[PATCH 07/11] memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver

Patrice CHOTARD patrice.chotard at st.com
Thu Aug 13 11:58:30 CEST 2020


On 8/13/20 9:31 AM, Patrice CHOTARD wrote:
> Hi Christophe
>
> On 7/31/20 9:53 AM, Christophe Kerello wrote:
>> The driver adds the support for the STMicroelectronics FMC2 EBI controller
>> found on STM32MP SOCs.
>>
>> Signed-off-by: Christophe Kerello <christophe.kerello at st.com>
>> ---
>>
>>  drivers/memory/Kconfig          |    9 +
>>  drivers/memory/Makefile         |    1 +
>>  drivers/memory/stm32-fmc2-ebi.c | 1056 +++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 1066 insertions(+)
>>  create mode 100644 drivers/memory/stm32-fmc2-ebi.c

Applied on u-boot-stm/master

Thanks

>>
>> diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
>> index 4fbb5aa..7271892 100644
>> --- a/drivers/memory/Kconfig
>> +++ b/drivers/memory/Kconfig
>> @@ -4,6 +4,15 @@
>>  
>>  menu "Memory Controller drivers"
>>  
>> +config STM32_FMC2_EBI
>> +	bool "Support for FMC2 External Bus Interface on STM32MP SoCs"
>> +	depends on ARCH_STM32MP
>> +	help
>> +	  Select this option to enable the STM32 FMC2 External Bus Interface
>> +	  controller. This driver configures the transactions with external
>> +	  devices (like SRAM, ethernet adapters, FPGAs, LCD displays, ...) on
>> +	  SOCs containing the FMC2 External Bus Interface.
>> +
>>  config TI_AEMIF
>>  	tristate "Texas Instruments AEMIF driver"
>>  	depends on ARCH_KEYSTONE
>> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
>> index 238add0..fec52ef 100644
>> --- a/drivers/memory/Makefile
>> +++ b/drivers/memory/Makefile
>> @@ -1,2 +1,3 @@
>>  
>> +obj-$(CONFIG_STM32_FMC2_EBI) += stm32-fmc2-ebi.o
>>  obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
>> diff --git a/drivers/memory/stm32-fmc2-ebi.c b/drivers/memory/stm32-fmc2-ebi.c
>> new file mode 100644
>> index 0000000..d887a1e
>> --- /dev/null
>> +++ b/drivers/memory/stm32-fmc2-ebi.c
>> @@ -0,0 +1,1056 @@
>> +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
>> +/*
>> + * Copyright (C) STMicroelectronics 2020
>> + */
>> +
>> +#include <common.h>
>> +#include <clk.h>
>> +#include <dm.h>
>> +#include <reset.h>
>> +#include <linux/bitfield.h>
>> +#include <linux/err.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/ioport.h>
>> +
>> +/* FMC2 Controller Registers */
>> +#define FMC2_BCR1			0x0
>> +#define FMC2_BTR1			0x4
>> +#define FMC2_BCR(x)			((x) * 0x8 + FMC2_BCR1)
>> +#define FMC2_BTR(x)			((x) * 0x8 + FMC2_BTR1)
>> +#define FMC2_PCSCNTR			0x20
>> +#define FMC2_BWTR1			0x104
>> +#define FMC2_BWTR(x)			((x) * 0x8 + FMC2_BWTR1)
>> +
>> +/* Register: FMC2_BCR1 */
>> +#define FMC2_BCR1_CCLKEN		BIT(20)
>> +#define FMC2_BCR1_FMC2EN		BIT(31)
>> +
>> +/* Register: FMC2_BCRx */
>> +#define FMC2_BCR_MBKEN			BIT(0)
>> +#define FMC2_BCR_MUXEN			BIT(1)
>> +#define FMC2_BCR_MTYP			GENMASK(3, 2)
>> +#define FMC2_BCR_MWID			GENMASK(5, 4)
>> +#define FMC2_BCR_FACCEN			BIT(6)
>> +#define FMC2_BCR_BURSTEN		BIT(8)
>> +#define FMC2_BCR_WAITPOL		BIT(9)
>> +#define FMC2_BCR_WAITCFG		BIT(11)
>> +#define FMC2_BCR_WREN			BIT(12)
>> +#define FMC2_BCR_WAITEN			BIT(13)
>> +#define FMC2_BCR_EXTMOD			BIT(14)
>> +#define FMC2_BCR_ASYNCWAIT		BIT(15)
>> +#define FMC2_BCR_CPSIZE			GENMASK(18, 16)
>> +#define FMC2_BCR_CBURSTRW		BIT(19)
>> +#define FMC2_BCR_NBLSET			GENMASK(23, 22)
>> +
>> +/* Register: FMC2_BTRx/FMC2_BWTRx */
>> +#define FMC2_BXTR_ADDSET		GENMASK(3, 0)
>> +#define FMC2_BXTR_ADDHLD		GENMASK(7, 4)
>> +#define FMC2_BXTR_DATAST		GENMASK(15, 8)
