[PATCH v2 00/19] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform

Lokesh Vutla lokeshvutla at ti.com
Wed Aug 5 19:19:59 CEST 2020



On 05/08/20 10:44 pm, Lokesh Vutla wrote:
> This series adds initial support for latest new SoC, J7200, from Texas Instruments.
> 
> The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
> It is targeted for for automotive gateway, vehicle compute systems,
> Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
> The SoC aims to meet the complex processing needs of modern embedded products.
> 
> See J7200 Technical Reference Manual (SPRUIU1, June 2020)
> for further details: https://www.ti.com/lit/pdf/spruiu1

Series should have been tagged v3 :)

Thanks and regards,
Lokesh

> 
> Changes since v2:
> - Rebased on top of latest master
> - Addressed comments form Suman and Vignesh
> 
> Changes since v1:
> - Updated compatible for sdhci
> - Enabled CONFIG_OF_BOARD_SETUP for fixuping up msmc dt node.
> - Split R5 dts and A72 dts
> 
> Dave Gerlach (1):
>   arm: dts: k3-j7200: Add R5 specific dts support
> 
> Jean-Jacques Hiblot (1):
>   arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled
> 
> Kishon Vijay Abraham I (1):
>   soc: soc_ti_k3: Add device identification for J7200 SoC
> 
> Lokesh Vutla (15):
>   board: ti: board_detect: Add stub functions for EEPROM detection apis
>   board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is
>     defined
>   arm: mach-k3: Move mmr_unlock to a common location
>   arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
>   arm: mach-k3: j721e: Add detection for j721e
>   arm: mach-k3: j721e: Fix unlocking control module registers
>   arm: mach-k3: j7200: Add support for SOC detection
>   arm: mach-k3: j7200: Add support for storing extended boot info from
>     ROM
>   arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
>   board: ti: j7200: Introduce support for j7200 build targets
>   board: ti: j7200: Add board detection support for j7200
>   ram: k3-j721e: Relax version checks for memory controller
>   arm: dts: k3-j7200: Add dts support
>   configs: j7200_evm_r5: Add initial support
>   configs: j7200_evm_a72: Add Initial support
> 
> Suman Anna (1):
>   board: ti: j721e: Update fdt fixup logic for interconnect nodes
> 
>  arch/arm/dts/Makefile                         |    4 +-
>  .../k3-j7200-common-proc-board-u-boot.dtsi    |  104 +
>  arch/arm/dts/k3-j7200-common-proc-board.dts   |  123 +
>  arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi   | 2195 +++++++++++++++++
>  arch/arm/dts/k3-j7200-main.dtsi               |  313 +++
>  arch/arm/dts/k3-j7200-mcu-wakeup.dtsi         |  117 +
>  .../arm/dts/k3-j7200-r5-common-proc-board.dts |  199 ++
>  arch/arm/dts/k3-j7200-som-p0.dtsi             |   29 +
>  arch/arm/dts/k3-j7200.dtsi                    |  175 ++
>  arch/arm/mach-k3/am6_init.c                   |   12 +-
>  arch/arm/mach-k3/common.c                     |   38 +
>  arch/arm/mach-k3/common.h                     |    6 +
>  arch/arm/mach-k3/config.mk                    |    8 +-
>  arch/arm/mach-k3/include/mach/hardware.h      |    8 +
>  .../arm/mach-k3/include/mach/j721e_hardware.h |    3 +
>  arch/arm/mach-k3/include/mach/sys_proto.h     |    3 +
>  arch/arm/mach-k3/include/mach/sysfw-loader.h  |    4 +-
>  arch/arm/mach-k3/j721e_init.c                 |   30 +-
>  arch/arm/mach-k3/sysfw-loader.c               |   56 +-
>  board/ti/common/board_detect.h                |   13 +
>  board/ti/j721e/Kconfig                        |   53 +
>  board/ti/j721e/evm.c                          |   25 +-
>  configs/j7200_evm_a72_defconfig               |  175 ++
>  configs/j7200_evm_r5_defconfig                |  130 +
>  drivers/ram/k3-j721e/lpddr4.c                 |   16 +-
>  drivers/soc/soc_ti_k3.c                       |    4 +
>  include/configs/j721e_evm.h                   |    4 +-
>  27 files changed, 3776 insertions(+), 71 deletions(-)
>  create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
>  create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
>  create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
>  create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
>  create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
>  create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts
>  create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
>  create mode 100644 arch/arm/dts/k3-j7200.dtsi
>  create mode 100644 configs/j7200_evm_a72_defconfig
>  create mode 100644 configs/j7200_evm_r5_defconfig
> 


More information about the U-Boot mailing list