[PATCH v2] board: Add support for iMX8QXP AI_ML board

Stefano Babic sbabic at denx.de
Mon Aug 3 17:05:36 CEST 2020


On 03.08.20 17:03, Stefano Babic wrote:
> Hi Mani,
> 
> On 29.07.20 07:05, Manivannan Sadhasivam wrote:
>> This commit adds initial board support for iMX8QXP AI_ML board from
>> Einfochips. This board is one of the 96Boards Consumer Edition and AI
>> boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale.
>>
>> This initial supports contains following peripherals which are tested and
>> known to work:
>>
>> 1. Debug serial via UART2
>> 2. SD card
>> 3. Ethernet
>>
>> More information about this board can be found in arrow website:
>> https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools
>>
>> Reviewed-by: Peng Fan <peng.fan at nxp.com>
>> Reviewed-by: Fabio Estevam <festevam at gmail.com>
>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>> ---
>>
> 
> I see several errors when building this board
> 	https://travis-ci.org/github/sbabic/u-boot-imx/jobs/714193236
> 
> Anyway, where is the DTS for this board ?
> 

It seems I picked up the wrong version, I check it again..

Best regards,
Stefano Babic

> 
>> Changes in v2:
>>
>> * Rebased onto u-boot/master and fixed one build issue
>> * Added review from Fabio
>>
>>  arch/arm/mach-imx/imx8/Kconfig                |  6 ++
>>  board/einfochips/imx8qxp_ai_ml/Kconfig        | 21 ++++
>>  board/einfochips/imx8qxp_ai_ml/MAINTAINERS    |  6 ++
>>  board/einfochips/imx8qxp_ai_ml/Makefile       |  8 ++
>>  board/einfochips/imx8qxp_ai_ml/README         | 49 ++++++++++
>>  .../einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c  | 78 +++++++++++++++
>>  board/einfochips/imx8qxp_ai_ml/imximage.cfg   | 24 +++++
>>  board/einfochips/imx8qxp_ai_ml/spl.c          | 39 ++++++++
>>  configs/imx8qxp_ai_ml_defconfig               | 83 ++++++++++++++++
>>  include/configs/imx8qxp_ai_ml.h               | 95 +++++++++++++++++++
>>  10 files changed, 409 insertions(+)
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/Kconfig
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/MAINTAINERS
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/Makefile
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/README
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/imximage.cfg
>>  create mode 100644 board/einfochips/imx8qxp_ai_ml/spl.c
>>  create mode 100644 configs/imx8qxp_ai_ml_defconfig
>>  create mode 100644 include/configs/imx8qxp_ai_ml.h
>>
>> diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
>> index 9d1f73dfc7..308122d62a 100644
>> --- a/arch/arm/mach-imx/imx8/Kconfig
>> +++ b/arch/arm/mach-imx/imx8/Kconfig
>> @@ -75,6 +75,11 @@ config TARGET_GIEDI
>>  	select BOARD_LATE_INIT
>>  	select IMX8QXP
>>  
>> +config TARGET_IMX8QXP_AI_ML
>> +	bool "Support i.MX8QXP AI_ML board"
>> +	select BOARD_EARLY_INIT_F
>> +	select IMX8QXP
>> +
>>  config TARGET_IMX8QM_MEK
>>  	bool "Support i.MX8QM MEK board"
>>  	select BOARD_LATE_INIT
>> @@ -93,6 +98,7 @@ config TARGET_IMX8QXP_MEK
>>  
>>  endchoice
>>  
>> +source "board/einfochips/imx8qxp_ai_ml/Kconfig"
>>  source "board/freescale/imx8qm_mek/Kconfig"
>>  source "board/freescale/imx8qxp_mek/Kconfig"
>>  source "board/advantech/imx8qm_rom7720_a1/Kconfig"
>> diff --git a/board/einfochips/imx8qxp_ai_ml/Kconfig b/board/einfochips/imx8qxp_ai_ml/Kconfig
