[PATCH 5/5] arm: mvebu: Update CRS305-1G-4S board flash layout

Stefan Roese sr at denx.de
Thu Aug 6 14:08:35 CEST 2020


On 23.07.20 10:56, Luka Kovacic wrote:
> Update the MikroTik CRS305-1G-4S flash layout to support redundant UBI
> partitions.
> Additionally enable the UBI commands in crs305-1g-4s_defconfig.
> 
> Signed-off-by: Luka Kovacic <luka.kovacic at sartura.hr>
> Cc: Luka Perkov <luka.perkov at sartura.hr>
> Cc: Jakov Petrina <jakov.petrina at sartura.hr>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/arm/dts/armada-xp-crs305-1g-4s.dtsi | 10 +++++-----
>   configs/crs305-1g-4s_defconfig           |  9 ++++++++-
>   2 files changed, 13 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi
> index c8839eac94..1a74ecd5b5 100644
> --- a/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi
> +++ b/arch/arm/dts/armada-xp-crs305-1g-4s.dtsi
> @@ -95,16 +95,16 @@
>   		m25p,fast-read;
>   
>   		partition at u-boot {
> -			reg = <0x00000000 0x00080000>;
> +			reg = <0x00000000 0x001f0000>;
>   			label = "u-boot";
>   		};
>   		partition at u-boot-env {
> -			reg = <0x00080000 0x00010000>;
> +			reg = <0x001f0000 0x00010000>;
>   			label = "u-boot-env";
>   		};
> -		partition at firmware {
> -			reg = <0x00090000 0x00f70000>;
> -			label = "firmware";
> +		partition at ubi1 {
> +			reg = <0x00200000 0x00e00000>;
> +			label = "ubi1";
>   		};
>   
>   	};
> diff --git a/configs/crs305-1g-4s_defconfig b/configs/crs305-1g-4s_defconfig
> index a360fc5d3f..a62b14e856 100644
> --- a/configs/crs305-1g-4s_defconfig
> +++ b/configs/crs305-1g-4s_defconfig
> @@ -5,14 +5,17 @@ CONFIG_SYS_TEXT_BASE=0x00800000
>   CONFIG_SYS_MALLOC_F_LEN=0x2000
>   CONFIG_TARGET_CRS3XX_98DX3236=y
>   CONFIG_ENV_SIZE=0x10000
> -CONFIG_ENV_OFFSET=0x80000
> +CONFIG_ENV_OFFSET=0x1F0000
>   CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_BOOTCOUNT_BOOTLIMIT=3
>   CONFIG_BUILD_TARGET="u-boot.kwb"
>   CONFIG_FIT=y
> +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
>   CONFIG_FIT_VERBOSE=y
>   CONFIG_FIT_BEST_MATCH=y
>   CONFIG_USE_PREBOOT=y
>   CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +CONFIG_HUSH_PARSER=y
>   CONFIG_AUTOBOOT_KEYED=y
>   CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
>   CONFIG_AUTOBOOT_STOP_STR="s"
> @@ -22,11 +25,15 @@ CONFIG_CMD_BOOTZ=y
>   CONFIG_CMD_MTD=y
>   CONFIG_CMD_SPI=y
>   CONFIG_CMD_CACHE=y
> +CONFIG_CMD_UBI=y
> +CONFIG_CMD_FS_GENERIC=y
>   CONFIG_CMD_MTDPARTS=y
>   CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s"
>   CONFIG_ENV_IS_IN_SPI_FLASH=y
>   CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>   CONFIG_BLK=y
> +CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
>   # CONFIG_MMC is not set
>   CONFIG_MTD=y
>   CONFIG_DM_MTD=y
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list