[PATCH 5/6] ARM: dts: k3-j7200-mcu-wakeup: Add CPSW2G support

[Vignesh Raghavendra]

Add MCU NAVSS, UDMA and CPSW2G DT nodes.

Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
---
 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi | 116 ++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
index 8ea25dea88..4c899c8aca 100644
--- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -142,6 +142,49 @@
 		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
 	};
 
+	cbass_mcu_navss: mcu-navss {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <232>;
+
+		mcu_ringacc: ringacc at 2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <235>;
+		};
+
+		mcu_udmap: dma-controller at 285c0000 {
+			compatible = "ti,j721e-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <236>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
+						<0x0f>; /* TX_HCHAN */
+			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
+						<0x0b>; /* RX_HCHAN */
+			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
+		};
+	};
+
 	wkup_gpio0: gpio at 42110000 {
 		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
 		reg = <0x0 0x42110000 0x0 0x100>;
@@ -153,4 +196,77 @@
 		clocks = <&k3_clks 113 0>;
 		clock-names = "gpio";
 	};
+
+	mcu_conf: scm_conf at 40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy at 4040 {
+			compatible = "ti,am654-cpsw-phy-sel";
+			reg = <0x4040 0x4>;
+			reg-names = "gmii-sel";
+			#phy-cells = <1>;
+		};
+	};
+
+	mcu_cpsw: ethernet at 46000000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges;
+		dma-coherent;
+		clocks = <&k3_clks 18 21>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port at 1 {
+				reg = <1>;
+				ti,mac-only;
+				ti,label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio at f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 18 21>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts {
+			clocks = <&k3_clks 18 2>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
 };
-- 
2.28.0