>> +#define FMC2_BXTR_BUSTURN		GENMASK(19, 16)
>> +#define FMC2_BTR_CLKDIV			GENMASK(23, 20)
>> +#define FMC2_BTR_DATLAT			GENMASK(27, 24)
>> +#define FMC2_BXTR_ACCMOD		GENMASK(29, 28)
>> +#define FMC2_BXTR_DATAHLD		GENMASK(31, 30)
>> +
>> +/* Register: FMC2_PCSCNTR */
>> +#define FMC2_PCSCNTR_CSCOUNT		GENMASK(15, 0)
>> +#define FMC2_PCSCNTR_CNTBEN(x)		BIT((x) + 16)
>> +
>> +#define FMC2_MAX_EBI_CE			4
>> +#define FMC2_MAX_BANKS			5
>> +
>> +#define FMC2_BCR_CPSIZE_0		0x0
>> +#define FMC2_BCR_CPSIZE_128		0x1
>> +#define FMC2_BCR_CPSIZE_256		0x2
>> +#define FMC2_BCR_CPSIZE_512		0x3
>> +#define FMC2_BCR_CPSIZE_1024		0x4
>> +
>> +#define FMC2_BCR_MWID_8			0x0
>> +#define FMC2_BCR_MWID_16		0x1
>> +
>> +#define FMC2_BCR_MTYP_SRAM		0x0
>> +#define FMC2_BCR_MTYP_PSRAM		0x1
>> +#define FMC2_BCR_MTYP_NOR		0x2
>> +
>> +#define FMC2_BXTR_EXTMOD_A		0x0
>> +#define FMC2_BXTR_EXTMOD_B		0x1
>> +#define FMC2_BXTR_EXTMOD_C		0x2
>> +#define FMC2_BXTR_EXTMOD_D		0x3
>> +
>> +#define FMC2_BCR_NBLSET_MAX		0x3
>> +#define FMC2_BXTR_ADDSET_MAX		0xf
>> +#define FMC2_BXTR_ADDHLD_MAX		0xf
>> +#define FMC2_BXTR_DATAST_MAX		0xff
>> +#define FMC2_BXTR_BUSTURN_MAX		0xf
>> +#define FMC2_BXTR_DATAHLD_MAX		0x3
>> +#define FMC2_BTR_CLKDIV_MAX		0xf
>> +#define FMC2_BTR_DATLAT_MAX		0xf
>> +#define FMC2_PCSCNTR_CSCOUNT_MAX	0xff
>> +
>> +#define FMC2_NSEC_PER_SEC		1000000000L
>> +
>> +enum stm32_fmc2_ebi_bank {
>> +	FMC2_EBI1 = 0,
>> +	FMC2_EBI2,
>> +	FMC2_EBI3,
>> +	FMC2_EBI4,
>> +	FMC2_NAND
>> +};
>> +
>> +enum stm32_fmc2_ebi_register_type {
>> +	FMC2_REG_BCR = 1,
>> +	FMC2_REG_BTR,
>> +	FMC2_REG_BWTR,
>> +	FMC2_REG_PCSCNTR
>> +};
>> +
>> +enum stm32_fmc2_ebi_transaction_type {
>> +	FMC2_ASYNC_MODE_1_SRAM = 0,
>> +	FMC2_ASYNC_MODE_1_PSRAM,
>> +	FMC2_ASYNC_MODE_A_SRAM,
>> +	FMC2_ASYNC_MODE_A_PSRAM,
>> +	FMC2_ASYNC_MODE_2_NOR,
>> +	FMC2_ASYNC_MODE_B_NOR,
>> +	FMC2_ASYNC_MODE_C_NOR,
>> +	FMC2_ASYNC_MODE_D_NOR,
>> +	FMC2_SYNC_READ_SYNC_WRITE_PSRAM,
>> +	FMC2_SYNC_READ_ASYNC_WRITE_PSRAM,
>> +	FMC2_SYNC_READ_SYNC_WRITE_NOR,
>> +	FMC2_SYNC_READ_ASYNC_WRITE_NOR
>> +};
>> +
>> +enum stm32_fmc2_ebi_buswidth {
>> +	FMC2_BUSWIDTH_8 = 8,
>> +	FMC2_BUSWIDTH_16 = 16
>> +};
>> +
>> +enum stm32_fmc2_ebi_cpsize {
>> +	FMC2_CPSIZE_0 = 0,
>> +	FMC2_CPSIZE_128 = 128,
>> +	FMC2_CPSIZE_256 = 256,
>> +	FMC2_CPSIZE_512 = 512,
>> +	FMC2_CPSIZE_1024 = 1024
>> +};
>> +
>> +struct stm32_fmc2_ebi {
>> +	struct clk clk;
>> +	fdt_addr_t io_base;
>> +	u8 bank_assigned;
>> +};
>> +
>> +/*
>> + * struct stm32_fmc2_prop - STM32 FMC2 EBI property
>> + * @name: the device tree binding name of the property
>> + * @bprop: indicate that it is a boolean property
>> + * @mprop: indicate that it is a mandatory property
>> + * @reg_type: the register that have to be modified
>> + * @reg_mask: the bit that have to be modified in the selected register
>> + *            in case of it is a boolean property
>> + * @reset_val: the default value that have to be set in case the property
>> + *             has not been defined in the device tree
>> + * @check: this callback ckecks that the property is compliant with the
>> + *         transaction type selected
>> + * @calculate: this callback is called to calculate for exemple a timing
>> + *             set in nanoseconds in the device tree in clock cycles or in
>> + *             clock period
>> + * @set: this callback applies the values in the registers
>> + */
>> +struct stm32_fmc2_prop {
>> +	const char *name;
>> +	bool bprop;
>> +	bool mprop;
>> +	int reg_type;
>> +	u32 reg_mask;
>> +	u32 reset_val;
