[PATCH 2/5] arm: mvebu: Add CRS326-24G-2S board

Stefan Roese sr at denx.de
Thu Aug 6 16:26:21 CEST 2020


On 06.08.20 14:07, Stefan Roese wrote:
> On 23.07.20 10:56, Luka Kovacic wrote:
>> MikroTik CRS326-24G-2S board has a switch chip with an integrated
>> Marvell Prestera 98DX3236 CPU.
>>
>> This commit includes two board variants, namely the factory
>> default one and a Bit variant. The Bit board variant has a
>> bigger Macronix flash.
>>
>> Add basic U-Boot, UART and SPI flash support.
>>
>> Signed-off-by: Luka Kovacic <luka.kovacic at sartura.hr>
>> Cc: Luka Perkov <luka.perkov at sartura.hr>
>> Cc: Jakov Petrina <jakov.petrina at sartura.hr>
> 
> Reviewed-by: Stefan Roese <sr at denx.de>

Applied to u-boot-marvell/master

Thanks,
Stefan

> Thanks,
> Stefan
> 
>> ---
>>   arch/arm/dts/Makefile                         |   2 +
>>   arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts  |  43 +++++++
>>   .../dts/armada-xp-crs326-24g-2s-u-boot.dtsi   |  13 +++
>>   arch/arm/dts/armada-xp-crs326-24g-2s.dts      |  17 +++
>>   arch/arm/dts/armada-xp-crs326-24g-2s.dtsi     | 110 ++++++++++++++++++
>>   board/mikrotik/crs3xx-98dx3236/MAINTAINERS    |   9 ++
>>   configs/crs326-24g-2s-bit_defconfig           |  54 +++++++++
>>   configs/crs326-24g-2s_defconfig               |  54 +++++++++
>>   8 files changed, 302 insertions(+)
>>   create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
>>   create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
>>   create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s.dts
>>   create mode 100644 arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
>>   create mode 100644 configs/crs326-24g-2s-bit_defconfig
>>   create mode 100644 configs/crs326-24g-2s_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 72e1f4fa20..9f8ca61f28 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -214,6 +214,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=            \
>>       armada-8040-mcbin.dtb            \
>>       armada-xp-crs305-1g-4s.dtb        \
>>       armada-xp-crs305-1g-4s-bit.dtb        \
>> +    armada-xp-crs326-24g-2s.dtb        \
>> +    armada-xp-crs326-24g-2s-bit.dtb        \
>>       armada-xp-db-xc3-24g4xg.dtb        \
>>       armada-xp-gp.dtb            \
>>       armada-xp-maxbcm.dtb            \
>> diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts 
>> b/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
>> new file mode 100644
>> index 0000000000..b340eedf71
>> --- /dev/null
>> +++ b/arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
>> @@ -0,0 +1,43 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
>> + *
>> + * Copyright (C) 2020 Sartura Ltd.
>> + * Author: Luka Kovacic <luka.kovacic at sartura.hr>
>> + */
>> +
>> +#include "armada-xp-crs326-24g-2s.dtsi"
>> +
>> +/ {
>> +    model = "MikroTik CRS326-24G-2S+ Bit";
>> +};
>> +
>> +&spi0 {
>> +    status = "okay";
>> +
>> +    spi-flash at 0 {
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        compatible = "spi-flash", "jedec,spi-nor";
>> +        reg = <0>; /* Chip select 0 */
>> +        spi-max-frequency = <108000000>;
>> +        m25p,fast-read;
>> +
>> +        partition at u-boot {
>> +            reg = <0x00000000 0x001f0000>;
>> +            label = "u-boot";
>> +        };
>> +        partition at u-boot-env {
>> +            reg = <0x001f0000 0x00010000>;
>> +            label = "u-boot-env";
>> +        };
>> +        partition at ubi1 {
>> +            reg = <0x00200000 0x03f00000>;
>> +            label = "ubi1";
>> +        };
>> +        partition at ubi2 {
>> +            reg = <0x04100000 0x03f00000>;
>> +            label = "ubi2";
>> +        };
>> +    };
>> +};
>> diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi 
>> b/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
>> new file mode 100644
>> index 0000000000..8576a02730
>> --- /dev/null
>> +++ b/arch/arm/dts/armada-xp-crs326-24g-2s-u-boot.dtsi
>> @@ -0,0 +1,13 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +
>> +&uart0 {
>> +    u-boot,dm-pre-reloc;
>> +};
>> +
>> +&spi0 {
>> +    u-boot,dm-pre-reloc;
>> +
>> +    spi-flash at 0 {
>> +        u-boot,dm-pre-reloc;
>> +    };
>> +};
>> diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s.dts 
>> b/arch/arm/dts/armada-xp-crs326-24g-2s.dts
>> new file mode 100644
>> index 0000000000..83aef43f66
>> --- /dev/null
>> +++ b/arch/arm/dts/armada-xp-crs326-24g-2s.dts
>> @@ -0,0 +1,17 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Device Tree file for MikroTik CRS326-24G-2S+ board
>> + *
>> + * Copyright (C) 2020 Sartura Ltd.
