- best_div = div - 1;
- best_parent = parent;
- best_parent_index = i;
- best_clock_source = best_parent_index + 1;
- }
-
- if (!best_diff || tmp_rate < rate)
- break;
- }
-
- if (!best_diff)
- break;
- }
-
- debug("GCK: best parent: %s, best_rate = %ld, best_div = %d\n",
- best_parent.dev->name, best_rate, best_div);
-
- ret = clk_enable(&best_parent);
- if (ret)
- return ret;
-
- writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
- tmp = readl(&pmc->pcr);
- tmp &= ~(AT91_PMC_PCR_GCKDIV | AT91_PMC_PCR_GCKCSS);
- tmp |= AT91_PMC_PCR_GCKCSS_(best_clock_source) |
- AT91_PMC_PCR_CMD_WRITE |
- AT91_PMC_PCR_GCKDIV_(best_div) |
- AT91_PMC_PCR_GCKEN;
- writel(tmp, &pmc->pcr);
-
- while (!(readl(&pmc->sr) & AT91_PMC_GCKRDY))
- ;
-
- return 0;
-}
-
-static struct clk_ops generic_clk_ops = {
- .of_xlate = at91_clk_of_xlate,
- .get_rate = generic_clk_get_rate,
- .set_rate = generic_clk_set_rate,
-};
-
-static int generic_clk_ofdata_to_platdata(struct udevice *dev)
-{
- struct generic_clk_priv *priv = dev_get_priv(dev);
- u32 cells[GENERATED_SOURCE_MAX];
- u32 num_parents;
-
- num_parents = fdtdec_get_int_array_count(gd->fdt_blob,
- dev_of_offset(dev_get_parent(dev)), "clocks", cells,
- GENERATED_SOURCE_MAX);
-
- if (!num_parents)
- return -1;
-
- priv->num_parents = num_parents;
-
- return 0;
-}
-
-U_BOOT_DRIVER(generic_clk) = {
- .name = "generic-clk",
- .id = UCLASS_CLK,
- .probe = at91_clk_probe,
- .ofdata_to_platdata = generic_clk_ofdata_to_platdata,
- .priv_auto_alloc_size = sizeof(struct generic_clk_priv),
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &generic_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-h32mx.c b/drivers/clk/at91/clk-h32mx.c
deleted file mode 100644
index 86bb71f6128b..000000000000
--- a/drivers/clk/at91/clk-h32mx.c
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <dm/device_compat.h>
-#include <dm/util.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define H32MX_MAX_FREQ 90000000
-
-static ulong sama5d4_h32mx_clk_get_rate(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- ulong rate = gd->arch.mck_rate_hz;
-
- if (readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV)
- rate /= 2;
-
- if (rate > H32MX_MAX_FREQ)
- dev_dbg(clk->dev, "H32MX clock is too fast\n");
-
- return rate;
-}
-
-static struct clk_ops sama5d4_h32mx_clk_ops = {
- .get_rate = sama5d4_h32mx_clk_get_rate,
-};
-
-static int sama5d4_h32mx_clk_probe(struct udevice *dev)
-{
- return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id sama5d4_h32mx_clk_match[] = {
- { .compatible = "atmel,sama5d4-clk-h32mx" },
- {}
-};
-
-U_BOOT_DRIVER(sama5d4_h32mx_clk) = {
- .name = "sama5d4-h32mx-clk",
- .id = UCLASS_CLK,
- .of_match = sama5d4_h32mx_clk_match,
- .probe = sama5d4_h32mx_clk_probe,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &sama5d4_h32mx_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
deleted file mode 100644
index b31a1cb68286..000000000000
--- a/drivers/clk/at91/clk-main.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int main_osc_clk_enable(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
-
- if (readl(&pmc->sr) & AT91_PMC_MOSCSELS)
- return 0;
-
- return -EINVAL;
-}
-
-static ulong main_osc_clk_get_rate(struct clk *clk)
-{
- return gd->arch.main_clk_rate_hz;
-}
-
-static struct clk_ops main_osc_clk_ops = {
- .enable = main_osc_clk_enable,
- .get_rate = main_osc_clk_get_rate,
-};
-
-static int main_osc_clk_probe(struct udevice *dev)
-{
- return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id main_osc_clk_match[] = {
- { .compatible = "atmel,at91sam9x5-clk-main" },
- {}
-};
-
-U_BOOT_DRIVER(at91sam9x5_main_osc_clk) = {
- .name = "at91sam9x5-main-osc-clk",
- .id = UCLASS_CLK,
- .of_match = main_osc_clk_match,
- .probe = main_osc_clk_probe,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &main_osc_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
deleted file mode 100644
index e078fab7b415..000000000000
--- a/drivers/clk/at91/clk-master.c
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static ulong at91_master_clk_get_rate(struct clk *clk)
-{
- return gd->arch.mck_rate_hz;
-}
-
-static struct clk_ops at91_master_clk_ops = {
- .get_rate = at91_master_clk_get_rate,
-};
-
-static const struct udevice_id at91_master_clk_match[] = {
- { .compatible = "atmel,at91rm9200-clk-master" },
- { .compatible = "atmel,at91sam9x5-clk-master" },
- {}
-};
-
-U_BOOT_DRIVER(atmel_at91rm9200_clk_master) = {
- .name = "atmel_at91rm9200_clk_master",
- .id = UCLASS_CLK,
- .of_match = at91_master_clk_match,
- .ops = &at91_master_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
deleted file mode 100644
index cd9d5e77c027..000000000000
--- a/drivers/clk/at91/clk-peripheral.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <malloc.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-#define PERIPHERAL_ID_MIN 2
-#define PERIPHERAL_ID_MAX 31
-#define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX))
-
-enum periph_clk_type {
- CLK_PERIPH_AT91RM9200 = 0,
- CLK_PERIPH_AT91SAM9X5,
-};
-/**
- * sam9x5_periph_clk_bind() - for the periph clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-static int sam9x5_periph_clk_bind(struct udevice *dev)
-{
- return at91_clk_sub_device_bind(dev, "periph-clk");
-}
-
-static const struct udevice_id sam9x5_periph_clk_match[] = {
- {
- .compatible = "atmel,at91rm9200-clk-peripheral",
- .data = CLK_PERIPH_AT91RM9200,
- },
- {
- .compatible = "atmel,at91sam9x5-clk-peripheral",
- .data = CLK_PERIPH_AT91SAM9X5,
- },
- {}
-};
-
-U_BOOT_DRIVER(atmel_at91rm9200_clk_peripheral) = {
- .name = "atmel_at91rm9200_clk_peripheral",
- .id = UCLASS_MISC,
- .of_match = sam9x5_periph_clk_match,
- .bind = sam9x5_periph_clk_bind,
-};
-
-/*---------------------------------------------------------*/
-
-static int periph_clk_enable(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- enum periph_clk_type clk_type;
- void *addr;
-
- if (clk->id < PERIPHERAL_ID_MIN)
- return -1;
-
- clk_type = dev_get_driver_data(dev_get_parent(clk->dev));
- if (clk_type == CLK_PERIPH_AT91RM9200) {
- addr = &pmc->pcer;
- if (clk->id > PERIPHERAL_ID_MAX)
- addr = &pmc->pcer1;
-
- setbits_le32(addr, PERIPHERAL_MASK(clk->id));
