[PATCH 3/5] arm: mvebu: Add CRS328-4C-20S-4S board
Stefan Roese
sr at denx.de
Thu Aug 6 14:08:06 CEST 2020
On 23.07.20 10:56, Luka Kovacic wrote:
> MikroTik CRS328-4C-20S-4S board has a switch chip with an integrated
> Marvell Prestera 98DX3236 CPU.
>
> This commit includes two board variants, namely the factory
> default one and a Bit variant. The Bit board variant has a
> bigger Macronix flash.
>
> Add basic U-Boot, UART and SPI flash support.
>
> Signed-off-by: Luka Kovacic <luka.kovacic at sartura.hr>
> Cc: Luka Perkov <luka.perkov at sartura.hr>
> Cc: Jakov Petrina <jakov.petrina at sartura.hr>
Reviewed-by: Stefan Roese <sr at denx.de>
Thanks,
Stefan
> ---
> arch/arm/dts/Makefile | 2 +
> .../dts/armada-xp-crs328-4c-20s-4s-bit.dts | 43 +++++++
> .../armada-xp-crs328-4c-20s-4s-u-boot.dtsi | 13 +++
> arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts | 17 +++
> arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi | 110 ++++++++++++++++++
> board/mikrotik/crs3xx-98dx3236/MAINTAINERS | 9 ++
> configs/crs328-4c-20s-4s-bit_defconfig | 54 +++++++++
> configs/crs328-4c-20s-4s_defconfig | 54 +++++++++
> 8 files changed, 302 insertions(+)
> create mode 100644 arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts
> create mode 100644 arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi
> create mode 100644 arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts
> create mode 100644 arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi
> create mode 100644 configs/crs328-4c-20s-4s-bit_defconfig
> create mode 100644 configs/crs328-4c-20s-4s_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 9f8ca61f28..deced1ad7d 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -216,6 +216,8 @@ dtb-$(CONFIG_ARCH_MVEBU) += \
> armada-xp-crs305-1g-4s-bit.dtb \
> armada-xp-crs326-24g-2s.dtb \
> armada-xp-crs326-24g-2s-bit.dtb \
> + armada-xp-crs328-4c-20s-4s.dtb \
> + armada-xp-crs328-4c-20s-4s-bit.dtb \
> armada-xp-db-xc3-24g4xg.dtb \
> armada-xp-gp.dtb \
> armada-xp-maxbcm.dtb \
> diff --git a/arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts
> new file mode 100644
> index 0000000000..d684c895ff
> --- /dev/null
> +++ b/arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts
> @@ -0,0 +1,43 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
> + *
> + * Copyright (C) 2020 Sartura Ltd.
> + * Author: Luka Kovacic <luka.kovacic at sartura.hr>
> + */
> +
> +#include "armada-xp-crs328-4c-20s-4s.dtsi"
> +
> +/ {
> + model = "MikroTik CRS328-4C-20S-4S+ Bit";
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spi-flash", "jedec,spi-nor";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <108000000>;
> + m25p,fast-read;
> +
> + partition at u-boot {
> + reg = <0x00000000 0x001f0000>;
> + label = "u-boot";
> + };
> + partition at u-boot-env {
> + reg = <0x001f0000 0x00010000>;
> + label = "u-boot-env";
> + };
> + partition at ubi1 {
> + reg = <0x00200000 0x03f00000>;
> + label = "ubi1";
> + };
> + partition at ubi2 {
> + reg = <0x04100000 0x03f00000>;
> + label = "ubi2";
> + };
> + };
> +};
> diff --git a/arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi b/arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi
> new file mode 100644
> index 0000000000..8576a02730
> --- /dev/null
> +++ b/arch/arm/dts/armada-xp-crs328-4c-20s-4s-u-boot.dtsi
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&spi0 {
> + u-boot,dm-pre-reloc;
> +
> + spi-flash at 0 {
> + u-boot,dm-pre-reloc;
> + };
> +};
> diff --git a/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts
> new file mode 100644
> index 0000000000..665757f6e1
> --- /dev/null
> +++ b/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for MikroTik CRS328-4C-20S-4S+ board
> + *
> + * Copyright (C) 2020 Sartura Ltd.