>> new file mode 100644
>> index 0000000000..b6806b8859
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/Kconfig
>> @@ -0,0 +1,21 @@
>> +if TARGET_IMX8QXP_AI_ML
>> +
>> +config SYS_BOARD
>> +	default "imx8qxp_ai_ml"
>> +
>> +config SYS_VENDOR
>> +	default "einfochips"
>> +
>> +config SYS_CONFIG_NAME
>> +	default "imx8qxp_ai_ml"
>> +
>> +config SYS_MALLOC_LEN
>> +	default 0x2400000
>> +
>> +config ENV_SIZE
>> +	default 0x1000
>> +
>> +config ENV_OFFSET
>> +	default 0x400000
>> +
>> +endif
>> diff --git a/board/einfochips/imx8qxp_ai_ml/MAINTAINERS b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
>> new file mode 100644
>> index 0000000000..add0bd9431
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/MAINTAINERS
>> @@ -0,0 +1,6 @@
>> +i.MX8QXP AI_ML BOARD
>> +M:	Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
>> +S:	Maintained
>> +F:	board/einfochips/imx8qxp_ai_ml/
>> +F:	include/configs/imx8qxp_ai_ml.h
>> +F:	configs/imx8qxp_ai_ml_defconfig
>> diff --git a/board/einfochips/imx8qxp_ai_ml/Makefile b/board/einfochips/imx8qxp_ai_ml/Makefile
>> new file mode 100644
>> index 0000000000..e08774dc6e
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/Makefile
>> @@ -0,0 +1,8 @@
>> +#
>> +# Copyright 2019 Linaro Ltd.
>> +#
>> +# SPDX-License-Identifier:	GPL-2.0+
>> +#
>> +
>> +obj-y += imx8qxp_ai_ml.o
>> +obj-$(CONFIG_SPL_BUILD) += spl.o
>> diff --git a/board/einfochips/imx8qxp_ai_ml/README b/board/einfochips/imx8qxp_ai_ml/README
>> new file mode 100644
>> index 0000000000..488920580f
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/README
>> @@ -0,0 +1,49 @@
>> +U-Boot for the Einfochips i.MX8QXP AI_ML board
>> +
>> +Quick Start
>> +===========
>> +
>> +- Get and Build the ARM Trusted firmware
>> +- Get scfw_tcm.bin and ahab-container.img
>> +- Build U-Boot
>> +- Flash the binary into the SD card
>> +- Boot
>> +
>> +Get and Build the ARM Trusted firmware
>> +======================================
>> +
>> +$ git clone https://source.codeaurora.org/external/imx/imx-atf
>> +$ cd imx-atf/
>> +$ git checkout origin/imx_4.9.88_imx8qxp_beta2 -b imx_4.9.88_imx8qxp_beta2
>> +$ make PLAT=imx8qxp bl31
>> +
>> +Get scfw_tcm.bin and ahab-container.img
>> +=======================================
>> +
>> +$ wget https://raw.githubusercontent.com/96boards-ai-ml/binaries/master/mx8qx-aiml-scfw-tcm.bin
>> +$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.1.bin
>> +$ chmod +x firmware-imx-8.1.bin
>> +$ ./firmware-imx-8.1.bin
>> +
>> +Copy the following binaries to U-Boot folder:
>> +
>> +$ cp imx-atf/build/imx8qxp/release/bl31.bin .
>> +$ cp firmware-imx-8.1/firmware/seco/mx8qx-ahab-container.img .
>> +
>> +Build U-Boot
>> +============
>> +
>> +$ make imx8qxp_ai_ml_defconfig
>> +$ make u-boot-dtb.imx
>> +
>> +Flash the binary into the SD card
>> +=================================
>> +
>> +Burn the u-boot-dtb.imx binary to SD card offset 32KB:
>> +
>> +$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32
>> +
>> +Boot
>> +====
>> +
>> +Set Boot switch SW2: 1100.
>> diff --git a/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
>> new file mode 100644
>> index 0000000000..7ba014ac07
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/imx8qxp_ai_ml.c
>> @@ -0,0 +1,78 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright 2018 NXP
>> + * Copyright 2019 Linaro Ltd.