- } else {
- writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
- setbits_le32(&pmc->pcr,
- AT91_PMC_PCR_CMD_WRITE | AT91_PMC_PCR_EN);
- }
-
- return 0;
-}
-
-static ulong periph_get_rate(struct clk *clk)
-{
- struct udevice *dev;
- struct clk clk_dev;
- ulong clk_rate;
- int ret;
-
- dev = dev_get_parent(clk->dev);
-
- ret = clk_get_by_index(dev, 0, &clk_dev);
- if (ret)
- return ret;
-
- clk_rate = clk_get_rate(&clk_dev);
-
- clk_free(&clk_dev);
-
- return clk_rate;
-}
-
-static struct clk_ops periph_clk_ops = {
- .of_xlate = at91_clk_of_xlate,
- .enable = periph_clk_enable,
- .get_rate = periph_get_rate,
-};
-
-U_BOOT_DRIVER(clk_periph) = {
- .name = "periph-clk",
- .id = UCLASS_CLK,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .probe = at91_clk_probe,
- .ops = &periph_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-plla.c b/drivers/clk/at91/clk-plla.c
deleted file mode 100644
index 79d725819fca..000000000000
--- a/drivers/clk/at91/clk-plla.c
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int plla_clk_enable(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
-
- if (readl(&pmc->sr) & AT91_PMC_LOCKA)
- return 0;
-
- return -EINVAL;
-}
-
-static ulong plla_clk_get_rate(struct clk *clk)
-{
- return gd->arch.plla_rate_hz;
-}
-
-static struct clk_ops plla_clk_ops = {
- .enable = plla_clk_enable,
- .get_rate = plla_clk_get_rate,
-};
-
-static int plla_clk_probe(struct udevice *dev)
-{
- return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id plla_clk_match[] = {
- { .compatible = "atmel,sama5d3-clk-pll" },
- {}
-};
-
-U_BOOT_DRIVER(at91_plla_clk) = {
- .name = "at91-plla-clk",
- .id = UCLASS_CLK,
- .of_match = plla_clk_match,
- .probe = plla_clk_probe,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &plla_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-plladiv.c b/drivers/clk/at91/clk-plladiv.c
deleted file mode 100644
index ca6158ef6ab2..000000000000
--- a/drivers/clk/at91/clk-plladiv.c
+++ /dev/null
@@ -1,85 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Microhip / Atmel Corporation
- * Wenyou.Yang <wenyou.yang at microchip.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm/device.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-static int at91_plladiv_clk_enable(struct clk *clk)
-{
- return 0;
-}
-
-static ulong at91_plladiv_clk_get_rate(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct clk source;
- ulong clk_rate;
- int ret;
-
- ret = clk_get_by_index(clk->dev, 0, &source);
- if (ret)
- return -EINVAL;
-
- clk_rate = clk_get_rate(&source);
- if (readl(&pmc->mckr) & AT91_PMC_MCKR_PLLADIV_2)
- clk_rate /= 2;
-
- return clk_rate;
-}
-
-static ulong at91_plladiv_clk_set_rate(struct clk *clk, ulong rate)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct clk source;
- ulong parent_rate;
- int ret;
-
- ret = clk_get_by_index(clk->dev, 0, &source);
- if (ret)
- return -EINVAL;
-
- parent_rate = clk_get_rate(&source);
- if ((parent_rate != rate) && ((parent_rate) / 2 != rate))
- return -EINVAL;
-
- if (parent_rate != rate) {
- writel((readl(&pmc->mckr) | AT91_PMC_MCKR_PLLADIV_2),
- &pmc->mckr);
- }
-
- return 0;
-}
-
-static struct clk_ops at91_plladiv_clk_ops = {
- .enable = at91_plladiv_clk_enable,
- .get_rate = at91_plladiv_clk_get_rate,
- .set_rate = at91_plladiv_clk_set_rate,
-};
-
-static int at91_plladiv_clk_probe(struct udevice *dev)
-{
- return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id at91_plladiv_clk_match[] = {
- { .compatible = "atmel,at91sam9x5-clk-plldiv" },
- {}
-};
-
-U_BOOT_DRIVER(at91_plladiv_clk) = {
- .name = "at91-plladiv-clk",
- .id = UCLASS_CLK,
- .of_match = at91_plladiv_clk_match,
- .probe = at91_plladiv_clk_probe,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &at91_plladiv_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-slow.c b/drivers/clk/at91/clk-slow.c
deleted file mode 100644
index 1f8665768b00..000000000000
--- a/drivers/clk/at91/clk-slow.c
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-
-static int at91_slow_clk_enable(struct clk *clk)
-{
- return 0;
-}
-
-static ulong at91_slow_clk_get_rate(struct clk *clk)
-{
- return CONFIG_SYS_AT91_SLOW_CLOCK;
-}
-
-static struct clk_ops at91_slow_clk_ops = {
- .enable = at91_slow_clk_enable,
- .get_rate = at91_slow_clk_get_rate,
-};
-
-static const struct udevice_id at91_slow_clk_match[] = {
- { .compatible = "atmel,at91sam9x5-clk-slow" },
- {}
-};
-
-U_BOOT_DRIVER(at91_slow_clk) = {
- .name = "at91-slow-clk",
- .id = UCLASS_CLK,
- .of_match = at91_slow_clk_match,
- .ops = &at91_slow_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
deleted file mode 100644
index 76b1958670d6..000000000000
--- a/drivers/clk/at91/clk-system.c
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-#define SYSTEM_MAX_ID 31
-
-/**
- * at91_system_clk_bind() - for the system clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-static int at91_system_clk_bind(struct udevice *dev)
-{
- return at91_clk_sub_device_bind(dev, "system-clk");
-}
-
-static const struct udevice_id at91_system_clk_match[] = {
- { .compatible = "atmel,at91rm9200-clk-system" },
- {}
-};
-
-U_BOOT_DRIVER(at91_system_clk) = {
- .name = "at91-system-clk",
- .id = UCLASS_MISC,
- .of_match = at91_system_clk_match,
- .bind = at91_system_clk_bind,
-};
-
-/*----------------------------------------------------------*/
-
-static inline int is_pck(int id)
-{
- return (id >= 8) && (id <= 15);
-}
-
-static ulong system_clk_get_rate(struct clk *clk)
-{
- struct clk clk_dev;
- int ret;
-
- ret = clk_get_by_index(clk->dev, 0, &clk_dev);
- if (ret)
- return -EINVAL;
-
- return clk_get_rate(&clk_dev);
-}
-
-static ulong system_clk_set_rate(struct clk *clk, ulong rate)
-{
- struct clk clk_dev;
- int ret;
-
- ret = clk_get_by_index(clk->dev, 0, &clk_dev);
- if (ret)
- return -EINVAL;
-
- return clk_set_rate(&clk_dev, rate);
-}
-
-static int system_clk_enable(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- u32 mask;
-
- if (clk->id > SYSTEM_MAX_ID)
- return -EINVAL;
-
- mask = BIT(clk->id);
-
- writel(mask, &pmc->scer);
-
- /**
- * For the programmable clocks the Ready status in the PMC
- * status register should be checked after enabling.