>> + * Author: Luka Kovacic <luka.kovacic at sartura.hr>
>> + */
>> +
>> +#include "armada-xp-crs326-24g-2s.dtsi"
>> +
>> +/ {
>> +    model = "MikroTik CRS326-24G-2S+";
>> +};
>> +
>> +&spi0 {
>> +    status = "okay";
>> +};
>> diff --git a/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi 
>> b/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
>> new file mode 100644
>> index 0000000000..e50f3ead13
>> --- /dev/null
>> +++ b/arch/arm/dts/armada-xp-crs326-24g-2s.dtsi
>> @@ -0,0 +1,110 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Device Tree file for CRS326-24G-2S board
>> + *
>> + * Copyright (C) 2016 Allied Telesis Labs
>> + * Copyright (C) 2020 Sartura Ltd.
>> + *
>> + * Based on armada-xp-db.dts
>> + *
>> + * Note: this Device Tree assumes that the bootloader has remapped the
>> + * internal registers to 0xf1000000 (instead of the default
>> + * 0xd0000000). The 0xf1000000 is the default used by the recent,
>> + * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
>> + * boards were delivered with an older version of the bootloader that
>> + * left internal registers mapped at 0xd0000000. If you are in this
>> + * situation, you should either update your bootloader (preferred
>> + * solution) or the below Device Tree should be adjusted.
>> + */
>> +
>> +/dts-v1/;
>> +#include "armada-xp-98dx3236.dtsi"
>> +#include "armada-xp-crs326-24g-2s-u-boot.dtsi"
>> +
>> +/ {
>> +    model = "CRS326-24G-2S+";
>> +    compatible = "marvell,armadaxp-98dx3236", 
>> "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
>> +
>> +    chosen {
>> +        stdout-path = "serial0:115200n8";
>> +        bootargs = "console=ttyS0,115200 earlyprintk";
>> +    };
>> +
>> +    aliases {
>> +        spi0 = &spi0;
>> +    };
>> +
>> +    memory {
>> +        device_type = "memory";
>> +        reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
>> +    };
>> +};
>> +
>> +&L2 {
>> +    arm,parity-enable;
>> +    marvell,ecc-enable;
>> +};
>> +
>> +&devbus_bootcs {
>> +    status = "okay";
>> +
>> +    /* Device Bus parameters are required */
>> +
>> +    /* Read parameters */
>> +    devbus,bus-width    = <16>;
>> +    devbus,turn-off-ps  = <60000>;
>> +    devbus,badr-skew-ps = <0>;
>> +    devbus,acc-first-ps = <124000>;
>> +    devbus,acc-next-ps  = <248000>;
>> +    devbus,rd-setup-ps  = <0>;
>> +    devbus,rd-hold-ps   = <0>;
>> +
>> +    /* Write parameters */
>> +    devbus,sync-enable = <0>;
>> +    devbus,wr-high-ps  = <60000>;
>> +    devbus,wr-low-ps   = <60000>;
>> +    devbus,ale-wr-ps   = <60000>;
>> +};
>> +
>> +&uart0 {
>> +    status = "okay";
>> +};
>> +
>> +&uart1 {
>> +    status = "okay";
>> +};
>> +
>> +&i2c0 {
>> +    clock-frequency = <100000>;
>> +    status = "okay";
>> +};
>> +
>> +&usb0 {