>> + */
>> +
>> +#include <common.h>
>> +#include <errno.h>
>> +#include <linux/libfdt.h>
>> +#include <fsl_esdhc.h>
>> +#include <asm/io.h>
>> +#include <asm/arch/clock.h>
>> +#include <asm/arch/sci/sci.h>
>> +#include <asm/arch/imx8-pins.h>
>> +#include <asm/arch/iomux.h>
>> +#include <asm/arch/sys_proto.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +int board_early_init_f(void)
>> +{
>> +	sc_pm_clock_rate_t rate = SC_80MHZ;
>> +	int ret;
>> +
>> +	/* Set UART2 clock root to 80 MHz */
>> +	ret = sc_pm_setup_uart(SC_R_UART_2, rate);
>> +	if (ret)
>> +		return ret;
>> +
>> +	return 0;
>> +}
>> +
>> +#if IS_ENABLED(CONFIG_FEC_MXC)
>> +#include <miiphy.h>
>> +
>> +int board_phy_config(struct phy_device *phydev)
>> +{
>> +	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
>> +	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
>> +
>> +	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
>> +	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
>> +
>> +	if (phydev->drv->config)
>> +		phydev->drv->config(phydev);
>> +
>> +	return 0;
>> +}
>> +#endif
>> +
>> +int checkboard(void)
>> +{
>> +	puts("Board: iMX8QXP AI_ML\n");
>> +
>> +	build_info();
>> +	print_bootinfo();
>> +
>> +	return 0;
>> +}
>> +
>> +int board_init(void)
>> +{
>> +	return 0;
>> +}
>> +
>> +/* Board specific reset that is system reset */
>> +
>> +void reset_cpu(ulong addr)
>> +{
>> +	/* TODO */
>> +}
>> +
>> +#ifdef CONFIG_OF_BOARD_SETUP
>> +int ft_board_setup(void *blob, struct bd_info *bd)
>> +{
>> +	return 0;
>> +}
>> +#endif
>> diff --git a/board/einfochips/imx8qxp_ai_ml/imximage.cfg b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
>> new file mode 100644
>> index 0000000000..4fc5ade313
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/imximage.cfg
>> @@ -0,0 +1,24 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * Copyright 2018 NXP
>> + *
>> + * Refer doc/README.imx8image for more details about how-to configure
>> + * and create imx8image boot image
>> + */
>> +
>> +#define __ASSEMBLY__
>> +
>> +/* Boot from SD, sector size 0x400 */
>> +BOOT_FROM SD 0x400
>> +/* SoC type IMX8QX */
>> +SOC_TYPE IMX8QX
>> +/* Append seco container image */
>> +APPEND mx8qx-ahab-container.img
>> +/* Create the 2nd container */
>> +CONTAINER
>> +/* Add scfw image with exec attribute */
>> +IMAGE SCU mx8qx-aiml-scfw-tcm.bin
>> +/* Add ATF image with exec attribute */
>> +IMAGE A35 bl31.bin 0x80000000
>> +/* Add U-Boot image with load attribute */
>> +DATA A35 u-boot-dtb.bin 0x80020000
>> diff --git a/board/einfochips/imx8qxp_ai_ml/spl.c b/board/einfochips/imx8qxp_ai_ml/spl.c
>> new file mode 100644
>> index 0000000000..2e6e0741e5
>> --- /dev/null
>> +++ b/board/einfochips/imx8qxp_ai_ml/spl.c
>> @@ -0,0 +1,39 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright 2018 NXP
>> + * Copyright 2019 Linaro Ltd.