- * For other clocks this is unnecessary.
- */
- if (!is_pck(clk->id))
- return 0;
-
- while (!(readl(&pmc->sr) & mask))
- ;
-
- return 0;
-}
-
-static struct clk_ops system_clk_ops = {
- .of_xlate = at91_clk_of_xlate,
- .get_rate = system_clk_get_rate,
- .set_rate = system_clk_set_rate,
- .enable = system_clk_enable,
-};
-
-U_BOOT_DRIVER(system_clk) = {
- .name = "system-clk",
- .id = UCLASS_CLK,
- .probe = at91_clk_probe,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &system_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
deleted file mode 100644
index af9d72436933..000000000000
--- a/drivers/clk/at91/clk-usb.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Microhip / Atmel Corporation
- * Wenyou.Yang <wenyou.yang at microchip.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <log.h>
-#include <dm/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define AT91_USB_CLK_SOURCE_MAX 2
-#define AT91_USB_CLK_MAX_DIV 15
-
-struct at91_usb_clk_priv {
- u32 num_clksource;
-};
-
-static ulong at91_usb_clk_get_rate(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct clk source;
- u32 tmp, usbdiv;
- u8 source_index;
- int ret;
-
- tmp = readl(&pmc->pcr);
- source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) &
- AT91_PMC_USB_USBS_MASK;
- usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK;
-
- ret = clk_get_by_index(clk->dev, source_index, &source);
- if (ret)
- return 0;
-
- return clk_get_rate(&source) / (usbdiv + 1);
-}
-
-static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev);
- struct clk source, best_source;
- ulong tmp_rate, best_rate = rate, source_rate;
- int tmp_diff, best_diff = -1;
- u32 div, best_div = 0;
- u8 best_source_index = 0;
- u8 i;
- u32 tmp;
- int ret;
-
- for (i = 0; i < priv->num_clksource; i++) {
- ret = clk_get_by_index(clk->dev, i, &source);
- if (ret)
- return ret;
-
- source_rate = clk_get_rate(&source);
- if (IS_ERR_VALUE(source_rate))
- return source_rate;
-
- for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) {
- tmp_rate = DIV_ROUND_CLOSEST(source_rate, div);
- tmp_diff = abs(rate - tmp_rate);
-
- if (best_diff < 0 || best_diff > tmp_diff) {
- best_rate = tmp_rate;
- best_diff = tmp_diff;
-
- best_div = div - 1;
- best_source = source;
- best_source_index = i;
- }
-
- if (!best_diff || tmp_rate < rate)
- break;
- }
-
- if (!best_diff)
- break;
- }
-
- debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n",
- best_source.dev->name, best_rate, best_div);
-
- ret = clk_enable(&best_source);
- if (ret)
- return ret;
-
- tmp = AT91_PMC_USB_USBS_(best_source_index) |
- AT91_PMC_USB_DIV_(best_div);
- writel(tmp, &pmc->usb);
-
- return 0;
-}
-
-static struct clk_ops at91_usb_clk_ops = {
- .get_rate = at91_usb_clk_get_rate,
- .set_rate = at91_usb_clk_set_rate,
-};
-
-static int at91_usb_clk_ofdata_to_platdata(struct udevice *dev)
-{
- struct at91_usb_clk_priv *priv = dev_get_priv(dev);
- u32 cells[AT91_USB_CLK_SOURCE_MAX];
- u32 num_clksource;
-
- num_clksource = fdtdec_get_int_array_count(gd->fdt_blob,
- dev_of_offset(dev),
- "clocks", cells,
- AT91_USB_CLK_SOURCE_MAX);
-
- if (!num_clksource)
- return -1;
-
- priv->num_clksource = num_clksource;
-
- return 0;
-}
-
-static int at91_usb_clk_probe(struct udevice *dev)
-{
- return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id at91_usb_clk_match[] = {
- { .compatible = "atmel,at91sam9x5-clk-usb" },
- {}
-};
-
-U_BOOT_DRIVER(at91_usb_clk) = {
- .name = "at91-usb-clk",
- .id = UCLASS_CLK,
- .of_match = at91_usb_clk_match,
- .probe = at91_usb_clk_probe,
- .ofdata_to_platdata = at91_usb_clk_ofdata_to_platdata,
- .priv_auto_alloc_size = sizeof(struct at91_usb_clk_priv),
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &at91_usb_clk_ops,
-};
diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
deleted file mode 100644
index 18af0bfeaad1..000000000000
--- a/drivers/clk/at91/clk-utmi.c
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <syscon.h>
-#include <linux/io.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_sfr.h>
-#include "pmc.h"
-
-/*
- * The purpose of this clock is to generate a 480 MHz signal. A different
- * rate can't be configured.
- */
-#define UTMI_RATE 480000000
-
-static int utmi_clk_enable(struct clk *clk)
-{
- struct pmc_platdata *plat = dev_get_platdata(clk->dev);
- struct at91_pmc *pmc = plat->reg_base;
- struct clk clk_dev;
- ulong clk_rate;
- u32 utmi_ref_clk_freq;
- u32 tmp;
- int err;
- int timeout = 2000000;
-
- if (readl(&pmc->sr) & AT91_PMC_LOCKU)
- return 0;
-
- /*
- * If mainck rate is different from 12 MHz, we have to configure the
- * FREQ field of the SFR_UTMICKTRIM register to generate properly
- * the utmi clock.
- */
- err = clk_get_by_index(clk->dev, 0, &clk_dev);
- if (err)
- return -EINVAL;
-
- clk_rate = clk_get_rate(&clk_dev);
- switch (clk_rate) {
- case 12000000:
- utmi_ref_clk_freq = 0;
- break;
- case 16000000:
- utmi_ref_clk_freq = 1;
- break;
- case 24000000:
- utmi_ref_clk_freq = 2;
- break;
- /*
- * Not supported on SAMA5D2 but it's not an issue since MAINCK
- * maximum value is 24 MHz.