>> +	int (*check)(struct stm32_fmc2_ebi *ebi,
>> +		     const struct stm32_fmc2_prop *prop, int cs);
>> +	u32 (*calculate)(struct stm32_fmc2_ebi *ebi, int cs, u32 setup);
>> +	int (*set)(struct stm32_fmc2_ebi *ebi,
>> +		   const struct stm32_fmc2_prop *prop,
>> +		   int cs, u32 setup);
>> +};
>> +
>> +static int stm32_fmc2_ebi_check_mux(struct stm32_fmc2_ebi *ebi,
>> +				    const struct stm32_fmc2_prop *prop,
>> +				    int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +
>> +	if (bcr & FMC2_BCR_MTYP)
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_waitcfg(struct stm32_fmc2_ebi *ebi,
>> +					const struct stm32_fmc2_prop *prop,
>> +					int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +	u32 val = FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +
>> +	if ((bcr & FMC2_BCR_MTYP) == val && bcr & FMC2_BCR_BURSTEN)
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_sync_trans(struct stm32_fmc2_ebi *ebi,
>> +					   const struct stm32_fmc2_prop *prop,
>> +					   int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +
>> +	if (bcr & FMC2_BCR_BURSTEN)
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_async_trans(struct stm32_fmc2_ebi *ebi,
>> +					    const struct stm32_fmc2_prop *prop,
>> +					    int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +
>> +	if (!(bcr & FMC2_BCR_BURSTEN) || !(bcr & FMC2_BCR_CBURSTRW))
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_cpsize(struct stm32_fmc2_ebi *ebi,
>> +				       const struct stm32_fmc2_prop *prop,
>> +				       int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +	u32 val = FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
>> +
>> +	if ((bcr & FMC2_BCR_MTYP) == val && bcr & FMC2_BCR_BURSTEN)
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_address_hold(struct stm32_fmc2_ebi *ebi,
>> +					     const struct stm32_fmc2_prop *prop,
>> +					     int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +	u32 bxtr = prop->reg_type == FMC2_REG_BWTR ?
>> +		   readl(ebi->io_base + FMC2_BWTR(cs)) :
>> +		   readl(ebi->io_base + FMC2_BTR(cs));
>> +	u32 val = FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
>> +
>> +	if ((!(bcr & FMC2_BCR_BURSTEN) || !(bcr & FMC2_BCR_CBURSTRW)) &&
>> +	    ((bxtr & FMC2_BXTR_ACCMOD) == val || bcr & FMC2_BCR_MUXEN))
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_clk_period(struct stm32_fmc2_ebi *ebi,
>> +					   const struct stm32_fmc2_prop *prop,
>> +					   int cs)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +	u32 bcr1 = cs ? readl(ebi->io_base + FMC2_BCR1) : bcr;
>> +
>> +	if (bcr & FMC2_BCR_BURSTEN && (!cs || !(bcr1 & FMC2_BCR1_CCLKEN)))
>> +		return 0;
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int stm32_fmc2_ebi_check_cclk(struct stm32_fmc2_ebi *ebi,
>> +				     const struct stm32_fmc2_prop *prop,
>> +				     int cs)
>> +{
>> +	if (cs)
>> +		return -EINVAL;
>> +
>> +	return stm32_fmc2_ebi_check_sync_trans(ebi, prop, cs);
>> +}
>> +
>> +static u32 stm32_fmc2_ebi_ns_to_clock_cycles(struct stm32_fmc2_ebi *ebi,
>> +					     int cs, u32 setup)
>> +{
>> +	unsigned long hclk = clk_get_rate(&ebi->clk);
>> +	unsigned long hclkp = FMC2_NSEC_PER_SEC / (hclk / 1000);
>> +
>> +	return DIV_ROUND_UP(setup * 1000, hclkp);
>> +}
>> +
>> +static u32 stm32_fmc2_ebi_ns_to_clk_period(struct stm32_fmc2_ebi *ebi,
>> +					   int cs, u32 setup)
>> +{
>> +	u32 nb_clk_cycles = stm32_fmc2_ebi_ns_to_clock_cycles(ebi, cs, setup);
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR1);
>> +	u32 btr = bcr & FMC2_BCR1_CCLKEN || !cs ?