>> + *
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <spl.h>
>> +#include <dm/uclass.h>
>> +#include <dm/device.h>
>> +#include <dm/uclass-internal.h>
>> +#include <dm/device-internal.h>
>> +#include <dm/lists.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +void spl_board_init(void)
>> +{
>> +	arch_cpu_init();
>> +
>> +	timer_init();
>> +
>> +	preloader_console_init();
>> +
>> +	puts("Normal Boot\n");
>> +}
>> +
>> +void board_init_f(ulong dummy)
>> +{
>> +	/* Clear global data */
>> +	memset((void *)gd, 0, sizeof(gd_t));
>> +
>> +	/* Clear the BSS. */
>> +	memset(__bss_start, 0, __bss_end - __bss_start);
>> +
>> +	board_init_r(NULL, 0);
>> +}
>> diff --git a/configs/imx8qxp_ai_ml_defconfig b/configs/imx8qxp_ai_ml_defconfig
>> new file mode 100644
>> index 0000000000..e20a0c783e
>> --- /dev/null
>> +++ b/configs/imx8qxp_ai_ml_defconfig
>> @@ -0,0 +1,83 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_IMX8=y
>> +CONFIG_SYS_TEXT_BASE=0x80020000
>> +CONFIG_DISTRO_DEFAULTS=y
>> +CONFIG_SPL_GPIO_SUPPORT=y
>> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
>> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
>> +CONFIG_SYS_MALLOC_F_LEN=0x4000
>> +CONFIG_TARGET_IMX8QXP_AI_ML=y
>> +CONFIG_SPL_MMC_SUPPORT=y
>> +CONFIG_SPL_SERIAL_SUPPORT=y
>> +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
>> +CONFIG_NR_DRAM_BANKS=4
>> +CONFIG_SPL=y
>> +CONFIG_FIT=y
>> +CONFIG_SPL_LOAD_FIT=y
>> +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
>> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/einfochips/imx8qxp_ai_ml/imximage.cfg"
>> +CONFIG_BOOTDELAY=3
>> +CONFIG_LOG=y
>> +CONFIG_SPL_BOARD_INIT=y
>> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>> +CONFIG_SPL_SEPARATE_BSS=y
>> +CONFIG_SPL_POWER_SUPPORT=y
>> +CONFIG_SPL_POWER_DOMAIN=y
>> +CONFIG_SPL_WATCHDOG_SUPPORT=y
>> +CONFIG_HUSH_PARSER=y
>> +CONFIG_CMD_CPU=y
>> +# CONFIG_CMD_IMPORTENV is not set
>> +CONFIG_CMD_CLK=y
>> +CONFIG_CMD_DM=y
>> +CONFIG_CMD_FUSE=y
>> +CONFIG_CMD_GPIO=y
>> +CONFIG_CMD_GPT=y
>> +CONFIG_CMD_I2C=y
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_DHCP=y
>> +CONFIG_CMD_MII=y
>> +CONFIG_CMD_PING=y
>> +CONFIG_CMD_CACHE=y
>> +CONFIG_CMD_EXT4=y
>> +CONFIG_CMD_EXT4_WRITE=y
>> +CONFIG_CMD_FAT=y
>> +CONFIG_FAT_WRITE=y
>> +CONFIG_CMD_FS_GENERIC=y
>> +CONFIG_SPL_OF_CONTROL=y
>> +CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-ai_ml"
>> +CONFIG_ENV_IS_IN_MMC=y
>> +CONFIG_SPL_DM=y
>> +CONFIG_SPL_CLK=y
>> +CONFIG_CLK_IMX8=y
>> +CONFIG_CPU=y
>> +CONFIG_DM_GPIO=y
>> +CONFIG_MXC_GPIO=y
>> +CONFIG_DM_I2C=y
>> +CONFIG_SYS_I2C_IMX_LPI2C=y
>> +CONFIG_MISC=y
>> +CONFIG_DM_MMC=y
>> +CONFIG_FSL_ESDHC=y
>> +CONFIG_PHYLIB=y
>> +CONFIG_PHY_ADDR_ENABLE=y
>> +CONFIG_PHY_ATHEROS=y
>> +CONFIG_DM_ETH=y
>> +CONFIG_NET_RANDOM_ETHADDR=y
>> +CONFIG_PHY_GIGE=y
>> +CONFIG_FEC_MXC_SHARE_MDIO=y
>> +CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
>> +CONFIG_FEC_MXC=y
>> +CONFIG_MII=y
>> +CONFIG_PINCTRL=y
>> +CONFIG_SPL_PINCTRL=y
>> +CONFIG_PINCTRL_IMX8=y
>> +CONFIG_POWER_DOMAIN=y
>> +CONFIG_IMX8_POWER_DOMAIN=y
>> +CONFIG_DM_REGULATOR=y
>> +CONFIG_SPL_DM_REGULATOR=y
>> +CONFIG_DM_REGULATOR_FIXED=y
>> +CONFIG_DM_REGULATOR_GPIO=y
>> +CONFIG_SPL_DM_REGULATOR_GPIO=y
>> +CONFIG_DM_SERIAL=y
>> +CONFIG_FSL_LPUART=y
>> +CONFIG_SPL_TINY_MEMSET=y
>> +# CONFIG_EFI_LOADER is not set
>> diff --git a/include/configs/imx8qxp_ai_ml.h b/include/configs/imx8qxp_ai_ml.h
>> new file mode 100644
>> index 0000000000..bdac710103
>> --- /dev/null
>> +++ b/include/configs/imx8qxp_ai_ml.h
>> @@ -0,0 +1,95 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * Copyright 2018 NXP
>> + * Copyright 2019 Linaro Ltd.