> + * Author: Luka Kovacic <luka.kovacic at sartura.hr>
> + */
> +
> +#include "armada-xp-crs328-4c-20s-4s.dtsi"
> +
> +/ {
> + model = "MikroTik CRS328-4C-20S-4S+";
> +};
> +
> +&spi0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi
> new file mode 100644
> index 0000000000..daff1af2a2
> --- /dev/null
> +++ b/arch/arm/dts/armada-xp-crs328-4c-20s-4s.dtsi
> @@ -0,0 +1,110 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for CRS328-4C-20S-4S+ board
> + *
> + * Copyright (C) 2016 Allied Telesis Labs
> + * Copyright (C) 2020 Sartura Ltd.
> + *
> + * Based on armada-xp-db.dts
> + *
> + * Note: this Device Tree assumes that the bootloader has remapped the
> + * internal registers to 0xf1000000 (instead of the default
> + * 0xd0000000). The 0xf1000000 is the default used by the recent,
> + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
> + * boards were delivered with an older version of the bootloader that
> + * left internal registers mapped at 0xd0000000. If you are in this
> + * situation, you should either update your bootloader (preferred
> + * solution) or the below Device Tree should be adjusted.
> + */
> +
> +/dts-v1/;
> +#include "armada-xp-98dx3236.dtsi"
> +#include "armada-xp-crs328-4c-20s-4s-u-boot.dtsi"
> +
> +/ {
> + model = "CRS328-4C-20S-4S+";
> + compatible = "marvell,armadaxp-98dx3236", "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + bootargs = "console=ttyS0,115200 earlyprintk";
> + };
> +
> + aliases {
> + spi0 = &spi0;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
> + };
> +};
> +
> +&L2 {
> + arm,parity-enable;
> + marvell,ecc-enable;
> +};
> +
> +&devbus_bootcs {
> + status = "okay";
> +
> + /* Device Bus parameters are required */
> +
> + /* Read parameters */
> + devbus,bus-width = <16>;
> + devbus,turn-off-ps = <60000>;
> + devbus,badr-skew-ps = <0>;
> + devbus,acc-first-ps = <124000>;
> + devbus,acc-next-ps = <248000>;
> + devbus,rd-setup-ps = <0>;
> + devbus,rd-hold-ps = <0>;
> +
> + /* Write parameters */
> + devbus,sync-enable = <0>;
> + devbus,wr-high-ps = <60000>;
> + devbus,wr-low-ps = <60000>;
> + devbus,ale-wr-ps = <60000>;
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + clock-frequency = <100000>;
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&spi0 {
> + status = "okay";
> +
> + spi-flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "spi-flash", "jedec,spi-nor";
> + reg = <0>; /* Chip select 0 */
> + spi-max-frequency = <108000000>;
> + m25p,fast-read;
> +
> + partition at u-boot {
> + reg = <0x00000000 0x001f0000>;
> + label = "u-boot";
> + };
> + partition at u-boot-env {
> + reg = <0x001f0000 0x00010000>;
> + label = "u-boot-env";
> + };
> + partition at ubi1 {
> + reg = <0x00200000 0x00e00000>;
> + label = "ubi1";
> + };
> + };
> +};
> diff --git a/board/mikrotik/crs3xx-98dx3236/MAINTAINERS b/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
> index 7f01f4318e..e6fbf3db1c 100644
> --- a/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
> +++ b/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
> @@ -21,3 +21,12 @@ F: configs/crs326-24g-2s_defconfig
> F: configs/crs326-24g-2s-bit_defconfig
> F: arch/arm/dts/armada-xp-crs326-24g-2s.dts
> F: arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
> +
> +CRS328-4C-20S-4S BOARD
> +M: Luka Kovacic <luka.kovacic at sartura.hr>
> +M: Luka Perkov <luka.perkov at sartura.hr>
> +S: Maintained
> +F: configs/crs328-4c-20s-4s_defconfig
> +F: configs/crs328-4c-20s-4s-bit_defconfig