- */
- case 48000000:
- utmi_ref_clk_freq = 3;
- break;
- default:
- printf("UTMICK: unsupported mainck rate\n");
- return -EINVAL;
- }
-
- if (plat->regmap_sfr) {
- err = regmap_read(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, &tmp);
- if (err)
- return -EINVAL;
-
- tmp &= ~AT91_UTMICKTRIM_FREQ;
- tmp |= utmi_ref_clk_freq;
- err = regmap_write(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, tmp);
- if (err)
- return -EINVAL;
- } else if (utmi_ref_clk_freq) {
- printf("UTMICK: sfr node required\n");
- return -EINVAL;
- }
-
- tmp = readl(&pmc->uckr);
- tmp |= AT91_PMC_UPLLEN |
- AT91_PMC_UPLLCOUNT |
- AT91_PMC_BIASEN;
- writel(tmp, &pmc->uckr);
-
- while ((--timeout) && !(readl(&pmc->sr) & AT91_PMC_LOCKU))
- ;
- if (!timeout) {
- printf("UTMICK: timeout waiting for UPLL lock\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static ulong utmi_clk_get_rate(struct clk *clk)
-{
- /* UTMI clk rate is fixed. */
- return UTMI_RATE;
-}
-
-static struct clk_ops utmi_clk_ops = {
- .enable = utmi_clk_enable,
- .get_rate = utmi_clk_get_rate,
-};
-
-static int utmi_clk_ofdata_to_platdata(struct udevice *dev)
-{
- struct pmc_platdata *plat = dev_get_platdata(dev);
- struct udevice *syscon;
-
- uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
- "regmap-sfr", &syscon);
-
- if (syscon)
- plat->regmap_sfr = syscon_get_regmap(syscon);
-
- return 0;
-}
-
-static int utmi_clk_probe(struct udevice *dev)
-{
- return at91_pmc_core_probe(dev);
-}
-
-static const struct udevice_id utmi_clk_match[] = {
- { .compatible = "atmel,at91sam9x5-clk-utmi" },
- {}
-};
-
-U_BOOT_DRIVER(at91sam9x5_utmi_clk) = {
- .name = "at91sam9x5-utmi-clk",
- .id = UCLASS_CLK,
- .of_match = utmi_clk_match,
- .probe = utmi_clk_probe,
- .ofdata_to_platdata = utmi_clk_ofdata_to_platdata,
- .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
- .ops = &utmi_clk_ops,
-};
diff --git a/drivers/clk/at91/compat.c b/drivers/clk/at91/compat.c
new file mode 100644
index 000000000000..60b607a47192
--- /dev/null
+++ b/drivers/clk/at91/compat.c
@@ -0,0 +1,1023 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Compatible code for non CCF AT91 platforms.
+ *
+ * Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea at microchip.com>
+ */
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <dm/lists.h>
+#include <dm/util.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_sfr.h>
+#include <regmap.h>
+#include <syscon.h>
+
+#include "pmc.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct pmc_platdata {
+ struct at91_pmc *reg_base;
+ struct regmap *regmap_sfr;
+};
+
+static const struct udevice_id at91_pmc_match[] = {
+ { .compatible = "atmel,at91rm9200-pmc" },
+ { .compatible = "atmel,at91sam9260-pmc" },
+ { .compatible = "atmel,at91sam9g45-pmc" },
+ { .compatible = "atmel,at91sam9n12-pmc" },
+ { .compatible = "atmel,at91sam9x5-pmc" },
+ { .compatible = "atmel,sama5d3-pmc" },
+ { .compatible = "atmel,sama5d2-pmc" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_pmc) = {
+ .name = "at91-pmc",
+ .id = UCLASS_SIMPLE_BUS,
+ .of_match = at91_pmc_match,
+};
+
+static int at91_pmc_core_probe(struct udevice *dev)
+{
+ struct pmc_platdata *plat = dev_get_platdata(dev);
+
+ dev = dev_get_parent(dev);
+
+ plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev);
+
+ return 0;
+}
+
+/**
+ * at91_clk_sub_device_bind() - for the at91 clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name)
+{
+ const void *fdt = gd->fdt_blob;
+ int offset = dev_of_offset(dev);
+ bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
+ const char *name;
+ int ret;
+
+ for (offset = fdt_first_subnode(fdt, offset);
+ offset > 0;
+ offset = fdt_next_subnode(fdt, offset)) {
+ if (pre_reloc_only &&
+ !ofnode_pre_reloc(offset_to_ofnode(offset)))
+ continue;
+ /*
+ * If this node has "compatible" property, this is not
+ * a clock sub-node, but a normal device. skip.
+ */
+ fdt_get_property(fdt, offset, "compatible", &ret);
+ if (ret >= 0)
+ continue;
+
+ if (ret != -FDT_ERR_NOTFOUND)
+ return ret;
+
+ name = fdt_get_name(fdt, offset, NULL);
+ if (!name)
+ return -EINVAL;
+ ret = device_bind_driver_to_node(dev, drv_name, name,
+ offset_to_ofnode(offset), NULL);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
+{
+ int periph;
+
+ if (args->args_count) {
+ debug("Invalid args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
+
+ periph = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(clk->dev), "reg",
+ -1);
+ if (periph < 0)
+ return -EINVAL;
+
+ clk->id = periph;
+
+ return 0;
+}
+
+int at91_clk_probe(struct udevice *dev)
+{
+ struct udevice *dev_periph_container, *dev_pmc;
+ struct pmc_platdata *plat = dev_get_platdata(dev);
+
+ dev_periph_container = dev_get_parent(dev);
+ dev_pmc = dev_get_parent(dev_periph_container);
+
+ plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev_pmc);
+
+ return 0;
+}
+
+/* SCKC specific code. */
+static const struct udevice_id at91_sckc_match[] = {
+ { .compatible = "atmel,at91sam9x5-sckc" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_sckc) = {
+ .name = "at91-sckc",
+ .id = UCLASS_SIMPLE_BUS,
+ .of_match = at91_sckc_match,
+};
+
+/* Slow clock specific code. */
+static int at91_slow_clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static ulong at91_slow_clk_get_rate(struct clk *clk)
+{
+ return CONFIG_SYS_AT91_SLOW_CLOCK;
+}
+
+static struct clk_ops at91_slow_clk_ops = {
+ .enable = at91_slow_clk_enable,
+ .get_rate = at91_slow_clk_get_rate,
+};
+
+static const struct udevice_id at91_slow_clk_match[] = {
+ { .compatible = "atmel,at91sam9x5-clk-slow" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_slow_clk) = {
+ .name = "at91-slow-clk",
+ .id = UCLASS_CLK,
+ .of_match = at91_slow_clk_match,
+ .ops = &at91_slow_clk_ops,
+};
+
+/* Master clock specific code. */
+static ulong at91_master_clk_get_rate(struct clk *clk)
+{
+ return gd->arch.mck_rate_hz;
+}
+
+static struct clk_ops at91_master_clk_ops = {
+ .get_rate = at91_master_clk_get_rate,
+};
+
+static const struct udevice_id at91_master_clk_match[] = {
+ { .compatible = "atmel,at91rm9200-clk-master" },
+ { .compatible = "atmel,at91sam9x5-clk-master" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_master_clk) = {
+ .name = "at91-master-clk",
+ .id = UCLASS_CLK,
+ .of_match = at91_master_clk_match,
+ .ops = &at91_master_clk_ops,
+};
+
+/* Main osc clock specific code. */
+static int main_osc_clk_enable(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+
+ if (readl(&pmc->sr) & AT91_PMC_MOSCSELS)
+ return 0;
+
+ return -EINVAL;
+}
+
+static ulong main_osc_clk_get_rate(struct clk *clk)
+{
+ return gd->arch.main_clk_rate_hz;
+}
+
+static struct clk_ops main_osc_clk_ops = {
+ .enable = main_osc_clk_enable,
+ .get_rate = main_osc_clk_get_rate,
+};
+
+static int main_osc_clk_probe(struct udevice *dev)
+{
+ return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id main_osc_clk_match[] = {
