[PATCH v1 00/16] Enable ARM Trusted Firmware for U-Boot
Simon Goldschmidt
simon.k.r.goldschmidt at gmail.com
Mon Aug 17 06:49:08 CEST 2020
Chee Hong Ang <chee.hong.ang at intel.com> schrieb am Mo., 17. Aug. 2020,
06:34:
> Repost of the following patchs:
> https://lists.denx.de/pipermail/u-boot/2020-March/402705.html
If this is a repost, please send as such instead of sending as a new series
v1.
Regards,
Simon
>
> New U-boot flow with ARM Trusted Firmware (ATF) support:
> SPL (EL3) -> ATF-BL31 (EL3) -> U-Boot Proper (EL2) -> Linux (EL1)
>
> SPL loads the u-boot.itb which consist of:
> 1) u-boot-nodtb.bin (U-Boot Proper image)
> 2) u-boot.dtb (U-Boot Proper DTB)
> 3) bl31.bin (ATF-BL31 image)
>
> Supported Platform: Intel SoCFPGA 64bits (Stratix10 & Agilex)
>
> Now, U-Boot Proper is running in non-secure mode (EL2), it invokes
> SMC/PSCI calls provided by ATF to perform COLD reset, System Manager
> register accesses and mailbox communications with Secure Device Manager
> (SDM).
>
> Steps to build the U-Boot with ATF support:
> 1) Build U-Boot
> 2) Build ATF BL31
> 3) Copy ATF BL31 binary image into U-Boot's root folder
> 4) "make u-boot.itb" to generate u-boot.itb
>
> These patchsets have dependency on:
> arm: socfpga: soc64: Add timeout waiting for NOC idle ACK
> https://lists.denx.de/pipermail/u-boot/2020-August/423029.html
>
> Rename Stratix10 FPGA driver and support Agilex
> https://lists.denx.de/pipermail/u-boot/2020-August/422798.html
>
> SoCFPGA mailbox driver fixes and enhancements
> https://lists.denx.de/pipermail/u-boot/2020-August/423140.html
>
> arm: socfpga: soc64: Initialize timer in SPL only
> https://lists.denx.de/pipermail/u-boot/2020-July/419692.html
>
> arm: socfpga: soc64: Remove PHY interface setup from misc arch init
> https://lists.denx.de/pipermail/u-boot/2020-July/419690.html
>
> Enable sysreset support for SoCFPGA SoC64 platforms
> https://lists.denx.de/pipermail/u-boot/2020-August/422509.html
>
> arm: socfpga: soc64: Disable CONFIG_PSCI_RESET
> https://lists.denx.de/pipermail/u-boot/2020-August/423373.html
>
> Chee Hong Ang (16):
> arm: socfpga: soc64: Remove CONFIG_OF_EMBED
> arm: socfpga: soc64: Add FIT generator script for pack itb with ATF
> arm: socfpga: Add function for checking description from FIT image
> arm: socfpga: soc64: Load FIT image with ATF support
> arm: socfpga: soc64: Override 'lowlevel_init' to support ATF
> arm: socfpga: Disable "spin-table" method for booting Linux
> arm: socfpga: soc64: Add SMC helper function for Intel SOCFPGA
> (64bits)
> arm: socfpga: soc64: Define SMC function identifiers for PSCI SiP
> services
> mmc: dwmmc: socfpga: Add ATF support for MMC driver
> net: designware: socfpga: Add ATF support for MAC driver
> arm: socfpga: soc64: Add ATF support for Reset Manager driver
> arm: socfpga: soc64: Add ATF support for FPGA reconfig driver
> arm: socfpga: mailbox: Add 'SYSTEM_RESET' PSCI support to
> mbox_reset_cold()
> arm: socfpga: soc64: SSBL shall not setup stack on OCRAM
> arm: socfpga: soc64: Skip handoff data access in SSBL
> configs: socfpga: Add defconfig for Agilex and Stratix 10 with ATF
> support
>
> arch/arm/mach-socfpga/Kconfig | 2 -
> arch/arm/mach-socfpga/Makefile | 4 +
> arch/arm/mach-socfpga/board.c | 12 +-
> arch/arm/mach-socfpga/include/mach/smc_api.h | 13 +
> arch/arm/mach-socfpga/lowlevel_init_soc64.S | 76 +++
> arch/arm/mach-socfpga/mailbox_s10.c | 5 +
> arch/arm/mach-socfpga/reset_manager_s10.c | 10 +
> arch/arm/mach-socfpga/smc_api.c | 56 ++
> arch/arm/mach-socfpga/wrap_pll_config_s10.c | 3 +-
> board/altera/soc64/fit_spl_atf.sh | 91 +++
> ...defconfig => socfpga_agilex_atf_defconfig} | 25 +-
> configs/socfpga_agilex_defconfig | 1 -
> ...config => socfpga_stratix10_atf_defconfig} | 25 +-
> configs/socfpga_stratix10_defconfig | 1 -
> drivers/fpga/intel_sdm_mb.c | 139 +++++
> drivers/mmc/socfpga_dw_mmc.c | 20 +
> drivers/net/dwmac_socfpga.c | 43 +-
> include/configs/socfpga_soc64_common.h | 9 +
> include/linux/intel-smc.h | 573 ++++++++++++++++++
> 19 files changed, 1078 insertions(+), 30 deletions(-)
> create mode 100644 arch/arm/mach-socfpga/include/mach/smc_api.h
> create mode 100644 arch/arm/mach-socfpga/lowlevel_init_soc64.S
> create mode 100644 arch/arm/mach-socfpga/smc_api.c
> create mode 100755 board/altera/soc64/fit_spl_atf.sh
> copy configs/{socfpga_agilex_defconfig => socfpga_agilex_atf_defconfig}
> (77%)
> copy configs/{socfpga_stratix10_defconfig =>
> socfpga_stratix10_atf_defconfig} (80%)
> create mode 100644 include/linux/intel-smc.h
>
> --
> 2.19.0
>
>
More information about the U-Boot
mailing list