[PATCH 1/2] ti: Use devtype=mmc instead of setenv devtype mmc

Matwey V. Kornilov matwey.kornilov at gmail.com
Mon Aug 24 20:00:32 CEST 2020


If devtype variable is setted via setenv, then the following devtype=X style is
ignored. Currently, many u-boot commands use devtype variable in the latter
manner:

    mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi

Use devtype=mmc instead of setenv devtype mmc to avoid bugs with booting from
another devtype.

Signed-off-by: Matwey V. Kornilov <matwey.kornilov at gmail.com>
---
 include/environment/ti/mmc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/environment/ti/mmc.h b/include/environment/ti/mmc.h
index 1c8e49a8b3..b86c8dc7a4 100644
--- a/include/environment/ti/mmc.h
+++ b/include/environment/ti/mmc.h
@@ -57,7 +57,7 @@
 		"fi;\0" \
 	"mmcboot=mmc dev ${mmcdev}; " \
 		"devnum=${mmcdev}; " \
-		"setenv devtype mmc; " \
+		"devtype=mmc; " \
 		"if mmc rescan; then " \
 			"echo SD/MMC found on device ${mmcdev};" \
 			"if run loadimage; then " \
-- 
2.26.2



More information about the U-Boot mailing list