+ { .compatible = "atmel,at91sam9x5-clk-main" },
+ {}
+};
+
+U_BOOT_DRIVER(at91sam9x5_main_osc_clk) = {
+ .name = "at91sam9x5-main-osc-clk",
+ .id = UCLASS_CLK,
+ .of_match = main_osc_clk_match,
+ .probe = main_osc_clk_probe,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &main_osc_clk_ops,
+};
+
+/* PLLA clock specific code. */
+static int plla_clk_enable(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+
+ if (readl(&pmc->sr) & AT91_PMC_LOCKA)
+ return 0;
+
+ return -EINVAL;
+}
+
+static ulong plla_clk_get_rate(struct clk *clk)
+{
+ return gd->arch.plla_rate_hz;
+}
+
+static struct clk_ops plla_clk_ops = {
+ .enable = plla_clk_enable,
+ .get_rate = plla_clk_get_rate,
+};
+
+static int plla_clk_probe(struct udevice *dev)
+{
+ return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id plla_clk_match[] = {
+ { .compatible = "atmel,sama5d3-clk-pll" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_plla_clk) = {
+ .name = "at91-plla-clk",
+ .id = UCLASS_CLK,
+ .of_match = plla_clk_match,
+ .probe = plla_clk_probe,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &plla_clk_ops,
+};
+
+/* PLLA DIV clock specific code. */
+static int at91_plladiv_clk_enable(struct clk *clk)
+{
+ return 0;
+}
+
+static ulong at91_plladiv_clk_get_rate(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct clk source;
+ ulong clk_rate;
+ int ret;
+
+ ret = clk_get_by_index(clk->dev, 0, &source);
+ if (ret)
+ return -EINVAL;
+
+ clk_rate = clk_get_rate(&source);
+ if (readl(&pmc->mckr) & AT91_PMC_MCKR_PLLADIV_2)
+ clk_rate /= 2;
+
+ return clk_rate;
+}
+
+static ulong at91_plladiv_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct clk source;
+ ulong parent_rate;
+ int ret;
+
+ ret = clk_get_by_index(clk->dev, 0, &source);
+ if (ret)
+ return -EINVAL;
+
+ parent_rate = clk_get_rate(&source);
+ if ((parent_rate != rate) && ((parent_rate) / 2 != rate))
+ return -EINVAL;
+
+ if (parent_rate != rate) {
+ writel((readl(&pmc->mckr) | AT91_PMC_MCKR_PLLADIV_2),
+ &pmc->mckr);
+ }
+
+ return 0;
+}
+
+static struct clk_ops at91_plladiv_clk_ops = {
+ .enable = at91_plladiv_clk_enable,
+ .get_rate = at91_plladiv_clk_get_rate,
+ .set_rate = at91_plladiv_clk_set_rate,
+};
+
+static int at91_plladiv_clk_probe(struct udevice *dev)
+{
+ return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id at91_plladiv_clk_match[] = {
+ { .compatible = "atmel,at91sam9x5-clk-plldiv" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_plladiv_clk) = {
+ .name = "at91-plladiv-clk",
+ .id = UCLASS_CLK,
+ .of_match = at91_plladiv_clk_match,
+ .probe = at91_plladiv_clk_probe,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &at91_plladiv_clk_ops,
+};
+
+/* System clock specific code. */
+#define SYSTEM_MAX_ID 31
+
+/**
+ * at91_system_clk_bind() - for the system clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+static int at91_system_clk_bind(struct udevice *dev)
+{
+ return at91_clk_sub_device_bind(dev, "system-clk");
+}
+
+static const struct udevice_id at91_system_clk_match[] = {
+ { .compatible = "atmel,at91rm9200-clk-system" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_system_clk) = {
+ .name = "at91-system-clk",
+ .id = UCLASS_MISC,
+ .of_match = at91_system_clk_match,
+ .bind = at91_system_clk_bind,
+};
+
+static inline int is_pck(int id)
+{
+ return (id >= 8) && (id <= 15);
+}
+
+static ulong system_clk_get_rate(struct clk *clk)
+{
+ struct clk clk_dev;
+ int ret;
+
+ ret = clk_get_by_index(clk->dev, 0, &clk_dev);
+ if (ret)
+ return -EINVAL;
+
+ return clk_get_rate(&clk_dev);
+}
+
+static ulong system_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct clk clk_dev;
+ int ret;
+
+ ret = clk_get_by_index(clk->dev, 0, &clk_dev);
+ if (ret)
+ return -EINVAL;
+
+ return clk_set_rate(&clk_dev, rate);
+}
+
+static int system_clk_enable(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ u32 mask;
+
+ if (clk->id > SYSTEM_MAX_ID)
+ return -EINVAL;
+
+ mask = BIT(clk->id);
+
+ writel(mask, &pmc->scer);
+
+ /**
+ * For the programmable clocks the Ready status in the PMC
+ * status register should be checked after enabling.
+ * For other clocks this is unnecessary.
+ */
+ if (!is_pck(clk->id))
+ return 0;
+
+ while (!(readl(&pmc->sr) & mask))
+ ;
+
+ return 0;
+}
+
+static struct clk_ops system_clk_ops = {
+ .of_xlate = at91_clk_of_xlate,
+ .get_rate = system_clk_get_rate,
+ .set_rate = system_clk_set_rate,
+ .enable = system_clk_enable,
+};
+
+U_BOOT_DRIVER(system_clk) = {
+ .name = "system-clk",
+ .id = UCLASS_CLK,
+ .probe = at91_clk_probe,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &system_clk_ops,
+};
+
+/* Peripheral clock specific code. */
+#define PERIPHERAL_ID_MIN 2
+#define PERIPHERAL_ID_MAX 31
+#define PERIPHERAL_MASK(id) (1 << ((id) & PERIPHERAL_ID_MAX))
+
+enum periph_clk_type {
+ CLK_PERIPH_AT91RM9200 = 0,
+ CLK_PERIPH_AT91SAM9X5,
+};
+
+/**
+ * sam9x5_periph_clk_bind() - for the periph clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+static int sam9x5_periph_clk_bind(struct udevice *dev)
+{
+ return at91_clk_sub_device_bind(dev, "periph-clk");
+}
+
+static const struct udevice_id sam9x5_periph_clk_match[] = {
+ {
+ .compatible = "atmel,at91rm9200-clk-peripheral",
+ .data = CLK_PERIPH_AT91RM9200,
+ },
+ {
+ .compatible = "atmel,at91sam9x5-clk-peripheral",
+ .data = CLK_PERIPH_AT91SAM9X5,
+ },
+ {}
+};
+
+U_BOOT_DRIVER(sam9x5_periph_clk) = {
+ .name = "sam9x5-periph-clk",
+ .id = UCLASS_MISC,
+ .of_match = sam9x5_periph_clk_match,
+ .bind = sam9x5_periph_clk_bind,
+};
+
+static int periph_clk_enable(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ enum periph_clk_type clk_type;
+ void *addr;
+
+ if (clk->id < PERIPHERAL_ID_MIN)
+ return -1;
+
+ clk_type = dev_get_driver_data(dev_get_parent(clk->dev));
+ if (clk_type == CLK_PERIPH_AT91RM9200) {
+ addr = &pmc->pcer;
+ if (clk->id > PERIPHERAL_ID_MAX)
+ addr = &pmc->pcer1;
+
+ setbits_le32(addr, PERIPHERAL_MASK(clk->id));
+ } else {
+ writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
+ setbits_le32(&pmc->pcr,
+ AT91_PMC_PCR_CMD_WRITE | AT91_PMC_PCR_EN);
+ }
+
+ return 0;
+}
+
+static ulong periph_get_rate(struct clk *clk)
+{
+ struct udevice *dev;
+ struct clk clk_dev;
+ ulong clk_rate;
+ int ret;
+
+ dev = dev_get_parent(clk->dev);
+
+ ret = clk_get_by_index(dev, 0, &clk_dev);
+ if (ret)
+ return ret;
+
+ clk_rate = clk_get_rate(&clk_dev);
+
+ clk_free(&clk_dev);
+
+ return clk_rate;
+}
+
+static struct clk_ops periph_clk_ops = {
+ .of_xlate = at91_clk_of_xlate,
+ .enable = periph_clk_enable,
+ .get_rate = periph_get_rate,
+};
+
+U_BOOT_DRIVER(clk_periph) = {
+ .name = "periph-clk",
+ .id = UCLASS_CLK,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .probe = at91_clk_probe,
+ .ops = &periph_clk_ops,
+};
+
+/* UTMI clock specific code. */
+#ifdef CONFIG_AT91_UTMI
+
+/*
+ * The purpose of this clock is to generate a 480 MHz signal. A different
+ * rate can't be configured.