>> +    status = "okay";
>> +};
>> +
>> +&spi0 {
>> +    status = "okay";
>> +
>> +    spi-flash at 0 {
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        compatible = "spi-flash", "jedec,spi-nor";
>> +        reg = <0>; /* Chip select 0 */
>> +        spi-max-frequency = <108000000>;
>> +        m25p,fast-read;
>> +
>> +        partition at u-boot {
>> +            reg = <0x00000000 0x001f0000>;
>> +            label = "u-boot";
>> +        };
>> +        partition at u-boot-env {
>> +            reg = <0x001f0000 0x00010000>;
>> +            label = "u-boot-env";
>> +        };
>> +        partition at ubi1 {
>> +            reg = <0x00200000 0x00e00000>;
>> +            label = "ubi1";
>> +        };
>> +    };
>> +};
>> diff --git a/board/mikrotik/crs3xx-98dx3236/MAINTAINERS 
>> b/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
>> index d02584bb1d..7f01f4318e 100644
>> --- a/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
>> +++ b/board/mikrotik/crs3xx-98dx3236/MAINTAINERS
>> @@ -12,3 +12,12 @@ F:    configs/crs305-1g-4s_defconfig
>>   F:    configs/crs305-1g-4s-bit_defconfig
>>   F:    arch/arm/dts/armada-xp-crs305-1g-4s.dts
>>   F:    arch/arm/dts/armada-xp-crs305-1g-4s-bit.dts
>> +
>> +CRS326-24G-2S BOARD
>> +M:    Luka Kovacic <luka.kovacic at sartura.hr>
>> +M:    Luka Perkov <luka.perkov at sartura.hr>
>> +S:    Maintained
>> +F:    configs/crs326-24g-2s_defconfig
>> +F:    configs/crs326-24g-2s-bit_defconfig
>> +F:    arch/arm/dts/armada-xp-crs326-24g-2s.dts
>> +F:    arch/arm/dts/armada-xp-crs326-24g-2s-bit.dts
>> diff --git a/configs/crs326-24g-2s-bit_defconfig 
>> b/configs/crs326-24g-2s-bit_defconfig
>> new file mode 100644
>> index 0000000000..18f2d34453
>> --- /dev/null
>> +++ b/configs/crs326-24g-2s-bit_defconfig
>> @@ -0,0 +1,54 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_CPU_INIT=y
>> +CONFIG_ARCH_MVEBU=y
>> +CONFIG_SYS_TEXT_BASE=0x00800000
>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>> +CONFIG_TARGET_CRS3XX_98DX3236=y
>> +CONFIG_ENV_SIZE=0x10000
>> +CONFIG_ENV_SECT_SIZE=0x10000
>> +CONFIG_ENV_OFFSET=0x1F0000
>> +CONFIG_BOOTCOUNT_BOOTLIMIT=3
>> +# CONFIG_EFI_LOADER is not set
>> +CONFIG_BUILD_TARGET="u-boot.kwb"
>> +CONFIG_USE_PREBOOT=y
>> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
>> +CONFIG_HUSH_PARSER=y
>> +CONFIG_AUTOBOOT_KEYED=y
>> +CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
>> +CONFIG_AUTOBOOT_STOP_STR="s"
>> +CONFIG_AUTOBOOT_KEYED_CTRLC=y
>> +CONFIG_CMD_BOOTZ=y
>> +# CONFIG_CMD_FLASH is not set
>> +# CONFIG_CMD_I2C is not set
>> +CONFIG_CMD_SPI=y
>> +CONFIG_CMD_CACHE=y
>> +CONFIG_CMD_UBI=y
>> +CONFIG_CMD_FS_GENERIC=y
>> +CONFIG_CMD_MTD=y
>> +CONFIG_CMD_MTDPARTS=y
>> +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s-bit"
>> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>> +CONFIG_BLK=y
>> +CONFIG_BOOTCOUNT_LIMIT=y
>> +CONFIG_BOOTCOUNT_ENV=y
>> +# CONFIG_DM_I2C is not set
>> +# CONFIG_SYS_I2C_MVTWSI is not set
>> +# CONFIG_MMC is not set
>> +CONFIG_MTD=y
>> +CONFIG_MTD_PARTITIONS=y
>> +CONFIG_DM_MTD=y
>> +CONFIG_DM_SPI_FLASH=y
>> +CONFIG_SPI_FLASH_MTD=y
>> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
>> +CONFIG_SPI_FLASH_BAR=y
>> +CONFIG_SPI_FLASH_MACRONIX=y
>> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
>> +CONFIG_FIT=y
>> +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
>> +CONFIG_FIT_VERBOSE=y
>> +CONFIG_FIT_BEST_MATCH=y
>> +CONFIG_PCI=y
>> +CONFIG_PCI_MVEBU=y
>> +CONFIG_SYS_NS16550=y
>> +CONFIG_KIRKWOOD_SPI=y
>> diff --git a/configs/crs326-24g-2s_defconfig 
>> b/configs/crs326-24g-2s_defconfig
>> new file mode 100644
>> index 0000000000..fec7922f4c
>> --- /dev/null
>> +++ b/configs/crs326-24g-2s_defconfig
>> @@ -0,0 +1,54 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_CPU_INIT=y
>> +CONFIG_ARCH_MVEBU=y
>> +CONFIG_SYS_TEXT_BASE=0x00800000
>> +CONFIG_SYS_MALLOC_F_LEN=0x2000
>> +CONFIG_TARGET_CRS3XX_98DX3236=y
>> +CONFIG_ENV_SIZE=0x10000
>> +CONFIG_ENV_SECT_SIZE=0x10000
>> +CONFIG_ENV_OFFSET=0x1F0000
>> +CONFIG_BOOTCOUNT_BOOTLIMIT=3
>> +# CONFIG_EFI_LOADER is not set
>> +CONFIG_BUILD_TARGET="u-boot.kwb"
>> +CONFIG_USE_PREBOOT=y
>> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
>> +CONFIG_HUSH_PARSER=y
>> +CONFIG_AUTOBOOT_KEYED=y
>> +CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
>> +CONFIG_AUTOBOOT_STOP_STR="s"
>> +CONFIG_AUTOBOOT_KEYED_CTRLC=y
>> +CONFIG_CMD_BOOTZ=y
>> +# CONFIG_CMD_FLASH is not set
>> +# CONFIG_CMD_I2C is not set
>> +CONFIG_CMD_SPI=y
>> +CONFIG_CMD_CACHE=y
>> +CONFIG_CMD_UBI=y
>> +CONFIG_CMD_FS_GENERIC=y
>> +CONFIG_CMD_MTD=y
>> +CONFIG_CMD_MTDPARTS=y
>> +CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s"
>> +CONFIG_ENV_IS_IN_SPI_FLASH=y
>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>> +CONFIG_BLK=y
>> +CONFIG_BOOTCOUNT_LIMIT=y
>> +CONFIG_BOOTCOUNT_ENV=y
>> +# CONFIG_DM_I2C is not set
>> +# CONFIG_SYS_I2C_MVTWSI is not set
>> +# CONFIG_MMC is not set
>> +CONFIG_MTD=y
>> +CONFIG_MTD_PARTITIONS=y
>> +CONFIG_DM_MTD=y
>> +CONFIG_DM_SPI_FLASH=y
>> +CONFIG_SPI_FLASH_MTD=y
>> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
>> +CONFIG_SPI_FLASH_BAR=y
>> +CONFIG_SPI_FLASH_WINBOND=y
>> +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
>> +CONFIG_FIT=y
>> +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
>> +CONFIG_FIT_VERBOSE=y
>> +CONFIG_FIT_BEST_MATCH=y
>> +CONFIG_PCI=y
>> +CONFIG_PCI_MVEBU=y
>> +CONFIG_SYS_NS16550=y
>> +CONFIG_KIRKWOOD_SPI=y
>>
> 
> 
> Viele Grüße,
> Stefan
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list