[PATCH v5 16/17] test/py: add a test for uefi firmware update capsule of FIT image
Heinrich Schuchardt
xypron.glpk at gmx.de
Mon Aug 31 13:44:44 CEST 2020
On 03.08.20 07:43, AKASHI Takahiro wrote:
> The test can run on sandbox build and it attempts to execute a firmware
> update via a capsule-on-disk, using a FIT image capsule,
> CONFIG_EFI_CAPSULE_FIT.
>
> To run this test successfully, you need configure U-Boot specifically;
> See test_capsule_firmware.py for requirements, and hence it won't run
> on Travis CI.
>
> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> ---
> test/py/tests/test_efi_capsule/conftest.py | 69 +++++++
> test/py/tests/test_efi_capsule/defs.py | 12 ++
> .../test_efi_capsule/test_capsule_firmware.py | 178 ++++++++++++++++++
> .../tests/test_efi_capsule/uboot_bin_env.its | 36 ++++
> 4 files changed, 295 insertions(+)
> create mode 100644 test/py/tests/test_efi_capsule/conftest.py
> create mode 100644 test/py/tests/test_efi_capsule/defs.py
> create mode 100644 test/py/tests/test_efi_capsule/test_capsule_firmware.py
> create mode 100644 test/py/tests/test_efi_capsule/uboot_bin_env.its
>
> diff --git a/test/py/tests/test_efi_capsule/conftest.py b/test/py/tests/test_efi_capsule/conftest.py
> new file mode 100644
> index 000000000000..4e7c36f04ba5
> --- /dev/null
> +++ b/test/py/tests/test_efi_capsule/conftest.py
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +# Copyright (c) 2020, Linaro Limited
> +# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
> +
> +import os
> +import os.path
> +import re
> +from subprocess import call, check_call, check_output, CalledProcessError
> +import pytest
> +from defs import *
> +
> +#
> +# Fixture for UEFI secure boot test
> +#
> +
> +
> + at pytest.fixture(scope='session')
> +def efi_capsule_data(request, u_boot_config):
> + """Set up a file system to be used in UEFI capsule test.
> +
> + Args:
> + request: Pytest request object.
> + u_boot_config: U-boot configuration.
> +
> + Return:
> + A path to disk image to be used for testing
> + """
> + mnt_point = u_boot_config.persistent_data_dir + '/test_efi_capsule'
> + data_dir = mnt_point + CAPSULE_DATA_DIR
> + install_dir = mnt_point + CAPSULE_INSTALL_DIR
> + image_path = u_boot_config.persistent_data_dir + '/test_efi_capsule.img'
> +
> + try:
> + # Create a target device
> + check_call('dd if=/dev/zero of=./spi.bin bs=1MiB count=16', shell=True)
> +
> + check_call('rm -rf %s' % mnt_point, shell=True)
> + check_call('mkdir -p %s' % data_dir, shell=True)
> + check_call('mkdir -p %s' % install_dir, shell=True)
> +
> + # Create capsule files
> + # two regions: one for u-boot.bin and the other for u-boot.env
> + check_call('cd %s; echo -n u-boot:Old > u-boot.bin.old; echo -n u-boot:New > u-boot.bin.new; echo -n u-boot-env:Old -> u-boot.env.old; echo -n u-boot-env:New > u-boot.env.new' % data_dir,
> + shell=True)
> + check_call('sed -e \"s?BINFILE1?u-boot.bin.new?\" -e \"s?BINFILE2?u-boot.env.new?\" %s/test/py/tests/test_efi_capsule/uboot_bin_env.its > %s/uboot_bin_env.its' %
> + (u_boot_config.source_dir, data_dir),
> + shell=True)
> + check_call('cd %s; %s/tools/mkimage -f uboot_bin_env.its uboot_bin_env.itb' %
> + (data_dir, u_boot_config.build_dir),
> + shell=True)
> + check_call('cd %s; %s/tools/mkeficapsule --fit uboot_bin_env.itb --version 1 --index 1 Test01' %
> + (data_dir, u_boot_config.build_dir),
> + shell=True)
> +
> + # Create a disk image with EFI system partition
> + check_call('virt-make-fs --partition=gpt --size=+1M --type=vfat %s %s' %
> + (mnt_point, image_path), shell=True)
> + check_call('sgdisk %s -A 1:set:0 -t 1:C12A7328-F81F-11D2-BA4B-00A0C93EC93B' %
> + image_path, shell=True)
> +
> + except CalledProcessError as exception:
> + pytest.skip('Setup failed: %s' % exception.cmd)
> + return
> + else:
> + yield image_path
> + finally:
> + call('rm -rf %s' % mnt_point, shell=True)
> + call('rm -f %s' % image_path, shell=True)
> + call('rm -f ./spi.bin', shell=True)
> diff --git a/test/py/tests/test_efi_capsule/defs.py b/test/py/tests/test_efi_capsule/defs.py
> new file mode 100644
> index 000000000000..2c5b0ee49beb
> --- /dev/null
> +++ b/test/py/tests/test_efi_capsule/defs.py
> @@ -0,0 +1,12 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +
> +# Size in MiB
> +EFI_BOOTDEV_IMAGE_SIZE = 16
> +EFI_BOOTDEV_PART_SIZE = 8
> +
> +# Owner guid
> +GUID = '11111111-2222-3333-4444-123456789abc'
> +
> +# Directories
> +CAPSULE_DATA_DIR = '/EFI/CapsuleTestData'
> +CAPSULE_INSTALL_DIR = '/EFI/UpdateCapsule'
> diff --git a/test/py/tests/test_efi_capsule/test_capsule_firmware.py b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> new file mode 100644
> index 000000000000..1673a4877778
> --- /dev/null
> +++ b/test/py/tests/test_efi_capsule/test_capsule_firmware.py
> @@ -0,0 +1,178 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +# Copyright (c) 2020, Linaro Limited
> +# Author: AKASHI Takahiro <takahiro.akashi at linaro.org>
> +#
> +# U-Boot UEFI: Firmware Update Test
> +
> +"""
> +This test verifies capsule-on-disk firmware update
> +"""
> +
> +from subprocess import check_call, check_output, CalledProcessError
> +import pytest
> +from defs import *
> +
> +
> + at pytest.mark.boardspec('sandbox')
> + at pytest.mark.buildconfigspec('efi_capsule_firmware_fit')
> + at pytest.mark.buildconfigspec('efi_capsule_on_disk')
> + at pytest.mark.buildconfigspec('dfu')
> + at pytest.mark.buildconfigspec('dfu_sf')
> + at pytest.mark.buildconfigspec('cmd_efidebug')
> + at pytest.mark.buildconfigspec('cmd_fat')
> + at pytest.mark.buildconfigspec('cmd_memory')
> + at pytest.mark.buildconfigspec('cmd_nvedit_efi')
> + at pytest.mark.buildconfigspec('cmd_sf')
> + at pytest.mark.slow
> +class TestEfiCapsuleFirmwareFit(object):
> + def test_efi_capsule_fw1(
> + self, u_boot_config, u_boot_console, efi_capsule_data):
> + """
> + Test Case 1 - Update U-Boot and U-Boot environment on SPI Flash
> + but with OsIndications unset
> + No update should happen
> + 0x100000-0x150000: U-Boot binary (but dummy)
> + 0x150000-0x200000: U-Boot environment (but dummy)
> + """
> + # "-T" (or "-D") is required to enable spi flash on sandbox
> + u_boot_console.restart_uboot_with_flags('-T')
> +
> + disk_img = efi_capsule_data
> + with u_boot_console.log.section('Test Case 1-a, before reboot'):
> + output = u_boot_console.run_command_list([
> + 'host bind 0 %s' % disk_img,
> + 'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
> + 'efidebug boot order 1',
> + 'env set -e OsIndications',
> + 'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',
This results in a warning:
DeprecationWarning: invalid escape sequence \;
The test is never executed on Gitlab:
https://gitlab.denx.de/u-boot/custodians/u-boot-efi/-/jobs/144884
test/py/tests/test_efi_capsule/test_capsule_firmware.py sss
> + 'env save'])
> +
> + # initialize contents
> + output = u_boot_console.run_command_list([
> + 'sf probe 0:0',
> + 'fatload host 0:1 4000000 %s/u-boot.bin.old' % CAPSULE_DATA_DIR,
> + 'sf write 4000000 100000 10',
> + 'sf read 5000000 100000 10',
> + 'md.b 5000000 10'])
> + assert 'Old' in ''.join(output)
> + output = u_boot_console.run_command_list([
> + 'sf probe 0:0',
> + 'fatload host 0:1 4000000 %s/u-boot.env.old' % CAPSULE_DATA_DIR,
> + 'sf write 4000000 150000 10',
> + 'sf read 5000000 150000 10',
> + 'md.b 5000000 10'])
> + assert 'Old' in ''.join(output)
> +
> + # place a capsule file
> + output = u_boot_console.run_command_list([
> + 'fatload host 0:1 4000000 %s/Test01' % CAPSULE_DATA_DIR,
> + 'fatwrite host 0:1 4000000 %s/Test01 $filesize' % CAPSULE_INSTALL_DIR,
> + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> + assert 'Test01' in ''.join(output)
> +
> + # reboot
> + u_boot_console.restart_uboot_with_flags('-T')
> +
> + capsule_early = u_boot_config.buildconfig.get(
> + 'config_efi_capsule_on_disk_early')
> + with u_boot_console.log.section('Test Case 1-b, after reboot'):
> + if not capsule_early:
> + output = u_boot_console.run_command_list([
> + 'host bind 0 %s' % disk_img,
> + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> + assert 'Test01' in ''.join(output)
> +
> + # need to run uefi command to initiate capsule handling
> + output = u_boot_console.run_command(
> + 'env print -e -all Capsule0000')
> +
> + output = u_boot_console.run_command_list([
> + 'host bind 0 %s' % disk_img,
> + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> + assert 'Test01' in ''.join(output)
> +
> + output = u_boot_console.run_command_list([