+ */
+#define UTMI_RATE 480000000
+
+static int utmi_clk_enable(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct clk clk_dev;
+ ulong clk_rate;
+ u32 utmi_ref_clk_freq;
+ u32 tmp;
+ int err;
+ int timeout = 2000000;
+
+ if (readl(&pmc->sr) & AT91_PMC_LOCKU)
+ return 0;
+
+ /*
+ * If mainck rate is different from 12 MHz, we have to configure the
+ * FREQ field of the SFR_UTMICKTRIM register to generate properly
+ * the utmi clock.
+ */
+ err = clk_get_by_index(clk->dev, 0, &clk_dev);
+ if (err)
+ return -EINVAL;
+
+ clk_rate = clk_get_rate(&clk_dev);
+ switch (clk_rate) {
+ case 12000000:
+ utmi_ref_clk_freq = 0;
+ break;
+ case 16000000:
+ utmi_ref_clk_freq = 1;
+ break;
+ case 24000000:
+ utmi_ref_clk_freq = 2;
+ break;
+ /*
+ * Not supported on SAMA5D2 but it's not an issue since MAINCK
+ * maximum value is 24 MHz.
+ */
+ case 48000000:
+ utmi_ref_clk_freq = 3;
+ break;
+ default:
+ printf("UTMICK: unsupported mainck rate\n");
+ return -EINVAL;
+ }
+
+ if (plat->regmap_sfr) {
+ err = regmap_read(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, &tmp);
+ if (err)
+ return -EINVAL;
+
+ tmp &= ~AT91_UTMICKTRIM_FREQ;
+ tmp |= utmi_ref_clk_freq;
+ err = regmap_write(plat->regmap_sfr, AT91_SFR_UTMICKTRIM, tmp);
+ if (err)
+ return -EINVAL;
+ } else if (utmi_ref_clk_freq) {
+ printf("UTMICK: sfr node required\n");
+ return -EINVAL;
+ }
+
+ tmp = readl(&pmc->uckr);
+ tmp |= AT91_PMC_UPLLEN |
+ AT91_PMC_UPLLCOUNT |
+ AT91_PMC_BIASEN;
+ writel(tmp, &pmc->uckr);
+
+ while ((--timeout) && !(readl(&pmc->sr) & AT91_PMC_LOCKU))
+ ;
+ if (!timeout) {
+ printf("UTMICK: timeout waiting for UPLL lock\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static ulong utmi_clk_get_rate(struct clk *clk)
+{
+ /* UTMI clk rate is fixed. */
+ return UTMI_RATE;
+}
+
+static struct clk_ops utmi_clk_ops = {
+ .enable = utmi_clk_enable,
+ .get_rate = utmi_clk_get_rate,
+};
+
+static int utmi_clk_ofdata_to_platdata(struct udevice *dev)
+{
+ struct pmc_platdata *plat = dev_get_platdata(dev);
+ struct udevice *syscon;
+
+ uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
+ "regmap-sfr", &syscon);
+
+ if (syscon)
+ plat->regmap_sfr = syscon_get_regmap(syscon);
+
+ return 0;
+}
+
+static int utmi_clk_probe(struct udevice *dev)
+{
+ return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id utmi_clk_match[] = {
+ { .compatible = "atmel,at91sam9x5-clk-utmi" },
+ {}
+};
+
+U_BOOT_DRIVER(at91sam9x5_utmi_clk) = {
+ .name = "at91sam9x5-utmi-clk",
+ .id = UCLASS_CLK,
+ .of_match = utmi_clk_match,
+ .probe = utmi_clk_probe,
+ .ofdata_to_platdata = utmi_clk_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &utmi_clk_ops,
+};
+
+#endif /* CONFIG_AT91_UTMI */
+
+/* H32MX clock specific code. */
+#ifdef CONFIG_AT91_H32MX
+
+#define H32MX_MAX_FREQ 90000000
+
+static ulong sama5d4_h32mx_clk_get_rate(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ ulong rate = gd->arch.mck_rate_hz;
+
+ if (readl(&pmc->mckr) & AT91_PMC_MCKR_H32MXDIV)
+ rate /= 2;
+
+ if (rate > H32MX_MAX_FREQ)
+ dev_dbg(clk->dev, "H32MX clock is too fast\n");
+
+ return rate;
+}
+
+static struct clk_ops sama5d4_h32mx_clk_ops = {
+ .get_rate = sama5d4_h32mx_clk_get_rate,
+};
+
+static int sama5d4_h32mx_clk_probe(struct udevice *dev)
+{
+ return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id sama5d4_h32mx_clk_match[] = {
+ { .compatible = "atmel,sama5d4-clk-h32mx" },
+ {}
+};
+
+U_BOOT_DRIVER(sama5d4_h32mx_clk) = {
+ .name = "sama5d4-h32mx-clk",
+ .id = UCLASS_CLK,
+ .of_match = sama5d4_h32mx_clk_match,
+ .probe = sama5d4_h32mx_clk_probe,
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &sama5d4_h32mx_clk_ops,
+};
+
+#endif /* CONFIG_AT91_H32MX */
+
+/* Generic clock specific code. */
+#ifdef CONFIG_AT91_GENERIC_CLK
+
+#define GENERATED_SOURCE_MAX 6
+#define GENERATED_MAX_DIV 255
+
+/**
+ * generated_clk_bind() - for the generated clock driver
+ * Recursively bind its children as clk devices.
