[PATCH v5 00/17] efi_loader: add capsule update support
Heinrich Schuchardt
xypron.glpk at gmx.de
Mon Aug 17 12:42:03 CEST 2020
On 03.08.20 07:43, AKASHI Takahiro wrote:
> Summary
> =======
> 'UpdateCapsule' is one of runtime services defined in UEFI specification
> and its aim is to allow a caller (OS) to pass information to the firmware,
> i.e. U-Boot. This is mostly used to update firmware binary on devices by
> instructions from OS.
>
> While 'UpdateCapsule' is a runtime services function, it is, at least
> initially, supported only before exiting boot services alike other runtime
> functions, [Get/]SetVariable. This is because modifying storage which may
> be shared with OS must be carefully designed and there is no general
> assumption that we can do it.
>
> Therefore, we practically support only "capsule on disk"; any capsule can
> be handed over to UEFI subsystem as a file on a specific file system.
>
> In this patch series, all the related definitions and structures are given
> as UEFI specification describes, and basic framework for capsule support
> is provided. Currently supported is
> * firmware update (Firmware Management Protocol or simply FMP)
>
> Most of functionality of firmware update is provided by FMP driver and
> it can be, by nature, system/platform-specific. So you can and should
> implement your own FMP driver(s) based on your system requirements.
> Under the current implementation, we provide two basic but generic
> drivers with two formats:
> * FIT image format (as used in TFTP update and dfu)
> * raw image format
>
> It's totally up to users which one, or both, should be used on users'
> system depending on user requirements.
>
> Quick usage
> ===========
> 1. You can create a capsule file with the following host command:
>
> $ mkeficapsule [--fit <fit image> | --raw <raw image>] <output file>
>
> 2. Put the file under:
>
> /EFI/UpdateCapsule of UEFI system partition
>
> 3. Specify firmware storage to be updated in "dfu_alt_info" variable
> (Please follow README.dfu for details.)
>
> ==> env set dfu_alt_info '...'
>
> 4. After setting up UEFI's OsIndications variable, reboot U-Boot:
>
> OsIndications <= EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED
>
> Patch structure
> ===============
> Patch#1-#4,#12: preparatory patches
> Patch#5-#11,#13: main part of implementation
> Patch#14-#15: utilities
> Patch#16-#17: pytests
>
> [1] https://git.linaro.org/people/takahiro.akashi/u-boot.git efi/capsule
>
> Prerequisite patches
> ====================
> dfu change by Heinrich[2]
>
> [2] https://lists.denx.de/pipermail/u-boot/2020-July/420950.html
>
> Test
> ====
> * passed all the pytests which are included in this patch series
> on sandbox build locally.
>
> Please note that the capsule pytest itself won't be run in the CI
> partly because some specific configuration for sandbox build is
> required and partly because there is a problem with virt-make-fs.
> See test_efi_capsule_firmware.py.
>
> Issues
> ======
> * Timing of executing capsules-on-disk
> Currently, processing a capsule is triggered only as part of
> UEFI subsystem initialization. This means that, for example,
> firmware update, may not take place at system booting time and
> will potentially be delayed until a first call of any UEFI functions.
> => See patch#5 for my proposal
> * A bunch of warnings like
> WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef'
> where possible
> I don't think that fixing those improves anything.
> * Add a document in uefi.rst
>
> TODO's
> ======
> (Won't be addressed in this series.)
> * capsule authentication
> * capsule dependency (dependency expression instruction set)
> * loading drivers in a capsule
> * handling RESET flag in a capsule and QeuryCapsuleCaps
> * full semantics of ESRT (EFI System Resource Table)
> * enabling capsule API at runtime
> * json capsule
> * recovery from update failure
>
> Changes
> =======
> v5 (August 3, 2020)
> * removed superfluous type conversion at dfu_write_from_mem_addr()
> (Patch#2)
> * introduced a common helper function, efi_create_indexed_name()
> (Patch#6,#7,#8)
> * use efi_[get|set]_variable_int(), if necessary, with READ_ONLY
> (Patch#7,#8)
> * return EFI_UNSUPPORTED at Patch#7
> * changed the word, number, to 'index' (Patch#7,#8)
> * removed 'ifdef CONFIG_EFI_CAPSULE_ON_DISK' from a header (Patch#8)
> * initialize 'CapsuleLast' in efi_init_obj_list() (Patch#7,#8)
> * added 'const' qualifier for filename argument at
> efi_capsule_[read|delete]_file() (Patch#8)
>
>
>
> v4 (July 22, 2020)
> * rebased to Heinrich's current efi-2020-10
> * rework dfu-related code to align with Heinrich's change (Patch#1,#3)
> * change a type of 'addr' argument from int to 'void *' per Sughosh's
> comment (Patch#2-#3,#11-#12)
> * rework/simplify pytests (Patch#15-#16)
> - utilize virt-make-fs
> - drop Test Case 1 (updating U-Boot environment data)
> - remove useless definitions (MNT_PNT, EFI_CAPSULE_IMAGE_NAME)
> - apply autopep8
>
> v3 (July 10, 2020)
> * rebased to Heinrich's current efi-2020-10-rc1
> * refactor efi_firmware_[fit|raw]_get_image_info() (patch#11,#13)
>
> v2 (June 17, 2020)
> * rebased to v2020.07-rc4
> * add preparatory patches for dfu (Patch#1-#5, #12)
> * rework FIT capsule driver to utilize dfu_alt_info instead of CONFIG_xxx
> (patch#11)
> * extend get_image_info() to correspond to dfu_alt_info
> (patch#11)
> * add a 'raw binary' capsule support
> (patch#13, #17)
> * allow multiple capsule formats (with different GUIDs) to be installed
> (patch#11, #13)
> * extend mkeficapsule command to accept additional parameters, like
> version/index/hardware instance for a capsule header info.