>> +		  readl(ebi->io_base + FMC2_BTR1) :
>> +		  readl(ebi->io_base + FMC2_BTR(cs));
>> +	u32 clk_period = FIELD_GET(FMC2_BTR_CLKDIV, btr) + 1;
>> +
>> +	return DIV_ROUND_UP(nb_clk_cycles, clk_period);
>> +}
>> +
>> +static int stm32_fmc2_ebi_get_reg(int reg_type, int cs, u32 *reg)
>> +{
>> +	switch (reg_type) {
>> +	case FMC2_REG_BCR:
>> +		*reg = FMC2_BCR(cs);
>> +		break;
>> +	case FMC2_REG_BTR:
>> +		*reg = FMC2_BTR(cs);
>> +		break;
>> +	case FMC2_REG_BWTR:
>> +		*reg = FMC2_BWTR(cs);
>> +		break;
>> +	case FMC2_REG_PCSCNTR:
>> +		*reg = FMC2_PCSCNTR;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_bit_field(struct stm32_fmc2_ebi *ebi,
>> +					const struct stm32_fmc2_prop *prop,
>> +					int cs, u32 setup)
>> +{
>> +	u32 reg;
>> +	int ret;
>> +
>> +	ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	clrsetbits_le32(ebi->io_base + reg, prop->reg_mask,
>> +			setup ? prop->reg_mask : 0);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_trans_type(struct stm32_fmc2_ebi *ebi,
>> +					 const struct stm32_fmc2_prop *prop,
>> +					 int cs, u32 setup)
>> +{
>> +	u32 bcr_mask, bcr = FMC2_BCR_WREN;
>> +	u32 btr_mask, btr = 0;
>> +	u32 bwtr_mask, bwtr = 0;
>> +
>> +	bwtr_mask = FMC2_BXTR_ACCMOD;
>> +	btr_mask = FMC2_BXTR_ACCMOD;
>> +	bcr_mask = FMC2_BCR_MUXEN | FMC2_BCR_MTYP | FMC2_BCR_FACCEN |
>> +		   FMC2_BCR_WREN | FMC2_BCR_WAITEN | FMC2_BCR_BURSTEN |
>> +		   FMC2_BCR_EXTMOD | FMC2_BCR_CBURSTRW;
>> +
>> +	switch (setup) {
>> +	case FMC2_ASYNC_MODE_1_SRAM:
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_SRAM);
>> +		/*
>> +		 * MUXEN = 0, MTYP = 0, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		break;
>> +	case FMC2_ASYNC_MODE_1_PSRAM:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
>> +		break;
>> +	case FMC2_ASYNC_MODE_A_SRAM:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 0, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_SRAM);
>> +		bcr |= FMC2_BCR_EXTMOD;
>> +		btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
>> +		bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
>> +		break;
>> +	case FMC2_ASYNC_MODE_A_PSRAM:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
>> +		bcr |= FMC2_BCR_EXTMOD;
>> +		btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
>> +		bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_A);
>> +		break;
>> +	case FMC2_ASYNC_MODE_2_NOR:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +		bcr |= FMC2_BCR_FACCEN;
>> +		break;
>> +	case FMC2_ASYNC_MODE_B_NOR:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 1
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +		bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
>> +		btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_B);
>> +		bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_B);
>> +		break;
>> +	case FMC2_ASYNC_MODE_C_NOR:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 2
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +		bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
>> +		btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_C);
>> +		bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_C);
>> +		break;
>> +	case FMC2_ASYNC_MODE_D_NOR:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 0, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 1, CBURSTRW = 0, ACCMOD = 3
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +		bcr |= FMC2_BCR_FACCEN | FMC2_BCR_EXTMOD;
>> +		btr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
>> +		bwtr |= FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
>> +		break;
>> +	case FMC2_SYNC_READ_SYNC_WRITE_PSRAM:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 1, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 1, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
>> +		bcr |= FMC2_BCR_BURSTEN | FMC2_BCR_CBURSTRW;
>> +		break;
>> +	case FMC2_SYNC_READ_ASYNC_WRITE_PSRAM:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 1, FACCEN = 0, BURSTEN = 1, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_PSRAM);
>> +		bcr |= FMC2_BCR_BURSTEN;
>> +		break;
>> +	case FMC2_SYNC_READ_SYNC_WRITE_NOR:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 1, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 1, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +		bcr |= FMC2_BCR_FACCEN | FMC2_BCR_BURSTEN | FMC2_BCR_CBURSTRW;