+ *
+ * @return: 0 on success, or negative error code on failure
+ */
+static int generated_clk_bind(struct udevice *dev)
+{
+ return at91_clk_sub_device_bind(dev, "generic-clk");
+}
+
+static const struct udevice_id generated_clk_match[] = {
+ { .compatible = "atmel,sama5d2-clk-generated" },
+ {}
+};
+
+U_BOOT_DRIVER(generated_clk) = {
+ .name = "generated-clk",
+ .id = UCLASS_MISC,
+ .of_match = generated_clk_match,
+ .bind = generated_clk_bind,
+};
+
+struct generic_clk_priv {
+ u32 num_parents;
+};
+
+static ulong generic_clk_get_rate(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct clk parent;
+ ulong clk_rate;
+ u32 tmp, gckdiv;
+ u8 clock_source, parent_index;
+ int ret;
+
+ writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
+ tmp = readl(&pmc->pcr);
+ clock_source = (tmp >> AT91_PMC_PCR_GCKCSS_OFFSET) &
+ AT91_PMC_PCR_GCKCSS_MASK;
+ gckdiv = (tmp >> AT91_PMC_PCR_GCKDIV_OFFSET) & AT91_PMC_PCR_GCKDIV_MASK;
+
+ parent_index = clock_source - 1;
+ ret = clk_get_by_index(dev_get_parent(clk->dev), parent_index, &parent);
+ if (ret)
+ return 0;
+
+ clk_rate = clk_get_rate(&parent) / (gckdiv + 1);
+
+ clk_free(&parent);
+
+ return clk_rate;
+}
+
+static ulong generic_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct generic_clk_priv *priv = dev_get_priv(clk->dev);
+ struct clk parent, best_parent;
+ ulong tmp_rate, best_rate = rate, parent_rate;
+ int tmp_diff, best_diff = -1;
+ u32 div, best_div = 0;
+ u8 best_parent_index, best_clock_source = 0;
+ u8 i;
+ u32 tmp;
+ int ret;
+
+ for (i = 0; i < priv->num_parents; i++) {
+ ret = clk_get_by_index(dev_get_parent(clk->dev), i, &parent);
+ if (ret)
+ return ret;
+
+ parent_rate = clk_get_rate(&parent);
+ if (IS_ERR_VALUE(parent_rate))
+ return parent_rate;
+
+ for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
+ tmp_rate = DIV_ROUND_CLOSEST(parent_rate, div);
+ tmp_diff = abs(rate - tmp_rate);
+
+ if (best_diff < 0 || best_diff > tmp_diff) {
+ best_rate = tmp_rate;
+ best_diff = tmp_diff;
+
+ best_div = div - 1;
+ best_parent = parent;
+ best_parent_index = i;
+ best_clock_source = best_parent_index + 1;
+ }
+
+ if (!best_diff || tmp_rate < rate)
+ break;
+ }
+
+ if (!best_diff)
+ break;
+ }
+
+ debug("GCK: best parent: %s, best_rate = %ld, best_div = %d\n",
+ best_parent.dev->name, best_rate, best_div);
+
+ ret = clk_enable(&best_parent);
+ if (ret)
+ return ret;
+
+ writel(clk->id & AT91_PMC_PCR_PID_MASK, &pmc->pcr);
+ tmp = readl(&pmc->pcr);
+ tmp &= ~(AT91_PMC_PCR_GCKDIV | AT91_PMC_PCR_GCKCSS);
+ tmp |= AT91_PMC_PCR_GCKCSS_(best_clock_source) |
+ AT91_PMC_PCR_CMD_WRITE |
+ AT91_PMC_PCR_GCKDIV_(best_div) |
+ AT91_PMC_PCR_GCKEN;
+ writel(tmp, &pmc->pcr);
+
+ while (!(readl(&pmc->sr) & AT91_PMC_GCKRDY))
+ ;
+
+ return 0;
+}
+
+static struct clk_ops generic_clk_ops = {
+ .of_xlate = at91_clk_of_xlate,
+ .get_rate = generic_clk_get_rate,
+ .set_rate = generic_clk_set_rate,
+};
+
+static int generic_clk_ofdata_to_platdata(struct udevice *dev)
+{
+ struct generic_clk_priv *priv = dev_get_priv(dev);
+ u32 cells[GENERATED_SOURCE_MAX];
+ u32 num_parents;
+
+ num_parents = fdtdec_get_int_array_count(gd->fdt_blob,
+ dev_of_offset(dev_get_parent(dev)), "clocks", cells,
+ GENERATED_SOURCE_MAX);
+
+ if (!num_parents)
+ return -1;
+
+ priv->num_parents = num_parents;
+
+ return 0;
+}
+
+U_BOOT_DRIVER(generic_clk) = {
+ .name = "generic-clk",
+ .id = UCLASS_CLK,
+ .probe = at91_clk_probe,
+ .ofdata_to_platdata = generic_clk_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct generic_clk_priv),
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &generic_clk_ops,
+};
+
+#endif /* CONFIG_AT91_GENERIC_CLK */
+
+/* USB clock specific code. */
+#ifdef CONFIG_AT91_USB_CLK
+
+#define AT91_USB_CLK_SOURCE_MAX 2
+#define AT91_USB_CLK_MAX_DIV 15
+
+struct at91_usb_clk_priv {
+ u32 num_clksource;
+};
+
+static ulong at91_usb_clk_get_rate(struct clk *clk)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct clk source;
+ u32 tmp, usbdiv;
+ u8 source_index;
+ int ret;
+
+ tmp = readl(&pmc->pcr);
+ source_index = (tmp >> AT91_PMC_USB_USBS_OFFSET) &
+ AT91_PMC_USB_USBS_MASK;
+ usbdiv = (tmp >> AT91_PMC_USB_DIV_OFFSET) & AT91_PMC_USB_DIV_MASK;
+
+ ret = clk_get_by_index(clk->dev, source_index, &source);
+ if (ret)
+ return 0;
+
+ return clk_get_rate(&source) / (usbdiv + 1);
+}
+
+static ulong at91_usb_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct pmc_platdata *plat = dev_get_platdata(clk->dev);
+ struct at91_pmc *pmc = plat->reg_base;
+ struct at91_usb_clk_priv *priv = dev_get_priv(clk->dev);
+ struct clk source, best_source;
+ ulong tmp_rate, best_rate = rate, source_rate;
+ int tmp_diff, best_diff = -1;
+ u32 div, best_div = 0;
+ u8 best_source_index = 0;
+ u8 i;
+ u32 tmp;
+ int ret;
+
+ for (i = 0; i < priv->num_clksource; i++) {
+ ret = clk_get_by_index(clk->dev, i, &source);
+ if (ret)
+ return ret;
+
+ source_rate = clk_get_rate(&source);
+ if (IS_ERR_VALUE(source_rate))
+ return source_rate;
+
+ for (div = 1; div < AT91_USB_CLK_MAX_DIV + 2; div++) {
+ tmp_rate = DIV_ROUND_CLOSEST(source_rate, div);
+ tmp_diff = abs(rate - tmp_rate);
+
+ if (best_diff < 0 || best_diff > tmp_diff) {
+ best_rate = tmp_rate;
+ best_diff = tmp_diff;
+
+ best_div = div - 1;
+ best_source = source;
+ best_source_index = i;
+ }
+
+ if (!best_diff || tmp_rate < rate)
+ break;
+ }
+
+ if (!best_diff)
+ break;
+ }
+
+ debug("AT91 USB: best sourc: %s, best_rate = %ld, best_div = %d\n",
+ best_source.dev->name, best_rate, best_div);
+
+ ret = clk_enable(&best_source);
+ if (ret)
+ return ret;
+
+ tmp = AT91_PMC_USB_USBS_(best_source_index) |
+ AT91_PMC_USB_DIV_(best_div);
+ writel(tmp, &pmc->usb);
+
+ return 0;
+}
+
+static struct clk_ops at91_usb_clk_ops = {
+ .get_rate = at91_usb_clk_get_rate,
