[PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image

[AKASHI Takahiro]

On Fri, Aug 28, 2020 at 06:07:10AM +0200, Heinrich Schuchardt wrote:
> On 8/3/20 7:43 AM, AKASHI Takahiro wrote:
> > The test can run on sandbox build and it attempts to execute a firmware
> > update via a capsule-on-disk, using a raw image capsule,
> > CONFIG_EFI_CAPSULE_RAW.
> >
> > To run this test successfully, you need configure U-Boot specifically;
> > See test_capsule_firmware.py for requirements, and hence it won't run
> > on Travis CI.
> >
> 
> git format-patch results in the same filename for patch 16 and 17.

Indeed, though the preceding index number will make them distinguishable.

> You subject lines are simply too long. How about:
> 
> "test/py: test for raw image capsule"

Okay, something like that.

-Takahiro Akashi

> Best regards
> 
> Heinrich
> 
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > ---
> >  test/py/tests/test_efi_capsule/conftest.py    |  3 +
> >  .../test_efi_capsule/test_capsule_firmware.py | 63 +++++++++++++++++++
> >  2 files changed, 66 insertions(+)
> >
> > diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
> > index 4e7c36f04ba5..4544a24d5351 100644
> > --- a/test/py/tests/test_efi_capsule/conftest.py
> > +++ b/test/py/tests/test_efi_capsule/conftest.py
> > @@ -51,6 +51,9 @@ def efi_capsule_data(request, u_boot_config):
> >          check_call('cd %s; %s/tools/mkeficapsule --fit uboot_bin_env.itb --version 1 --index 1 Test01' %
> >                     (data_dir, u_boot_config.build_dir),
> >                     shell=True)
> > +        check_call('cd %s; %s/tools/mkeficapsule --raw u-boot.bin.new --version 1 --index 1 Test02' %
> > +                   (data_dir, u_boot_config.build_dir),
> > +                   shell=True)
> >
> >          # Create a disk image with EFI system partition
> >          check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' %
> > diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware.py b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> > index 1673a4877778..2b2c7baa7ba6 100644
> > --- a/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> > +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> > @@ -15,6 +15,7 @@ from defs import *
> >
> >  @pytest.mark.boardspec('sandbox')
> >  @pytest.mark.buildconfigspec('efi_capsule_firmware_fit')
> > + at pytest.mark.buildconfigspec('efi_capsule_firmware_raw')
> >  @pytest.mark.buildconfigspec('efi_capsule_on_disk')
> >  @pytest.mark.buildconfigspec('dfu')
> >  @pytest.mark.buildconfigspec('dfu_sf')
> > @@ -176,3 +177,65 @@ class TestEfiCapsuleFirmwareFit(object):
> >                  'sf read 4000000 150000 10',
> >                  'md.b 4000000 10'])
> >              assert 'u-boot-env:New' in ''.join(output)
> > +
> > +    def test_efi_capsule_fw3(
> > +            self, u_boot_config, u_boot_console, efi_capsule_data):
> > +        """
> > +        Test Case 3 - Update U-Boot on SPI Flash, raw image format
> > +                      0x100000-0x150000: U-Boot binary (but dummy)
> > +        """
> > +        # "-T" (or "-D") is required to enable spi flash on sandbox
> > +        u_boot_console.restart_uboot_with_flags('-T')
> > +
> > +        disk_img = efi_capsule_data
> > +        with u_boot_console.log.section('Test Case 3-a, before reboot'):
> > +            output = u_boot_console.run_command_list([
> > +                'host bind 0 %s' % disk_img,
> > +                'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
> > +                'efidebug boot order 1',
> > +                'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
> > +                'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',
> > +                'env save'])
> > +
> > +            # initialize content
> > +            output = u_boot_console.run_command_list([
> > +                'sf probe 0:0',
> > +                'fatload host 0:1 4000000 %s/u-boot.bin.old' % CAPSULE_DATA_DIR,
> > +                'sf write 4000000 100000 10',
> > +                'sf read 5000000 100000 10',
> > +                'md.b 5000000 10'])
> > +            assert 'Old' in ''.join(output)
> > +
> > +            # place a capsule file
> > +            output = u_boot_console.run_command_list([
> > +                'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR,
> > +                'fatwrite host 0:1 4000000 %s/Test02 $filesize' % CAPSULE_INSTALL_DIR,
> > +                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> > +            assert 'Test02' in ''.join(output)
> > +
> > +        # reboot
> > +        u_boot_console.restart_uboot_with_flags('-T')
> > +
> > +        capsule_early = u_boot_config.buildconfig.get(
> > +            'config_efi_capsule_on_disk_early')
> > +        with u_boot_console.log.section('Test Case 3-b, after reboot'):
> > +            if not capsule_early:
> > +                output = u_boot_console.run_command_list([
> > +                    'host bind 0 %s' % disk_img,
> > +                    'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> > +                assert 'Test02' in ''.join(output)
> > +
> > +                # need to run uefi command to initiate capsule handling
> > +                output = u_boot_console.run_command(
> > +                    'env print -e -all Capsule0000')
> > +
> > +            output = u_boot_console.run_command_list([
> > +                'host bind 0 %s' % disk_img,
> > +                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> > +            assert 'Test02' not in ''.join(output)
> > +
> > +            output = u_boot_console.run_command_list([
> > +                'sf probe 0:0',
> > +                'sf read 4000000 100000 10',
> > +                'md.b 4000000 10'])
> > +            assert 'u-boot:New' in ''.join(output)
> >
>