[PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image

Heinrich Schuchardt xypron.glpk at gmx.de
Fri Aug 28 06:07:10 CEST 2020


On 8/3/20 7:43 AM, AKASHI Takahiro wrote:
> The test can run on sandbox build and it attempts to execute a firmware
> update via a capsule-on-disk, using a raw image capsule,
> CONFIG_EFI_CAPSULE_RAW.
>
> To run this test successfully, you need configure U-Boot specifically;
> See test_capsule_firmware.py for requirements, and hence it won't run
> on Travis CI.
>

git format-patch results in the same filename for patch 16 and 17.

You subject lines are simply too long. How about:

"test/py: test for raw image capsule"

Best regards

Heinrich

> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> ---
>  test/py/tests/test_efi_capsule/conftest.py    |  3 +
>  .../test_efi_capsule/test_capsule_firmware.py | 63 +++++++++++++++++++
>  2 files changed, 66 insertions(+)
>
> diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
> index 4e7c36f04ba5..4544a24d5351 100644
> --- a/test/py/tests/test_efi_capsule/conftest.py
> +++ b/test/py/tests/test_efi_capsule/conftest.py
> @@ -51,6 +51,9 @@ def efi_capsule_data(request, u_boot_config):
>          check_call('cd %s; %s/tools/mkeficapsule --fit uboot_bin_env.itb --version 1 --index 1 Test01' %
>                     (data_dir, u_boot_config.build_dir),
>                     shell=True)
> +        check_call('cd %s; %s/tools/mkeficapsule --raw u-boot.bin.new --version 1 --index 1 Test02' %
> +                   (data_dir, u_boot_config.build_dir),
> +                   shell=True)
>
>          # Create a disk image with EFI system partition
>          check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' %
> diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware.py b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> index 1673a4877778..2b2c7baa7ba6 100644
> --- a/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> @@ -15,6 +15,7 @@ from defs import *
>
>  @pytest.mark.boardspec('sandbox')
>  @pytest.mark.buildconfigspec('efi_capsule_firmware_fit')
> + at pytest.mark.buildconfigspec('efi_capsule_firmware_raw')
>  @pytest.mark.buildconfigspec('efi_capsule_on_disk')
>  @pytest.mark.buildconfigspec('dfu')
>  @pytest.mark.buildconfigspec('dfu_sf')
> @@ -176,3 +177,65 @@ class TestEfiCapsuleFirmwareFit(object):
>                  'sf read 4000000 150000 10',
>                  'md.b 4000000 10'])
>              assert 'u-boot-env:New' in ''.join(output)
> +
> +    def test_efi_capsule_fw3(
> +            self, u_boot_config, u_boot_console, efi_capsule_data):
> +        """
> +        Test Case 3 - Update U-Boot on SPI Flash, raw image format
> +                      0x100000-0x150000: U-Boot binary (but dummy)
> +        """
> +        # "-T" (or "-D") is required to enable spi flash on sandbox
> +        u_boot_console.restart_uboot_with_flags('-T')
> +
> +        disk_img = efi_capsule_data
> +        with u_boot_console.log.section('Test Case 3-a, before reboot'):
> +            output = u_boot_console.run_command_list([
> +                'host bind 0 %s' % disk_img,
> +                'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
> +                'efidebug boot order 1',
> +                'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
> +                'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',
> +                'env save'])
> +
> +            # initialize content
> +            output = u_boot_console.run_command_list([
> +                'sf probe 0:0',
> +                'fatload host 0:1 4000000 %s/u-boot.bin.old' % CAPSULE_DATA_DIR,
> +                'sf write 4000000 100000 10',
> +                'sf read 5000000 100000 10',
> +                'md.b 5000000 10'])
> +            assert 'Old' in ''.join(output)
> +
> +            # place a capsule file
> +            output = u_boot_console.run_command_list([
> +                'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR,
> +                'fatwrite host 0:1 4000000 %s/Test02 $filesize' % CAPSULE_INSTALL_DIR,
> +                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> +            assert 'Test02' in ''.join(output)
> +
> +        # reboot
> +        u_boot_console.restart_uboot_with_flags('-T')
> +
> +        capsule_early = u_boot_config.buildconfig.get(
> +            'config_efi_capsule_on_disk_early')
> +        with u_boot_console.log.section('Test Case 3-b, after reboot'):
> +            if not capsule_early:
> +                output = u_boot_console.run_command_list([
> +                    'host bind 0 %s' % disk_img,
> +                    'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> +                assert 'Test02' in ''.join(output)
> +
> +                # need to run uefi command to initiate capsule handling
> +                output = u_boot_console.run_command(
> +                    'env print -e -all Capsule0000')
> +
> +            output = u_boot_console.run_command_list([
> +                'host bind 0 %s' % disk_img,
> +                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> +            assert 'Test02' not in ''.join(output)
> +
> +            output = u_boot_console.run_command_list([
> +                'sf probe 0:0',
> +                'sf read 4000000 100000 10',
> +                'md.b 4000000 10'])
> +            assert 'u-boot:New' in ''.join(output)
>



More information about the U-Boot mailing list