>> +		break;
>> +	case FMC2_SYNC_READ_ASYNC_WRITE_NOR:
>> +		/*
>> +		 * MUXEN = 0, MTYP = 2, FACCEN = 1, BURSTEN = 1, WAITEN = 0,
>> +		 * WREN = 1, EXTMOD = 0, CBURSTRW = 0, ACCMOD = 0
>> +		 */
>> +		bcr |= FIELD_PREP(FMC2_BCR_MTYP, FMC2_BCR_MTYP_NOR);
>> +		bcr |= FMC2_BCR_FACCEN | FMC2_BCR_BURSTEN;
>> +		break;
>> +	default:
>> +		/* Type of transaction not supported */
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (bcr & FMC2_BCR_EXTMOD)
>> +		clrsetbits_le32(ebi->io_base + FMC2_BWTR(cs),
>> +				bwtr_mask, bwtr);
>> +	clrsetbits_le32(ebi->io_base + FMC2_BTR(cs), btr_mask, btr);
>> +	clrsetbits_le32(ebi->io_base + FMC2_BCR(cs), bcr_mask, bcr);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_buswidth(struct stm32_fmc2_ebi *ebi,
>> +				       const struct stm32_fmc2_prop *prop,
>> +				       int cs, u32 setup)
>> +{
>> +	u32 val;
>> +
>> +	switch (setup) {
>> +	case FMC2_BUSWIDTH_8:
>> +		val = FIELD_PREP(FMC2_BCR_MWID, FMC2_BCR_MWID_8);
>> +		break;
>> +	case FMC2_BUSWIDTH_16:
>> +		val = FIELD_PREP(FMC2_BCR_MWID, FMC2_BCR_MWID_16);
>> +		break;
>> +	default:
>> +		/* Buswidth not supported */
>> +		return -EINVAL;
>> +	}
>> +
>> +	clrsetbits_le32(ebi->io_base + FMC2_BCR(cs), FMC2_BCR_MWID, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_cpsize(struct stm32_fmc2_ebi *ebi,
>> +				     const struct stm32_fmc2_prop *prop,
>> +				     int cs, u32 setup)
>> +{
>> +	u32 val;
>> +
>> +	switch (setup) {
>> +	case FMC2_CPSIZE_0:
>> +		val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_0);
>> +		break;
>> +	case FMC2_CPSIZE_128:
>> +		val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_128);
>> +		break;
>> +	case FMC2_CPSIZE_256:
>> +		val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_256);
>> +		break;
>> +	case FMC2_CPSIZE_512:
>> +		val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_512);
>> +		break;
>> +	case FMC2_CPSIZE_1024:
>> +		val = FIELD_PREP(FMC2_BCR_CPSIZE, FMC2_BCR_CPSIZE_1024);
>> +		break;
>> +	default:
>> +		/* Cpsize not supported */
>> +		return -EINVAL;
>> +	}
>> +
>> +	clrsetbits_le32(ebi->io_base + FMC2_BCR(cs), FMC2_BCR_CPSIZE, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_bl_setup(struct stm32_fmc2_ebi *ebi,
>> +				       const struct stm32_fmc2_prop *prop,
>> +				       int cs, u32 setup)
>> +{
>> +	u32 val;
>> +
>> +	val = min_t(u32, setup, FMC2_BCR_NBLSET_MAX);
>> +	val = FIELD_PREP(FMC2_BCR_NBLSET, val);
>> +	clrsetbits_le32(ebi->io_base + FMC2_BCR(cs), FMC2_BCR_NBLSET, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_address_setup(struct stm32_fmc2_ebi *ebi,
>> +					    const struct stm32_fmc2_prop *prop,
>> +					    int cs, u32 setup)
>> +{
>> +	u32 bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +	u32 bxtr = prop->reg_type == FMC2_REG_BWTR ?
>> +		   readl(ebi->io_base + FMC2_BWTR(cs)) :
>> +		   readl(ebi->io_base + FMC2_BTR(cs));
>> +	u32 reg, val = FIELD_PREP(FMC2_BXTR_ACCMOD, FMC2_BXTR_EXTMOD_D);
>> +	int ret;
>> +
>> +	ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if ((bxtr & FMC2_BXTR_ACCMOD) == val || bcr & FMC2_BCR_MUXEN)
>> +		val = clamp_val(setup, 1, FMC2_BXTR_ADDSET_MAX);
>> +	else
>> +		val = min_t(u32, setup, FMC2_BXTR_ADDSET_MAX);
>> +	val = FIELD_PREP(FMC2_BXTR_ADDSET, val);
>> +	clrsetbits_le32(ebi->io_base + reg, FMC2_BXTR_ADDSET, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_address_hold(struct stm32_fmc2_ebi *ebi,
>> +					   const struct stm32_fmc2_prop *prop,
>> +					   int cs, u32 setup)
>> +{
>> +	u32 val, reg;
>> +	int ret;
>> +
>> +	ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	val = clamp_val(setup, 1, FMC2_BXTR_ADDHLD_MAX);
>> +	val = FIELD_PREP(FMC2_BXTR_ADDHLD, val);
>> +	clrsetbits_le32(ebi->io_base + reg, FMC2_BXTR_ADDHLD, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_data_setup(struct stm32_fmc2_ebi *ebi,
>> +					 const struct stm32_fmc2_prop *prop,
>> +					 int cs, u32 setup)
>> +{
>> +	u32 val, reg;
>> +	int ret;
>> +
>> +	ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	val = clamp_val(setup, 1, FMC2_BXTR_DATAST_MAX);
>> +	val = FIELD_PREP(FMC2_BXTR_DATAST, val);
>> +	clrsetbits_le32(ebi->io_base + reg, FMC2_BXTR_DATAST, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_bus_turnaround(struct stm32_fmc2_ebi *ebi,
