[PATCH 1/2] arm64: a37xx: pci: Make PCIe Reset GPIO DT compatible with Linux kernel DT

[Stefan Roese]

On 19.08.20 15:57, Pali Rohár wrote:
> Change active-high to active-low and change DT property name from
> reset-gpio to reset-gpios. This format of gpio reset is used by
> pci-aardvark driver in Linux kernel.
> 
> Signed-off-by: Pali Rohár <pali at kernel.org>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-3720-db.dts          | 2 +-
>   arch/arm/dts/armada-3720-espressobin.dts | 2 +-
>   arch/arm/dts/armada-3720-turris-mox.dts  | 2 +-
>   drivers/pci/pci-aardvark.c               | 6 +++---
>   4 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
> index 1b219c423b..1b1b66b94d 100644
> --- a/arch/arm/dts/armada-3720-db.dts
> +++ b/arch/arm/dts/armada-3720-db.dts
> @@ -159,6 +159,6 @@
>   &pcie0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pcie_pins>;
> -	reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
> +	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
>   	status = "okay";
>   };
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index 84e2c2adba..f10a953ec5 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -145,6 +145,6 @@
>   &pcie0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pcie_pins>;
> -	reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
> +	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
>   	status = "okay";
>   };
> diff --git a/arch/arm/dts/armada-3720-turris-mox.dts b/arch/arm/dts/armada-3720-turris-mox.dts
> index 0f0a6ce65d..974270cc8c 100644
> --- a/arch/arm/dts/armada-3720-turris-mox.dts
> +++ b/arch/arm/dts/armada-3720-turris-mox.dts
> @@ -172,6 +172,6 @@
>   &pcie0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&pcie_pins>;
> -	reset-gpio = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
> +	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
>   	status = "disabled";
>   };
> diff --git a/drivers/pci/pci-aardvark.c b/drivers/pci/pci-aardvark.c
> index 711b930d0f..5b3f23c184 100644
> --- a/drivers/pci/pci-aardvark.c
> +++ b/drivers/pci/pci-aardvark.c
> @@ -616,7 +616,7 @@ static int pcie_advk_probe(struct udevice *dev)
>   #if CONFIG_IS_ENABLED(DM_GPIO)
>   	struct gpio_desc reset_gpio;
>   
> -	gpio_request_by_name(dev, "reset-gpio", 0, &reset_gpio,
> +	gpio_request_by_name(dev, "reset-gpios", 0, &reset_gpio,
>   			     GPIOD_IS_OUT);
>   	/*
>   	 * Issue reset to add-in card through the dedicated GPIO.
> @@ -633,9 +633,9 @@ static int pcie_advk_probe(struct udevice *dev)
>   	 */
>   	if (dm_gpio_is_valid(&reset_gpio)) {
>   		dev_dbg(pcie->dev, "Toggle PCIE Reset GPIO ...\n");
> -		dm_gpio_set_value(&reset_gpio, 0);
> -		mdelay(200);
>   		dm_gpio_set_value(&reset_gpio, 1);
> +		mdelay(200);
> +		dm_gpio_set_value(&reset_gpio, 0);
>   	}
>   #else
>   	dev_dbg(pcie->dev, "PCIE Reset on GPIO support is missing\n");
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de