> +F: arch/arm/dts/armada-xp-crs328-4c-20s-4s.dts
> +F: arch/arm/dts/armada-xp-crs328-4c-20s-4s-bit.dts
> diff --git a/configs/crs328-4c-20s-4s-bit_defconfig b/configs/crs328-4c-20s-4s-bit_defconfig
> new file mode 100644
> index 0000000000..9b949e63da
> --- /dev/null
> +++ b/configs/crs328-4c-20s-4s-bit_defconfig
> @@ -0,0 +1,54 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_CPU_INIT=y
> +CONFIG_ARCH_MVEBU=y
> +CONFIG_SYS_TEXT_BASE=0x00800000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_TARGET_CRS3XX_98DX3236=y
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x1F0000
> +CONFIG_BOOTCOUNT_BOOTLIMIT=3
> +# CONFIG_EFI_LOADER is not set
> +CONFIG_BUILD_TARGET="u-boot.kwb"
> +CONFIG_USE_PREBOOT=y
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_AUTOBOOT_KEYED=y
> +CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
> +CONFIG_AUTOBOOT_STOP_STR="s"
> +CONFIG_AUTOBOOT_KEYED_CTRLC=y
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_I2C is not set
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_UBI=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_MTD=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s-bit"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_BLK=y
> +CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> +# CONFIG_DM_I2C is not set
> +# CONFIG_SYS_I2C_MVTWSI is not set
> +# CONFIG_MMC is not set
> +CONFIG_MTD=y
> +CONFIG_MTD_PARTITIONS=y
> +CONFIG_DM_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_MTD=y
> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_MACRONIX=y
> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_FIT_BEST_MATCH=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MVEBU=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_KIRKWOOD_SPI=y
> diff --git a/configs/crs328-4c-20s-4s_defconfig b/configs/crs328-4c-20s-4s_defconfig
> new file mode 100644
> index 0000000000..33eefbd475
> --- /dev/null
> +++ b/configs/crs328-4c-20s-4s_defconfig
> @@ -0,0 +1,54 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_CPU_INIT=y
> +CONFIG_ARCH_MVEBU=y
> +CONFIG_SYS_TEXT_BASE=0x00800000
> +CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_TARGET_CRS3XX_98DX3236=y
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x1F0000
> +CONFIG_BOOTCOUNT_BOOTLIMIT=3
> +# CONFIG_EFI_LOADER is not set
> +CONFIG_BUILD_TARGET="u-boot.kwb"
> +CONFIG_USE_PREBOOT=y
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_AUTOBOOT_KEYED=y
> +CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
> +CONFIG_AUTOBOOT_STOP_STR="s"
> +CONFIG_AUTOBOOT_KEYED_CTRLC=y
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_I2C is not set
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_UBI=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_CMD_MTD=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_BLK=y
> +CONFIG_BOOTCOUNT_LIMIT=y
> +CONFIG_BOOTCOUNT_ENV=y
> +# CONFIG_DM_I2C is not set
> +# CONFIG_SYS_I2C_MVTWSI is not set
> +# CONFIG_MMC is not set
> +CONFIG_MTD=y
> +CONFIG_MTD_PARTITIONS=y
> +CONFIG_DM_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SPI_FLASH_MTD=y
> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_WINBOND=y
> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
> +CONFIG_FIT=y
> +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_FIT_BEST_MATCH=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MVEBU=y
> +CONFIG_SYS_NS16550=y
> +CONFIG_KIRKWOOD_SPI=y
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list