>> +					     const struct stm32_fmc2_prop *prop,
>> +					     int cs, u32 setup)
>> +{
>> +	u32 val, reg;
>> +	int ret;
>> +
>> +	ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	val = setup ? min_t(u32, setup - 1, FMC2_BXTR_BUSTURN_MAX) : 0;
>> +	val = FIELD_PREP(FMC2_BXTR_BUSTURN, val);
>> +	clrsetbits_le32(ebi->io_base + reg, FMC2_BXTR_BUSTURN, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_data_hold(struct stm32_fmc2_ebi *ebi,
>> +					const struct stm32_fmc2_prop *prop,
>> +					int cs, u32 setup)
>> +{
>> +	u32 val, reg;
>> +	int ret;
>> +
>> +	ret = stm32_fmc2_ebi_get_reg(prop->reg_type, cs, &reg);
>> +	if (ret)
>> +		return ret;
>> +
>> +	if (prop->reg_type == FMC2_REG_BWTR)
>> +		val = setup ? min_t(u32, setup - 1, FMC2_BXTR_DATAHLD_MAX) : 0;
>> +	else
>> +		val = min_t(u32, setup, FMC2_BXTR_DATAHLD_MAX);
>> +	val = FIELD_PREP(FMC2_BXTR_DATAHLD, val);
>> +	clrsetbits_le32(ebi->io_base + reg, FMC2_BXTR_DATAHLD, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_clk_period(struct stm32_fmc2_ebi *ebi,
>> +					 const struct stm32_fmc2_prop *prop,
>> +					 int cs, u32 setup)
>> +{
>> +	u32 val;
>> +
>> +	val = setup ? clamp_val(setup - 1, 1, FMC2_BTR_CLKDIV_MAX) : 1;
>> +	val = FIELD_PREP(FMC2_BTR_CLKDIV, val);
>> +	clrsetbits_le32(ebi->io_base + FMC2_BTR(cs), FMC2_BTR_CLKDIV, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_data_latency(struct stm32_fmc2_ebi *ebi,
>> +					   const struct stm32_fmc2_prop *prop,
>> +					   int cs, u32 setup)
>> +{
>> +	u32 val;
>> +
>> +	val = setup > 1 ? min_t(u32, setup - 2, FMC2_BTR_DATLAT_MAX) : 0;
>> +	val = FIELD_PREP(FMC2_BTR_DATLAT, val);
>> +	clrsetbits_le32(ebi->io_base + FMC2_BTR(cs), FMC2_BTR_DATLAT, val);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_set_max_low_pulse(struct stm32_fmc2_ebi *ebi,
>> +					    const struct stm32_fmc2_prop *prop,
>> +					    int cs, u32 setup)
>> +{
>> +	u32 old_val, new_val, pcscntr;
>> +
>> +	if (setup < 1)
>> +		return 0;
>> +
>> +	pcscntr = readl(ebi->io_base + FMC2_PCSCNTR);
>> +
>> +	/* Enable counter for the bank */
>> +	setbits_le32(ebi->io_base + FMC2_PCSCNTR, FMC2_PCSCNTR_CNTBEN(cs));
>> +
>> +	new_val = min_t(u32, setup - 1, FMC2_PCSCNTR_CSCOUNT_MAX);
>> +	old_val = FIELD_GET(FMC2_PCSCNTR_CSCOUNT, pcscntr);
>> +	if (old_val && new_val > old_val)
>> +		/* Keep current counter value */
>> +		return 0;
>> +
>> +	new_val = FIELD_PREP(FMC2_PCSCNTR_CSCOUNT, new_val);
>> +	clrsetbits_le32(ebi->io_base + FMC2_PCSCNTR,
>> +			FMC2_PCSCNTR_CSCOUNT, new_val);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct stm32_fmc2_prop stm32_fmc2_child_props[] = {
>> +	/* st,fmc2-ebi-cs-trans-type must be the first property */
>> +	{
>> +		.name = "st,fmc2-ebi-cs-transaction-type",
>> +		.mprop = true,
>> +		.set = stm32_fmc2_ebi_set_trans_type,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-cclk-enable",
>> +		.bprop = true,
>> +		.reg_type = FMC2_REG_BCR,
>> +		.reg_mask = FMC2_BCR1_CCLKEN,
>> +		.check = stm32_fmc2_ebi_check_cclk,
>> +		.set = stm32_fmc2_ebi_set_bit_field,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-mux-enable",
>> +		.bprop = true,
>> +		.reg_type = FMC2_REG_BCR,
>> +		.reg_mask = FMC2_BCR_MUXEN,
>> +		.check = stm32_fmc2_ebi_check_mux,
>> +		.set = stm32_fmc2_ebi_set_bit_field,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-buswidth",
>> +		.reset_val = FMC2_BUSWIDTH_16,
>> +		.set = stm32_fmc2_ebi_set_buswidth,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-waitpol-high",
>> +		.bprop = true,
>> +		.reg_type = FMC2_REG_BCR,
>> +		.reg_mask = FMC2_BCR_WAITPOL,
>> +		.set = stm32_fmc2_ebi_set_bit_field,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-waitcfg-enable",
>> +		.bprop = true,
>> +		.reg_type = FMC2_REG_BCR,
>> +		.reg_mask = FMC2_BCR_WAITCFG,
>> +		.check = stm32_fmc2_ebi_check_waitcfg,
>> +		.set = stm32_fmc2_ebi_set_bit_field,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-wait-enable",
>> +		.bprop = true,
>> +		.reg_type = FMC2_REG_BCR,
>> +		.reg_mask = FMC2_BCR_WAITEN,
>> +		.check = stm32_fmc2_ebi_check_sync_trans,
>> +		.set = stm32_fmc2_ebi_set_bit_field,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-asyncwait-enable",
>> +		.bprop = true,
>> +		.reg_type = FMC2_REG_BCR,