+ .set_rate = at91_usb_clk_set_rate,
+};
+
+static int at91_usb_clk_ofdata_to_platdata(struct udevice *dev)
+{
+ struct at91_usb_clk_priv *priv = dev_get_priv(dev);
+ u32 cells[AT91_USB_CLK_SOURCE_MAX];
+ u32 num_clksource;
+
+ num_clksource = fdtdec_get_int_array_count(gd->fdt_blob,
+ dev_of_offset(dev),
+ "clocks", cells,
+ AT91_USB_CLK_SOURCE_MAX);
+
+ if (!num_clksource)
+ return -1;
+
+ priv->num_clksource = num_clksource;
+
+ return 0;
+}
+
+static int at91_usb_clk_probe(struct udevice *dev)
+{
+ return at91_pmc_core_probe(dev);
+}
+
+static const struct udevice_id at91_usb_clk_match[] = {
+ { .compatible = "atmel,at91sam9x5-clk-usb" },
+ {}
+};
+
+U_BOOT_DRIVER(at91_usb_clk) = {
+ .name = "at91-usb-clk",
+ .id = UCLASS_CLK,
+ .of_match = at91_usb_clk_match,
+ .probe = at91_usb_clk_probe,
+ .ofdata_to_platdata = at91_usb_clk_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct at91_usb_clk_priv),
+ .platdata_auto_alloc_size = sizeof(struct pmc_platdata),
+ .ops = &at91_usb_clk_ops,
+};
+
+#endif /* CONFIG_AT91_USB_CLK */
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 77204a433f91..29c6452497b7 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -4,122 +4,8 @@
* Wenyou.Yang <wenyou.yang at atmel.com>
*/
+#include <asm/io.h>
#include <common.h>
-#include <clk-uclass.h>
-#include <dm.h>
-#include <log.h>
-#include <dm/lists.h>
-#include <dm/util.h>
-#include "pmc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const struct udevice_id at91_pmc_match[] = {
- { .compatible = "atmel,at91rm9200-pmc" },
- { .compatible = "atmel,at91sam9260-pmc" },
- { .compatible = "atmel,at91sam9g45-pmc" },
- { .compatible = "atmel,at91sam9n12-pmc" },
- { .compatible = "atmel,at91sam9x5-pmc" },
- { .compatible = "atmel,sama5d3-pmc" },
- { .compatible = "atmel,sama5d2-pmc" },
- {}
-};
-
-U_BOOT_DRIVER(atmel_at91rm9200_pmc) = {
- .name = "atmel_at91rm9200_pmc",
- .id = UCLASS_SIMPLE_BUS,
- .of_match = at91_pmc_match,
-};
-
-U_BOOT_DRIVER_ALIAS(atmel_at91rm9200_pmc, atmel_at91sam9260_pmc)
-
-/*---------------------------------------------------------*/
-
-int at91_pmc_core_probe(struct udevice *dev)
-{
- struct pmc_platdata *plat = dev_get_platdata(dev);
-
- dev = dev_get_parent(dev);
-
- plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev);
-
- return 0;
-}
-
-/**
- * at91_clk_sub_device_bind() - for the at91 clock driver
- * Recursively bind its children as clk devices.
- *
- * @return: 0 on success, or negative error code on failure
- */
-int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name)
-{
- const void *fdt = gd->fdt_blob;
- int offset = dev_of_offset(dev);
- bool pre_reloc_only = !(gd->flags & GD_FLG_RELOC);
- const char *name;
- int ret;
-
- for (offset = fdt_first_subnode(fdt, offset);
- offset > 0;
- offset = fdt_next_subnode(fdt, offset)) {
- if (pre_reloc_only &&
- !ofnode_pre_reloc(offset_to_ofnode(offset)))
- continue;
- /*
- * If this node has "compatible" property, this is not
- * a clock sub-node, but a normal device. skip.
- */
- fdt_get_property(fdt, offset, "compatible", &ret);
- if (ret >= 0)
- continue;
-
- if (ret != -FDT_ERR_NOTFOUND)
- return ret;
-
- name = fdt_get_name(fdt, offset, NULL);
- if (!name)
- return -EINVAL;
- ret = device_bind_driver_to_node(dev, drv_name, name,
- offset_to_ofnode(offset), NULL);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
-{
- int periph;
-
- if (args->args_count) {
- debug("Invalid args_count: %d\n", args->args_count);
- return -EINVAL;
- }
-
- periph = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(clk->dev), "reg",
- -1);
- if (periph < 0)
- return -EINVAL;
-
- clk->id = periph;
-
- return 0;
-}
-
-int at91_clk_probe(struct udevice *dev)
-{
- struct udevice *dev_periph_container, *dev_pmc;
- struct pmc_platdata *plat = dev_get_platdata(dev);
-
- dev_periph_container = dev_get_parent(dev);
- dev_pmc = dev_get_parent(dev_periph_container);
-
- plat->reg_base = (struct at91_pmc *)devfdt_get_addr_ptr(dev_pmc);
-
- return 0;
-}
/**
* pmc_read() - read content at address base + off into val
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index b1ab0a95c855..33ded02156c8 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -7,7 +7,6 @@
#ifndef __AT91_PMC_H__
#define __AT91_PMC_H__
-#include <regmap.h>
#include <linux/bitops.h>
#include <linux/io.h>
@@ -15,17 +14,6 @@
#define AT91_TO_CLK_ID(_t, _i) (((_t) << 8) | ((_i) & 0xff))
#define AT91_CLK_ID_TO_DID(_i) ((_i) & 0xff)
-struct pmc_platdata {
- struct at91_pmc *reg_base;
- struct regmap *regmap_sfr;
-};
-
-int at91_pmc_core_probe(struct udevice *dev);
-int at91_clk_sub_device_bind(struct udevice *dev, const char *drv_name);
-
-int at91_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args);
-int at91_clk_probe(struct udevice *dev);
-
int at91_clk_mux_val_to_index(const u32 *table, u32 num_parents, u32 val);
int at91_clk_mux_index_to_val(const u32 *table, u32 num_parents, u32 index);
@@ -33,4 +21,5 @@ void pmc_read(void __iomem *base, unsigned int off, unsigned int *val);
void pmc_write(void __iomem *base, unsigned int off, unsigned int val);
void pmc_update_bits(void __iomem *base, unsigned int off, unsigned int mask,
unsigned int bits);
+
#endif
diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c
deleted file mode 100644
index a879b008ffd6..000000000000
--- a/drivers/clk/at91/sckc.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016 Atmel Corporation
- * Wenyou.Yang <wenyou.yang at atmel.com>
- */
-
-#include <common.h>
-#include <dm.h>
-
-static const struct udevice_id at91_sckc_match[] = {
- { .compatible = "atmel,at91sam9x5-sckc" },
- {}
-};
-
-U_BOOT_DRIVER(at91_sckc) = {
- .name = "at91-sckc",
- .id = UCLASS_SIMPLE_BUS,
- .of_match = at91_sckc_match,
-};
--
2.7.4
More information about the U-Boot
mailing list