[PATCH v2 1/4] mmc: pic32: Refresh PIC32 MMC driver

Daniel Schwierzeck daniel.schwierzeck at gmail.com
Mon Aug 31 21:51:08 CEST 2020


Am Montag, den 31.08.2020, 18:04 +0000 schrieb John Robertson:
> The existing driver is not compatible with the Driver Model.
> 
> This patch makes the necessary changes while also removing obsolescent
> calls/properties as follows:
> 
> - fdtdec_* calls replaced with dev_read_* equivalents;
> - 'clock-freq-min-max' property replaced by querying the frequency of
>   the source clock 'base_clk';
> - The card detect erratum workaround is applied during probe rather than
>   overriding get_cd.
> 
> The card detect workaround (Microchip ref. DS80000736E, erratum #15) is
> not needed if the SDCD signal is properly connected on the board and so
> can be disabled using a vendor specific DT property.
> 
> Signed-off-by: John Robertson <john.robertson at simiatec.com>
> ---
> Changes in v2:
> - Split patch;
> - Fix compilation failure after 'make pic32mzdask_defconfig'.
> 
>  drivers/mmc/pic32_sdhci.c | 77 ++++++++++++++++++++++++---------------
>  1 file changed, 48 insertions(+), 29 deletions(-)
> 
> diff --git a/drivers/mmc/pic32_sdhci.c b/drivers/mmc/pic32_sdhci.c
> index 029e0fbc2b..93f0532ad6 100644
> --- a/drivers/mmc/pic32_sdhci.c
> +++ b/drivers/mmc/pic32_sdhci.c
> @@ -9,62 +9,78 @@
>  #include <common.h>
>  #include <dm.h>
>  #include <sdhci.h>
> -#include <linux/errno.h>
> -#include <mach/pic32.h>
> +#include <clk.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;

also remove this and common.h as this is not needed with the dev_* API

>  
> -static int pic32_sdhci_get_cd(struct sdhci_host *host)
> -{
> -	/* PIC32 SDHCI CD errata:
> -	 * - set CD_TEST and clear CD_TEST_INS bit
> -	 */
> -	sdhci_writeb(host, SDHCI_CTRL_CD_TEST, SDHCI_HOST_CONTROL);
> -
> -	return 0;
> -}
> -
> -static const struct sdhci_ops pic32_sdhci_ops = {
> -	.get_cd	= pic32_sdhci_get_cd,
> +struct pic32_sdhci_plat {
> +	struct mmc_config cfg;
> +	struct mmc mmc;
>  };
>  
>  static int pic32_sdhci_probe(struct udevice *dev)
>  {
> +	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
> +	struct pic32_sdhci_plat *plat = dev_get_platdata(dev);
>  	struct sdhci_host *host = dev_get_priv(dev);
> -	const void *fdt = gd->fdt_blob;
> -	u32 f_min_max[2];
> +
>  	fdt_addr_t addr;
>  	fdt_size_t size;
> +	struct clk clk;
> +	ulong clk_rate;
>  	int ret;
>  
> -	addr = fdtdec_get_addr_size(fdt, dev_of_offset(dev), "reg", &size);
> +	addr = dev_read_addr_size(dev, "reg", &size);
>  	if (addr == FDT_ADDR_T_NONE)
>  		return -EINVAL;
>  
> +	ret = clk_get_by_name(dev, "base_clk", &clk);
> +	if (ret)
> +		return ret;
> +
> +	clk_rate = clk_get_rate(&clk);
> +	clk_free(&clk);
> +
> +	if (IS_ERR_VALUE(clk_rate))
> +		return clk_rate;
> +
>  	host->ioaddr	= ioremap(addr, size);

use dev_remap_addr() instead of dev_read_addr_size() + ioremap()

>  	host->name	= dev->name;
>  	host->quirks	= SDHCI_QUIRK_NO_HISPD_BIT;
> -	host->bus_width	= fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
> -					"bus-width", 4);
> -	host->ops = &pic32_sdhci_ops;
> -
> -	ret = fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev),
> -				   "clock-freq-min-max", f_min_max, 2);
> -	if (ret) {
> -		printf("sdhci: clock-freq-min-max not found\n");
> +	host->bus_width	= dev_read_u32_default(dev, "bus-width", 4);
> +	host->max_clk   = clk_rate;
> +
> +	host->mmc = &plat->mmc;
> +	host->mmc->dev = dev;
> +
> +	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
> +	if (ret)
>  		return ret;
> -	}
>  
> -	host->max_clk   = f_min_max[1];
> +	host->mmc->priv = host;
> +	upriv->mmc = host->mmc;
>  
> -	ret = add_sdhci(host, 0, f_min_max[0]);
> +	ret = sdhci_probe(dev);
>  	if (ret)
>  		return ret;
> -	host->mmc->dev = dev;
> +
> +	if (!dev_read_bool(dev, "microchip,use-sdcd")) {
> +		// Use workaround 1 for erratum #15 by default
> +		u8 ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> +		ctrl = (ctrl & ~SDHCI_CTRL_CD_TEST_INS) | SDHCI_CTRL_CD_TEST;
> +		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +	}
>  
>  	return 0;
>  }
>  
> +static int pic32_sdhci_bind(struct udevice *dev)
> +{
> +	struct pic32_sdhci_plat *plat = dev_get_platdata(dev);
> +
> +	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
> +}
> +
>  static const struct udevice_id pic32_sdhci_ids[] = {
>  	{ .compatible = "microchip,pic32mzda-sdhci" },
>  	{ }
> @@ -74,6 +90,9 @@ U_BOOT_DRIVER(pic32_sdhci_drv) = {
>  	.name			= "pic32_sdhci",
>  	.id			= UCLASS_MMC,
>  	.of_match		= pic32_sdhci_ids,
> +	.ops			= &sdhci_ops,
> +	.bind			= pic32_sdhci_bind,
>  	.probe			= pic32_sdhci_probe,
>  	.priv_auto_alloc_size	= sizeof(struct sdhci_host),
> +	.platdata_auto_alloc_size = sizeof(struct pic32_sdhci_plat)
>  };
-- 
- Daniel



More information about the U-Boot mailing list