>> +		.reg_mask = FMC2_BCR_ASYNCWAIT,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.set = stm32_fmc2_ebi_set_bit_field,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-cpsize",
>> +		.check = stm32_fmc2_ebi_check_cpsize,
>> +		.set = stm32_fmc2_ebi_set_cpsize,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-byte-lane-setup-ns",
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_bl_setup,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-address-setup-ns",
>> +		.reg_type = FMC2_REG_BTR,
>> +		.reset_val = FMC2_BXTR_ADDSET_MAX,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_address_setup,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-address-hold-ns",
>> +		.reg_type = FMC2_REG_BTR,
>> +		.reset_val = FMC2_BXTR_ADDHLD_MAX,
>> +		.check = stm32_fmc2_ebi_check_address_hold,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_address_hold,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-data-setup-ns",
>> +		.reg_type = FMC2_REG_BTR,
>> +		.reset_val = FMC2_BXTR_DATAST_MAX,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_data_setup,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-bus-turnaround-ns",
>> +		.reg_type = FMC2_REG_BTR,
>> +		.reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_bus_turnaround,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-data-hold-ns",
>> +		.reg_type = FMC2_REG_BTR,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_data_hold,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-clk-period-ns",
>> +		.reset_val = FMC2_BTR_CLKDIV_MAX + 1,
>> +		.check = stm32_fmc2_ebi_check_clk_period,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_clk_period,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-data-latency-ns",
>> +		.check = stm32_fmc2_ebi_check_sync_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clk_period,
>> +		.set = stm32_fmc2_ebi_set_data_latency,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-write-address-setup-ns",
>> +		.reg_type = FMC2_REG_BWTR,
>> +		.reset_val = FMC2_BXTR_ADDSET_MAX,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_address_setup,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-write-address-hold-ns",
>> +		.reg_type = FMC2_REG_BWTR,
>> +		.reset_val = FMC2_BXTR_ADDHLD_MAX,
>> +		.check = stm32_fmc2_ebi_check_address_hold,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_address_hold,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-write-data-setup-ns",
>> +		.reg_type = FMC2_REG_BWTR,
>> +		.reset_val = FMC2_BXTR_DATAST_MAX,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_data_setup,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-write-bus-turnaround-ns",
>> +		.reg_type = FMC2_REG_BWTR,
>> +		.reset_val = FMC2_BXTR_BUSTURN_MAX + 1,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_bus_turnaround,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-write-data-hold-ns",
>> +		.reg_type = FMC2_REG_BWTR,
>> +		.check = stm32_fmc2_ebi_check_async_trans,
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_data_hold,
>> +	},
>> +	{
>> +		.name = "st,fmc2-ebi-cs-max-low-pulse-ns",
>> +		.calculate = stm32_fmc2_ebi_ns_to_clock_cycles,
>> +		.set = stm32_fmc2_ebi_set_max_low_pulse,
>> +	},
>> +};
>> +
>> +static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi,
>> +				     ofnode node,
>> +				     const struct stm32_fmc2_prop *prop,
>> +				     int cs)
>> +{
>> +	u32 setup = 0;
>> +
>> +	if (!prop->set) {
>> +		pr_err("property %s is not well defined\n", prop->name);
>> +		return -EINVAL;
>> +	}
>> +
>> +	if (prop->check && prop->check(ebi, prop, cs))
>> +		/* Skip this property */
>> +		return 0;
>> +
>> +	if (prop->bprop) {
>> +		bool bprop;
>> +
>> +		bprop = ofnode_read_bool(node, prop->name);
>> +		if (prop->mprop && !bprop) {
>> +			pr_err("mandatory property %s not defined in the device tree\n",
>> +			       prop->name);
>> +			return -EINVAL;
>> +		}
>> +
>> +		if (bprop)
>> +			setup = 1;
>> +	} else {
>> +		u32 val;
>> +		int ret;
>> +
>> +		ret = ofnode_read_u32(node, prop->name, &val);
>> +		if (prop->mprop && ret) {
>> +			pr_err("mandatory property %s not defined in the device tree\n",
>> +			       prop->name);
>> +			return ret;
>> +		}
>> +
>> +		if (ret)
>> +			setup = prop->reset_val;