> + 'sf probe 0:0',
> + 'sf read 4000000 100000 10',
> + 'md.b 4000000 10'])
> + assert 'u-boot:Old' in ''.join(output)
> +
> + output = u_boot_console.run_command_list([
> + 'sf read 4000000 150000 10',
> + 'md.b 4000000 10'])
> + assert 'u-boot-env:Old' in ''.join(output)
> +
> + def test_efi_capsule_fw2(
> + self, u_boot_config, u_boot_console, efi_capsule_data):
> + """
> + Test Case 2 - Update U-Boot and U-Boot environment on SPI Flash
> + 0x100000-0x150000: U-Boot binary (but dummy)
> + 0x150000-0x200000: U-Boot environment (but dummy)
> + """
> + # "-T" (or "-D") is required to enable spi flash on sandbox
> + u_boot_console.restart_uboot_with_flags('-T')
> +
> + disk_img = efi_capsule_data
> + with u_boot_console.log.section('Test Case 2-a, before reboot'):
> + output = u_boot_console.run_command_list([
> + 'host bind 0 %s' % disk_img,
> + 'efidebug boot add 1 TEST host 0:1 /helloworld.efi ""',
> + 'efidebug boot order 1',
> + 'env set -e -nv -bs -rt OsIndications =0x0000000000000004',
> + 'env set dfu_alt_info sf 0:0=u-boot-bin raw 0x100000 0x50000\;u-boot-env raw 0x150000 0x200000',
Invalid escape sequence \;
Best regards
Heinrich
> + 'env save'])
> +
> + # initialize contents
> + output = u_boot_console.run_command_list([
> + 'sf probe 0:0',
> + 'fatload host 0:1 4000000 %s/u-boot.bin.old' % CAPSULE_DATA_DIR,
> + 'sf write 4000000 100000 10',
> + 'sf read 5000000 100000 10',
> + 'md.b 5000000 10'])
> + assert 'Old' in ''.join(output)
> + output = u_boot_console.run_command_list([
> + 'sf probe 0:0',
> + 'fatload host 0:1 4000000 %s/u-boot.env.old' % CAPSULE_DATA_DIR,
> + 'sf write 4000000 150000 10',
> + 'sf read 5000000 150000 10',
> + 'md.b 5000000 10'])
> + assert 'Old' in ''.join(output)
> +
> + # place a capsule file
> + output = u_boot_console.run_command_list([
> + 'fatload host 0:1 4000000 %s/Test01' % CAPSULE_DATA_DIR,
> + 'fatwrite host 0:1 4000000 %s/Test01 $filesize' % CAPSULE_INSTALL_DIR,
> + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> + assert 'Test01' in ''.join(output)
> +
> + # reboot
> + u_boot_console.restart_uboot_with_flags('-T')
> +
> + capsule_early = u_boot_config.buildconfig.get(
> + 'config_efi_capsule_on_disk_early')
> + with u_boot_console.log.section('Test Case 2-b, after reboot'):
> + if not capsule_early:
> + output = u_boot_console.run_command_list([
> + 'host bind 0 %s' % disk_img,
> + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> + assert 'Test01' in ''.join(output)
> +
> + # need to run uefi command to initiate capsule handling
> + output = u_boot_console.run_command(
> + 'env print -e -all Capsule0000')
> +
> + output = u_boot_console.run_command_list([
> + 'host bind 0 %s' % disk_img,
> + 'fatls host 0:1 %s' % CAPSULE_INSTALL_DIR])
> + assert 'Test01' not in ''.join(output)
> +
> + output = u_boot_console.run_command_list([
> + 'sf probe 0:0',
> + 'sf read 4000000 100000 10',
> + 'md.b 4000000 10'])
> + assert 'u-boot:New' in ''.join(output)
> +
> + output = u_boot_console.run_command_list([
> + 'sf read 4000000 150000 10',
> + 'md.b 4000000 10'])
> + assert 'u-boot-env:New' in ''.join(output)
> diff --git a/test/py/tests/test_efi_capsule/uboot_bin_env.its b/test/py/tests/test_efi_capsule/uboot_bin_env.its
> new file mode 100644
> index 000000000000..31e2f8049f9a
> --- /dev/null
> +++ b/test/py/tests/test_efi_capsule/uboot_bin_env.its
> @@ -0,0 +1,36 @@
> +/*
> + * Automatic software update for U-Boot
> + * Make sure the flashing addresses ('load' prop) is correct for your board!
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + description = "Automatic U-Boot environment update";
> + #address-cells = <2>;
> +
> + images {
> + u-boot-bin at 100000 {
> + description = "U-Boot binary on SPI Flash";
> + data = /incbin/("BINFILE1");
> + compression = "none";
> + type = "firmware";
> + arch = "sandbox";
> + load = <0>;
> + hash-1 {
> + algo = "sha1";
> + };
> + };
> + u-boot-env at 150000 {
> + description = "U-Boot environment on SPI Flash";
> + data = /incbin/("BINFILE2");
> + compression = "none";
> + type = "firmware";
> + arch = "sandbox";
> + load = <0>;
> + hash-1 {
> + algo = "sha1";
> + };
> + };
> + };
> +};
>
More information about the U-Boot
mailing list