> (patch#15)
> * mkeficapsule can now also generate raw-binary capsule
> (patch#16)
> * add function descriptions
> * apply autopep8 to pytests and fix more against pylint
>
> v1 (April 27, 2020)
> * rebased to v2020.07-rc
> * removed already-merged patches (RFC's #1 to #4)
> * dropped 'variable update' capsule support (RFC's patch#10)
> * dropped 'variable configuration table' support (RFC's patch#11)
> (Those two should be discussed separately.)
> * add preparatory patches (patch#1/#2)
> * fix several build errors
> * rename some Kconfig options to be aligned with UEFI specification's terms
> (patch#3,4,6,7)
> * enforce UpdateCapsule API to be disabled after ExitBootServices (patch#3)
> * use config table, runtime_services_supported, instead of variable (patch#3)
> * make EFI_CAPSULE_ON_DISK buildable even if UpdateCapsule API is disabled
> (patch4)
> * support OsIndications, invoking capsule-on-disk only if the variable
> indicates so (patch#4)
> * introduced EFI_CAPSULE_ON_DISK_EARLY to invoke capsule-on-disk in U-Boot
> initialization (patch#4)
> * detect capsule files only if they are on EFI system partition (patch#4)
> * use printf, rather than EFI_PRINT, in error cases (patch#4)
> * use 'header_size' field to retrieve capsule data, adding sanity checks
> against capsule size (patch#6)
> * call fmpt driver interfaces with EFI_CALL (patch#6)
> * remove 'variable update capsule'-related code form mkeficapsule (patch#9)
> * add a test case of OsIndications not being set properly (patch#10)
> * adjust test scenario for EFI_CAPSULE_ON_DISK_EARLY (patch#10)
> * revise pytest scripts (patch#10)
>
Hello Lukasz,
most of this patch series are DFU changes.
Could you, please, give us some feedback.
Best regards
Heinrich
> Initial release as RFC (March 17, 2020)
>
> AKASHI Takahiro (17):
> dfu: rename dfu_tftp_write() to dfu_write_by_name()
> dfu: modify an argument type for an address
> common: update: add a generic interface for FIT image
> dfu: export dfu_list
> efi_loader: add option to initialise EFI subsystem early
> efi_loader: add efi_create_indexed_name()
> efi_loader: define UpdateCapsule api
> efi_loader: capsule: add capsule_on_disk support
> efi_loader: capsule: add memory range capsule definitions
> efi_loader: capsule: support firmware update
> efi_loader: add firmware management protocol for FIT image
> dfu: add dfu_write_by_alt()
> efi_loader: add firmware management protocol for raw image
> cmd: add "efidebug capsule" command
> tools: add mkeficapsule command for UEFI capsule update
> test/py: add a test for uefi firmware update capsule of FIT image
> test/py: add a test for uefi firmware update capsule of raw image
>
> cmd/efidebug.c | 235 +++++
> common/Kconfig | 14 +
> common/Makefile | 3 +-
> common/board_r.c | 6 +
> common/main.c | 4 +
> common/update.c | 77 +-
> drivers/dfu/Kconfig | 6 +
> drivers/dfu/Makefile | 2 +-
> drivers/dfu/dfu.c | 2 +-
> drivers/dfu/dfu_alt.c | 125 +++
> drivers/dfu/dfu_tftp.c | 65 --
> include/dfu.h | 57 +-
> include/efi_api.h | 160 +++
> include/efi_loader.h | 30 +
> include/image.h | 12 +
> lib/efi_loader/Kconfig | 72 ++
> lib/efi_loader/Makefile | 2 +
> lib/efi_loader/efi_capsule.c | 910 ++++++++++++++++++
> lib/efi_loader/efi_firmware.c | 398 ++++++++
> lib/efi_loader/efi_runtime.c | 104 +-
> lib/efi_loader/efi_setup.c | 106 +-
> test/py/tests/test_efi_capsule/conftest.py | 72 ++
> test/py/tests/test_efi_capsule/defs.py | 12 +
> .../test_efi_capsule/test_capsule_firmware.py | 241 +++++
> .../tests/test_efi_capsule/uboot_bin_env.its | 36 +
> tools/Makefile | 3 +
> tools/mkeficapsule.c | 237 +++++
> 27 files changed, 2851 insertions(+), 140 deletions(-)
> create mode 100644 drivers/dfu/dfu_alt.c
> delete mode 100644 drivers/dfu/dfu_tftp.c
> create mode 100644 lib/efi_loader/efi_capsule.c
> create mode 100644 lib/efi_loader/efi_firmware.c
> create mode 100644 test/py/tests/test_efi_capsule/conftest.py
> create mode 100644 test/py/tests/test_efi_capsule/defs.py
> create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware.py
> create mode 100644 test/py/tests/test_efi_capsule/uboot_bin_env.its
> create mode 100644 tools/mkeficapsule.c
>
More information about the U-Boot
mailing list