[PATCH 6/7] sunxi: Convert 64-bit boards to use binman

Simon Glass sjg at chromium.org
Sat Aug 22 04:36:57 CEST 2020


At present 64-bit sunxi board use the Makefile to create a FIT, using
USE_SPL_FIT_GENERATOR. This is deprecated.

Update sunxi to use binman instead.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 Kconfig                        |  3 +-
 Makefile                       | 18 ++--------
 arch/arm/dts/sunxi-u-boot.dtsi | 60 +++++++++++++++++++++++++++++++++-
 3 files changed, 62 insertions(+), 19 deletions(-)

diff --git a/Kconfig b/Kconfig
index 883e3f71d01..837b2f517ae 100644
--- a/Kconfig
+++ b/Kconfig
@@ -659,12 +659,11 @@ config SPL_FIT_SOURCE
 
 config USE_SPL_FIT_GENERATOR
 	bool "Use a script to generate the .its script"
-	default y if SPL_FIT
+	default y if SPL_FIT && !ARCH_SUNXI
 
 config SPL_FIT_GENERATOR
 	string ".its file generator script for U-Boot FIT image"
 	depends on USE_SPL_FIT_GENERATOR
-	default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
 	default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
 	default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT && ARCH_ZYNQMP
 	default "arch/riscv/lib/mkimage_fit_opensbi.sh" if SPL_LOAD_FIT && RISCV
diff --git a/Makefile b/Makefile
index d9a08818cda..8e175bd0b40 100644
--- a/Makefile
+++ b/Makefile
@@ -923,11 +923,6 @@ INPUTS-$(CONFIG_REMAKE_ELF) += u-boot.elf
 INPUTS-$(CONFIG_EFI_APP) += u-boot-app.efi
 INPUTS-$(CONFIG_EFI_STUB) += u-boot-payload.efi
 
-# Build a combined spl + u-boot image for sunxi
-ifeq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64)$(CONFIG_SPL),yyy)
-INPUTS-y += u-boot-sunxi-with-spl.bin
-endif
-
 # Generate this input file for binman
 ifeq ($(CONFIG_SPL),)
 INPUTS-$(CONFIG_ARCH_MEDIATEK) += u-boot-mtk.bin
@@ -1024,13 +1019,9 @@ PHONY += inputs
 inputs: $(INPUTS-y)
 
 all: .binman_stamp inputs
-# Hack for sunxi which doesn't have a proper binman definition for
-# 64-bit boards
-ifneq ($(CONFIG_ARCH_SUNXI)$(CONFIG_ARM64),yy)
 ifeq ($(CONFIG_BINMAN),y)
 	$(call if_changed,binman)
 endif
-endif
 
 # Timestamp file to make sure that binman always runs
 .binman_stamp: FORCE
@@ -1337,6 +1328,8 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
 		build -u -d u-boot.dtb -O . \
 		$(if $(BUILD_ROM),,-m --allow-missing) \
 		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
+		-I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
+		-a atf-bl31-path=${BL31} \
 		$(BINMAN_$(@F))
 
 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
@@ -1626,13 +1619,6 @@ u-boot-x86-reset16.bin: u-boot FORCE
 
 endif # CONFIG_X86
 
-ifneq ($(CONFIG_ARCH_SUNXI),)
-ifeq ($(CONFIG_ARM64),y)
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
-	$(call if_changed,cat)
-endif
-endif
-
 OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
 u-boot-app.efi: u-boot FORCE
 	$(call if_changed,zobjcopy)
diff --git a/arch/arm/dts/sunxi-u-boot.dtsi b/arch/arm/dts/sunxi-u-boot.dtsi
index fdd4c80aa46..98f98d644e9 100644
--- a/arch/arm/dts/sunxi-u-boot.dtsi
+++ b/arch/arm/dts/sunxi-u-boot.dtsi
@@ -5,14 +5,72 @@
 		mmc1 = &mmc2;
 	};
 
-	binman {
+	binman: binman {
+		multiple-images;
+	};
+};
+
+&binman {
+	u-boot-sunxi-with-spl {
 		filename = "u-boot-sunxi-with-spl.bin";
 		pad-byte = <0xff>;
 		blob {
 			filename = "spl/sunxi-spl.bin";
 		};
+#ifdef CONFIG_ARM64
+		fit {
+			description = "Configuration to load ATF before U-Boot";
+			#address-cells = <1>;
+
+			images {
+				uboot {
+					description = "U-Boot (64-bit)";
+					type = "standalone";
+					arch = "arm64";
+					compression = "none";
+					load = <0x4a000000>;
+
+					u-boot-nodtb {
+					};
+				};
+				atf {
+					description = "ARM Trusted Firmware";
+					type = "firmware";
+					arch = "arm64";
+					compression = "none";
+/* TODO: Do this with an overwrite in this board's dtb? */
+#ifdef CONFIG_MACH_SUN50I_H6
+					load = <0x104000>;
+					entry = <0x104000>;
+#else
+					load = <0x44000>;
+					entry = <0x44000>;
+#endif
+					atf-bl31 {
+					};
+				};
+
+				@fdt-SEQ {
+					description = "NAME";
+					type = "flat_dt";
+					compression = "none";
+				};
+			};
+
+			configurations {
+				default = "config-1";
+				@config-SEQ {
+					description = "NAME";
+					firmware = "uboot";
+					loadables = "atf";
+					fdt = "fdt-SEQ";
+				};
+			};
+		};
+#else
 		u-boot-img {
 			offset = <CONFIG_SPL_PAD_TO>;
 		};
+#endif
 	};
 };
-- 
2.28.0.297.g1956fa8f8d-goog



More information about the U-Boot mailing list