>> + */
>> +
>> +#ifndef __IMX8QXP_AI_ML_H
>> +#define __IMX8QXP_AI_ML_H
>> +
>> +#include <linux/sizes.h>
>> +#include <asm/arch/imx-regs.h>
>> +
>> +#ifdef CONFIG_SPL_BUILD
>> +#define CONFIG_SPL_MAX_SIZE				(124 * SZ_1K)
>> +#define CONFIG_SYS_MONITOR_LEN				(SZ_1K * SZ_1K)
>> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
>> +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR		0x250
>> +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION		0
>> +
>> +#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
>> +#define CONFIG_SPL_STACK		0x013E000
>> +#define CONFIG_SPL_BSS_START_ADDR	0x00128000
>> +#define CONFIG_SPL_BSS_MAX_SIZE		SZ_4K	/* 4 KB */
>> +#define CONFIG_SYS_SPL_MALLOC_START	0x00120000
>> +#define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
>> +#define CONFIG_SERIAL_LPUART_BASE	0x5a080000
>> +#define CONFIG_MALLOC_F_ADDR		0x00120000
>> +
>> +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
>> +
>> +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
>> +
>> +#define CONFIG_OF_SEPARATE
>> +#endif
>> +
>> +#define CONFIG_REMAKE_ELF
>> +
>> +/* Flat Device Tree Definitions */
>> +#define CONFIG_OF_BOARD_SETUP
>> +
>> +#define CONFIG_FSL_USDHC
>> +
>> +#define CONFIG_ENV_OVERWRITE
>> +
>> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>> +
>> +#define BOOT_TARGET_DEVICES(func) \
>> +	func(MMC, mmc, 1) \
>> +	func(DHCP, dhcp, na)
>> +
>> +#include <config_distro_bootcmd.h>
>> +/* Initial environment variables */
>> +#define CONFIG_EXTRA_ENV_SETTINGS				\
>> +	"console=ttyLP2 earlycon\0" \
>> +	"fdt_addr_r=0x83000000\0" \
>> +	"kernel_addr_r=0x81000000\0" \
>> +	"ramdisk_addr_r=0x94400000\0" \
>> +	"scriptaddr=0x89000000\0" \
>> +	"fdtfile=imx8qxp-ai_ml.dtb\0"	\
>> +	"fdt_high=0xffffffffffffffff\0"		\
>> +	"image=Image\0" \
>> +	"initrd_addr=0x83800000\0" \
>> +	"initrd_high=0xffffffffffffffff\0" \
>> +	"netargs=setenv bootargs console=${console},${baudrate} " \
>> +		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
>> +		"\0" \
>> +	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
>> +		"imx8qxp-ai_ml/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
>> +	BOOTENV
>> +
>> +/* Link Definitions */
>> +#define CONFIG_LOADADDR			0x80280000
>> +
>> +#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
>> +
>> +#define CONFIG_SYS_INIT_SP_ADDR         0x80200000
>> +
>> +/* USDHC2 is the SD card interface */
>> +#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
>> +#define CONFIG_SYS_FSL_USDHC_NUM	2
>> +
>> +#define CONFIG_SYS_SDRAM_BASE		0x80000000
>> +#define PHYS_SDRAM_1			0x80000000
>> +#define PHYS_SDRAM_2			0x880000000
>> +#define PHYS_SDRAM_1_SIZE		SZ_2G		/* 2 GB */
>> +#define PHYS_SDRAM_2_SIZE		0x00000000	/* 0 GB */
>> +
>> +/* Generic Timer Definitions */
>> +#define COUNTER_FREQUENCY		8000000	/* 8MHz */
>> +
>> +/* Networking */
>> +#define CONFIG_FEC_XCV_TYPE		RGMII
>> +#define FEC_QUIRK_ENET_MAC
>> +
>> +#endif /* __IMX8QXP_AI_ML_H */
>>
> 
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list