[PATCH v5 17/17] test/py: add a test for uefi firmware update capsule of raw image

[Heinrich Schuchardt]

On 28.08.20 06:07, Heinrich Schuchardt wrote:
> On 8/3/20 7:43 AM, AKASHI Takahiro wrote:
>> The test can run on sandbox build and it attempts to execute a firmware
>> update via a capsule-on-disk, using a raw image capsule,
>> CONFIG_EFI_CAPSULE_RAW.
>>
>> To run this test successfully, you need configure U-Boot specifically;
>> See test_capsule_firmware.py for requirements, and hence it won't run
>> on Travis CI.
>>
>
> git format-patch results in the same filename for patch 16 and 17.
>
> You subject lines are simply too long. How about:
>
> "test/py: test for raw image capsule"
>
> Best regards
>
> Heinrich
>
>> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
>> ---
>>  test/py/tests/test_efi_capsule/conftest.py    |  3 +
>>  .../test_efi_capsule/test_capsule_firmware.py | 63 +++++++++++++++++++
>>  2 files changed, 66 insertions(+)
>>
>> diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
>> index 4e7c36f04ba5..4544a24d5351 100644
>> --- a/test/py/tests/test_efi_capsule/conftest.py
>> +++ b/test/py/tests/test_efi_capsule/conftest.py
>> @@ -51,6 +51,9 @@ def efi_capsule_data(request, u_boot_config):
>>          check_call('cd %s; %s/tools/mkeficapsule --fit uboot_bin_env.itb --version 1 --index 1 Test01' %
>>                     (data_dir, u_boot_config.build_dir),
>>                     shell=True)
>> +        check_call('cd %s; %s/tools/mkeficapsule --raw u-boot.bin.new --version 1 --index 1 Test02' %
>> +                   (data_dir, u_boot_config.build_dir),
>> +                   shell=True)
>>
>>          # Create a disk image with EFI system partition
>>          check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' %
>> diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware.py b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
>> index 1673a4877778..2b2c7baa7ba6 100644
>> --- a/test/py/tests/test_efi_capsule/test_capsule_firmware.py
>> +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
>> @@ -15,6 +15,7 @@ from defs import *
>>
>>  @pytest.mark.boardspec('sandbox')
>>  @pytest.mark.buildconfigspec('efi_capsule_firmware_fit')
>> + at pytest.mark.buildconfigspec('efi_capsule_firmware_raw')
>>  @pytest.mark.buildconfigspec('efi_capsule_on_disk')
>>  @pytest.mark.buildconfigspec('dfu')
>>  @pytest.mark.buildconfigspec('dfu_sf')
>> @@ -176,3 +177,65 @@ class TestEfiCapsuleFirmwareFit(object):
>>                  'sf read 4000000 150000 10',
>>                  'md.b 4000000 10'])
>>              assert 'u-boot-env:New' in ''.join(output)
>> +
>> +    def test_efi_capsule_fw3(
>> +            self, u_boot_config, u_boot_console, efi_capsule_data):
>> +        """
>> +        Test Case 3 - Update U-Boot on SPI Flash, raw image format
>> +                      0x100000-0x150000: U-Boot binary (but dummy)
>> +        """
>> +        # "-T" (or "-D") is required to enable spi flash on sandbox
>> +        u_boot_console.restart_uboot_with_flags('-T')
>> +
>> +        disk_img = efi_capsule_data
>> +        with u_boot_console.log.section('Test Case 3-a, before reboot'):
>> +            output = u_boot_console.run_command_list([
>> +                'host bind 0 %s' % disk_img,
>> +                'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
>> +                'efidebug boot order 1',
>> +                'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
>> +                'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',

Invalid escape sequence \;

Best regards

Heinrich

>> +                'env save'])
>> +
>> +            # initialize content
>> +            output = u_boot_console.run_command_list([
>> +                'sf probe 0:0',
>> +                'fatload host 0:1 4000000 %s/u-boot.bin.old' % CAPSULE_DATA_DIR,
>> +                'sf write 4000000 100000 10',
>> +                'sf read 5000000 100000 10',
>> +                'md.b 5000000 10'])
>> +            assert 'Old' in ''.join(output)
>> +
>> +            # place a capsule file
>> +            output = u_boot_console.run_command_list([
>> +                'fatload host 0:1 4000000 %s/Test02' % CAPSULE_DATA_DIR,
>> +                'fatwrite host 0:1 4000000 %s/Test02 $filesize' % CAPSULE_INSTALL_DIR,
>> +                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
>> +            assert 'Test02' in ''.join(output)
>> +
>> +        # reboot
>> +        u_boot_console.restart_uboot_with_flags('-T')
>> +
>> +        capsule_early = u_boot_config.buildconfig.get(
>> +            'config_efi_capsule_on_disk_early')
>> +        with u_boot_console.log.section('Test Case 3-b, after reboot'):
>> +            if not capsule_early:
>> +                output = u_boot_console.run_command_list([
>> +                    'host bind 0 %s' % disk_img,
>> +                    'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
>> +                assert 'Test02' in ''.join(output)
>> +
>> +                # need to run uefi command to initiate capsule handling
>> +                output = u_boot_console.run_command(
>> +                    'env print -e -all Capsule0000')
>> +
>> +            output = u_boot_console.run_command_list([
>> +                'host bind 0 %s' % disk_img,
>> +                'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
>> +            assert 'Test02' not in ''.join(output)
>> +
>> +            output = u_boot_console.run_command_list([
>> +                'sf probe 0:0',
>> +                'sf read 4000000 100000 10',
>> +                'md.b 4000000 10'])
>> +            assert 'u-boot:New' in ''.join(output)
>>
>