>> +		else if (prop->calculate)
>> +			setup = prop->calculate(ebi, cs, val);
>> +		else
>> +			setup = val;
>> +	}
>> +
>> +	return prop->set(ebi, prop, cs, setup);
>> +}
>> +
>> +static void stm32_fmc2_ebi_enable_bank(struct stm32_fmc2_ebi *ebi, int cs)
>> +{
>> +	setbits_le32(ebi->io_base + FMC2_BCR(cs), FMC2_BCR_MBKEN);
>> +}
>> +
>> +static void stm32_fmc2_ebi_disable_bank(struct stm32_fmc2_ebi *ebi, int cs)
>> +{
>> +	clrbits_le32(ebi->io_base + FMC2_BCR(cs), FMC2_BCR_MBKEN);
>> +}
>> +
>> +/* NWAIT signal can not be connected to EBI controller and NAND controller */
>> +static bool stm32_fmc2_ebi_nwait_used_by_ctrls(struct stm32_fmc2_ebi *ebi)
>> +{
>> +	unsigned int cs;
>> +	u32 bcr;
>> +
>> +	for (cs = 0; cs < FMC2_MAX_EBI_CE; cs++) {
>> +		if (!(ebi->bank_assigned & BIT(cs)))
>> +			continue;
>> +
>> +		bcr = readl(ebi->io_base + FMC2_BCR(cs));
>> +		if ((bcr & FMC2_BCR_WAITEN || bcr & FMC2_BCR_ASYNCWAIT) &&
>> +		    ebi->bank_assigned & BIT(FMC2_NAND))
>> +			return true;
>> +	}
>> +
>> +	return false;
>> +}
>> +
>> +static void stm32_fmc2_ebi_enable(struct stm32_fmc2_ebi *ebi)
>> +{
>> +	setbits_le32(ebi->io_base + FMC2_BCR1, FMC2_BCR1_FMC2EN);
>> +}
>> +
>> +static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi,
>> +				   ofnode node, u32 cs)
>> +{
>> +	unsigned int i;
>> +	int ret;
>> +
>> +	stm32_fmc2_ebi_disable_bank(ebi, cs);
>> +
>> +	for (i = 0; i < ARRAY_SIZE(stm32_fmc2_child_props); i++) {
>> +		const struct stm32_fmc2_prop *p = &stm32_fmc2_child_props[i];
>> +
>> +		ret = stm32_fmc2_ebi_parse_prop(ebi, node, p, cs);
>> +		if (ret) {
>> +			pr_err("property %s could not be set: %d\n",
>> +			       p->name, ret);
>> +			return ret;
>> +		}
>> +	}
>> +
>> +	stm32_fmc2_ebi_enable_bank(ebi, cs);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_parse_dt(struct udevice *dev,
>> +				   struct stm32_fmc2_ebi *ebi)
>> +{
>> +	ofnode child;
>> +	bool child_found = false;
>> +	u32 bank;
>> +	int ret;
>> +
>> +	dev_for_each_subnode(child, dev) {
>> +		ret = ofnode_read_u32(child, "reg", &bank);
>> +		if (ret) {
>> +			pr_err("could not retrieve reg property: %d\n", ret);
>> +			return ret;
>> +		}
>> +
>> +		if (bank >= FMC2_MAX_BANKS) {
>> +			pr_err("invalid reg value: %d\n", bank);
>> +			return -EINVAL;
>> +		}
>> +
>> +		if (ebi->bank_assigned & BIT(bank)) {
>> +			pr_err("bank already assigned: %d\n", bank);
>> +			return -EINVAL;
>> +		}
>> +
>> +		if (bank < FMC2_MAX_EBI_CE) {
>> +			ret = stm32_fmc2_ebi_setup_cs(ebi, child, bank);
>> +			if (ret) {
>> +				pr_err("setup chip select %d failed: %d\n",
>> +				       bank, ret);
>> +				return ret;
>> +			}
>> +		}
>> +
>> +		ebi->bank_assigned |= BIT(bank);
>> +		child_found = true;
>> +	}
>> +
>> +	if (!child_found) {
>> +		pr_warn("no subnodes found, disable the driver.\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	if (stm32_fmc2_ebi_nwait_used_by_ctrls(ebi)) {
>> +		pr_err("NWAIT signal connected to EBI and NAND controllers\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	stm32_fmc2_ebi_enable(ebi);
>> +
>> +	return 0;
>> +}
>> +
>> +static int stm32_fmc2_ebi_probe(struct udevice *dev)
>> +{
>> +	struct stm32_fmc2_ebi *ebi = dev_get_priv(dev);
>> +	struct reset_ctl reset;
>> +	int ret;
>> +
>> +	ebi->io_base = dev_read_addr(dev);
>> +	if (ebi->io_base == FDT_ADDR_T_NONE)
>> +		return -EINVAL;
>> +
>> +	ret = clk_get_by_index(dev, 0, &ebi->clk);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = clk_enable(&ebi->clk);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = reset_get_by_index(dev, 0, &reset);
>> +	if (!ret) {
>> +		reset_assert(&reset);
>> +		udelay(2);
>> +		reset_deassert(&reset);
>> +	}
>> +
>> +	return stm32_fmc2_ebi_parse_dt(dev, ebi);
>> +}
>> +
>> +static const struct udevice_id stm32_fmc2_ebi_match[] = {
>> +	{.compatible = "st,stm32mp1-fmc2-ebi"},
>> +	{ /* Sentinel */ }
>> +};
>> +
>> +U_BOOT_DRIVER(stm32_fmc2_ebi) = {
>> +	.name = "stm32_fmc2_ebi",
>> +	.id = UCLASS_NOP,
>> +	.of_match = stm32_fmc2_ebi_match,
>> +	.probe = stm32_fmc2_ebi_probe,
>> +	.priv_auto_alloc_size = sizeof(struct stm32_fmc2_ebi),
>> +	.bind = dm_scan_fdt_dev,
>> +};
> Reviewed-by: Patrice Chotard <patrice.chotard at st.com>
>
> Thanks
>
> Patrice
>


More information about the U-Boot mailing list